How to use the knowledge base category hierarchy?

Hi !
I read documents about the knowledge base, I know Oracle Text supplies English and French knowledge base, but I would like to know how to use it, how to handle it. If I want to had some themes, or delete some.
Is there a table containing the knowledge base?
Is there someone can help me? Thanks in advance
Have a nice day
PS : sorry for my poor english

Thank you very much M. Omar R Alonso for your reply.
I checked in the documentation how to use the ctx_query.hfeedback procedure, and I tried the example provided. But it doesn't work, the bt_feedback, rt_feedback, nt_feedback columms have never filled.
I'm not sure that the knowledge base is already supplied in Oracle Text, because also, when I execute a query like :
select ID_TXT, score(1) SCORE from TEXT_BASE where contains("idx_txt","sport",1)>1 order by SCORE DESC
The results are the same as
select ID_TXT, score(1) SCORE from TEXT_BASE where contains("idx_txt","about(sport)",1)>1 order by SCORE DESC
So, I don't know if it uses the knowledge base or not.
Thx again

Similar Messages

BAPI_BUSPROCESSND_CREATEMULTI how to use the activity-category parameter

Hi all,
I am trying to use BAPI_BUSPROCESSND_CREATEMULTI to create purchase orders.
I am having problems to use the Activity (header) Category field.
Among other parameters, in the INPUT_FIELDS table I have added a line for the field CATEGORY as follows:
REF_HANDLE = 0000000001
REF_KIND = A
OBJECTNAME = ACTIVITY
FIELDNAME = CATEGORY
Then I have added a line in the ACTIVITY table with:
REF_HANDLE = 0000000001
CATEGORY= ZSB
PRIORITY=5
But no results. The field is not entered in the purchase order I create.
Anybody could point out how to use this parameter in this BAPI?
Many thanks,
Aldo

Please fill category on order and after Enter debug crm_order_maintain function module.
This should help you to see where in function module this field should be filled.
you can also use crm_order_maintain for documents creation.
Regards
Radek

Repair Disk Permissions utility stalled - I have read the knowledge base

I have researched the knowledge base and search for posts on this and cannot find answer: Running 10.4 at the latest version. used the original install 1 disc I received with Tiger to repair disc permissions (like Apple support has told me to do in the past, but my current research said I do not need to do this unless certain parameters are met, and none of the parameters applied, but oh well, I am here anyway). Cold Boot from the original install disc 1 and slected the start up disk I use (I only have one start up disc/drive). Did a repair disc permissions and got a long running routine that reporting a lot of fixes, then the utility has stalled -- no progress on the progress bar. I "stopped" the process using the "stop repair" button (three times). The log reflected the utility stopped, but the progress bar still is blue and not moving (for a couple of hours). When I go to quity File >Disk Utility, it warns me that Disk Utility is running and this may make my system unstable/unsuable.
QUESTION: CAN I JUST QUIT DISK UTILITY AND NOT HAVE ANY ADVERSE AFFECT ON MY IMAC DRIVE?

Thanks for your advice, I still have an issue:
-after the first repair disk permission "stalled" process, I exited Disk Utility and cold booted the machine after I had disconnected all external devices other than the original iMac keyboard
-obtained the combo patch for 10.4.7 from the Apple download site (it had already been installed but I reinstalled per your advice)
-re-applied the combo patch and then did another cold boot
-ran Disk Utility from the original Tiger install #1 disk, and then selected "repair disk permissions" for my start up disk (I only have one)
- process ran for 10 minutes or so then gave the following error message: "Disk Utility Error: Disk Utility has lost its connection with disk utility management tool and cannot continue. Please quit disk utility and re-launch disk utility"
- I pushed the "stop disk permission repair" button, then quit disk utility, then cold booted the machine again.
-re-applied combo patch as above, then cold booted the machine
-ran disk utility from the original iMac install #1 disk, ran "repair disk permissions", and then received the same error message as above.
- I then just quit Disk Utility and cold booted the machine again and went about my business. There does not seem to be any problem with the machine (was not before, but I ran repair permissions thinkging this was a routine maintenance taks that should be run)
- in my prior search of the knowledge base, I found the following information about repair disk permissions:
Location: http://discussions.apple.com/thread.jspa?messageID=607495&#607495
How often should I Repair Permissions?
You do not need to Repair Permissions on a regular basis.
There are only three occasions you need to do this:
1. When you have just installed something that required you to run an Installer, rather than just copying some software to a folder. This should be done for both Apple and non-Apple software.
2. When you have been working on your OS X files or folders while booted from OS 9, or remotely connected via a non-OS X machine, since OS 9 and other systems do not handle OS X's permissions correctly.
3. The other case is if your system is behaving strangely, when you should run Disk Repair from your CD followed by Repair Permissions. This is just to eliminate these things before going on to further trouble-shooting.
Otherwise you can happily forget about Permissions!"
So, it would appear I do not need to do anything else; the machine seems to be working properly. Is there anything else I need to do? thanks for the help! Bob

How to use the repository; uploading reports from DEV to PROD...

Hello...
I'm fairly new to CR-XIr2 (SP3) but have worked with Crystal Reports since v6.0. I'm trying to figure out how to create a dynamic parameter list that someone can select an item from, which will get sent as an input parameter to the SQL Server 2005 stored proc that populates the report. I'm also trying to figure out if there's an easy way to copy reports from a DEV environment into PROD. We have BOE.
Basically, I would like to find out resources online or in books on how to use the BOE repository for dynamic and/or cascading parameters (i.e. pulling a list of text values & their associated IDs from a lookup table that won't be used in the report), images (i.e. corporate logo), etc.. What complicates things for us is that IT is now requiring us to use a DEV environmentit was really easy when we had unlimited access in PROD! We also need to put together a process where reports & other repository objects that are copied from DEV to PROD access the correct db, etc. (Crystal Report in DEV accesses DEV db/repository/etc.when copied to PROD it accesses PROD db/repository/etc.)
Anyway, I'm just looking for info on where to begin--whether it be a book, a BO/SAP knowledge base article, in-class training from a specific company, etc. Thanks!

Hey Markian,
Can you let me know the process you have followed to migrate from Dev to Prod.
We can migrate all the reports and objects and database fields through migrate wizard where you can import all the objects, reports and database fields and users to production enterprise.
Just follow the above scenario and let us know if you are facing any error.
Try publish the reports using import wizard and run it in the crystal designer.
Regards,
Naveen.

About query not using extended knowledge base

Hello,
I compiled a small thesaurus to the knowledge base:
ctxkbtc -user dcenter/dcenter -name THES_PLACE
It contains:
GERMAN
USE FEDERAL REPUBLIC OF GERMANY
UF FRG
BT EUROPE
NT BAVARIAN
I have 2 record, 1 containing GERMAN, 1 containing BAVARIAN.
Field is indexed with a context index, and the index is synchronized.
I'm using 8.1.7.2 english.
Using an ABOUT operator, I always get 1 hit.
SQL> select count(*) from file_info where contains (places, 'about(BAVARIAN)') > 0;
The (9i) doc says:
When you augment the existing knowledge base with your new thesaurus, you query with the ABOUT operator which implicitly expands to synonyms and narrower terms.
How can I get the ABOUT query to expand to the narrower term in 8.1.7.2? Is this a bug, do I have to upgrade, or am I missing something?
Thanks

Hello.
Did you load the supplied english thesaurus as your DEFAULT thesaurus using the command line utility ctxload (or some other method)?
I had the same experience until I loaded the sample thesaurus in $ORACLE_HOME/ctx/sample/thes/. Now my ABOUT and SYN queries work as expected though I still have a concern about the incomplete nature of the sample thesauri (I'll open a new thread on that topic).
Hope this helps.

How to calculate the quota base quantity in quota arrangement?

Hi all,
As we all know, when a new supplier is added in the quota arrangment, we take the help of quota base qunatity so that the new supplier does not get any unfair advantage over the existing suppliers. Would you please help me on how to calculate the quota base quantity or on what basis the quota base quantity is calculated?*
Regards,
Ranjan

Dear,
Quota arrangement divides the total requirements generated over a period of time among the sources of supplied by assigning a quota.
Quota u2013 quota is equal to a number and its represents the proportionate of requirements. Total quota of all the vendors is equal to 100% of requirements.
This quota arrangement is also specific to material and plant level.
Quota rating = quota allocate quantity + quota base quantity / quota.
Quota based quantity used only when a new vendor introduced.
In the as on date situation, the minimum quota ratings will considered as preferred vendor.
The 2 vendors has 2 same quota rating, the vendor who is having the highest quota will considered first.
In the running quota, a new source of supply is included. (In situation of short supply) including a new source not means to reduce the quota for existing.
Regards,
Syed Hussain.

How to use the change log in ODS to track Delta change?

People say that historical data (like Delta change) in ODS can be tracked in the Change Log. How to use the change log to track historic data?
Thanks

Kevin
See if it helps
Every ODS object is represented on the database by three transparent tables:
Active data: A table containing the active data (A table)
Activation queue: For saving ODS data records that are to be updated but that have not yet been activated. The data is deleted after the records have been activated.
<b>Change log: Contains the change history for delta updating from the ODS Object into other data targets, such as ODS Objects or InfoCubes for example.</b>
An exception is the transactional ODS object, which is only made up of the active data table.
The tables containing active data are constructed according to the ODS object definition, meaning that key fields and data fields are specified when the ODS object is defined. Activation queue and change log are the same in the tables structure. They have the request ID, package ID and the record number as a key.
Data base structure changes
http://help.sap.com/saphelp_nw04/helpdata/en/d2/d53ec3efdc9b47a9502c3a4565320c/frameset.htm
Hope this helps
Thnaks
Sat

How to use the "identify" feature in new 6.3.1 airport utility?

how to use the "identify" feature in new 6.3.1 airport utility?
so you can find the basestations in larger networks?

There is a workaround, which is to use Airport Utility 5.6.
I can confirm that 5.6 will run on 10.8.4 Mountain Lion, it will recognize the new 2013 Airport Extreme Base Station (A1521) running firmware 7.7.1, and it will give you access to view the device's Log & Statistics, DHCP Clients, and Profiles.
Four caveats:
1) The easiest way to install it is to download the app itself, not an installer or through the App Store. There is a page here where you can download the app: http://coreyjmahler.com/2013/03/08/airport-utility-5-6-on-os-x-v10-8-mountain-li on/ This way, you still have both versions, Airport Utility 6.x.x and 5.6.
2) When you launch 5.6, you'll get a message saying a newer version is available and asking if you want to update. Click Cancel to proceed into the utility.
3) When you click the Manual Setup button in 5.6, you'll get a warning dialog that "This version of AirPort Utility doesn't support this AirPort wireless device and might improperly configure the device if you continue to use it. Check www.apple.com/support/airport for the latest version of AirPort Utility." You can click Continue to get into the utility without issue.
4) You should probably only use 5.6 to view the additional status details. I have not tried to modify and save any AEBS settings using 5.6. There are other discussions here in the forums indicating that attempting to save settings via 5.6 that are no longer available in 6.3.1 will not actually save the settings to the AEBS even if both utilities indicate that the settings are changed. See https://discussions.apple.com/message/22677993#22677993
So, even though you can't use it to modify settings no longer available in Airport Utility 6.3.1, using Airport Utility 5.6 to view DHCP clients, Logs and Statistics is very useful for troubleshooting network issues.
PS - There are two ways to get to the DHCP Clients list, neither of which is obvious The first is to go to the Airport pane -> Summary tab and click on the "Wireless Clients:" label in the Summary display. All of the labels from "Wireless Mode:" down on the Summary display operate as links to view/edit the corresponding info/settings, which is also not obvious at first glance. Also not obvious, clicking on "Wireless Clients:" actually brings up a new pane with three tabs: Logs, Wireless Clients, and DHCP Clients. You can also get to the same pane by going to the Advanced pane and clicking on the Logs and Statistics button.
I hope this is helpful information. Took me a while to find out how to do this.

How to use the set functions effectively in webi ,please let me know with detail

how to use the set functions effectively in webi ,please let me know with detail

Hi,
we use use set functions on heirarchies with aggregate functions mostly .
If you include member_set, Min returns the minimum value of the aggregated data for all members in the member set.
Member_set can include multiple sets separated by semicolons (;).
The list of member sets must be enclosed in {}.
If the member set expression does not specify a precise member or node, the hierarchy referenced must be present in the table, then the member set expression references the current member in the hierarchy in the table. If the hierarchy is not in the table, the function returns the message #MULTIVALUE.
Eg .
1)     Ancestor
=Sum([YTD] ; {Ancestor([Test Hierarchy];2)})
2)     IsLeaf
=[Test Hierarchy].IsLeaf
You can use this function when you want to show your Measure only at lower level .
3)     .Depth
=[Test Hierarchy].Depth
This is also function used with hierarchy to find Level of Members .
Follow this link for PDF reference .
Page 147
https://www.google.co.in/url?sa=t&rct=j&q=&esrc=s&source=web&cd=2&cad=rja&ved=0CDIQFjAB&url=https%3A%2F%2Fhelp.sap.com%2Fbusinessobject%2Fproduct_guides%2Fboexir4%2Fen%2Fxi4sp5_ffc_en.pdf&ei=nBAUU-iUM4WWrAeMuoCoDg&usg=AFQjCNHakXsEjd_yUk2y3lVdibf3PXpEOA&bvm=bv.61965928,d.bmk
search on SCN this question was discussed before also one those links .
http://scn.sap.com/thread/3183380
Hope this will help you .

How to use the built in TV tuner in a GX 600???

Hi to everyone.
I would like to know how to use the built in tv tuner card in my gx 600.. I tried but it didnt detect any signal for tv..I wondering if I am doing something wrong. Your knowledge will be greatly appreciated.Thanks.
GX600 owner.

I am in Asia particularly in the Philippines Sir.
Yes I do see it in device manager labeled DVBT hybrid TV device. I think thats the tuner card right?
The program I am running to configure it is Windows Media Center, I am using a windows 7 OS..I connected the portable antenna and tried also a tv antenna but when it scans for signals it tells me it cant see any signal or channel at all.I am in a place where TV's connect to a channel even though your just using an aluminum tube..so signal is really good so I cant seem to figure out why it cant detect any..T_T.Thanks for your response sir..greatly appreciated.

How to use the same POWL query for multiple users

Hello,
I have defined a POWL query which executes properly. But if I map the same POWL query to 2 portal users and the 2 portal users try to access the same page simultaneously then it gives an error message to one of the users that
"Query 'ABC' is already open in another session."
where 'ABC' is the query name.
Can you please tell me how to use the same POWL query for multiple users ?
A fast reply would be highly appreciated.
Thanks and Regards,
Sandhya

Batch processing usually involves using actions you have recorded. In Action you can insert Path that can be used during processing documents. Path have some size so you may want to only process document that have the same size. Look in the Actions Palette fly-out menu for insert path. It inserts|records the current document work path into the action being worked on and when the action is played it inserts the path into the document as the current work path..

Okay so I set up my Time Capsule already and is now backing up 2 of my iMacs. Works great. What I want to know is how to use the TC to directly store files? I want to do this to delete some files but still have them on the TC for future reference..

Okay so I set up my Time Capsule already and is now backing up 2 of my iMacs. Works great. What I want to know is how to use the TC to directly store files? I want to do this to delete some files on iMac 20inch but still have them on the TC for future reference..eg some movies on iTunes. I want to directly save them on the drive so I can delete them from iTunes and gain some storage. (Ps on iMac 20 inch (it's almost full - 320 GB) when I enter time machine, a tab comes up on finder which reads "Time Machine backups" it's able to be ejected like a disc or a connected device. On the iMac 20 inch, I dragged some files onto there as if using it like a hard drive. Is this the correct method? Then I went to my 27inch iMac and saw the "Time Machine Backups" hoping to see the files I dragged from the 20inch iMac. But the files were not there except a folder that said "Backups.backupdb". Can someone help me?

It's not a good idea to use a network disk for both Time Machine backups and other things. By design Time Machine will eventually consume all the space on its output disk, which will then cause problem for your other files. I'd store those other files on an external disk connected to the Time Capsule. The problem with that is that Time Machine will only back up files that are local to your Mac. That means that you'll only have one copy of the files on or attached to your Time Capsule.
By the way, you've been misled by poor field labeling on this forum into typing a large part of your message into the field intended for the subject. In the future just type a short summary of your post into that field and type the whole message into the field below that.

JNI - How to use the error reporting mechanism?

I've developed a C++ DLL which is loaded from a commercial Win32 application (not written by me) as a plug-in for external calculations. On its initialization the C++ DLL launches the Java VM via the JNI invocation interface. When the DLL functions are called by the application, they forward the calls to Java objects inside the Java VM, again via JNI invocation interface.
This works well, but I have encountered a weird error.
From Java I open a JFrame containing a JTextArea as small console for debug output messages. If I turn output to this debug console off (my printToConsole routine checks whether a boolean flag is set), the string concatenation operator may lead to a crash of the Java VM.
For example, if in one of the Java functions called from the
DLL via JNI invocation interface the following is the first statement,
it leads to a crash of the Java VM and the application that loaded the C++ proxy DLL.
String test=""+Math.random(); // String test not used later
Interestingly, if I comment this statement out, the Java code works fine WITHOUT any crash. I've already thought about potential races and synchronization issues in my code, but I don't see where this is the case. And the string concatenation error fails as well, if I insert sleep() statements in front of it and at other places in the code. However, if I turn on log messages printed to my JFrame debug console (containing a JTextArea), the String concatenation works without problems.
So maybe the JNI interface has a bug and affects the Java VM; I don't see where my JNI code is wrong.
One problem is that I do not get any stdout output, as the C++ proxy DLL is loaded by the Windows application, even if I start the Windows application from the DOS command line (under Windows).
Does anyone know how to use the error reporting mechanism?
http://java.sun.com/j2se/1.4.2/docs/guide/vm/error-handling.html
Is it possible that the JVM, when it crashes, writes debug information about the crash into a file instead of stdout/stderr?
My C++ proxy DLL was compiled in debug mode, but the commercial application (which loaded the DLL) is very likely not.
I do not know hot to find the reason why the String concatenation fails inside the Java function called from the C++ DLL via JNI.

Yes, I've initially thought about errors in the C++ code too. But the C++ code is actually very simple and short. It doesn't allocate anything on the C++ side. It allocates a couple of ByteBuffers inside the Java VM however via JNI invocation interface calls of env->NewDirectByteBuffer(). The native memory regions accessed via the ByteBuffers are allocated not by my own C++ code, but by the program that calls my DLL (the program is Metastock).
The interesting thing is that everything works fine if output to my debug console is enabled, which means that in the Java print routine getConsoleLoggingState() returns true and text is appended to the jTextArea.
static synchronized void print(String str)
{ MetaStockMonitor mMon=getInstance();
if ( mMon.getFileLoggingState() && mMon.logFileWriter!=null) {
mMon.logFileWriter.print(str);
mMon.logFileWriter.flush();
if ( mMon.getConsoleLoggingState() ) {
mMon.jTextArea1.append(str);
Only if output to the JTextArea is turned off (ie. getConsoleLoggingState()==false), the crash happens when the FIRST statement in the Java routine called via JNI invocation interface is a (useless) String concatenation operation, as described above.
String test=""+Math.random(); // String test not used later
Moreover, the crash happens BEFORE the allocated ByteBuffer objects are accessed in the Java code. But again, if console output is turned on, it works stable. If console output is turned off, it works when the (useless) String concatenation operation is removed in the Java routine called from C++.
I've already thought about potential races (regarding multiple threads), but this can be ruled out in my case. It almost appears as if the JVM can have problems when called by the invocation interface (I tested it with Java 1.4.2 b28).
All the calls between C++ and Java go ALWAYS in the direction from C++ code to Java. Unfortunately, there is no special JRE version with extensive logging capabilities to facilitate debugging. And the problem is not easily reproducible either.
JNIEnv* JNI_GetEnv()
JNIEnv *env;
cached_jvm->AttachCurrentThread((void**)&env,NULL);
fprintf(logfile,"env=%i\n",env);
fflush(logfile);
return env;
// function called by Metastock's MSX plug-in interface
BOOL __stdcall createIndEngine (const MSXDataRec *a_psDataRec,
const MSXDataInfoRecArgsArray *a_psDataInfoArgs,
const MSXNumericArgsArray *a_psNumericArgs,
const MSXStringArgsArray *a_psStringArgs,
const MSXCustomArgsArray *a_psCustomArgs,
MSXResultRec *a_psResultRec)
a_psResultRec->psResultArray->iFirstValid=0;
a_psResultRec->psResultArray->iLastValid=-1;
jthrowable ex;
jmethodID mid;
JNIEnv* env=JNI_GetEnv();
jobject chart=getChart(env, a_psDataRec);
if ( chart==NULL) {
return MSX_ERROR;
jobject getChart (JNIEnv* env, const MSXDataRec *a_psDataRec)
jthrowable ex;
jmethodID mid;
int closeFirstValid, closeLastValid;
closeFirstValid=a_psDataRec->sClose.iFirstValid;
closeLastValid=a_psDataRec->sClose.iLastValid;
long firstDate, firstTime;
if (closeFirstValid>=1 && closeFirstValid<=closeLastValid) {
firstDate = a_psDataRec->psDate[closeFirstValid].lDate;
firstTime = a_psDataRec->psDate[closeFirstValid].lTime;
} else {
firstDate=0;
firstTime=0;
jclass chartFactoryClass = env->FindClass("wschwendt/metastock/msx/ChartFactory");
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot find class ChartFactory\n");
printSBufViaJava(sbuf);
return NULL;
mid = env->GetStaticMethodID(chartFactoryClass, "getInstance", "()Lwschwendt/metastock/msx/ChartFactory;");
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot find method ID for ChartFactory.getInstance()\n");
printSBufViaJava(sbuf);
return NULL;
jobject chartFactory=env->CallStaticObjectMethod(chartFactoryClass, mid);
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Exception while calling ChartFactory.getInstance()");
printSBufViaJava(sbuf);
return NULL;
mid = env->GetMethodID(chartFactoryClass, "getChartID", "(Ljava/nio/ByteBuffer;Ljava/nio/ByteBuffer;Ljava/nio/ByteBuffer;Ljava/nio/ByteBuffer;IIIIIII)F");
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot find method ID for ChartFactory.getChartID()\n");
printSBufViaJava(sbuf);
return NULL;
jobject symbolBuf=env->NewDirectByteBuffer(a_psDataRec->pszSymbol, strlen(a_psDataRec->pszSymbol) );
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot allocate symbolBuf\n");
printSBufViaJava(sbuf);
return NULL;
jobject securityNameBuf=env->NewDirectByteBuffer(a_psDataRec->pszSecurityName, strlen(a_psDataRec->pszSecurityName) );
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot allocate securityNameBuf\n");
printSBufViaJava(sbuf);
return NULL;
jobject securityPathBuf=env->NewDirectByteBuffer(a_psDataRec->pszSecurityPath, strlen(a_psDataRec->pszSecurityPath) );
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot allocate securityPathBuf\n");
printSBufViaJava(sbuf);
return NULL;
jobject securityOnlineSourceBuf=env->NewDirectByteBuffer(a_psDataRec->pszOnlineSource, strlen(a_psDataRec->pszOnlineSource) );
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot allocate onlineSourceBuf\n");
printSBufViaJava(sbuf);
return NULL;
// Java Function call leads to crash, if console output is turned off and
// the first statement in the Java routine is a (useless) string concatenation.
// Otherwise it works stable.
jfloat chartID=env->CallFloatMethod(chartFactory, mid, securityNameBuf, symbolBuf,
securityPathBuf, securityOnlineSourceBuf, (jint)(a_psDataRec->iPeriod),
(jint)(a_psDataRec->iInterval), (jint)(a_psDataRec->iStartTime),
(jint)(a_psDataRec->iEndTime), (jint)(a_psDataRec->iSymbolType),
(jint)firstDate, (jint)firstTime );
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Exception while calling ChartFactory.getChartID()");
printSBufViaJava(sbuf);
return NULL;

How to use the t-code vf31 tor taking print out of invoice

Hi,
How to use the t-code vf31 for taking print out,am getting an error like no message for initial processing exist,
venu

Hi,
Please find the steps
Output type                     RD00
Transmission medium             1
Sort order                      01
Processing mode                 1
Please give the oppropriate fields,
if the still error persists check the configuration in NACE transaction code.
thanks
Kuntla

How to Use the same iview for both KM End User and the KM Administrator

Hi friends,
*This is my scenario :* How to Use the same iview for both KM End User and the KM Administrator but with different Context
Menu Options.
i followed these steps but im getting same context menu for both KM End User and the KM Administrator .
Assign the role Content Administrator to the user km_admin. This is needed so that km_admin can change
the presentation settings for the KM Folder u201EReports_kmFolder‟.
Now, login with user km_admin. Navigate to the Km Folder reports_kmFolder through Content Administration
-> Km Content. Click on Details link of the folder reports_kmFolder.
Go To Settings -> Presentation. Click on the tab u201ESettings for You‟-> Click on button u201ESelect Profile‟.
Select the radio button corresponding to u201Elayout Set‟, and choose u201EConsumerExplorer‟ from the dropdown.
Click u201EOK‟.
Select both the check boxes corresponding to Items Affected as shown above, and click u201ESave‟
Now, remove the u201ESuper Administrator‟ role from the user km_admin and login with this user.
How rto resolve this????
Regards,
Prasad.

Hello Prasad,
Most likely the user km_admin still has system principal roles assigned, even though you removed the Super Admin role, you should check that this user doesn't have any other admin roles, otherwise it will be considered a System Principal user and will therefore still have access to all content. For more information see http://help.sap.com/saphelp_nw70/helpdata/en/19/56f28fbd4e11d5993b00508b6b8b11/frameset.htm
Try creating a new user with just read access to the content and you should see that it will not be able to make any changes etc.
Regards,
Lorcan.

How to use the knowledge base category hierarchy?

Similar Messages

Maybe you are looking for