How to use the iviews to connect the backend R3 system?

is there any guide or help?
thanks a lot!
br

Hi,
YOu can reach ur r/3 system through iviews from enterprise portal by establishing a system connection .
To create such a system
refer to
check out the following link for your requirement
Create SAP Transaction iView using SAPGUI for Windows
Once ur system is ready you can make transaction iviews and thus get on to ur r/3 system.
Hope this helps,
Regards,
Uma.
Do get back for further clarifications!!!!!!! and Assign points for helpful answers on SDN:-)

Similar Messages

How to Use the same iview for both KM End User and the KM Administrator

Hi friends,
*This is my scenario :* How to Use the same iview for both KM End User and the KM Administrator but with different Context
Menu Options.
i followed these steps but im getting same context menu for both KM End User and the KM Administrator .
Assign the role Content Administrator to the user km_admin. This is needed so that km_admin can change
the presentation settings for the KM Folder u201EReports_kmFolder‟.
Now, login with user km_admin. Navigate to the Km Folder reports_kmFolder through Content Administration
-> Km Content. Click on Details link of the folder reports_kmFolder.
Go To Settings -> Presentation. Click on the tab u201ESettings for You‟-> Click on button u201ESelect Profile‟.
Select the radio button corresponding to u201Elayout Set‟, and choose u201EConsumerExplorer‟ from the dropdown.
Click u201EOK‟.
Select both the check boxes corresponding to Items Affected as shown above, and click u201ESave‟
Now, remove the u201ESuper Administrator‟ role from the user km_admin and login with this user.
How rto resolve this????
Regards,
Prasad.

Hello Prasad,
Most likely the user km_admin still has system principal roles assigned, even though you removed the Super Admin role, you should check that this user doesn't have any other admin roles, otherwise it will be considered a System Principal user and will therefore still have access to all content. For more information see http://help.sap.com/saphelp_nw70/helpdata/en/19/56f28fbd4e11d5993b00508b6b8b11/frameset.htm
Try creating a new user with just read access to the content and you should see that it will not be able to make any changes etc.
Regards,
Lorcan.

How to use the iphone 5 s connect the computer?I want copy photo from computer.

how to use the iphone 5 s connect the computer?I want copy photo from computer.Who can teach me~thank^^

You can move a photo from the computer to the phone using any of the following:
iTunes sync: http://support.apple.com/kb/HT4236
Photo Stream: http://support.apple.com/kb/HT4486
3rd party apps such as: http://www.photosync-app.com

How to used the internet connection adsl on my com...

how to used the internet connection adsl on my computer by nokia n73 me
i whant used the adsl connection in nokia n73 me by Bluetooth or cable
and thank you

Hi Theo,
There are several ways to implement this using simple timing features of LabVIEW. Two fairly simple methods are comparing system time stamps or using the Wait VI provided in the Timing palette. The time stamp comparison requires a little bit more programming, but can be included in your main program loop. To use the Wait function, you will probably need to construct a new loop parallel to your main loop. I have attached screenshots of these two implementations. Please let me know if you have any more questions.
Donovan
Attachments:
WaitDelay[1].Png ‏5 KB
TimeStampFalse.Png ‏11 KB
TimeStampTrue.Png ‏11 KB

Okay so I set up my Time Capsule already and is now backing up 2 of my iMacs. Works great. What I want to know is how to use the TC to directly store files? I want to do this to delete some files but still have them on the TC for future reference..

Okay so I set up my Time Capsule already and is now backing up 2 of my iMacs. Works great. What I want to know is how to use the TC to directly store files? I want to do this to delete some files on iMac 20inch but still have them on the TC for future reference..eg some movies on iTunes. I want to directly save them on the drive so I can delete them from iTunes and gain some storage. (Ps on iMac 20 inch (it's almost full - 320 GB) when I enter time machine, a tab comes up on finder which reads "Time Machine backups" it's able to be ejected like a disc or a connected device. On the iMac 20 inch, I dragged some files onto there as if using it like a hard drive. Is this the correct method? Then I went to my 27inch iMac and saw the "Time Machine Backups" hoping to see the files I dragged from the 20inch iMac. But the files were not there except a folder that said "Backups.backupdb". Can someone help me?

It's not a good idea to use a network disk for both Time Machine backups and other things. By design Time Machine will eventually consume all the space on its output disk, which will then cause problem for your other files. I'd store those other files on an external disk connected to the Time Capsule. The problem with that is that Time Machine will only back up files that are local to your Mac. That means that you'll only have one copy of the files on or attached to your Time Capsule.
By the way, you've been misled by poor field labeling on this forum into typing a large part of your message into the field intended for the subject. In the future just type a short summary of your post into that field and type the whole message into the field below that.

How to Use the language function for assignment and validation

Hi All,
If anyone can explain me in details with example ,how to use the language function for assignments and validations?
Thanks
Arnab

Hi Arnab,
The expression is checked only for the current MDM session.
If u login with the ABC language it will always show the ABC language no matter how many times u execute it.
Try connecting to the DM with the XYZ language.
It should go to the if part rather than else.
Hope it helps.
Thanks,
Minaz

How to use the Google Android Emulator in Flash Builder on Windows 7?

I want to try out Flash Builder to create an app, but I cannot find out how to use the Google Android Emulator in Flash Builder. The simulators in Flash Builder work, and the android emulator is installed correctly and can run. I just can't seem to connect them. How do I do that?

Hi Pahup,
Thank you for your reply!!
I adapted an Android App using Flash CC on a Mac. I already published this App for the Apple App Store. When I published the App for Android I chose Air 3.7.xxx for Android. I also created the p12 certificate using Flash CC in the publishing settigns for Android. So my App is theoretically finished and ready for Upload.
When I went to the Google Play Store Developer Console I had the options to
1.) Upload APK
or
2.) Prepare Store Entry
...so I prepared the Store entry first. When I go to "APK"-Tab in the console it looks like this:
... it says "Upload APK" and the Button below "Get Licence Key". When I click on the license Key Button it looks like this:
So I think I should enter this RSA-Key somehow into my App BEFORE uploading it to the Google Play Store. This is recommended when an Ap is set to be paid. My Application is set to paid.
I did not use any kind of licensing API (until now - cause I don´t know how and what it is for)
This is all new to me. It is the first App I want to bringt to the Android market. I really hoped it would be as easy as getting an app into the Apple App Store. I found so many step by step instructions for dummies on "How to get an Flash iOS App into the App Store plus creating all the certificates needed", so I thought it would be the same for Android. But there is no help at all at the moment. I am totally confused.
So any help, hint or instrusction would be great!!
By the way - this is the App I want to get into the Google Play Store

How to use the Bluetooth module natively in Parallels Desktop

link to the instructions on how to enable bluetooth natively in parallels:
http://www.mattiouz.com/blog/2007/04/13/how-to-use-the-built-in-mac-bluetooth-in -windows-under-parallels/
link to the .exe that installs the apple driver for the bluetooth module needed in parallels: http://www.mattiouz.com/download/AppleBluetoothInstaller.exe
now my bluetooth is accessible under parallels 3.0.5158. i scanned with a bluetooth netowrk scanner and i had no problems connecting to my treo 650.
i took my some time to find the info but @ last i found it;-)
Message was edited by: smokeonit

Hi,
You canr use text modules in script. You have to use standard texts .
Standard text are maintained in SO10 transaction.
you can create translation text for other languages also . So based on logon language it will print translation text.
go to SO10
give textname it say Ztextname id as ST and language as EN
say create, then you will get editor there maintain your text and save it . then come back . Now change language (say for german DE) say create and eneter translation text and save it.
so now you have created a text called ztextname which you can use in your script.
Inorder to insert the texts in your script do as below
go to any window editor and select path
Insert->texts->symbols->standard symbols
then you will get popup in which you have to mention all the parameters that you have created earlier.
after inserting just change language EN to sy-langu
Reward points if useful
About text elements Sravan already given some informatiomn
Regards,
Nageswar

How to use the BAPI_VENDOR_CREATE

Hi Experts,
Could anyone explain me, how to use the BAPI, 'BAPI_VENDOR_CREATE' !
Our requirement is to create vendors from the third party system say like 'BIZTALK' . Those people will be connecting to our SAP server through a custom RFC, which I have to create and in that RFC, I have to call this BAPI. since the BAPI, 'BAPI_VENDOR_CREATE' doesn't have any import parameters, I am unable to pass the Vendor numbers and other fields say like, 'COMPANY CODE, ACCOUNT GROUP, STREET etc.., ' , which are also needed by the time of creating vendors.
Can anyone help me out, how to solve this issue!!! Or else is there any otherway of approaching this problem, also please let me know...
Thanks in advance.
SOMU.

You have to pass Header and GM code as the INput parameters for uing this BAPI....GM code would be structure.
Also you have to pass the INternal table Item for the goods mvt cxreate which will contains
      BATCH.
      MOVE_TYPE.
      ENTRY_QNT.
      MOVE_PLANT.
      MOVE_STLOC.
      MOVE_BATCH.
      MOVE_REAS
these parameters.
Regards,
Sushil.

How to use the out parameter of a transformation

Hi All,
I have a requirement where I need to move all the transformations from process flows to map.SO for each transformation I need to have 1 map which calls this transformation.I have 1 transformation which has both input and output parameter.If I use this transformation in mapping then how to use the out parameter of thsi transformation.This out parameter needs to beused in other mappings.Can soemone please help me.
Thansk in advance

Hi,
I'm not quite sure what you are trying to do.
What works: Connect the outgroup of a pre- or post-mapping process operator to the mapping output parameter operator..
What does not work: Connect the outgroup of an operator that can return more than one row (e.g. table operator, filter, joiner ,...) to the mapping output parameter operator. The mapping output parameter just returns "one row", like a pl/sql function call.
You cannot pass a "data stream" from one mapping to another. Maybe the pluggable mappings is what you are looking for.
Regards,
Carsten.

How to use the admin user account in reports and dashboards?

Hi Everyone,
I want to use the admin user account in report and dashboard connections. But the Hyperion is automatically using the current user's credentials to fetch data.
Hyperion 11.1.1.1
Thanks
Syantan

This has been posted in the essbase forum > How to use the admin user account in reports and dashboards?
Cheers
John
http://john-goodwin.blogspot.com/

How to use the camera kit

Hi does anyone knows how to use the canera kit ? What are the other software that need to download? Thx

Hi,
You don't need any software to use it. If you connect your camera through the camera connection kit to the iPad (either by USB or just the SD card), the app Photos will open and you will see the multimedia content on your camera and have the opportunity to select what you want to import on your iPad.

How to use the built in TV tuner in a GX 600???

Hi to everyone.
I would like to know how to use the built in tv tuner card in my gx 600.. I tried but it didnt detect any signal for tv..I wondering if I am doing something wrong. Your knowledge will be greatly appreciated.Thanks.
GX600 owner.

I am in Asia particularly in the Philippines Sir.
Yes I do see it in device manager labeled DVBT hybrid TV device. I think thats the tuner card right?
The program I am running to configure it is Windows Media Center, I am using a windows 7 OS..I connected the portable antenna and tried also a tv antenna but when it scans for signals it tells me it cant see any signal or channel at all.I am in a place where TV's connect to a channel even though your just using an aluminum tube..so signal is really good so I cant seem to figure out why it cant detect any..T_T.Thanks for your response sir..greatly appreciated.

How to use the default database service name on creating procedure for data

how to use the default database service name on creating procedure for datagaurd client failover ??? all oracle doc says create a new service as below and enable at DB startup. but our client is using/wanted database default service to connect from application on the datagaurd environment (rac to non rac setup).please help.
Db name is = prod.
exec DBMS_SERVICE.CREATE_SERVICE (service_name => 'prod',network_name =>'prod',failover_method => 'BASIC',failover_type => 'SELECT',failover_retries => 180,failover_delay => 1);
says already the service available.
CREATE OR REPLACE TRIGGER manage_dgservice after startup on database DECLARE role
VARCHAR(30);BEGIN SELECT DATABASE_ROLE INTO role FROM V$DATABASE;
IF role = 'NO' THEN DBMS_SERVICE.START_SERVICE('prod');
END IF;
END;
says trigger created, but during a swithover still the service is listeneing on listener.
tns entry.
prod =
(DESCRIPTION =
(ADDRESS_LIST =
(LOAD_BALANCE = YES)
(ADDRESS = (PROTOCOL = TCP)(HOST = prod1)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = prod2)(PORT = 1521)) ---> primary db entry
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = proddr)(PORT = 1521)) --> DR DB entry
(CONNECT_DATA =
(SERVICE_NAME = prod)
thanks in advance.
Edited by: 854393 on Dec 29, 2012 11:52 AM

Hello;
So in the example below replace "ernie" with the alias you want the client to use.
I can show you how I do it :
First an entry need to be added to the client tnsnames.ora that uses a SERVICE_NAME instead of a SID.
ernie =
(DESCRIPTION =
    (ADDRESS_LIST =
       (ADDRESS = (PROTOCOL = TCP)(HOST = Primary.host)(PORT = 1521))
       (ADDRESS = (PROTOCOL = TCP)(HOST = Standby.host)(PORT = 1521))
       (CONNECT_DATA =
       (SERVICE_NAME = ernie)
)Next the service 'ernie' needs to be created manually on the primary database.
BEGIN
   DBMS_SERVICE.CREATE_SERVICE('ernie','ernie');
END;
/After creating the service needs to be manually started.
BEGIN
   DBMS_SERVICE.START_SERVICE('ernie');
END;
/Several of the default parameters can now be set for 'ernie'.
BEGIN
   DBMS_SERVICE.MODIFY_SERVICE
   ('ernie',
   FAILOVER_METHOD => 'BASIC',
   FAILOVER_TYPE => 'SELECT',
   FAILOVER_RETRIES => 200,
   FAILOVER_DELAY => 1);
END;
/Finally a database STARTUP trigger should be created to ensures that this service is only offered if the database is primary.
CREATE TRIGGER CHECK_ERNIE_START AFTER STARTUP ON DATABASE
DECLARE
V_ROLE VARCHAR(30);
BEGIN
SELECT DATABASE_ROLE INTO V_ROLE FROM V$DATABASE;
IF V_ROLE = 'PRIMARY' THEN
DBMS_SERVICE.START_SERVICE('ernie');
ELSE
DBMS_SERVICE.STOP_SERVICE('ernie');
END IF;
END;
/lsnrctl status - should show the new service.
When I do this the Database will still register with the listener. I don't give that to the clients. That one will still be available but nobody knows about it. Meanwhile "ernie" moves with the database role.
So in my example the default just hangs out in the background.
Best Regards
mseberg
Edited by: mseberg on Dec 29, 2012 3:51 PM

How to use the result from a taglib?

Hi people.
I've been looking arround for some feedback on how to use the output generated by a taglib on jsp code but I haven't been able to find any.
Could somebody tell me how to do that please?

It works something like this:
The tab library consists of a class library and a tag libraray descriptor file. In your jsp header you include a taglib directive which associated athe TLD with a particular name prefix. Then you can include XML tags with that prefix and the tag library class to which they are connected will be invoked from the servlet that is generated from the JSP. This tag code can do pretty much anything, but usually what it mostly does is write HTML to the response stream. Opening tags and closing tags can both add whatever text they like to the stream which is sent to the client.
So including the tag in you JSP will usually suffice to cause generated output, it's up to the taglib.

I don't know how to use the canlendars function and the notes are kind of messy code,anyone help me

i don't know how to use the canlendars function and the notes are kind of messy code,anyone help me

Step by step:
1. On your main vi Front Panel, create your boolean indicator.
2. On the block diagram, right click the new boolean indicator and select Create - Reference.
3. On sub-vi front panel, create boolean indicator (or use one that is already created).
4. On sub-vi front panel, create a reference (Controls Palette - Refnum - Control Refnum).
5. Right click on the newly created Refnum and select Select Vi Server Class - Generic - GObject - Control - Boolean. The refnum label changes to BoolRefnum.
6. On sub-vi block diagram, create Property Node (Functions - Application Control - Property Node). Find the BoolRefnum and move it close to the new Property Node.
7. Wire the BoolRefnum to the reference input of the property node.
8.
Right click on the property node and select Change to All Write.
9. Move mouse to point to Visible inside property node box, left click and select Value.
10. Wire the boolean indicator from step 3 to the Value input of the property node.
11. On sub-vi front panel, right click on icon and select Show Connector.
12. Click on empty connector spot then click on the new BoolRefnum. Save your sub-vi.
13. On main vi block diagram, connect refernece created in step 2 to the new connector terminal of sub-vi.
14. Save and run.
Here are the modified vi's.
- tbob
Inventor of the WORM Global
Attachments:
Pass_a_Reference.vi ‏20 KB
GL_Flicker_mod.vi ‏83 KB

How to use the iviews to connect the backend R3 system?

Similar Messages

Maybe you are looking for