How to use the Masks in SRM-MDM catalog?

Hi Expert,
We are at SRM-MDM catalog 3.0.
There have  two types of SRM contracts were transferd to one MDM catalog repository, and we config two different number range for these contract types. We will creat two web services in SRM IMG, only the same number ramge of the contracts could diaplay in one web service.
As this requirement, may be the MDM function Masks could be a solution I think. But when I try to separate the contracts with two masks in MDM Data Manager, I have no idea that how could I set the key filter with the contract number fields.
Could every expert tell me how could i set the Masks as this situation?

Hi
Have you assigned the masks created in data manager to some role in Console(Console-Roles TableRole1-Table and fields tabMask--add Mask 1 say)
Once the mask is assigned to the role then only the role can see records pertaining  to that mask else it can see all the records in the repository.
Regards
Nisha

Similar Messages

  • Use of Hyperlink in SRM MDM Catalog

    Hii Experts,
    Can somebody help me with images upload using hyperlink table in SRM MDM catalog. Images are maintained in central repository
    Regards,
    Poonam Kanade

    Hi Poonam,
    the format of the URL should be as follows
    "file://"
    For example: "file://pwdf123/share/abc.jpg"
    Regards,
    Tamá

  • How to add custom field in SRM-MDM catalog

    Hi Guys,
    I have to add a custom field in SRM-MDM catalog. I know, it is done through MDM console, but how, it is done, This, I don't know.
    Please help me.
    Thanks in advance!!
    Note-> we are at SRM5.0 + MDM2.0
    Neelesh

    Please check the online help.
    [http://help.sap.com/saphelp_mdm550/helpdata/en/6c/24e342f6307176e10000000a1550b0/frameset.htm|http://help.sap.com/saphelp_mdm550/helpdata/en/6c/24e342f6307176e10000000a1550b0/frameset.htm]
    Regards,
    Masa

  • How to use UNSPSC code in SRM MDM ?

    Hi,
    We are in migration from CCM 2.0 SRM MDM.
    In CCM , we are uploading the catalogs with UNSPSC and material group. Either any one is mandatory.
    If they give UNSPSC code in catalog, while uploading we are mapping to correspoding material group.
    But in SRM MDM , we dont have UNSPSC table it self. We will create that table in main structure of MDM catalog.
    But how to map the UNSPSC code to material group?
    Mapping is available in SRM table.
    Please give me some ideas..
    Regards
    Venkatesh P

    solved by myself

  • Using the mask tool.. need help

    The StudentFilmmakers magazine has an Adobe forum with an After Effects section and we have a few questions that need answers. Here is a link to one and below is the question.
    http://www.studentfilmmakers.com/bb/showthread.php?t=4830
    "Hey! I'm experiencing After fx for the first time.... and I wonder how I use the mask tool to remove something in a movie clip.
    I have a clip with a boy jumping on a trampoline....then I want to cut out the background and insert a mountain cliff so it seems that he falls from the cliff.....
    How ?? "
    We love Adobe products and we feature film and video makers from out networking section each issue. We very much apreciaete help from professionals or knowlegable people. You are welcome to put your links in your signature and we do reward our posters and feature networkers in the magazine.

    Better answer??
    - Place the movie in the timeline creating a new composition of the size of your footage or drag it onto the "create new Comp" icon.
    - interpret your footage properly
    - use the pen tool and start to draw a mask around your jumping trampoline guy at the very first frame of your timeline
    - open the mask properties of your movie layer and click the stopwatch icon to create a keyframe for the mask shape properties
    - now move one frame forward in the timeline and readjust the mask - keyframes will be added automatically for you
    - if done, move next frame in timeline and readjust your mask
    - if done, move next frame in timeline and readjust your mask
    - if done, move next frame in timeline and readjust your mask
    - if done, move next frame in timeline and readjust your mask
    - if done, move next frame in timeline and readjust your mask
    - if done, move next frame in timeline and readjust your mask
    - ... if done with all, click the "show transparency" button of your comp window. place your mountain underneath the masked movie and you're done.
    this is called rotoscoping and makes a lot of fun.
    if your actor was shot in front of a green screen or a blue box, you could use the Ae keying plugs and make this process a lot easier, of course i would not recommend a desk lamp for lighting your scene and not a $ 100,- videocamera from Wal Mart.
    better answer?

  • Setting up SRM-MDM catalog 2.0 in PI 7.0

    Hi guys,
    Iu2019m configuring the scenario for SRM-MDM catalog 2.0 and in the IR when I open the configuration scenario SRM_MDM_Catalog I get the following error:
    u201CSoftware component version with GUID 44345e20-149b-11da-ab19-eb7a0a114c15 does not existu201D
    I went to a demo system and I found that this GUID belongs to the SWC SRM SERVER 6.0. So, it means this object SRM_MDM_Catalog  from SWC SRM-MDM catalog is referencing some object in the SWC SAP SRM SERVER 6.0.. However, we are not working with SRM 6.0 but with 5.5 releases.
    I also went to service marketplace and I didnu2019t find the package for SWC SAP SRM SERVER 6.0.
    Without this SWC I canu2019t skip this error!! Anyone has faced this issue before? How can I get the PI content for SAP SRM SERVER 6.0.?
    Thanks in advance,
    Ricardo.

    I fixed by myself.
    It seems the XI content "SAP SRM SERVER 6.00" is not yet available for customers, but a SAP friend sent me the content. Now the problem it's fixed.
    Regards,
    Ricardo.

  • Inactive Catalog item still display in SRM - MDM catalog

    HI,
    I have one new issue in SRM-MDM catalogs.
    For Catalog Item there is one field called 'status' having value Active and Inactive and I change the status to Inactive for one of the Catalog item in Data manager but when i access the same in SRM - MDM catalog from Shopping cart, the Catalog item still display there.
    Does anyone guide me.
    Smriti

    Hi experts,
    I'm facing the same issue...
    I check the NAMEDSEARCH parameter used in the Catalog definition in SPRO and in some cases we have data in this field and in other cases we haven't. Is this a problem?
    Thanks for your help
    Regards,
    FS

  • Installation of SRM MDM Catalog

    Hi SAP Mentors,
    We are installing SRM MDM Catalog. I needed some clarification regarding the same. The version for SRM MDM Catalog is 7.02. Do I need a SRM 7.02 server with MDM 7.1 installed on it , on which I will be putting SRM MDM Catalog?
    Please let me know as we need to start installation Monday. The docs are not very clear.
    Thanks,
    Asad

    Zafar,
    Yes. You need to have same release including the patch level. We experienced similar scenario and resolved all issues only after syncing the release and SP level.
    hope it helps.
    Regards,
    Srinivas K.

  • How to use the same mask, stencil, etc., for multiple layers? Photoshop equivalent of masked group?

    Hi I spent more than half an hour to search manual, forums, and Internet and still can't find the answer. Please help!
    For example, in a comp with 5 or more layers I want to use the same mask or stencil or what ever can hide areas of the layers 2,3, and 4 but layer 5 and any other eventual layers below should not be affected.

    Pre-compose the layers you want to mask and apply a track matte to the pre-comp using the mask. Think of pre-composing as an equivalent of creating a layer group.
    Use Set Matte effect on each of the layers you want to mask. This is easiest to do if you apply set matte once and then create an animation preset to apply to the other layers. Just get set matte to do what you want it to do on the first layer, Select Set matte in the ECW or in the Timeline, then go to Animation>Save animation preset. Then select all of the other layers you want to apply the set matte to and apply the preset.
    Put the mask at the bottom of the layers you want to mask and enable the preserve transparency switch, then nest this group in the composition with the other layers.
    Here's another tip. You could define a custom color for all of the layers you want to use the matt on, then use the custom color for a group selection. This may make things easier down the line.

  • How do you use the MASK tool with 4K footage?

    Hi everyone!
    Normally when I use the mask tool, I drag it onto the footage and four nodes appear on the clip, one in each corner - and then I can move each corner to where I want it...
    I've just shot some 4k footage using a Canon 1d-c and for some reason, when I drag the Mask onto the footage, the four nodes still appear but I can't move them around!
    Does that make sense?
    Any help would be massively appreciated!
    Thanks in advance!

    There shouldn't be any difference in being able to adjust them just because you're using 4K. I can't reproduce the problem and can't think of a reason why it would happen. Hopefully someone else will chime in.
    Russ

  • How to copy the SRM-MDM Catalog from PRD to QAS system

    Dear all,
    We do have a SAP SRM-MDM Catalog system.
    In the production system, we do have 3 differents repositories.
    I want to copy a SRM-MDM Catalog from PRD to QAS system.
    Is there a tool to export the catolog from PRD and to import it in QAS system ?
    Thanks
    SAP NetWeaverAdmin
    Edited by: SAP NetWeaverAdmin on Nov 3, 2011 3:10 PM

    Archive repository from source system
    Unarchive into target system

  • What is use of Hyperlinks and Pdfs in srm-mdm catalog??

    Hello friends,
    I have added one Pdf file in data manager, in this, it is showing no thumbnail. But in EBP it is not showing any Pdf file. can suggest how to show this Pdf loaded file in EBP(Enterprise Buyer Professional). i dont know whats the purpose and how to use hyperlinks in srm-mdm catalog. Also why there is MIME types and Hyperlinks type look up tables in srm-mdm catalog repository. how to use them?
    Please do suggest........
    Regards,
    Mandy

    Hi Mandy,
    You can do this:
    On the MDM Console, right click on the Repository -> Properties -> PDF -> Allow invalid PDFs -> Yes .
    Alternatively,
    You can also find some information about it on https://service.sap.com/srm within this link on the left frame go into
    mySAP Supplier Relationship Mgmt --> mySAP SRM in Detail --> SRM 5.0 --> Catalog Content Management --> SRM-MDM Catalog and you will get the document.
    Hope it helped.
    Regards,
    Krutarth

  • SRM-MDM-Catalog and  XI using HTTP

    I need to do a integration between SRM 5 and SRM-MDM-Catalog using XI.
    I imported the SRM-MDM-Catalog packages into the XI and I saw that all connections with MDM are using FTP in the comunnication channel template.
    Is it possible to do connections for MDM using http or soap?

    As far as I know using Files is how XI interacts with MDM. All scenarios I have seen on SDN have been with File adapter being used on MDM 's side.
    Maybe there is a way , am watching this thread as well.
    Regards
    Bhavesh

  • Is use of flat file in SRM-MDM catalog search UI possible ?

    Hello,
    When user looks for materials inside SRM-MDM catalog (using search user interface), search is done manually with free form or drill down search.
    Then, among the search result, user has to select items he wants to add to his shopping cart and finally transfer those items from his shopping cart overview inside SRM.
    Is it possible to automate this user selection using for exemple a flat file uploading (or any other way you could know) ?
    This flat file will have material number (or service), supplier code and quantity (no more information).
    The aim of the request is to help requester to not have to select each item one by one (in the search result) knowing that :
    -  SC will have more than a hundred items,
    - delivery time and price (for example) must be checked in MDM, being the master data reference
    - materials (or service) to order are received by requester via a flat file without any information about prices, so i cannot upload my flat file directly into SRM because file missing data must come from MDM.
    With this process, user should have only to transfer items automatically selected.
    Could you please share your advises ?
    We use SAP MDM 5.5.
    Regards.
    Laurent.

    Hello Masa,
    Masayuki Sekihara wrote:
    A vendor look at buyer stock information like VMI and fill stock weekly base. So the vendor sends material number and quantity information as flat file to buyer. Buyer should create SC from flat file and price information should fetch from catalog.
    Yes, your are correct: example you gave corresponds to process for my SC uploading.
    Regards.
    Laurent.

  • How to Use the language function for assignment and validation

    Hi All,
    If anyone can explain me in details with example ,how to use the language function for assignments and validations?
    Thanks
    Arnab

    Hi Arnab,
    The expression is checked only for the current MDM session.
    If u login with the ABC language it will always show the ABC language no matter how many times u execute it.
    Try connecting to the DM with the XYZ language.
    It should go to the if part rather than else.
    Hope it helps.
    Thanks,
    Minaz

Maybe you are looking for

  • J2EE Server does not start  -  jcontrol.exe  stopped

    Hello, I have read a lot of messages on this topic on SDN. But I did not find any dealing exactly with my problem. Indeed, I got these two following errors : <b>** in log file dev_bootstrap</b> : [Thr 3720] *** ERROR => JHVM_LoadJavaVM: Cannot create

  • Unable to download OSX Mountain Lion, and iTunes 11 update not working.

    Hi there, I paid for OSX Mountain Lion and was ubale to download, keeps given error or something similar. Now I can't seem to update iTunes. Please advice.

  • No Sky interactive services on BT Vision??

    Hello Is it true that I cannot use Sky interactive services through BT Vision. If so is this not something customers should be informed of before choosing BT vision services?!  Sorry if a similar post exists in the forum already. Cheers Arun Solved!

  • Cookie problem and intermittent redirect fail.

    This code fragment:- Cookie k00lCookie1 = new Cookie("username", cookieUsername); k00lCookie1.setMaxAge(9999999); k00lCookie1.setPath("/"); response.addCookie(k00lCookie1); rd.forward(request, response); Is intermittently causing the following error

  • HOW I CAN USE LOGIC TO BURN AUDIO CD?

    I BEEN USING LOGIC FOR LONG TIME,I'M TRYING TO BURN THE MIX (AIFF) TO A REGULAR CD AUDIO BUT I CANT SO MANY PROBLEMS!!! IF SOMEONE CAN GIVE A HAND ON THIS! THANKS