How to use the same email address for outgoing email on two iPads?

How to use the same email address for outgoing email on two iPads?.   My wife and I both use the same email address.  We receive the same incoming email on both iPads but are unable to send email from my wife's iPad.  She is using an iPad 2 and is usng IOS 6.0.1

Hi Creaturekeeper,
If you've added the account into the iPad and you are unable to send email from it, then please follow the troubleshooting in the article below.
Get help with Mail on iPhone, iPad, and iPod touch - Apple Support
Take care,
Alex H.

Similar Messages

  • How to use the same POWL query for multiple users

    Hello,
    I have defined a POWL query which executes properly. But if I map the same POWL query to 2 portal users and the 2 portal users try to access the same page simultaneously then it gives an error message to one of the users that
    "Query 'ABC' is already open in another session."
    where 'ABC' is the query name.
    Can you please tell me how to use the same POWL query for multiple users ?
    A fast reply would be highly appreciated.
    Thanks and Regards,
    Sandhya

    Batch processing usually involves using actions you have recorded.  In Action you can insert Path that can be used during processing documents.  Path have some size so you may want to only process document that have the same size.  Look in the Actions Palette fly-out menu for insert path.  It inserts|records the current document work path into the action being worked on and when the action is played it inserts the path into the document as the current work path..

  • How to use the same services-config for the local and remote servers.

    My flex project works fine using the below but when I upload my flash file to the server I doesn't work, all the relative paths and files are the same execpt the remote one is a linux server.
    <?xml version="1.0" encoding="UTF-8"?>
    <services-config>
        <services>
            <service id="amfphp-flashremoting-service"
                class="flex.messaging.services.RemotingService"
                messageTypes="flex.messaging.messages.RemotingMessage">
                <destination id="amfphp">
                    <channels>
                        <channel ref="my-amfphp"/>
                    </channels>
                    <properties>
                        <source>*</source>
                    </properties>
                </destination>
            </service>
        </services>
        <channels>
        <channel-definition id="my-amfphp" class="mx.messaging.channels.AMFChannel">
            <endpoint uri="http://localhost/domainn.org/amfphp/gateway.php" class="flex.messaging.endpoints.AMFEndpoint"/>
        </channel-definition>
        </channels>
    </services-config>
    I think the problem  is the line
            <endpoint uri="http://localhost/domainn.org/amfphp/gateway.php" class="flex.messaging.endpoints.AMFEndpoint"/>
    but I'm not sure how to use the same services-config for the local and remote servers.

    paul.williams wrote:
    You are confusing "served from a web-server" with "compiled on a web-server". Served from a web-server means you are downloading a file from the web-server, it does not necessarily mean that the files has been generated / compiled on the server.
    The server.name and server.port tokens are replaced at runtime (ie. on the client when the swf has been downloaded and is running) not compile time (ie. while mxmlc / ant / wet-tier compiler is running). You do not need to compile on the server to take advantage of this.
    Hi Paul,
    In Flex, there is feature that lets developer to put all service-config.xml file configuration information into swf file. with
    -services=path/to/services-config.xml
    IF
    services-config.xml
    have tokens in it and user have not specified additional
    -context-root
    and this swf file is not served from web-app-server (like tomcat for example) than it will not work,
    Flash player have no possible way to replace token values of service-config.xml file durring runtime if that service-config.xml file have been baked into swf file during compilation,
    for example during development you can launch your swf file from your browser with file// protocol and still be able to access blazeDS services if
    -services=path/to/services-config.xml
    have been specified durring compilation.
    I dont know any better way to exmplain this, but in summary there is two places that you can tell swf  about service confogiration,
    1) pass -services=path/to/services-config.xml  parameter to compiler this way you tell swf file up front about all that good stuff,
    or 2) you put that file on the webserver( in this case, yes you should have replacement tokens in that file) and they will be repaced at runtime .

  • How to use the same credit card for more than one customer master

    Hi,
    this is a question for consultants at least a little familiar with SAP business partner, Customer-vendor-intergration cvi, contract accounting:
    My customer wants to store the same credit card with more than one customer. Arguments are that family members or partners may mutually agree to use the same credit card for their distinct purchases.
    I never tried with amazon or the likes but I know that SAP validates the uniqueness of credit cards.
    I found 6 code line where the message (V/)005 "Payment card &1 &2 is already assigned to customer &3" prohibits duplicate assignment.
    Even if I create a couple of enhancements to suppress the error, I don't know how the system will work.
    The customer does not like the idea of using alternative payer.
    Did you ever face the same problem and how did you solve it?
    Much Thanks in advance
    Best regards
    Clemens

    thanks

  • SSL: How to use the same key pair for ABAP & JAVA?

    Hello,
    I want to setup an XI (3.0 on Netweaver04)installation in the way, that ABAP AS and JAVA AS use the same key pair for SSL. My problem is to define the same private key on ABAP and JAVA. With the JAVA Administrator I am able to define or import a private key. But I could not find a possibility in ABAP to manage private keys in order to use the same on as in JAVA. What is the procedure for this?
    Thanks and Regards,
    Frank Tottleben

    Hello,
    I want to setup an XI (3.0 on Netweaver04)installation in the way, that ABAP AS and JAVA AS use the same key pair for SSL. My problem is to define the same private key on ABAP and JAVA. With the JAVA Administrator I am able to define or import a private key. But I could not find a possibility in ABAP to manage private keys in order to use the same on as in JAVA. What is the procedure for this?
    Thanks and Regards,
    Frank Tottleben

  • HT1222 Can you use the same authorization code for QT Pro on two computers? Or do you have to buy a code for each computer

    I have two computers a laptop and my Video Editing computer can I use the same activation code on both?

    An Apple ID is a user name you use for everything you do with Apple. Creating an account for an Apple service, such as the iTunes Store or the App Store, creates an Apple ID. Apple ID allows you to access other Apple services.   So you can use the same Apple ID for up to 10 Macs associated with it.
    To create an Apple ID you need to enter  your full name and your primary email address as your Apple ID. This will be used as the contact email address for your account.

  • We have 2 iphones 4 and one ipod touch and they all use the same apple address for purchases.  How do we stop getting each others texts?

    We are recieveing each others texts, it has only happened since we upgrated to iOS6.  We only get each others iMessages.

    You have two issues: 1. iPad is designed for single person use, not multiple users like a computer is, 2. Everyone trying to use this "single person" device uses the same Apple ID. As far as iMessage is concerned, this is the same person...how would it know differently?
    There is no solution to fix this. Even if everyone got their own Apple ID's, you're still trying to use a device, designed to be used by a single user, with multiple users. It simple is not gonna work, and if you manage to get it to work, it won't work very well.

  • Setting up a different email address for outgoing emails from Iphone

    I receive all my incoming emails to my iPhone through my @me.com account (mobileme).  This way I can have all my other email accounts set up to automatically send an email to my mobile me account which in turn gets pushed to my iPhone.  But I want to be able to respond to any email using a differnet email address so subsequent replies from third parties to my emails will not go directly to my mobile me account. (I just want to use it as push server for emails to other accounts).  So what I did is to have my incoming email server be a mobile me account.  On my iPhone I turned off the primary server "smtp.me.com" as the outgoing server and turned on an "other" outgoing server.  But here is the problem and the question.  I can successfuly send out replies using the "other" server but the address of sender on the email is still as being from my @me.com.  So how do I have a different email address for the outgoing emails even though I can use that different email address outgoing server.  Hope this explanation is not too difficult.

    Hi Steve
    is Mail - Preferences - Composing - Send new messages from...
    set to the required account ?

  • How to use the same variable value for data entry and the planning sequence

    Hi,
    the scenario is the following:
    Using the WAD template a user enters cost center plan data. The cost center is selected by the chosen value for the variable "V1".
    Afterwards he shall push a button which starts a planning sequence (including saving the data and further functions). This planning sequence uses a filter that also contains the variable "V1".
    What or where has it to be defined that the planning sequence uses automatically the same value for the variable "V1" as selected for the data entry?

    You have to define in the planning function. The planning sequence is only a sequence and it read the planning functions underneath it.
    Ravi Thothadri

  • How to use the same UI Project for differents HumanTask's in BPM 11gR1

    When I define a User interaction activity in my Oracle BPM 11gR1 Process and associate a Human Task to it. It generates a new project to hold all my forms. Anyone knows if it's possible to use this same project for different Human Task's ?

    After you generate the UI project for your first human task, you can right click on the project in JDeveloper and select "New", click on the "All Technologies Tab", then "JSF" -> "ADF Task Flow Based on Human Task". Then browse to the .task file from your BPMN/composite project.

  • How to use the same Windows-Profile for over 700 Users?

    Dear admins,
    i´d like to use one (1!) shared windows profile to serv over 700 user-accounts in our school. But there is a little complication in the WGM.
    I just tried to check all users and entered the path of the shared profile right in the windows tab.
    For example \\Server\Profiles\oneforallprofile
    Unfortunately the WGM put the user´s shortname behind this path.
    For example: \\Server\Profiles\oneforallprofile\mistersmith
    or \\Server\Profiles\oneforallprofile\sallymiller and so on.
    By changing this preference one by one it works, but of course i need a solution to do that for all users.
    Does anyone know how to set one Profile for all students?
    Thanks for your help!
    Rolf
    XServe G5   Mac OS X (10.4.5)   Educational System Administrator

    Hello Prasad,
    Most likely the user km_admin still has system principal roles assigned, even though you removed the Super Admin role, you should check that this user doesn't have any other admin roles, otherwise it will be considered a System Principal user and will therefore still have access to all content. For more information see http://help.sap.com/saphelp_nw70/helpdata/en/19/56f28fbd4e11d5993b00508b6b8b11/frameset.htm
    Try creating a new user with just read access to the content and you should see that it will not be able to make any changes etc.
    Regards,
    Lorcan.

  • I can not use the same ip address for three NDGs ACS.!

    Hello. Install ACS 4.2 Build 124 Patch 13, I created three NDGs, My server has the IP 192.168.1.10, adding the same three NDGs server gives me this error:
    An overlapping IP range 192.168.1.10 conflicts have been detected with ACS entry of 192.168.1.10.
    besides, if you add a server with an IP that does not exist and then remove it, do not get such option to remove.
    suggestions on this?

    Hi Kevin,
    Please change the ip of the server to any random ip like 1.1.1.1 and submit the cahnges. After that go to start > run > services.msc and restart the Csadmin services. This would required re-login to ACS GUI.
    Go to the same server > edit the changes and you would see delete + apply option.
    NOTE: The above steps are only applicable for ACS windows.
    HTH
    JK
    Plz rate helpful posts-

  • HT1277 How do you set a default "from" email address for outgoing emails?

    I have three email accounts.  Apple email keeps defaulting to the .me account.  Would like to make my Yahoo the default 'from" account.

    Hi Steve
    is Mail - Preferences - Composing - Send new messages from...
    set to the required account ?

  • Setup of different email address for outgoing emails

    How can I set up a different outgoing email address to respond to incoming emails ...I have figured out to have a different outgoing server but it still has my address from the incoming emails

    Hi Steve
    is Mail - Preferences - Composing - Send new messages from...
    set to the required account ?

  • My macbook wont allow me to use the same hotmail address as i used on my other computers. How can I keep the same email and log into it on a macbook?

    my macbook wont allow me to use the same hotmail address as i used on my other computers. How can I keep the same email and log into it on a macbook?

    That indicates a hardware failure. Read here:
    http://support.apple.com/kb/ts1559
    If nothing works, you most likely have a hardware failure. Make an appointment at an Apple store to confirm.

Maybe you are looking for

  • HOW to read file using ftp???

    Hi to all, I have problem with reading file using ftp connection, i want to read only 1024 bytes for one time, and i have next code wich read this: byte buffer[] = new byte[1024]; while( (readCount = input.read(buffer)) > 0) { bos.write(buffer, 0, re

  • Making sound when shutting down

    I noticed that as of recently, my MBP has been making the "Basso" sound right before my computer shuts down. I don't know when or why OS X would play the "Basso" sound but it kind of sounds like a bad warning. Any ideas on this?

  • What is the procedure to create entry in NAST table for particualr document

    Hello ABAP GURUS, I need to know how to create objectkeys in NAST table for particualar document number. My requirement is i need to check my smartform output for Goods Receipt.IN nast table,i dont have any entries for Goods Receipt.So i need to crea

  • Dreamweaver to be CSS-based by default?

    Does anyone know if Adobe plans on having a new version of Dreamweaver to be CSS based by default. I heard the new Web Expression by Microsoft is to be totally CSS design.

  • Hana is a Database or Memory and why BW on Hana?

    Dear Experts, I have read few documents regarding Hana and I am confused? Following is my understanding. Correct me if I am wrong in my understanding? 1. I believe Hana is a database(a different kind of data base with Software and hardware) which sto