How to use the google play RSA code on a Mac?
Hi,
I´ve just finished my first Android App using Flash CC and I´d like to upload it to the Google Play Store.
Now Google says there is a RSA-Key Code I have to use ... somehow.
Can anyone tell me what I´ve got to do with it? And please explain it for Dummies
I´ve been searching for some hours now, but I didn´t find anything helpful / anything I could work with. Most Tutorials and Instructions are for FlashBuilder or PC users. Nothing I could use or even understand
I´m working on a Mac using Flash CC - so I´m stuck right now.
So please - HELP ME!
Best regards
Jan
Hi Pahup,
Thank you for your reply!!
I adapted an Android App using Flash CC on a Mac. I already published this App for the Apple App Store. When I published the App for Android I chose Air 3.7.xxx for Android. I also created the p12 certificate using Flash CC in the publishing settigns for Android. So my App is theoretically finished and ready for Upload.
When I went to the Google Play Store Developer Console I had the options to
1.) Upload APK
or
2.) Prepare Store Entry
...so I prepared the Store entry first. When I go to "APK"-Tab in the console it looks like this:
... it says "Upload APK" and the Button below "Get Licence Key". When I click on the license Key Button it looks like this:
So I think I should enter this RSA-Key somehow into my App BEFORE uploading it to the Google Play Store. This is recommended when an Ap is set to be paid. My Application is set to paid.
I did not use any kind of licensing API (until now - cause I don´t know how and what it is for)
This is all new to me. It is the first App I want to bringt to the Android market. I really hoped it would be as easy as getting an app into the Apple App Store. I found so many step by step instructions for dummies on "How to get an Flash iOS App into the App Store plus creating all the certificates needed", so I thought it would be the same for Android. But there is no help at all at the moment. I am totally confused.
So any help, hint or instrusction would be great!!
By the way - this is the App I want to get into the Google Play Store
Similar Messages
-
How to use the Google Android Emulator in Flash Builder on Windows 7?
I want to try out Flash Builder to create an app, but I cannot find out how to use the Google Android Emulator in Flash Builder. The simulators in Flash Builder work, and the android emulator is installed correctly and can run. I just can't seem to connect them. How do I do that?
Hi Pahup,
Thank you for your reply!!
I adapted an Android App using Flash CC on a Mac. I already published this App for the Apple App Store. When I published the App for Android I chose Air 3.7.xxx for Android. I also created the p12 certificate using Flash CC in the publishing settigns for Android. So my App is theoretically finished and ready for Upload.
When I went to the Google Play Store Developer Console I had the options to
1.) Upload APK
or
2.) Prepare Store Entry
...so I prepared the Store entry first. When I go to "APK"-Tab in the console it looks like this:
... it says "Upload APK" and the Button below "Get Licence Key". When I click on the license Key Button it looks like this:
So I think I should enter this RSA-Key somehow into my App BEFORE uploading it to the Google Play Store. This is recommended when an Ap is set to be paid. My Application is set to paid.
I did not use any kind of licensing API (until now - cause I don´t know how and what it is for)
This is all new to me. It is the first App I want to bringt to the Android market. I really hoped it would be as easy as getting an app into the Apple App Store. I found so many step by step instructions for dummies on "How to get an Flash iOS App into the App Store plus creating all the certificates needed", so I thought it would be the same for Android. But there is no help at all at the moment. I am totally confused.
So any help, hint or instrusction would be great!!
By the way - this is the App I want to get into the Google Play Store -
How to use the google search from inside a java program
Hi guys
How can i use google search in my java program?
What will be the type of the reply i get back from google?
Thanks in advance
[http://javamilestone.blogspot.com/|http://javamilestone.blogspot.com/]Hi,
You have here some examples about how to make search on google from a Java application.
The type of reply is JSON
Here some documentation about it:
[http://code.google.com/apis/ajaxsearch/documentation/#fonje|http://code.google.com/apis/ajaxsearch/documentation/#fonje]
And here some snippets:
[http://code.google.com/apis/ajaxsearch/documentation/#fonje_snippets|http://code.google.com/apis/ajaxsearch/documentation/#fonje_snippets]
Regards,
David. -
How to use the XULRunner with JAVA Code
Hi, all
I have a big problem about XULRunner. I can not find a nice solution on the internet. So I have to request you to give me some ideas.
We know the XULRunner is nice solution when we want to embed a browser into desktop program which is thunderbird, firefox and so on.
My questions are the following:
1. Can I execute a Java function accross the JAVASCript? We can execute javascript code in the JAVA, but I'm not sure I can do opposite it.
2. What is javaxpcom?
If you did program like this, please give me some ideas, thanks very much.I marked this as "off-topic" since it's not a Firefox support question.
Another place for discussion related to XULRunner, besides the Mozilla community links at https://developer.mozilla.org/en-US/docs/Mozilla/Projects/XULRunner might be one of the [http://forums.mozillazine.org/ MozillaZine forums], such as the Mozilla Development forum:
*http://forums.mozillazine.org/viewforum.php?f=27
EDIT: I'm leaving this question open since it's about another Mozilla product and I'm escalating it to the Helpdesk in case anyone over there has a suggestion. -
How to use the t-code vf31 tor taking print out of invoice
Hi,
How to use the t-code vf31 for taking print out,am getting an error like no message for initial processing exist,
venuHi,
Please find the steps
Output type RD00
Transmission medium 1
Sort order 01
Processing mode 1
Please give the oppropriate fields,
if the still error persists check the configuration in NACE transaction code.
thanks
Kuntla -
How to Use the JAVA SCRIPT code in .htm page of the component
Hi .
In my requirement i have to use Java Script Function in .htm code ..how to use the java script code and functions in .htm???
thank you
B.ManiCheck this document [Arun's Blog|http://wiki.sdn.sap.com/wiki/display/CRM/CRMWebClientUI-TalkingwithJava+Script]
Regards
Kavindra -
how to use the apple store? is there any google account needed? cause in my phone gmail requires.. help please
raynee88 wrote:
how to use the apple store?
What is an Apple ID?
How do I get an Apple ID?
From here > http://support.apple.com/kb/HT5622 -
I don't know how to use the canlendars function and the notes are kind of messy code,anyone help me
i don't know how to use the canlendars function and the notes are kind of messy code,anyone help me
Step by step:
1. On your main vi Front Panel, create your boolean indicator.
2. On the block diagram, right click the new boolean indicator and select Create - Reference.
3. On sub-vi front panel, create boolean indicator (or use one that is already created).
4. On sub-vi front panel, create a reference (Controls Palette - Refnum - Control Refnum).
5. Right click on the newly created Refnum and select Select Vi Server Class - Generic - GObject - Control - Boolean. The refnum label changes to BoolRefnum.
6. On sub-vi block diagram, create Property Node (Functions - Application Control - Property Node). Find the BoolRefnum and move it close to the new Property Node.
7. Wire the BoolRefnum to the reference input of the property node.
8.
Right click on the property node and select Change to All Write.
9. Move mouse to point to Visible inside property node box, left click and select Value.
10. Wire the boolean indicator from step 3 to the Value input of the property node.
11. On sub-vi front panel, right click on icon and select Show Connector.
12. Click on empty connector spot then click on the new BoolRefnum. Save your sub-vi.
13. On main vi block diagram, connect refernece created in step 2 to the new connector terminal of sub-vi.
14. Save and run.
Here are the modified vi's.
- tbob
Inventor of the WORM Global
Attachments:
Pass_a_Reference.vi 20 KB
GL_Flicker_mod.vi 83 KB -
How would I go about adding multiple rectangles using the same lines of code?
How would I go about adding multiple rectangles using the same lines of code? I would prefer to just run through a set of code every time I need a polygon. If I just have to create multiple polygon adding statements that's fine but I'd prefer just 1.
>>How would I go about adding multiple rectangles using the same lines of code?
You could create a method that creates and returns x number of Rectangle elements:
public IEnumerable<Rectangle> CreateRectangles(int numberOfRectsToCreate)
for (int i = 0; i < numberOfRectsToCreate; ++i)
Rectangle rect = new Rectangle();
rect.Fill = Brushes.Blue;
rect.Width = 100;
rect.Height = 100;
yield return rect;
..and then call this method from anywhere in your code:
IEnumerable<Rectangle> rects = CreateRectangles(5);
foreach (Rectangle rect in rects)
//add to StackPanel or do whatever with the Rectangle elements:
yourStackPanel.Children.Add(rect);
>>If I just have to create multiple polygon adding statements that's fine but I'd prefer just 1.
When adding Point objects to a Polygon you can only add one per call to the Add method but you could call the Add method inside a loop, e.g:
for(int i = 0; i < 10; ++i)
//add to StackPanel or do whatever with the Rectangle elements:
Polygon p = new Polygon();
p.Points.Add(new Point());
Please remember to close your threads by marking helpful posts as answer and then start a new thread if you have a new question. Please don't post several questions in the same thread. -
How to use the LAN NetStream for peer transmission, please help, write a sample code
How to use the LAN NetStream for peer transmission, please help, write a sample code
No reply, I reply, Oh
-
How to use hamachi to play LAN games?
We (group of 7 friends) played blur by connecting to same wi-fi. What we usually do is create a wi-fi hotspot on a mobile (keeping the data pack off, so no internet access, this is what I like to call offline LAN, all friends connected to the same wi-fi which actually has no internet access), everyone connects to the hotspot. Go to the multiplayer tab on blur, go to LAN, one friend hosts a game, everyone connects to it and starts playing. No other third party softwares like hamachi or tunngle or anything else required. Now we want to play Garrys mod (prop hunt to be precise), but the approach as above does not work with this new game. We all got hamachi, it would not power on untill we turn the data pack of the mobile wi-fi hotspot ON. Is there any way we could play prop hunt the above way? The offline LAN way??
Hi Pahup,
Thank you for your reply!!
I adapted an Android App using Flash CC on a Mac. I already published this App for the Apple App Store. When I published the App for Android I chose Air 3.7.xxx for Android. I also created the p12 certificate using Flash CC in the publishing settigns for Android. So my App is theoretically finished and ready for Upload.
When I went to the Google Play Store Developer Console I had the options to
1.) Upload APK
or
2.) Prepare Store Entry
...so I prepared the Store entry first. When I go to "APK"-Tab in the console it looks like this:
... it says "Upload APK" and the Button below "Get Licence Key". When I click on the license Key Button it looks like this:
So I think I should enter this RSA-Key somehow into my App BEFORE uploading it to the Google Play Store. This is recommended when an Ap is set to be paid. My Application is set to paid.
I did not use any kind of licensing API (until now - cause I don´t know how and what it is for)
This is all new to me. It is the first App I want to bringt to the Android market. I really hoped it would be as easy as getting an app into the Apple App Store. I found so many step by step instructions for dummies on "How to get an Flash iOS App into the App Store plus creating all the certificates needed", so I thought it would be the same for Android. But there is no help at all at the moment. I am totally confused.
So any help, hint or instrusction would be great!!
By the way - this is the App I want to get into the Google Play Store -
How can I install google play on my BBZ10? help?
I trying to play some games but in order for me be able to use them properly I need google play on my devices.. How can I get google play on my BBZ10?? help?
You can get Google Play service, you have to update to 10.3.
There is an article on CrackBerry, Cobalt's Google Apps Landing, that has complete instructions on installing 10.3 and the GP services.
Even though Verizon is giving the update, the leaks have been released by Chen & Co and they are stable.
The Amazon App Store is good.. but Snap is better (also on CrackBerry) :-)
Kim
~Rockin' a completely customized Z10 with all the greatness BB has to offer -
How to use the same POWL query for multiple users
Hello,
I have defined a POWL query which executes properly. But if I map the same POWL query to 2 portal users and the 2 portal users try to access the same page simultaneously then it gives an error message to one of the users that
"Query 'ABC' is already open in another session."
where 'ABC' is the query name.
Can you please tell me how to use the same POWL query for multiple users ?
A fast reply would be highly appreciated.
Thanks and Regards,
SandhyaBatch processing usually involves using actions you have recorded. In Action you can insert Path that can be used during processing documents. Path have some size so you may want to only process document that have the same size. Look in the Actions Palette fly-out menu for insert path. It inserts|records the current document work path into the action being worked on and when the action is played it inserts the path into the document as the current work path..
-
I am using the old imovie HD on my old Mac laptop... it works fine, but when I export a video to YouTube there is a black frame around it.. how do i get rid of that? thanks!
Hi MyAppleID99,
You may want to check to make sure the clip hasn't been moved back and forth between wide screen and standard aspect ratios; sometimes a combination of letterboxing and pillarboxing can lead to a black frame "windowbox" when playing the final video. You may find the following article helpful:
Apple Support: What are Letterboxing, Pillarboxing and Windowboxing?
http://support.apple.com/kb/ht2320
Regards,
- Brenden -
How to improve the performance of this code
Hi gurus
code is given below with LDB
this code look big but most of lines are commented
plz help its urgent
thanks in advance
*& Report ZSALES_RECON
REPORT ZSALES_RECON.
TYPE-POOLS : SLIS.
nodes: bseg , bkpf.
data : begin of zbseg occurs 0,
kunnr like bseg-kunnr,
*lifnr like bseg-lifnr,
dmbtr like bseg-dmbtr,
*shkzg like bseg-shkzg,
*gsber like bseg-gsber,
bschl like bseg-bschl,
*sgtxt like bseg-sgtxt,
total like bseg-dmbtr,
hkont like bseg-hkont,
BUDAT LIKE Bkpf-BUDAT,
belnr LIKE BSEG-belnr,
cash like bseg-dmbtr,
credit like bseg-dmbtr,
abn_voucher like bseg-dmbtr,
barista_voucher like bseg-dmbtr,
accor like bseg-dmbtr,
sodexho like bseg-dmbtr,
gift like bseg-dmbtr,
corp like bseg-dmbtr,
card like bseg-dmbtr,
miscellaneous like bseg-dmbtr,
werks like bseg-werks,
gjahr like bseg-gjahr,
SR_NO TYPE I,
shkzg like bseg-shkzg,
end of zbseg,
TP_TBL_DATA like ZBSEG.
DATA : idx TYPE sy-tabix.
Report data to be shown.
data: it_data like ZBSEG.
Heading of the report.
data: t_heading type slis_t_listheader.
AT SELECTION-SCREEN.
get bkpf.
START-OF-SELECTION.
data : sum_mis like bseg-dmbtr,
sum_abn like bseg-dmbtr,
sum_cash like bseg-dmbtr,
sum_credit like bseg-dmbtr,
sum_card like bseg-dmbtr,
sum_barista_voucher like bseg-dmbtr,
sum_accor like bseg-dmbtr,
sum_sodexho like bseg-dmbtr,
sum_gift like bseg-dmbtr,
sum_corp like bseg-dmbtr.
data : wa1_total like bseg-dmbtr.
data : wa_belnr like bseg-belnr,
wa_kunnr like bseg-kunnr,
wa_werks like bseg-werks,
belnr1 like bseg-belnr,
wa_sr_no type i.
GET BSEG.
data : wa like line of zbseg.
data : count type i,
count1 type i.
move-corresponding bseg to zbseg.
*idx = sy-tabix.
on change of zbseg-belnr.
wa_kunnr = zbseg-kunnr.
wa_kunnr = wa_kunnr+6(4).
select single werks into wa_werks from bseg where belnr = zbseg-belnr
and kunnr = '' and gjahr = zbseg-gjahr.
if wa_kunnr = wa_werks.
if zbseg-bschl <> '01'.
clear: sum_mis,wa1_total,sum_abn,sum_cash,sum_credit,sum_card,
sum_barista_voucher,sum_accor,sum_sodexho,sum_gift,sum_corp.
wa-BUDAT = BKPF-BUDAT.
wa-bschl = zbseg-bschl.
wa-hkont = zbseg-hkont.
wa-belnr = zbseg-belnr.
wa_belnr = wa-belnr.
wa-shkzg = zbseg-shkzg.
wa-kunnr = zbseg-kunnr.
count = wa-sr_no.
*wa-sr_no = count + 1.
idx = idx + 1.
append wa to zbseg.
**count = wa-sr_no.
*wa-sr_no = wa-sr_no + 1.
clear wa-total.
endif.
endif.
endon.
*clear : wa1_total.
if wa_belnr = zbseg-belnr.
loop at zbseg into wa.
wa-total = wa1_total.
wa-bschl = zbseg-bschl.
wa-hkont = zbseg-hkont.
count = sy-tabix.
wa-sr_no = count.
count1 = count.
*wa_sr_no = count.
modify zbseg from wa transporting sr_no.
IF wa-bschl eq '40' and wa-hkont eq '0024013020'.
if sy-tabix = 1.
wa-cash = zbseg-dmbtr.
sum_cash = sum_cash + wa-cash.
wa-cash = sum_cash.
modify zbseg index idx from wa transporting cash.
endif.
endif.
IF wa-bschl eq '40' and wa-hkont eq '0026060010'.
if sy-tabix = 1.
wa-credit = zbseg-dmbtr.
sum_credit = sum_credit + wa-credit.
wa-credit = sum_credit.
modify zbseg index idx from wa transporting credit.
endif.
endif.
IF wa-bschl eq '40' and wa-hkont eq '0026060015'.
if sy-tabix = 1.
wa-abn_voucher = zbseg-dmbtr.
sum_abn = sum_abn + wa-abn_voucher.
wa-abn_voucher = sum_abn.
modify zbseg index idx from wa transporting abn_voucher.
endif.
endif.
IF wa-bschl eq '40' and wa-hkont eq '0026060017'.
if sy-tabix = 1.
wa-barista_voucher = zbseg-dmbtr.
sum_barista_voucher = sum_barista_voucher + wa-barista_voucher.
wa-barista_voucher = sum_barista_voucher.
modify zbseg index idx from wa transporting barista_voucher.
endif.
endif.
IF wa-bschl eq '40' and wa-hkont eq '0026060020'.
if sy-tabix = 1.
wa-sodexho = zbseg-dmbtr.
sum_sodexho = sum_sodexho + wa-sodexho.
wa-sodexho = sum_sodexho.
modify zbseg index idx from wa transporting sodexho.
endif.
endif.
IF wa-bschl eq '40' AND wa-hkont eq '0026060030'.
if sy-tabix = 1.
wa-accor = zbseg-dmbtr.
sum_accor = sum_accor + wa-accor.
wa-accor = sum_accor.
modify zbseg index idx from wa transporting accor.
endif.
endif.
IF wa-bschl eq '40' AND wa-hkont eq '0026070040'.
if sy-tabix = 1.
wa-gift = zbseg-dmbtr.
sum_gift = sum_gift + wa-gift.
wa-gift = sum_gift.
modify zbseg index idx from wa transporting gift.
endif.
endif.
IF wa-bschl eq '40' AND wa-hkont eq '0026060070'.
if sy-tabix = 1.
wa-card = zbseg-dmbtr.
sum_card = sum_card + wa-card.
wa-card = sum_card.
modify zbseg index idx from wa transporting card.
endif.
endif.
IF wa-bschl eq '40' AND wa-hkont eq '0026060018'.
if sy-tabix = 1.
wa-corp = zbseg-dmbtr.
sum_corp = sum_corp + wa-corp.
wa-corp = sum_corp.
modify zbseg index idx from wa transporting corp.
endif.
endif.
*IF wa-bschl eq '11' .
*wa-total = zbseg-dmbtr.
*modify zbseg index idx from wa transporting total.
*endif.
IF wa-bschl EQ '40' or wa-bschl = '01' .
if sy-tabix = 1.
wa-total = zbseg-dmbtr.
wa1_total = wa1_total + wa-total.
wa-total = wa1_total.
*if idx = 2.
*modify zbseg index 1 from wa transporting total.
*else.
modify zbseg index idx from wa transporting total.
*endif.
endif.
endif.
*IF zbseg-TOTAL NE zbseg-DMBTR.
IF wa-BSCHL NE '11' AND wa-BSCHL NE '40'. "AND wa-BSCHL NE '01'.
if sy-tabix = 1.
if wa-shkzg = 'S'.
wa-miscellaneous = - wa-miscellaneous.
endif.
wa-miscellaneous = ZBSEG-DMBTR.
sum_mis = sum_mis + wa-miscellaneous.
wa-miscellaneous = sum_mis.
modify zbseg index idx from wa transporting miscellaneous.
endif.
ENDIF.
*wa1-miscellaneous = wa-miscellaneous.
*modify zbseg index idx from wa.
*ENDIF.
*append wa to zbseg.
*clear:zbseg-dmbtr.
endloop.
endif.
*****endif.
*****endon.
*ENDFORM.
*append zbseg.
*endloop.
End-of-selection.
perform build_alv using zbseg t_heading.
*& Form build_alv
Builds and display the ALV Grid.
form build_alv using t_data
*tp_tbl_data
t_heading type slis_t_listheader.
ALV required data objects.
data: w_title type lvc_title,
w_repid type syrepid,
w_comm type slis_formname,
w_status type slis_formname,
x_layout type slis_layout_alv,
t_event type slis_t_event,
t_fieldcat type slis_t_fieldcat_alv,
t_sort type slis_t_sortinfo_alv.
refresh t_fieldcat.
refresh t_event.
refresh t_sort.
clear x_layout.
clear w_title.
Field Catalog
perform set_fieldcat2 using:
1 'SR_NO' 'SR_NO' 'BKPF' '5' space space 'SR NO' space space space
space space space space space t_fieldcat ,
2 'BELNR' 'BELNR' 'BKPF' '10' space space 'Document No' space space
space space space space space space t_fieldcat ,
3 'BUDAT' 'BUDAT' 'BKPF' '10' space space 'Document Date' space
space space space space space space space t_fieldcat ,
4 'KUNNR' space space space space space 'Site' space space
space space space space space space t_fieldcat ,
5 'TOTAL' space 'BSEG' space space space 'Total' space space space
space space space space 'X' t_fieldcat ,
6 'CASH' 'CASH' 'BSEG' space space space 'Cash Sales'
space space space space space space space 'X' t_fieldcat ,
7 'CREDIT' 'CREDIT' 'BSEG' space space space 'Credit Card'
space space space space space space space 'X' t_fieldcat ,
8 'ABN_VOUCHER' space 'BSEG' space space space 'ABN Voucher' space
space
space space space space space 'X' t_fieldcat ,
9 'BARISTA_VOUCHER' space 'BSEG' '15' space space 'BARISTA Voucher'
space space
space space space space space 'X' t_fieldcat ,
10 'CORP' 'CORP' 'BSEG' space space space 'ABN Corp' space space
space space space space space 'X' t_fieldcat ,
11 'SODEXHO' 'SODEXHO' 'BSEG' space space space 'Sodexho' space
space space space space space space 'X' t_fieldcat ,
12 'ACCOR' 'ACCOR' 'BSEG' space space space 'Accor'
space space space space space space space 'X' t_fieldcat ,
13 'GIFT' 'GIFT' 'BSEG' space space space 'Gift Coupon'
space space space space space space space 'X' t_fieldcat ,
14 'CARD' 'CARD' 'BSEG' space space space 'Diners Card' space
space space space space space space 'X' t_fieldcat ,
15 'MISCELLANEOUS' space 'BKPF' '18' space space
'Miscellaneous Income' space space space space space space space 'X'
t_fieldcat .
*14 'KBETR' 'KBETR' 'KONP' '10' space space 'Tax %age' space space
*space space space space space space t_fieldcat ,
*15 'MWSKZ1' 'MWSKZ1' 'RBKP' space space space 'Tax Type' space
*space
space space space space space space t_fieldcat ,
*16 'AMT' 'AMT' 'RBKP' space space space 'Amount Payable' space
*space
space space space space space 'X' t_fieldcat ,
*17 'WERKS' 'SITE' 'RSEG' space space space 'State' space space
*space space space space space space t_fieldcat .
*18 'GSBER' 'GSBER' 'RBKP' space space space 'Business Area' space
*space space space space space space space t_fieldcat .
Layout
x_layout-zebra = 'X'.
Top of page heading
perform set_top_page_heading using t_heading t_event.
Events
perform set_events using t_event.
GUI Status
w_status = ''.
w_repid = sy-repid.
Title
w_title = <<If you want to set a title for
the ALV, please, uncomment and edit this line>>.
User commands
w_comm = 'USER_COMMAND'.
Order
Example
PERFORM set_order USING '<field>' 'IT_DATA' 'X' space space t_sort.
Displays the ALV grid
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_callback_program = w_repid
it_fieldcat = t_fieldcat
is_layout = x_layout
it_sort = t_sort
i_callback_pf_status_set = w_status
i_callback_user_command = w_comm
i_save = 'X'
it_events = t_event
i_grid_title = w_title
tables
t_outtab = zbseg
t_data
exceptions
program_error = 1
others = 2.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
endform. " build_alv.
*& Form set_top_page_heading
Creates the report headings.
form set_top_page_heading using t_heading type slis_t_listheader
t_events type slis_t_event.
data: x_heading type slis_listheader,
x_event type line of slis_t_event.
Report title
clear t_heading[].
clear x_heading.
x_heading-typ = 'H'.
x_heading-info = 'SALES RECONCILIATION REPORT'(001).
append x_heading to t_heading.
Top of page event
x_event-name = slis_ev_top_of_page.
x_event-form = 'TOP_OF_PAGE'.
append x_event to t_events.
endform.
*& Form set_events
Sets the events for ALV.
The TOP_OF_PAGE event is alredy being registered in
the set_top_page_heading subroutine.
form set_events using t_events type slis_t_event.
data: x_event type line of slis_t_event.
Example
clear x_event.
x_event-name = .
x_event-form = .
append x_event to t_event.
endform.
*& Form set_order
Adds an entry to the order table.
FORM set_order USING p_fieldname p_tabname p_up p_down p_subtot
t_sort TYPE slis_t_sortinfo_alv.
DATA: x_sort TYPE slis_sortinfo_alv.
CLEAR x_sort.
x_sort-fieldname = p_fieldname.
x_sort-tabname = p_tabname.
x_sort-up = p_up.
x_sort-down = p_down.
x_sort-subtot = p_subtot.
APPEND x_sort TO t_sort.
ENDFORM. "set_order
*& Form set_fieldcat2
Adds an entry to the field catalog.
p_colpos: Column position.
p_fieldname: Field of internal table which is being described by
* this record of the field catalog.
p_ref_fieldname: (Optional) Table field / data element which
* describes the properties of the field.
* If this field is not given, it is copied from
* the fieldname.
p_ref_tabname: (Optional) Table which holds the field referenced
* by <<p_ref_fieldname>>.
If this is not given, the parameter
<<p_ref_fieldname>> references a data element.
p_outputlen: (Optional) Column width.
p_noout: (Optional) If set to 'X', states that the field is not
* showed initially. If so, the field has to be
included in the report at runtime using the display
options.
p_seltext_m: (Optional) Medium label to be used as column header.
p_seltext_l: (Optional) Long label to be used as column header.
p_seltext_s: (Optional) Small label to be used as column header.
p_reptext_ddic: (Optional) Extra small (heading) label to be
* used as column header.
p_ddictxt: (Optional) Set to 'L', 'M', 'S' or 'R' to select
whether to use SELTEXT_L, SELTEXT_M, SELTEXT_S,
or REPTEXT_DDIC as text for column header.
p_hotspot: (Optional) If set to 'X', this field will be used
* as a hotspot area for cursor, alolowing the user
* to click on the field.
p_showasicon: (Optional) If set to 'X', this field will be shown
as an icon and the contents of the field will set
* which icon to show.
p_checkbox: (Optional) If set to 'X', this field will be shown
as a checkbox.
p_edit: (Optional) If set to 'X', this field will be editable.
p_dosum: (Optional) If set to 'X', this field will be summed
(aggregation function) according to the grouping set
by the order functions.
t_fieldcat: Table which contains the whole fieldcat.
FORM set_fieldcat2 USING
p_colpos p_fieldname p_ref_fieldname p_ref_tabname
p_outputlen p_noout
p_seltext_m p_seltext_l p_seltext_s p_reptext_ddic p_ddictxt
p_hotspot p_showasicon p_checkbox p_edit
p_dosum
t_fieldcat TYPE slis_t_fieldcat_alv.
DATA: wa_fieldcat TYPE slis_fieldcat_alv.
CLEAR wa_fieldcat.
General settings
wa_fieldcat-fieldname = p_fieldname.
wa_fieldcat-col_pos = p_colpos.
wa_fieldcat-no_out = p_noout.
wa_fieldcat-hotspot = p_hotspot.
wa_fieldcat-checkbox = p_checkbox.
wa_fieldcat-icon = p_showasicon.
wa_fieldcat-do_sum = p_dosum.
Set reference fieldname, tablenam and rollname.
If p_ref_tabname is not given, the ref_fieldname given
is a data element.
If p_ref_tabname is given, the ref_fieldname given is a
field of a table.
In case ref_fieldname is not given,
it is copied from the fieldname.
IF p_ref_tabname IS INITIAL.
wa_fieldcat-rollname = p_ref_fieldname.
ELSE.
wa_fieldcat-ref_tabname = p_ref_tabname.
IF p_ref_fieldname EQ space.
wa_fieldcat-ref_fieldname = wa_fieldcat-fieldname.
ELSE.
wa_fieldcat-ref_fieldname = p_ref_fieldname.
ENDIF.
ENDIF.
Set output length.
IF NOT p_outputlen IS INITIAL.
wa_fieldcat-outputlen = p_outputlen.
ENDIF.
Set text headers.
IF NOT p_seltext_m IS INITIAL.
wa_fieldcat-seltext_m = p_seltext_m.
ENDIF.
IF NOT p_seltext_l IS INITIAL.
wa_fieldcat-seltext_l = p_seltext_l.
ENDIF.
IF NOT p_seltext_s IS INITIAL.
wa_fieldcat-seltext_s = p_seltext_s.
ENDIF.
IF NOT p_reptext_ddic IS INITIAL.
wa_fieldcat-reptext_ddic = p_reptext_ddic.
ENDIF.
IF NOT p_ddictxt IS INITIAL.
wa_fieldcat-ddictxt = p_ddictxt.
ENDIF.
Set as editable or not.
IF NOT p_edit IS INITIAL.
wa_fieldcat-input = 'X'.
wa_fieldcat-edit = 'X'.
ENDIF.
APPEND wa_fieldcat TO t_fieldcat.
ENDFORM. "set_fieldcat2
======================== Subroutines called by ALV ================
*& Form top_of_page
Called on top_of_page ALV event.
Prints the heading.
form top_of_page.
call function 'REUSE_ALV_COMMENTARY_WRITE'
exporting
i_logo = <<If you want to set a logo, please,
uncomment and edit this line>>
it_list_commentary = t_heading.
endform. " alv_top_of_page
*& Form user_command
Called on user_command ALV event.
Executes custom commands.
form user_command using r_ucomm like sy-ucomm
rs_selfield type slis_selfield.
Example Code
Executes a command considering the sy-ucomm.
CASE r_ucomm.
WHEN '&IC1'.
Set your "double click action" response here.
Example code: Create and display a status message.
DATA: w_msg TYPE string,
w_row(4) TYPE n.
w_row = rs_selfield-tabindex.
CONCATENATE 'You have clicked row' w_row
'field' rs_selfield-fieldname
'with value' rs_selfield-value
INTO w_msg SEPARATED BY space.
MESSAGE w_msg TYPE 'S'.
ENDCASE.
End of example code.
endform. "user_command
*********************************ldb code start from here *************************************************************
DATABASE PROGRAM OF LOGICAL DATABASE ZBRM_3
top-include and nxxx-include are generated automatically
Do NOT change their names manually!!!
*include DBZBRM_3TOP . " header
*include DBZBRM_3NXXX . " all system routines
include DBZBRM_3F001 . " user defined include
PROGRAM SAPDBZBRM_3 DEFINING DATABASE ZBRM_3.
TABLES:
BKPF,
BSEG.
Hilfsfelder
DATA:
BR_SBUKRS LIKE BKPF-BUKRS,
BR_SBELNR LIKE BKPF-BELNR,
BR_SGJAHR LIKE BKPF-GJAHR,
BR_SBUDAT LIKE BKPF-BUDAT,
BR_SGSBER LIKE BSEG-GSBER.
BR_SBUZEI LIKE BSEG-BUZEI,
BR_SEBELN LIKE BSEG-EBELN,
BR_SEBELP LIKE BSEG-EBELP,
BR_SZEKKN LIKE BSEG-ZEKKN.
working areas for the authority check "n435991
for the company code "n435991
*TYPES : BEGIN OF STYPE_BUKRS, "n435991
BUKRS LIKE T001-BUKRS, "n435991
WAERS LIKE T001-WAERS, "n435991
RETCODE TYPE N, "n435991
END OF STYPE_BUKRS. "n435991
"n435991
*DATA : G_S_BUKRS TYPE STYPE_BUKRS, "n435991
G_T_BUKRS TYPE STYPE_BUKRS OCCURS 0. "n435991
"n435991
for the document type "n435991
*TYPES : BEGIN OF STYPE_BLART, "n435991
BLART LIKE BKPF-BLART, "n435991
RETCODE TYPE N, "n435991
END OF STYPE_BLART. "n435991
"n435991
*DATA : G_S_BLART TYPE STYPE_BLART, "n435991
G_T_BLART TYPE STYPE_BLART OCCURS 0. "n435991
"n435991
for the business area "n435991
*TYPES : BEGIN OF STYPE_GSBER, "n435991
GSBER LIKE BSEG-GSBER, "n435991
RETCODE TYPE N, "n435991
END OF STYPE_GSBER. "n435991
"n435991
*DATA : G_S_GSBER TYPE STYPE_GSBER, "n435991
G_T_GSBER TYPE STYPE_GSBER OCCURS 0. "n435991
"n435991
for the purchasing organization "n435991
*TYPES : BEGIN OF STYPE_EKORG, "n435991
EKORG LIKE EKKO-EKORG, "n435991
RETCODE TYPE N, "n435991
END OF STYPE_EKORG. "n435991
"n435991
*DATA : G_S_EKORG TYPE STYPE_EKORG, "n435991
G_T_EKORG TYPE STYPE_EKORG OCCURS 0. "n435991
"n435991
for the plant "n435991
*TYPES : BEGIN OF STYPE_WERKS, "n435991
WERKS LIKE EKPO-WERKS, "n435991
RETCODE TYPE N, "n435991
END OF STYPE_WERKS. "n435991
"n435991
*DATA : G_S_WERKS TYPE STYPE_WERKS, "n435991
G_T_WERKS TYPE STYPE_WERKS OCCURS 0. "n435991
"n435991
*DATA : G_F_TABIX LIKE SY-TABIX. "n435991
"n435991
working tables for array database access "n934526
*types : begin of stype_key, "n934526
bukrs type bkpf-bukrs, "n934526
belnr type bkpf-belnr, "n934526
gjahr type bkpf-gjahr, "n934526
end of stype_key, "n934526
"n934526
stab_key type standard table of "n934526
stype_key "n934526
with default key. "n934526
Initialwerte setzen
FORM INIT.
ENDFORM.
Selection Screen: Process before output
FORM PBO.
ENDFORM.
Selection Screen: Process after input
FORM PAI USING FNAME MARK.
CHECK MARK = SPACE.
ENDFORM.
Lesen BKPF und Uebergabe an den Selektionsreport
FORM PUT_BKPF.
define locla working areas "n934526
data : l_t_key type stab_key, "n934526
l_t_key_block type stab_key, "n934526
l_t_bkpf type standard table of bkpf. "n934526
"n934526
----------------------------------------------------------"n934526
"n934526
database seletion improved "n934526
at first read all FI doc keys into a lean table "n934526
data: wa like bkpf-belnr.
SELECT * FROM BKPF
where budat in br_budat
AND GJAHR EQ BR_GJAHR-LOW
AND BLART = 'RV'.
AND BLART IN BR_BLAR "n934526
"n934526
check sy-subrc is initial. "n934526
"n934526
then process the found FI doc keys in small blocks "n934526
do. "n934526
if l_t_key[] is initial. "n934526
exit. " no more keys -> leave this DO loop "n934526
endif. "n934526
"n934526
form small blocks with 100 FI docs each "n934526
refresh l_t_key_block. "n934526
append lines of l_t_key from 1 to 100 "n934526
to l_t_key_block. "n934526
delete l_t_key from 1 to 100. "n934526
"n934526
read the complete FI doc headers for the block "n934526
SELECT * FROM BKPF "n934526
into corresponding fields of table l_t_bkpf "n934526
for all entries in l_t_key_block "n934526
WHERE BUKRS = l_t_key_block-BUKRS "n934526
AND BELNR = l_t_key_block-BELNR "n934526
AND GJAHR = l_t_key_block-GJAHR. "n934526
"n934526
provide the complete structure for the PUT "n934526
loop at l_t_bkpf into bkpf. "n934526
process this company code : authority and read T001 "n934526
PERFORM F1000_COMPANY_CODE. "n934526
"n934526
go on if the first authority check was successful "n934526
CHECK : G_S_BUKRS-RETCODE IS INITIAL. "n934526
"n934526
set the currency key and save the keys "n934526
MOVE : G_S_BUKRS-WAERS TO T001-WAERS, "n934526
BKPF-BUKRS TO BR_SBUKRS, "n934526
MOVE BKPF-BELNR TO BR_SBELNR.
MOVE BKPF-GJAHR TO BR_SGJAHR . "n934526
BKPF-GJAHR TO BR_SGJAHR. "n934526
PUT BKPF. "n934526
endloop. "n934526
enddo. "n934526
ENDSELECT.
ENDFORM.
Lesen BSEG und Uebergabe an den Selektionsreport
FORM PUT_BSEG.
define local working areas "n934526
data : l_t_bseg type standard table of bseg. "n934526
"n934526
----------------------------------------------------------"n934526
BR_SGSBER = BR_GSBER-LOW.
"n934526
SELECT * FROM BSEG "n934526
WHERE BELNR EQ BR_SBELNR
AND GJAHR EQ BR_SGJAHR
AND GSBER EQ BR_SGSBER.
check sy-subrc is initial. "n934526
"n934526
loop at l_t_bseg into bseg. "n934526
MOVE BSEG-BUZEI TO BR_SBUZEI.
MOVE BSEG-EBELN TO BR_SEBELN.
MOVE BSEG-EBELP TO BR_SEBELP.
MOVE BSEG-ZEKKN TO BR_SZEKKN.
PUT BSEG.
endSELECT. "n934526
ENDFORM.
"n435991
FORM AUTHORITYCHECK_BKPF "n435991
"n435991
"n435991
*FORM AUTHORITYCHECK_BKPF. "n435991
"n435991
the authority-check for the company code was successful; "n435991
check authority for the document type here "n435991
"n435991
does the buffer contain this document type ? "n435991
READ TABLE G_T_BLART INTO G_S_BLART "n435991
WITH KEY BLART = BKPF-BLART BINARY SEARCH. "n435991
"n435991
CASE SY-SUBRC. "n435991
WHEN 0. "document type is known "n435991
"n435991
WHEN 4. "docment type is new --> insert "n435991
MOVE SY-TABIX TO G_F_TABIX. "n435991
PERFORM F1200_CREATE_BLART_ENTRY. "n435991
INSERT G_S_BLART INTO G_T_BLART "n435991
INDEX G_F_TABIX. "n435991
"n435991
WHEN 8. "document type is new --> append "n435991
PERFORM F1200_CREATE_BLART_ENTRY. "n435991
APPEND G_S_BLART TO G_T_BLART. "n435991
ENDCASE. "n435991
"n435991
set the return code "n435991
MOVE G_S_BLART-RETCODE TO SY-SUBRC. "n435991
"n435991
*ENDFORM. "authoritycheck_bkpf "n435991
"n435991
"n435991
FORM AUTHORITYCHECK_BSEG "n435991
"n435991
"n435991
*FORM AUTHORITYCHECK_BSEG. "n435991
"n435991
does the buffer contain this document type ? "n435991
READ TABLE G_T_GSBER INTO G_S_GSBER "n435991
WITH KEY GSBER = BSEG-GSBER BINARY SEARCH. "n435991
"n435991
CASE SY-SUBRC. "n435991
WHEN 0. "business area is known "n435991
"n435991
WHEN 4. "business area is new --> insert "n435991
MOVE SY-TABIX TO G_F_TABIX. "n435991
PERFORM F1300_CREATE_GSBER_ENTRY. "n435991
INSERT G_S_GSBER INTO G_T_GSBER "n435991
INDEX G_F_TABIX. "n435991
"n435991
WHEN 8. "business area is new --> append "n435991
PERFORM F1300_CREATE_GSBER_ENTRY. "n435991
APPEND G_S_GSBER TO G_T_GSBER. "n435991
ENDCASE. "n435991
"n435991
set the return code "n435991
MOVE G_S_GSBER-RETCODE TO SY-SUBRC. "n435991
"n435991
*ENDFORM. "authoritycheck_bseg "n435991
"n435991ABAP provides few tools to analyse the perfomance of the objects, which was developed by us.
Run time analysis transaction SE30
This transaction gives all the analysis of an ABAP program with respect to the database and the non-database processing.
SQL Trace transaction ST05
by using this tool we can analyse the perfomance issues related to DATABASE calls.
Perfomance Techniques for improve the perfomance of the object.
1) ABAP/4 programs can take a very long time to execute, and can make other processes have to wait before executing. Here are some tips to speed up your programs and reduce the load your programs put on the system:
2) Use the GET RUN TIME command to help evaluate performance. It's hard to know whether that optimization technique REALLY helps unless you test it out.
3) Using this tool can help you know what is effective, under what kinds of conditions. The GET RUN TIME has problems under multiple CPUs, so you should use it to test small pieces of your program, rather than the whole program.
4) Generally, try to reduce I/O first, then memory, then CPU activity. I/O operations that read/write to hard disk are always the most expensive operations. Memory, if not controlled, may have to be written to swap space on the hard disk, which therefore increases your I/O read/writes to disk. CPU activity can be reduced by careful program design, and by using commands such as SUM (SQL) and COLLECT (ABAP/4).
5) Avoid 'SELECT *', especially in tables that have a lot of fields. Use SELECT A B C INTO instead, so that fields are only read if they are used. This can make a very big difference.
6) Field-groups can be useful for multi-level sorting and displaying. However, they write their data to the system's paging space, rather than to memory (internal tables use memory). For this reason, field-groups are only appropriate for processing large lists (e.g. over 50,000 records). If you have large lists, you should work with the systems administrator to decide the maximum amount of RAM your program should use, and from that, calculate how much space your lists will use. Then you can decide whether to write the data to memory or swap space.
Use as many table keys as possible in the WHERE part of your select statements.
7)Whenever possible, design the program to access a relatively constant number of records (for instance, if you only access the transactions for one month, then there probably will be a reasonable range, like 1200-1800, for the number of transactions inputted within that month). Then use a SELECT A B C INTO TABLE ITAB statement.
8) Get a good idea of how many records you will be accessing. Log into your productive system, and use SE80 -> Dictionary Objects (press Edit), enter the table name you want to see, and press Display. Go To Utilities -> Table Contents to query the table contents and see the number of records. This is extremely useful in optimizing a program's memory allocation.
9) Try to make the user interface such that the program gradually unfolds more information to the user, rather than giving a huge list of information all at once to the user.
10) Declare your internal tables using OCCURS NUM_RECS, where NUM_RECS is the number of records you expect to be accessing. If the number of records exceeds NUM_RECS, the data will be kept in swap space (not memory).
11) Use SELECT A B C INTO TABLE ITAB whenever possible. This will read all of the records into the itab in one operation, rather than repeated operations that result from a SELECT A B C INTO ITAB... ENDSELECT statement. Make sure that ITAB is declared with OCCURS NUM_RECS, where NUM_RECS is the number of records you expect to access.
12) If the number of records you are reading is constantly growing, you may be able to break it into chunks of relatively constant size. For instance, if you have to read all records from 1991 to present, you can break it into quarters, and read all records one quarter at a time. This will reduce I/O operations. Test extensively with GET RUN TIME when using this method.
13) Know how to use the 'collect' command. It can be very efficient.
14) Use the SELECT SINGLE command whenever possible.
15) Many tables contain totals fields (such as monthly expense totals). Use these avoid wasting resources by calculating a total that has already been calculated and stored.
Some tips:
1) Use joins where possible as redundant data is not fetched.
2) Use select single where ever possible.
3) Calling methods of a global class is faster than calling function modules.
4) Use constants instead of literals
5) Use WHILE instead of a DO-EXIT-ENDDO.
6) Unnecessary MOVEs should be avoided by using the explicit work area operations
see the follwing links for a brief insifght into performance tuning,
http://www.thespot4sap.com/Articles/SAPABAPPerformanceTuning_Introduction.asp
1. Debuggerhttp://help.sap.com/saphelp_47x200/helpdata/en/c6/617ca9e68c11d2b2ab080009b43351/content.htm
2. Run Time Analyser
http://help.sap.com/saphelp_47x200/helpdata/en/c6/617cafe68c11d2b2ab080009b43351/content.htm
3. SQL trace
http://help.sap.com/saphelp_47x200/helpdata/en/d1/801f7c454211d189710000e8322d00/content.htm
4. CATT - Computer Aided Testing Too
http://help.sap.com/saphelp_47x200/helpdata/en/b3/410b37233f7c6fe10000009b38f936/frameset.htm
5. Test Workbench
http://help.sap.com/saphelp_47x200/helpdata/en/a8/157235d0fa8742e10000009b38f889/frameset.htm
6. Coverage Analyser
http://help.sap.com/saphelp_47x200/helpdata/en/c7/af9a79061a11d4b3d4080009b43351/content.htm
7. Runtime Monitor
http://help.sap.com/saphelp_47x200/helpdata/en/b5/fa121cc15911d5993d00508b6b8b11/content.htm
8. Memory Inspector
http://help.sap.com/saphelp_47x200/helpdata/en/a2/e5fc84cc87964cb2c29f584152d74e/content.htm
9. ECATT - Extended Computer Aided testing tool.
http://help.sap.com/saphelp_47x200/helpdata/en/20/e81c3b84e65e7be10000000a11402f/frameset.htm
Performance tuning for Data Selection Statement
http://www.sap-img.com/abap/performance-tuning-for-data-selection-statement.htm
Maybe you are looking for
-
Opening a .html in workbench gives 'Null' error message
Hi, I am using MII 12.1.9 Build(108). When I double on a .html object, it gives a 'Null' error message and doesn't open the file. Then if I am right click on that file and click on 'Open' it opens up. Is there something wrong? Regards, Chanti.
-
How do I clear permissions for SCC VIs? I am trying to modify the source code.
I'm trying to use SCC protected VIs in a new project, but original permission has been lost. I'm using Labview 7.0 that does not have the SCC option.
-
I have a macbook pro, with the DVI output on the side. I was wondering: 1) is there any kind of cord that would go to RCA video (JUST yellow, I don't have composite inputs) 2) is there a cord that'll work for the MBP like there is for ipod's that wil
-
I want to update the Custom table using the data available in ITAB.
Hi, I want to updaste the Custom Table which is created by me (Ztable) using the data available in itab.(which i got from defferent standard tables) I want to update the custom table using the itab data How is it possible? Is any possible by using Mo
-
Can anyone tell me, or tell me where to find information about the function dbms_utility.get_hash_value? I've searched otn and have only found example uses, in conjunction with security programs. What I'd like to know is how the second and third para