How to use the grow/shrink effect from the gallery
I'm not interested in the entire gallery, however, the
grow/shrink effect is very nice.
I tried looking for it in dreamweaver....
and then I tried grabbing gallery.js and spryeffects.js
I get errors.....Has anyone extracted this particular
behavior? There are a number of places it can be useful.
Thanks,
Oh, I think I have found something ot there, sorry if I was a little impatient...
"3d fog only works with 2 different 3d image types and does not work with a AE 3d scene."
And one of that 3d images is "RPF" or something like that, a file that contains some 3D or depth info as far as I can imagine... So... really there is no effect like this to simulate fog quickly & easily into a simple 3D After Effects composition? Cause it'd be very usefull... of course I can imagine several ways to "fake" it, but a simple effect for each 3D layer it'd be great to avoid complications... Well, anyway any imput or advice it'll be very welcomed, CHEERS!
Similar Messages
-
How to use the stabilizer effect on Adobe premiere elements 11
Can anyone show me how to use the video stabilizer effect on premiere elements 11 step by step ?
Thank you !achiu8888
I suspect that the principles would lend themselves to a step by step but how the effect works with your specific video will depend upon the degree of shakiness and other factors.
1. Your video clip on the Timeline of a project with the project settings which match the properties of your source video (part of all works whether or not the Stabilizer is involved.
2. Go to fx Effects Tab at the bottom of the Expert View, navigate to the Video Stabilizer and click on it to view its thumbnail. Drag the effect's thumbnail from there into the video clip on the Timeline.
3 I ran into an online excerpt of the Video Stabilizer in Adobe's Classroom in a Book, you may want to follow the path from there.
http://books.google.com/books?id=7zdjWNElM1IC&pg=PT252&lpg=PT252&dq=premiere+elements+stab ilizer&source=bl&ots=YM4HHrmZAl&sig=MpFt6GJn7IkgESWBZ6sC6wA7aEM&hl=en&sa=X&ei=ZZ2zUbbVI5W3 4APDq4D4DQ&sqi=2&ved=0CHoQ6AEwBw
Also, you might want to put that information together with Adobe Effects Reference's description of the options iin the Applied Effects Palette/Stabilizer Panel.
http://help.adobe.com/en_US/premiereelements/using/WS4B8135DA-083C-42eb-B09E-65070ECBC889. html#WSeffff8bffc802084cc1873012fdd6069b3-8000
(Scroll down until you get to Video Stabilizer options description.)
The above should supply with good starter information. If you need clarification on anything that I have written, please do not hesitate to ask.
Thanks.
ATR -
how can I copy an audio effect from a clip and paste it to another clip in the same timiline...With FCPro 7 it was all so fast........
Tom Wolsky wrote:
The advantage goes to FCP7 if you allow that it can copy and paste filters, audio and video, transformations, and other attributes separately.
You can do that in FCPX too, as all the things you cited are listed separately in the inspector.
Here's a little gotcha. Let's say you've color corrected a few clips and you've applied an effect to one and want to paste it the other clips. You switch off color correction and copy the clip. You select the other clips and paste effects. What do you think happens? The effect is applied, but the color correction is applied as well, only it's switched off as it was in the first clip, so all the color correction on the other clips is lost. Fun, eh?
I'll try to replicate your gotcha - but no, that doesn't sound like fun at all! -
I am currently away from my MAC and want to send an email through apple mail with the bcc functionality. I am using the cloud to get to my mail, however, I can't figure out how to use the BCC functionality, please help. Thanks!
Open your mail,
lower left corner click on settings,
go to composing and check BCC, save and your done -
How to use the set functions effectively in webi ,please let me know with detail
how to use the set functions effectively in webi ,please let me know with detail
Hi,
we use use set functions on heirarchies with aggregate functions mostly .
If you include member_set, Min returns the minimum value of the aggregated data for all members in the member set.
Member_set can include multiple sets separated by semicolons (;).
The list of member sets must be enclosed in {}.
If the member set expression does not specify a precise member or node, the hierarchy referenced must be present in the table, then the member set expression references the current member in the hierarchy in the table. If the hierarchy is not in the table, the function returns the message #MULTIVALUE.
Eg .
1) Ancestor
=Sum([YTD] ; {Ancestor([Test Hierarchy];2)})
2) IsLeaf
=[Test Hierarchy].IsLeaf
You can use this function when you want to show your Measure only at lower level .
3) .Depth
=[Test Hierarchy].Depth
This is also function used with hierarchy to find Level of Members .
Follow this link for PDF reference .
Page 147
https://www.google.co.in/url?sa=t&rct=j&q=&esrc=s&source=web&cd=2&cad=rja&ved=0CDIQFjAB&url=https%3A%2F%2Fhelp.sap.com%2Fbusinessobject%2Fproduct_guides%2Fboexir4%2Fen%2Fxi4sp5_ffc_en.pdf&ei=nBAUU-iUM4WWrAeMuoCoDg&usg=AFQjCNHakXsEjd_yUk2y3lVdibf3PXpEOA&bvm=bv.61965928,d.bmk
search on SCN this question was discussed before also one those links .
http://scn.sap.com/thread/3183380
Hope this will help you . -
How to use the DLLs which created from c++ in Java?
And How to use the DLLs which created from JNI in C++?
Huh?
Are you asking how to do JNI - you should read the tutorial.
Are you asking how to load it - then use System.loadLibrary()
Are you asking what to do with the output from javah - put it in a C file and write some code, compile it into a dll. -
How to use the repository; uploading reports from DEV to PROD...
Hello...
I'm fairly new to CR-XIr2 (SP3) but have worked with Crystal Reports since v6.0. I'm trying to figure out how to create a dynamic parameter list that someone can select an item from, which will get sent as an input parameter to the SQL Server 2005 stored proc that populates the report. I'm also trying to figure out if there's an easy way to copy reports from a DEV environment into PROD. We have BOE.
Basically, I would like to find out resources online or in books on how to use the BOE repository for dynamic and/or cascading parameters (i.e. pulling a list of text values & their associated IDs from a lookup table that won't be used in the report), images (i.e. corporate logo), etc.. What complicates things for us is that IT is now requiring us to use a DEV environmentit was really easy when we had unlimited access in PROD! We also need to put together a process where reports & other repository objects that are copied from DEV to PROD access the correct db, etc. (Crystal Report in DEV accesses DEV db/repository/etc.when copied to PROD it accesses PROD db/repository/etc.)
Anyway, I'm just looking for info on where to begin--whether it be a book, a BO/SAP knowledge base article, in-class training from a specific company, etc. Thanks!Hey Markian,
Can you let me know the process you have followed to migrate from Dev to Prod.
We can migrate all the reports and objects and database fields through migrate wizard where you can import all the objects, reports and database fields and users to production enterprise.
Just follow the above scenario and let us know if you are facing any error.
Try publish the reports using import wizard and run it in the crystal designer.
Regards,
Naveen. -
How to use the result from a taglib?
Hi people.
I've been looking arround for some feedback on how to use the output generated by a taglib on jsp code but I haven't been able to find any.
Could somebody tell me how to do that please?It works something like this:
The tab library consists of a class library and a tag libraray descriptor file. In your jsp header you include a taglib directive which associated athe TLD with a particular name prefix. Then you can include XML tags with that prefix and the tag library class to which they are connected will be invoked from the servlet that is generated from the JSP. This tag code can do pretty much anything, but usually what it mostly does is write HTML to the response stream. Opening tags and closing tags can both add whatever text they like to the stream which is sent to the client.
So including the tag in you JSP will usually suffice to cause generated output, it's up to the taglib. -
How to use the iphone 5 s connect the computer?I want copy photo from computer.
how to use the iphone 5 s connect the computer?I want copy photo from computer.Who can teach me~thank^^
You can move a photo from the computer to the phone using any of the following:
iTunes sync: http://support.apple.com/kb/HT4236
Photo Stream: http://support.apple.com/kb/HT4486
3rd party apps such as: http://www.photosync-app.com -
Grow/Shrink Effects behavior in DW 5.5
I am working on a page at http://www.tyneships.co.uk/phones/keys.php. Click on any letter on the page, and then on any of the links on the left hand side of the page that it takes you to.(all temporary code).
This takes you to a page which loads a picture and shrinks it down to a size. When you click on the picture, it expands to fill the page. Click on it again, and it shrinks back again.
I did this using the DW5.5 grow/shrink effect, to be found under Window/Behaviors/+/Effects/Grow/Shrink.
The code is here:
<img src="../photos/<?php echo $row_showshipset['thumblink']; ?>" width="800" height="600" title="Click to Zoom or Shrink" onClick="MM_effectGrowShrink(this, 1000, '100%', '300%', true, false, false)" onload="MM_effectGrowShrink(this, 0, '100%', '40%', false, false, false)">
On load, it is set to shrink the image down from 100% to 40% of its size in 0 miliseconds. When clicked on, it grows to , and then when it is clicked on, it grows from 100% to 300% to fit its preset 800 x 600.
This would be great, except for the fact that as the picture loads, it first of all fills the screen before the javascript routine shrinks it into its table.
The same happens if you click the next button under the photo while it is expanded.
There used to be a behaviour called "Pre-Load Images" that I thought may fix this problem, but it is no longer ioncluded in the DW package.(or at least I cannot find it)
Is there any way to obscure the image until it has loaded and shrunk down to its smaller size?
Howard WalkerYou need to upload the script file to the server:
<script src="SpryAssets/SpryEffects.js" type="text/javascript"></script>
That is in your code but not on the server.
J -
SQL QUERRy (how to use the SQVI)
Hi all,
can anyone explain the process and how to use the Tcode SQVI.....
thanks in advance
srinivas...thanks for imm responce....
as per ur mail ...
If a report got created through SQVI Transaction it will not allows you to transport..
the same senario will effect to the Tcodes SQ01,SQ02,SQ03.....
could you please look into below my question also..can any one please responce to this,,,,
The below link will explain to genereate the normal or ALV report using ABAP query without any programming language.i have few questions......
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40bec8da-4cd8-2910-27a9-81f5ce10676c
1.here in this link pdf doc explained how to get the data in two tables usuing ABAP quesry,,,
is it possible for getting the data from more than two tables and how ,canone please guide me....
2.using ABAP query i got the ALV single grid report ,is it possible to get more than single grid usuingABAP query ....?
3.using ABAP query i got the ALV single grid report then how to give the print and how copy and paste in the edit pad....
note : the above PDF link step by step is helpfull for generating report using Tcodes like SQ01,SQ02,SQ03.
can anyone provide the similar type pdf documents for generating report using Tcode SQVI...?
thanks in advance
Srinivas........... -
How to get "Layer Mask Hides Effects" from Photoshop Plug-in
How to get "Layer Mask Hides Effects" from Photoshop Plug-in.
I don't think there's enough information here to give an answer. Is this a Plug-in that you're writing or intend to write? If so, what type of Plug-in is it?
If you are writing your own plug-in, the header files included in the Photoshop SDK/API have a bunch of defines for the proper codes to use.
PITerminology.h has a large amount of keys that can be used to query for information. PIUGetInfo is probably the function that you want to call to determine what you need to know.
If you're looking for information about a specific layer, you will want to make a new PIActionDescriptor, call sPSActionDescriptor->Make(*PIActionDescriptor), and then call GetLayerInfo on the layer that you're querying information about.
You can then call sPSActionDescriptor->Get<datatype> on the layer while passing in the key of the data that you want. -
Okay so I set up my Time Capsule already and is now backing up 2 of my iMacs. Works great. What I want to know is how to use the TC to directly store files? I want to do this to delete some files on iMac 20inch but still have them on the TC for future reference..eg some movies on iTunes. I want to directly save them on the drive so I can delete them from iTunes and gain some storage. (Ps on iMac 20 inch (it's almost full - 320 GB) when I enter time machine, a tab comes up on finder which reads "Time Machine backups" it's able to be ejected like a disc or a connected device. On the iMac 20 inch, I dragged some files onto there as if using it like a hard drive. Is this the correct method? Then I went to my 27inch iMac and saw the "Time Machine Backups" hoping to see the files I dragged from the 20inch iMac. But the files were not there except a folder that said "Backups.backupdb". Can someone help me?
It's not a good idea to use a network disk for both Time Machine backups and other things. By design Time Machine will eventually consume all the space on its output disk, which will then cause problem for your other files. I'd store those other files on an external disk connected to the Time Capsule. The problem with that is that Time Machine will only back up files that are local to your Mac. That means that you'll only have one copy of the files on or attached to your Time Capsule.
By the way, you've been misled by poor field labeling on this forum into typing a large part of your message into the field intended for the subject. In the future just type a short summary of your post into that field and type the whole message into the field below that. -
JNI - How to use the error reporting mechanism?
I've developed a C++ DLL which is loaded from a commercial Win32 application (not written by me) as a plug-in for external calculations. On its initialization the C++ DLL launches the Java VM via the JNI invocation interface. When the DLL functions are called by the application, they forward the calls to Java objects inside the Java VM, again via JNI invocation interface.
This works well, but I have encountered a weird error.
From Java I open a JFrame containing a JTextArea as small console for debug output messages. If I turn output to this debug console off (my printToConsole routine checks whether a boolean flag is set), the string concatenation operator may lead to a crash of the Java VM.
For example, if in one of the Java functions called from the
DLL via JNI invocation interface the following is the first statement,
it leads to a crash of the Java VM and the application that loaded the C++ proxy DLL.
String test=""+Math.random(); // String test not used later
Interestingly, if I comment this statement out, the Java code works fine WITHOUT any crash. I've already thought about potential races and synchronization issues in my code, but I don't see where this is the case. And the string concatenation error fails as well, if I insert sleep() statements in front of it and at other places in the code. However, if I turn on log messages printed to my JFrame debug console (containing a JTextArea), the String concatenation works without problems.
So maybe the JNI interface has a bug and affects the Java VM; I don't see where my JNI code is wrong.
One problem is that I do not get any stdout output, as the C++ proxy DLL is loaded by the Windows application, even if I start the Windows application from the DOS command line (under Windows).
Does anyone know how to use the error reporting mechanism?
http://java.sun.com/j2se/1.4.2/docs/guide/vm/error-handling.html
Is it possible that the JVM, when it crashes, writes debug information about the crash into a file instead of stdout/stderr?
My C++ proxy DLL was compiled in debug mode, but the commercial application (which loaded the DLL) is very likely not.
I do not know hot to find the reason why the String concatenation fails inside the Java function called from the C++ DLL via JNI.Yes, I've initially thought about errors in the C++ code too. But the C++ code is actually very simple and short. It doesn't allocate anything on the C++ side. It allocates a couple of ByteBuffers inside the Java VM however via JNI invocation interface calls of env->NewDirectByteBuffer(). The native memory regions accessed via the ByteBuffers are allocated not by my own C++ code, but by the program that calls my DLL (the program is Metastock).
The interesting thing is that everything works fine if output to my debug console is enabled, which means that in the Java print routine getConsoleLoggingState() returns true and text is appended to the jTextArea.
static synchronized void print(String str)
{ MetaStockMonitor mMon=getInstance();
if ( mMon.getFileLoggingState() && mMon.logFileWriter!=null) {
mMon.logFileWriter.print(str);
mMon.logFileWriter.flush();
if ( mMon.getConsoleLoggingState() ) {
mMon.jTextArea1.append(str);
Only if output to the JTextArea is turned off (ie. getConsoleLoggingState()==false), the crash happens when the FIRST statement in the Java routine called via JNI invocation interface is a (useless) String concatenation operation, as described above.
String test=""+Math.random(); // String test not used later
Moreover, the crash happens BEFORE the allocated ByteBuffer objects are accessed in the Java code. But again, if console output is turned on, it works stable. If console output is turned off, it works when the (useless) String concatenation operation is removed in the Java routine called from C++.
I've already thought about potential races (regarding multiple threads), but this can be ruled out in my case. It almost appears as if the JVM can have problems when called by the invocation interface (I tested it with Java 1.4.2 b28).
All the calls between C++ and Java go ALWAYS in the direction from C++ code to Java. Unfortunately, there is no special JRE version with extensive logging capabilities to facilitate debugging. And the problem is not easily reproducible either.
JNIEnv* JNI_GetEnv()
JNIEnv *env;
cached_jvm->AttachCurrentThread((void**)&env,NULL);
fprintf(logfile,"env=%i\n",env);
fflush(logfile);
return env;
// function called by Metastock's MSX plug-in interface
BOOL __stdcall createIndEngine (const MSXDataRec *a_psDataRec,
const MSXDataInfoRecArgsArray *a_psDataInfoArgs,
const MSXNumericArgsArray *a_psNumericArgs,
const MSXStringArgsArray *a_psStringArgs,
const MSXCustomArgsArray *a_psCustomArgs,
MSXResultRec *a_psResultRec)
a_psResultRec->psResultArray->iFirstValid=0;
a_psResultRec->psResultArray->iLastValid=-1;
jthrowable ex;
jmethodID mid;
JNIEnv* env=JNI_GetEnv();
jobject chart=getChart(env, a_psDataRec);
if ( chart==NULL) {
return MSX_ERROR;
jobject getChart (JNIEnv* env, const MSXDataRec *a_psDataRec)
jthrowable ex;
jmethodID mid;
int closeFirstValid, closeLastValid;
closeFirstValid=a_psDataRec->sClose.iFirstValid;
closeLastValid=a_psDataRec->sClose.iLastValid;
long firstDate, firstTime;
if (closeFirstValid>=1 && closeFirstValid<=closeLastValid) {
firstDate = a_psDataRec->psDate[closeFirstValid].lDate;
firstTime = a_psDataRec->psDate[closeFirstValid].lTime;
} else {
firstDate=0;
firstTime=0;
jclass chartFactoryClass = env->FindClass("wschwendt/metastock/msx/ChartFactory");
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot find class ChartFactory\n");
printSBufViaJava(sbuf);
return NULL;
mid = env->GetStaticMethodID(chartFactoryClass, "getInstance", "()Lwschwendt/metastock/msx/ChartFactory;");
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot find method ID for ChartFactory.getInstance()\n");
printSBufViaJava(sbuf);
return NULL;
jobject chartFactory=env->CallStaticObjectMethod(chartFactoryClass, mid);
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Exception while calling ChartFactory.getInstance()");
printSBufViaJava(sbuf);
return NULL;
mid = env->GetMethodID(chartFactoryClass, "getChartID", "(Ljava/nio/ByteBuffer;Ljava/nio/ByteBuffer;Ljava/nio/ByteBuffer;Ljava/nio/ByteBuffer;IIIIIII)F");
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot find method ID for ChartFactory.getChartID()\n");
printSBufViaJava(sbuf);
return NULL;
jobject symbolBuf=env->NewDirectByteBuffer(a_psDataRec->pszSymbol, strlen(a_psDataRec->pszSymbol) );
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot allocate symbolBuf\n");
printSBufViaJava(sbuf);
return NULL;
jobject securityNameBuf=env->NewDirectByteBuffer(a_psDataRec->pszSecurityName, strlen(a_psDataRec->pszSecurityName) );
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot allocate securityNameBuf\n");
printSBufViaJava(sbuf);
return NULL;
jobject securityPathBuf=env->NewDirectByteBuffer(a_psDataRec->pszSecurityPath, strlen(a_psDataRec->pszSecurityPath) );
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot allocate securityPathBuf\n");
printSBufViaJava(sbuf);
return NULL;
jobject securityOnlineSourceBuf=env->NewDirectByteBuffer(a_psDataRec->pszOnlineSource, strlen(a_psDataRec->pszOnlineSource) );
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot allocate onlineSourceBuf\n");
printSBufViaJava(sbuf);
return NULL;
// Java Function call leads to crash, if console output is turned off and
// the first statement in the Java routine is a (useless) string concatenation.
// Otherwise it works stable.
jfloat chartID=env->CallFloatMethod(chartFactory, mid, securityNameBuf, symbolBuf,
securityPathBuf, securityOnlineSourceBuf, (jint)(a_psDataRec->iPeriod),
(jint)(a_psDataRec->iInterval), (jint)(a_psDataRec->iStartTime),
(jint)(a_psDataRec->iEndTime), (jint)(a_psDataRec->iSymbolType),
(jint)firstDate, (jint)firstTime );
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Exception while calling ChartFactory.getChartID()");
printSBufViaJava(sbuf);
return NULL; -
How to Use the same iview for both KM End User and the KM Administrator
Hi friends,
*This is my scenario :* How to Use the same iview for both KM End User and the KM Administrator but with different Context
Menu Options.
i followed these steps but im getting same context menu for both KM End User and the KM Administrator .
Assign the role Content Administrator to the user km_admin. This is needed so that km_admin can change
the presentation settings for the KM Folder u201EReports_kmFolder‟.
Now, login with user km_admin. Navigate to the Km Folder reports_kmFolder through Content Administration
-> Km Content. Click on Details link of the folder reports_kmFolder.
Go To Settings -> Presentation. Click on the tab u201ESettings for You‟-> Click on button u201ESelect Profile‟.
Select the radio button corresponding to u201Elayout Set‟, and choose u201EConsumerExplorer‟ from the dropdown.
Click u201EOK‟.
Select both the check boxes corresponding to Items Affected as shown above, and click u201ESave‟
Now, remove the u201ESuper Administrator‟ role from the user km_admin and login with this user.
How rto resolve this????
Regards,
Prasad.Hello Prasad,
Most likely the user km_admin still has system principal roles assigned, even though you removed the Super Admin role, you should check that this user doesn't have any other admin roles, otherwise it will be considered a System Principal user and will therefore still have access to all content. For more information see http://help.sap.com/saphelp_nw70/helpdata/en/19/56f28fbd4e11d5993b00508b6b8b11/frameset.htm
Try creating a new user with just read access to the content and you should see that it will not be able to make any changes etc.
Regards,
Lorcan.
Maybe you are looking for
-
How to provide internet access for a site collection in SharePoint Foundation 2010
Hi all, I am working on SharePoint Foundation 2010. I have to make a site collection available on internet. Only one site collection is to be brought on internet rest of the site collections should not be accessible from outside. How do I achieve thi
-
I have 4 devices ... currently 3 of the are all attached to my personal itunes/email account. Just got another device - ipod touch 5 - that is my son's and I want for him to have his own account so that we are no longer sharing text messages, contac
-
I can't open excel or word file. it says excel quit unexpectedly.
i can't open microsoft excel of word suddenly. message keeps coming that microsoft quit unexpectedly. pls help
-
Trying to export hd in letter box
I'm baffled. Using finalcut express - trying to export hd project with letter box. The only way I can get it to work is to drag a single shot into the timeline. It then asks me to render and when I export with quicktime conversion it comes out letter
-
I can not open itunes any longer -I am getting this error message: I had successfully completed the latest update sometime last week. Then had a bunch of unrelated problems in Vista. I did a system restore today from a restore point two weeks ago. Ev