How to use the same variable value for data entry and the planning sequence

Hi,
the scenario is the following:
Using the WAD template a user enters cost center plan data. The cost center is selected by the chosen value for the variable "V1".
Afterwards he shall push a button which starts a planning sequence (including saving the data and further functions). This planning sequence uses a filter that also contains the variable "V1".
What or where has it to be defined that the planning sequence uses automatically the same value for the variable "V1" as selected for the data entry?

You have to define in the planning function. The planning sequence is only a sequence and it read the planning functions underneath it.
Ravi Thothadri

Similar Messages

HT204053 i used the same apple id for my iphone and my husbands now all our contacts and such are on both phones how do i fix this. I dont need his contacts on my phone and the other way also. Should i create a different icloud account for his phone?

I used the same apple id for my iphone and my husbands now all our contacts and such are together. How do I undo this? Do i create him a different icloud account?

Yes, start with deleting your account on his device:
(Settings > iCloud or Settings > Mail, Contacts, Calendar > Your Account)
In the next step, create a new account on his device:
(Settings > iCloud or Settings > Mail, Contacts, Calendar > Your Account)

HT204053 for ipad2 Using the same Apple ID for Store purchases and iCloud (recommended) yes/

hi i am shahram i have ipad2 for ipad 2 using the same apple iD for store purchases and iCloud(recommended) yes or no?

That's what Apple recommend, it's also how I have mine set up. Although it isn't much of a problem to use a different account (ID) for each service.

Hi i have the same apple id for my iPad and my mac. my iPhone has a different one. My i cloud on my mac seems to be the iCloud on my iPad, if that makes sense so its not sending my photos from my mac to the cloud. how do i change it to upload mac?

hi i have the same apple id for my iPad and my mac. my iPhone has a different one. My i cloud on my mac seems to be the iCloud on my iPad, if that makes sense so its not sending my photos from my mac to the cloud. how do i change it to upload mac pictures instead? thanks

Did you go into Settings > Store and then tap your old ID, sign out and then enter your new ID?

HT4759 can you use the same apple id for two phones on the cloud?

can you use the same apple id for two phones on the same verizon account and if so can you keep there contacts etc. separate?

If you want to keep your contacts and other data you sync with iCloud separate, you'll have to create separate iCloud accounts, which will require different IDs. If you share the same iCloud account/ID on multiple devices, the synced data will be merged and will appear on all devices syncing with the shared account.
You can still share the same ID for iTunes; it doesn't have to be the same as the one used for iCloud.

If I use the same iCloud account for my ipad and iPhone, will changes I make on one change on the other as well? I'm not sure of the advantage of using teh same iCloud for both devices.

If I use the same iCloud account for my ipad and iPhone, will changes I make on one change on the other as well? I'm not sure of the advantage of using teh same iCloud for both devices.

No, it only mirrors changes to synced data. This includes mail, contacts, calendars, reminders, safari bookmarks, notes, iWork documents and data, and photo stream photos (assuming you choose to sync all this data). Changes to iTunes data such as music, apps, podcasts, etc., are not synced using iCloud. In your example, if you delete an app from one device it will remain on the other until deleted there too.

How to use Replacement Path Variables to perform Date Calculations

Hi Experts,
Can anyone make me clear about:How to use Replacement Path Variables to perform Date Calculations???????
Thankyou in advance..
shankar

In left panel select the time Dimension
Then hit new variable in that
give the Name and Description for the Variable
In processing by hit Replacement Path
In reference characterisitcs use Calendar Day...
As ur intention is to use it for Date
Then in adjacent tab use
Replace variable with Query / Variable
Then u can use Offset length and offset start for controoling the display of your variable.
Use as single, multiple single, interval, selection option as uwish
HIt okey
and you are good to go

I am using a Palm Pilot still for several purposes, and the desktop version can run om my Mac OS X 10.6.8, but I cannot find a version that runs on OS X Mavericks, which prevents me from upgrading as my PalmPilot is storage for vital info.

I am using a Palm Pilot still for several purposes, and the desktop version can run om my Mac OS X 10.6.8, but I cannot find a version thjat runs on OS X Mavericks, which prevents me from upgrading as my PalmPilot is storage for vital info. Any solution?

Thank for for your suggestions. Unfortunately they are of little help. I am running on Snow Leopard and the PalmDesktop works fine. However, I do not want to quit my PalmTungsten unit as it is my backup for all my important access information. If it cannot run on Mavericks and no other solution is at hand, I simply will not update my OS X, but work on my Snow Leopard as it is.
I do not know how on earth I can migrate the information from my Palm into another system, and then quit the PalmPilot. If you have any intelligent solutions to this I would appreciate an input. A manual copy and paste solution is not acceptable. I may however run it on Windows via Parallel Desktop, but it is a lousy solution, and demonstrates (again) the weakness of Apple's OS and lack of compatibility. I am not impressed by the OS X performance.
Thank your for your attention.

We have 2 versions of Portuguese in our application. The problem is only for Brazilian Portuguese and the other one is working just fine. Locale for portugese-brazil (pt-BR) is not working

We have 2 versions of Portuguese in our application. The problem is only for Brazilian Portuguese and the other one is working just fine.
Locale for portugese-brazil (pt-BR) is not working.

No. Something else is going on.
Your son may be hogging all the bandwidth but your wireless network should never simply disappear. Moreover, if your son isn't doing anything the available bandwidth for other devices should remain unaffected.
I suspect that something is miswired, and from what you describe I suspect that link is between the Extreme and the "other computer".
The way to accomplish what you propose is
Modem > Ethernet cable to Extreme's WAN port
Extreme's LAN ports > wired Ethernet devices.
There should be nothing but an Ethernet cable linking an Extreme LAN port and any other wired device. If you run out of available LAN ports on the Extreme, you need to by an "Ethernet switch" - they are not expensive, but don't call it a "splitter" or you will only confuse yourself. The switch would be connected to one of the Extreme's LAN ports, and you would connect additional devices to it. You can also use one of your Expresses for that purpose, assuming it is the current generation model with two Ethernet ports.

Live meeting - After click Join the Meeting, it prompted for MeetingID, Entry and Location are blank, need to key in information manually

Live meeting issue:
After click Join the Meeting, it prompted for MeetingID, Entry and Location are blank, need to key in information manually
1. It seems OK on Live meeting client settings.
2. Then uninstall and reinstall live meeting client and addons. live meeting version now is 8.0.6362.41
3.can schedule live meeting success.
but issue persists.

Live meeting issue:
After click Join the Meeting, it prompted for MeetingID, Entry and Location are blank, need to key in information manually
1. It seems OK on Live meeting client settings.
2. Then uninstall and reinstall live meeting client and addons. live meeting version now is 8.0.6362.41
3.can schedule live meeting success.
but issue persists.

How to retain the presentation variable values for Dashboard Prompt

I've a dashboard prompt with date and two other drop down field, with default value as yesterday's date set for date and All Values set for other two drop down list. Presentation Variables are D1, P1 and P2 respectivilly
I'm using GO URL from "Report A" and passing presentation variable to navigate to other report (Report B) that works fine. eg:
'<a href = saw.dll?GO&path=/shared/Reports/ABC/ReportB&Action=Navigate&p0=1&p1=eq&p2="-%20Time"."Next%20Day"&p3=@{d1}>Test</a>'
From Report B I'm using Dashoard URL to go back to Previous Report like:
<div class="XUIPromptEntry minibuttonOn">
Return to Previous Screen</div>
This also works fine.
My problem is that, when users selects different values in the Main dashboard prompt for date and other other two drop down and navigates to other report (Report B), and from Report B, when user returns to previous screen (Main Dashboard), Prompts values gets refreshed to original default values.
Is there any way to retain the values of presentation variable in dashboard Prompt when I return to main dashboard from Report B?
I'd appreciate your help.
Thanks

Change your dashboard url include the column and column value for the date column sample shown below,
[a href=saw.dll?Dashboard&PortalPath=/shared/sample/_portal&page=pagename&Action=Navigate&col1=Dim.Date&val1=@1>Return to Previous Screen[/a>
In my second report Date is the first column so I referenced it's value as @1 in the dashboard URL
note: replace [ with <
Thanks,
Vino

Use the same code module for several steps in the sequence

Hello All,
I have been trying to set up a sequence that uses the same code module for all of the steps in the sequence, but am having trouble referring back to it when I need to send it commands. I have gotten as far as calling the VI in a new thread so that it can be run asynchronously. I can run the simple sequence and it will indeed open the VI, and move on to the next step. When I close the VI manually from the front panel, the sequence in TestStand completes, as expected. So it appears that I have that much working.
My question is how to call the separate thread from the main sequence or other sub sequences when I need to edit the parameters. If I insert an Action step, I am required to select a VI file, but from what I can tell, it opens a different instance of the file, and does not provide an interface with the other instance running asycronously. My next guess was to use a Statement step, but I was not able to figure out how to configure the lookup string to call the VI parameters. Beyond that, I'm not sure how to proceed. Please advise.
My intention is to start the code module VI (asynchronously), run several different subsequences within the main sequence that call that same VI and edit it's parameters, close everything and report on the results. If I am misunderstanding how TestStand is supposed to work, please let me know.
Thanks,
GSinMN
Solved!
Go to Solution.

What I do is use a Queue to send data to the asynchronous VI. So it can run and do whatever, but also recieve the commands from the queue. I use an Action Engine that holds the queue reference and sends the commands. So you really just have to call the Action Engine from your sequences.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

I have been using the same debit card for iTunes forever and now it's saying its declined but it hasn't expired yet

I Have always used the same debit card for iTunes and then the other day I tried to download an app and it said that I needed to update payment methods so I put in all of my details and it said that my card had been declined. I have no idea why and I don't know how to fix this. Please help

Is the address on your iTunes account exactly the same (format and spacing etc) as on your credit card bill : http://support.apple.com/kb/TS1646 ? If it is then you could try what it says at the bottom of that page :
If the issue persists, contact your credit card company and verify that they and any company they use to process credit card authorisations have the correct information on file.
And/or try contacting iTunes support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

Can I use the same apple ID for my personal and work phones?

I have a personal iPhone (AT&T) and am getting one issued through work (Verizon). Am I able to use the same Apple ID for both phones?

In theory, yes. You had best ask your IT department, though... or whoever is issuing the phone to you. They may have policies as to what is and is not allowed to be done on company owned phones.

Can i use the same apple id for my irish and english iphone?

I currently use two different Apple IDs on my Irish and English Iphones. Can I use the same Apple ID for both to make it easier to syn onto my macbook?

Yes, you can use your Apple ID with any Apple product or service worldwide, no matter the language or country, but your account can only be in one iTunes Store country at a time.
Using your Apple ID: http://support.apple.com/kb/ht4895
Changing the country of the iTunes Store: http://support.apple.com/kb/ht6119

How to use the same variable value for data entry and the planning sequence

Similar Messages

Maybe you are looking for