How to use the Optical in on 002r with Logic Studio?

Hi there
i'm trying to figure out a problem that i really can't find a solution,i'm using Logic studio 8 whith Digi 002rack and 7.4 core audio version,my question is how to select in logic the optical IN of the 002r that in my case is connected to my triton rack synth?
i can use the spdif in of the 002 but i can't find a way to use the optical in.
thanks all

I dont know if you will be able to connect other device like PS3 or Wii.
As far as I know only the Xbox 360 could be connected to a Qosmio and could be used with the Windows MCE.
I presume this is possible due to connection of Microsoft products; MCE and Xbox360
To be honest; why you dont take a look into the user manual if this notebook is new to you?
All details are mentioned in the user manual which is already preinstalled on the notebook.

Similar Messages

  • Has anyone figured out how to make the Yamaha 01V96i mixer work with Logic 9.1.8

    Has anyone figured out how to make the Yamaha 01V96i mixer work with Logic 9.1.8 as a control surface ?

    In YAMAHA01v96i:
    Go to DIO/SETUP select Generic DAW. Go to MIDI settings page and set the desired port (personally I use Number 1), Select the same audio frequency you use in your DAW (I use 44.1KhZ)...at this point You should save a scene in you 01V96i to avoid to repeat all the procedure again.
    Open studio manager, go to patch and set the input port from 17 to 32 respectively to USB1-USB16 (this will give you the return from you DAW to the 01v96i
    Save again the scene overwriting the old one.
    in LOGIC
    Click on preferences, select Audio then select 01v96i, then click on control surface and select Mackie design Baby HUI and in the midi session set the same port that you've been setting on the Yamaha 01V96i (Port 1 if you follow this example).
    That's more or less it.
    It worked for me...so far

  • How do I get the Korg NanoKontrol to work with Logic Studio?

    I just bought a Korg NanoKontrol control surface to use with Logic Studio but it isn't working right. I can get the faders and pan to work in one scene but the transport controls don't work in any scene. If anyone knows anything about how to get it to work please let me know.

    Hey Scrooge, why the attitude? Did anyone here mistreat you? And why hijack the thread?
    Anyway, if you loose settings minutes after they worked, I would say the hardware may be shaky. Or the cabling. Or the operators' skills.
    Ambient8 has gracefully and concisely pointed the way, and if something is not working just describe what and how it is, instead of complaining (on somebody else's thread) to people who voluntarily try to offer help & solutions.
    Ambient8:
    +"Pay special attention to "Assigning Key Commands to Control Surfaces" on page >164+
    +The rest need to be set up as a control surface by using the Learn (Command+L) function to assign faders to tracks and knobs to pans, etc.+
    +See the Logic Pro 8 Control Surfaces Support guide in the Help menu for info on controller assignments. Chapter 2 "Customizing Controller Assignments" has the info assigning controllers to Logic Pro parameters."+
    If you say I did exactly as described on these pages, and all your settings seemed to disappear, I can only assume that either something is wrong with your Logic prefs, the logic.cs file or the CS itself.
    Regards, Erik.

  • How to use the Eudora e-mail program with new ports

    For those of you that still use Eudora as your mail program. Here is how I made the required changes for the new port settings
    1) Open Eudora and from the "Tools" drop down menu select "Personalities"
    2) In the "Personalities" pane - right click the account you want to change and select "Properties"
    3) In the "Generic Properties" pane change the following
       a) Change the SMTP server to    smtp.verizon.net      and leave the "Authentication Allowed" box checked
       b) In the"Secure Sockets When Sending" selection box pick "Required,Alternate Port" . This both turns on SSL
           and makes the port  number 465 as required by Verizon
    4) Click the "Incoming Mail" tab at the top and then make the following changes
       a) Change the POP server to     pop.verizon.net
       b) In the"Secure Sockets When Sending"  selection box pick "Required,Alternate Port" . This both turns on SSL
            and makes this port  number 995 as required by Verizon
    Thats it . It should work for you now. You need to do this for each "Personality" (Sub account) you have

    Eudora users may also need to make changes to Eudora's Options (Tools > Options) "Getting Started", "Checking Mail" and "Sending Mail" in addition to the changes for each Eudora Personality. I outlined those changes in the "Eudora & server changes" thread--note there is a typo ("smpt" rather than "smtp") in the first post (couldn't edit that post to make the correction) in the thread so make sure to check the entire thread as a later post shows the correct entry.
    I had problems with Eudora sending mail (I didn't have problem with incoming mail because I don't use Verizon's servers for that) until I made changes to both Personality accounts and to the Option/suboptions noted above.
    Did you get things to work properly without having to make changes in Options?

  • How to use the discrete unit delay function with the simulate signal as the input?

    Hi there,
    I want to use the simulate signal as the input. First, i downsample the input with the downsampler.vi. Then I want to feed the output of the downsampled signal to the discrete unit delay block and display the delayed signal on the graph.
    Somehow I can't use the delay block properly, do anyone know how to fix that?T_T
    thanks!!!!
    Ivy
    please see the attachment
    Attachments:
    test.vi ‏164 KB

    Hi nozombie,
    In your VI the Delay VI only delays the measurment for one interation of your simulation loop.  What are the results that you hope to see?
    Regards,
    Mike Altmann
    LabVIEW Platform PSE
    National Instruments

  • How to use the JRun Custom tag library with Weblogic 5.1?

    Hello,
              is it possible to use the JRUN Tag Library with Bea Weblogic 5.1? We
              got an error message like:
              weblogic.servlet.jsp.JspException: (line -1): Error in tag library at:
              'jrun': T
              here is no setter method for property 'code', for Tag class
              'allaire.taglib.Serv
              letTag'
              Thank you for any info!
              Stefan
              

    Hi Joe,
    I don't know, however someone that follows the JSP newsgroup [1] may be
    able to help. Could you try your post there.
    Thanks,
    Bruce
    [1]
    http://newsgroups.bea.com/cgi-bin/dnewsweb?cmd=xover&group=weblogic.developer.interest.jsp
    Joe Kamenar wrote:
    >
    I have a question. I need to do a sort on news articles in our database, sorting
    by the date they were posted. I then want to take only the top 6 articles. We
    are using Weblogic 5.1. When I use the following statement, 6 articles are taken
    from the database, then sorted, which ends up leaving out the most recent articles:
    <cm:select contentHome="com.beasys.commerce.axiom.document.Document" query="<%=contentQuery%>"
    sortby = "creationDate DESC, headlineDate DESC" max="6" id="contentList" />
    I need to get ALL the articles for the sort, then just take the most recent 6.
    So, I know that I can use the following code and monitor the counter variable,
    "i". But, how do i do this to only display the top 6 items?
    <es:foreachinarray id="content" array="contentList" type="com.beasys.commerce.axiom.content.Content"
    counterId="i">
    <% myStr=content.getIdentifier(); %>
    <% if (i<6) {
    %>
    <div class="marginText">
    <cm:printproperty id="content" name="title" encode="html" />  
    <a href="<%=new String(news_display.jsp?id="+myStr)%">">more</a>
    </div>
    <% } %>
    </es:foreachinarray>
    However, when I run this, no results show up. What is the correct way to do this?
    - Joe</a>

  • How to use the discrete unit delay block with the waveform as the input data type?

    Hi,
    I'm using LabView 2011 to implement a design system. I want to first downsample the input signal and then go through the discrete unit delay function. However, after the unit delay function, i don't get the right output, is there a way to fix that?
    The input is fixed to be the simulate signal since i'm using it for other implementation as well and i don;t want to change it.
    plz see the attachment , thx!
    Attachments:
    test2.vi ‏355 KB

    Hi Tim,
    Thanks for replying!
    What u did is exactly what I want except that I want to downsample the simulate signal first before I put it into a delay block.
    I tried what u said, however, it only works for very small frequency such as 0.01 Hz. When I set the input to 10 Hz, the delay block doesn't work at all. For the diagram u have, what is the input frequency u set to the simulate signal?
    The reason I'm use the Express VI is because I use it as the input of the frequency estimation block. So basicly what I'm doing is :
    sine wave ->downsample it->delay the downsampled signal and do some numerical calculation(adding,multipling) ->estimate the frequency of the output signal -> this frequency is used to determin the sample factor in the downsampling process.
    I attached the VI with the downsamped involved
    I can't copy the downsample.vi because I use the evaluation version 30 days for that toolkit .
    I attached the VI for frequency  estimation as well.
    Thanks so much!
    Ivy
    Attachments:
    Testing.vi ‏238 KB
    Frequency Estimation.vi ‏61 KB

  • How to use my TS 12 Ensoniq keyboard with Logic Pro X

    I just got Logic Pro X but I have no idea how to use my midi keyboard. I have a midi to usb cable running between my TS-12 Ensoniq keyboard. How do I set up the drivers or really just get it all to work. I'm a noob to the hardware stuff though I'm quiet fimilar with Logic 9. Help would be great asap!

    AidansMarbles wrote:
    I have a midi to usb cable running between my TS-12 Ensoniq keyboard.
    So I guess it can make the sound of one hand clapping?
    Anyway...
    Does the USB-MIDI cable need drivers? What brand is it? There are some cheap ones floating around ebay that don't work properly with all hardware. Assuming you've got a working one that needs no drivers, all you need to do is plug it in, the OS and Logic should detect it automatically. In Audio MIDI Setup (MIDI page) you can check if your Mac indeed recognizes the MIDI interface. It will not show the TS12 itself, just the MIDI interface.
    You can find Audio MIDI Setup in Applications>Utilities.

  • Using the MXL USB.006 microphone with logic express 7.2.3

    When I have the USB audio codec selected in logic express 7.2.3 (macbook pro, intel dual core) I cant get any sound from my speakers on the laptop, or the headphones I use with the laptop headphone jack. I can record vocals but can't hear playback. If I switch to the built-in audio driver for the macbook pro, I can hear the vocal I recorded on the MXL, but with the built-in driver selected, I can't record with the mic.
    Is there a solution for this?

    Hi md,
    I think if you look up Aggregate device in help it's what you need. You create one in Audio MIDI set up which allows for input via the USB microphone, and output through built in audio. Then Select it in Mac Sound Preferences.
    Good lck,
    Ray

  • How to use the database change notification event with an AppModule Child ?

    hi,
    I try to do the same stuff that this "How To" : [http://niallcblogs.blogspot.com/2009/06/auto-refreshing-adf-chart-objects-in.html].
    This example works fine, but I want an Application Module Root which contains the Application Module which contains the VO where there is the method processDatabaseChangeNotification.
    I have trying all the configuration possible of AppModuleRoot and AppModuleChild: Shared/Local, Local/Shared and even Local/Local ... but nothing works ...
    Can you tell me if possible, and if so ... how?
    thanks !
    (I use jdev11g)

    I don't find my reponse in the documentation....
    I have an AM Child in an AM Root like that :
    <AppModuleUsage
    Name="AppModuleChild"
    FullName="model.AppModuleChild"
    ConfigurationName="model.AppModuleChildShared"
    SharedScope="2" />
    My AM Root is Shared in the file "DataBinding.cpx" :
    <BC4JDataControl id="AppModuleRootDataControl" Package="model"
    FactoryClass="oracle.adf.model.bc4j.DataControlFactoryImpl"
    SupportsTransactions="true" SupportsFindMode="true"
    SupportsRangesize="true" SupportsResetState="true"
    SupportsSortCollection="true"
    Configuration="AppModuleRootShared" syncMode="Immediate"
    xmlns="http://xmlns.oracle.com/adfm/datacontrol"/>
    ... and the database change event notification don't work... I don't understand !

  • Can anyone tell me how to use the loops and backing tracks with a single guitar input? I can't seem to figure out how to set this up

    I am trying to configure Mainstage to input my own guitar and add a backing track from the library or a loop but, I can figure out how to open or add the tracks I've downloaded. Any help would be great

    did you try the PlayBack preset/template?
    once you open the PlayBack plug-in you just load the tracks from the plug-in's menu.

  • HT1688 I am trying to find answers about how to use the earphones that came with my new iPhone 4s. Does this work similarly as a Bluetooth or do I need to still buy one. The printing in the manual is SOOO small, it is too hard to read!

    Does anyone know how to use the earphones( plugs) that come with iPhones?
    Mine is still fairly new and I am just learning how to use certain things.

    They're pretty straightforward. You plug them into the headset jack (the hole on the top left of your phone). You put the buds in your ears. All sounds, except for the phone ringing will now come through the earbuds.

  • Script logic - how to use a selection variable within an allocation logic

    Hi,
    I want to implement a simple top-down distribution to distribute values from a yearly budget (Y20xx.TOTAL) to a quarter budget (Q20xx.Q1, ... Q20xx.Q4) using the actuals of the previous year as reference.
    If we hard code the members it works fine:
    *RUNALLOCATION
    *FACTOR=USING/TOTAL
    *DIM ACCOUNT WHAT=ACC_NOT_ASSIGNED; WHERE=BAS(FIN); USING=<<<; TOTAL=<<<
    *DIM TIME WHAT=Y2009.TOTAL; WHERE=BAS(Q2009.TOTAL); USING=BAS(Q2008.TOTAL); TOTAL=<<<
    *DIM CATEGORY WHAT=SBO; WHERE=<<<; USING=ACTUAL; TOTAL=<<<
    *ENDALLOCATION
    Of course, we want to make this dynamic, using the values inputted in the selection screen of the package: time, entity and category.
    So if we start with write the following logic, it does not work anymore:
    *RUNALLOCATION
    *FACTOR=USING/TOTAL
    *DIM ACCOUNT WHAT=ACC_NOT_ASSIGNED; WHERE=BAS(FIN); USING=<<<; TOTAL=<<<
    *DIM TIME WHAT=%TIME_DIM%; WHERE=BAS(Q2009.TOTAL); USING=BAS(Q2008.TOTAL); TOTAL=<<<
    *DIM CATEGORY WHAT=%CATEGORY_DIM%; WHERE=<<<; USING=ACTUAL; TOTAL=<<<
    *ENDALLOCATION
    So, how to use the selection variables in this allocation logic? %TIME%, %CATEGORY% also did not work ...
    regards
    Dries
    solved it ...
    Edited by: Dries Paesmans on Feb 22, 2009 8:31 PM

    Hi Dries,
    Looks like you solved this, but if I can just add a small point -- when you use syntax like this:
    *DIM ACCOUNT WHAT=ACC_NOT_ASSIGNED; WHERE=BAS(FIN);
    *DIM TIME WHAT=Y2009.TOTAL; WHERE=BAS(Q2009.TOTAL);
    each time the logic runs, it will scan through the dimension from the FIN and Q2009.TOTAL members, one level at a time, until it reaches the base members (where calc = 'n'). This may happen very quickly, if the dimension has very few levels, but could take a bit of extra time if it's a particularly deep dimension. (By which I mean many levels of hierarchy -- not some 1970's Pink Floyd musical reference.)
    You may speed things up by using a member property instead of the BAS(xyz). Flag all the base members using a specific property value, and that way the logic engine can pick up the complete list of members in the WHERE clause, in a single query.
    *DIM Account What=ACC_NOT_ASSIGNED; Where=[FloydProperty]="DarkSideOfTheMoon"; ...
    This adds some maitenance work in the dimension, which may be problematic if your admins are changing it regularly (and will cause problems if they forget to update this particular property).
    I can't predict how much time this will save you (maybe not much at all), but anyway I figure you'd want to know exactly what work you're asking the system to perform.
    Regards,
    Tim

  • My MacBook Air does not have an optical drive.  I have a program (Megastar V) which is installed using a CD.  Is there a way to use the optical drive on my PC laptop to install this program on my MacBook Air?

    MacBook Air does not have an optical drive.  There is a program I wish to install on my Air which is an astronomy application called Megastar V.  Installation requires the use of a CD.  Is there a way to use the optical drive on my PC (toshiba laptop using Windows 7) to install this program onto my Air?
    With gratitude,
    Otto

    Thank you for explaining to me how to do this.  I will try it tomorrow and let all of you know how it goes.
    Otto

  • Using the optical drive on a PC

    Does anyone did or know how to install the DVD to CD software on a PC?
    I tried using the 2 DVD that come with the MBA and the PC doesn't find "anything that it can use".
    I asked a Genius at an Apple store, and he said that the software required comes bundled with the external USB SuperDrive, something that doesn't make any sense, because if I buy the external SuperDrive I won't need the optical drive of the PC anymore!!!!
    Any idea where to look for it?
    Thanks
    Pedro

    With another Mac there's no problem, the installation is on Disc #1.
    According to Apple, one can use either another Apple computer or a PC to install via Remote Disc.
    What I'm looking for is where is the DVD to CD software that has to be installed on a PC so one can use the PC optical drive to read/transfer information to the MBA via wireless.
    Pedro

Maybe you are looking for