How to use the songs in iPhone 6 for ringtone

Is it possible to use the songs in the phone for ringtone, how to set?

I got a iphone 6 yesterday and when I did my back up on iTunes my ring tones would not go back into my device I tried a few times and maybe is one of those bugs right now the iTunes store sell a lot of great music apps

Similar Messages

  • How to use the same email address for outgoing email on two iPads?

    How to use the same email address for outgoing email on two iPads?.   My wife and I both use the same email address.  We receive the same incoming email on both iPads but are unable to send email from my wife's iPad.  She is using an iPad 2 and is usng IOS 6.0.1

    Hi Creaturekeeper,
    If you've added the account into the iPad and you are unable to send email from it, then please follow the troubleshooting in the article below.
    Get help with Mail on iPhone, iPad, and iPod touch - Apple Support
    Take care,
    Alex H.

  • How to use the same POWL query for multiple users

    Hello,
    I have defined a POWL query which executes properly. But if I map the same POWL query to 2 portal users and the 2 portal users try to access the same page simultaneously then it gives an error message to one of the users that
    "Query 'ABC' is already open in another session."
    where 'ABC' is the query name.
    Can you please tell me how to use the same POWL query for multiple users ?
    A fast reply would be highly appreciated.
    Thanks and Regards,
    Sandhya

    Batch processing usually involves using actions you have recorded.  In Action you can insert Path that can be used during processing documents.  Path have some size so you may want to only process document that have the same size.  Look in the Actions Palette fly-out menu for insert path.  It inserts|records the current document work path into the action being worked on and when the action is played it inserts the path into the document as the current work path..

  • How to use the same services-config for the local and remote servers.

    My flex project works fine using the below but when I upload my flash file to the server I doesn't work, all the relative paths and files are the same execpt the remote one is a linux server.
    <?xml version="1.0" encoding="UTF-8"?>
    <services-config>
        <services>
            <service id="amfphp-flashremoting-service"
                class="flex.messaging.services.RemotingService"
                messageTypes="flex.messaging.messages.RemotingMessage">
                <destination id="amfphp">
                    <channels>
                        <channel ref="my-amfphp"/>
                    </channels>
                    <properties>
                        <source>*</source>
                    </properties>
                </destination>
            </service>
        </services>
        <channels>
        <channel-definition id="my-amfphp" class="mx.messaging.channels.AMFChannel">
            <endpoint uri="http://localhost/domainn.org/amfphp/gateway.php" class="flex.messaging.endpoints.AMFEndpoint"/>
        </channel-definition>
        </channels>
    </services-config>
    I think the problem  is the line
            <endpoint uri="http://localhost/domainn.org/amfphp/gateway.php" class="flex.messaging.endpoints.AMFEndpoint"/>
    but I'm not sure how to use the same services-config for the local and remote servers.

    paul.williams wrote:
    You are confusing "served from a web-server" with "compiled on a web-server". Served from a web-server means you are downloading a file from the web-server, it does not necessarily mean that the files has been generated / compiled on the server.
    The server.name and server.port tokens are replaced at runtime (ie. on the client when the swf has been downloaded and is running) not compile time (ie. while mxmlc / ant / wet-tier compiler is running). You do not need to compile on the server to take advantage of this.
    Hi Paul,
    In Flex, there is feature that lets developer to put all service-config.xml file configuration information into swf file. with
    -services=path/to/services-config.xml
    IF
    services-config.xml
    have tokens in it and user have not specified additional
    -context-root
    and this swf file is not served from web-app-server (like tomcat for example) than it will not work,
    Flash player have no possible way to replace token values of service-config.xml file durring runtime if that service-config.xml file have been baked into swf file during compilation,
    for example during development you can launch your swf file from your browser with file// protocol and still be able to access blazeDS services if
    -services=path/to/services-config.xml
    have been specified durring compilation.
    I dont know any better way to exmplain this, but in summary there is two places that you can tell swf  about service confogiration,
    1) pass -services=path/to/services-config.xml  parameter to compiler this way you tell swf file up front about all that good stuff,
    or 2) you put that file on the webserver( in this case, yes you should have replacement tokens in that file) and they will be repaced at runtime .

  • How to use the find my iphone feature?

    I lost my Ipod Touch 4 at school but i did not have the find my iphone feature turned on so I couldn't track it. Is it true that you can use the find my iphone app on another person's apple device to track yours? How?

    No, you have to either have the Apple FindMuPhone/iPod feature turned on or installed a third-party app. The iPod musy also bo connected to the internet.
    - If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up.
    - You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
    - If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
    - Change the passwords for all accounts used on the iPod and report to police
    - There is no way to prevent someone from restoring the iPod (it erases it) using it.
    - Apple will do nothing without a court order                         
    Reporting a lost or stolen Apple product                              
    - iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

  • How to use the same credit card for more than one customer master

    Hi,
    this is a question for consultants at least a little familiar with SAP business partner, Customer-vendor-intergration cvi, contract accounting:
    My customer wants to store the same credit card with more than one customer. Arguments are that family members or partners may mutually agree to use the same credit card for their distinct purchases.
    I never tried with amazon or the likes but I know that SAP validates the uniqueness of credit cards.
    I found 6 code line where the message (V/)005 "Payment card &1 &2 is already assigned to customer &3" prohibits duplicate assignment.
    Even if I create a couple of enhancements to suppress the error, I don't know how the system will work.
    The customer does not like the idea of using alternative payer.
    Did you ever face the same problem and how did you solve it?
    Much Thanks in advance
    Best regards
    Clemens

    thanks

  • How to use the table maintenance events for validating the input entries..?

    Hi,
    I have created a Z table with 6 fields in which all are KEY fields. All are of CHAR type. I have created the Table Maintenance Generator for the same. While maintaining the entries in the table, even though I maintain a blank entry for a field it is saving the entry. But, I don't want that way. All the fields are mandatory in my table. One should enter all the fields. Otherwise it should not allow to save the entry. So, I think it can be done using the Table Maintenance Events. can someone tell me how to use the Table Maintenance Events. and which event to use for my reuqirement and what is the logic to be written.
    Or Is there any other way to solve my problem.
    Please share your inputs. Thanks in advance.
    Best regards,
    paddu.

    In the table maintenance generator, Environment --> Modifications --> Events then a screen will be appear here,we need to create the Events.In the EVENTS screen, press new Entries, there give 01(Before Saving the Data in the Database) and give a name(This will become a PERFORM), then click the Editor pushbutton, this will be there at the right side of the entry, then a popup will be appear, you can create an include program, there inside of the include program write ur code.
    Here is documentation for Event 01(Before Saving the Data in the Database )
    Event 01: Before Saving the Data in the Database
    Use
    This event occurs before new, changed or deleted entries are written to the database. Other activities can be performed, for example:
    hidden entry processing
    fill hidden fields
    flag data to be written to hidden tables after the database change.
    To have the changes saved by the central maintenance dialog routines, SY-SUBRC must be set to 0 at the end of the routine.
    Realization
    This event has no standard routine. The following global data is available for the realization of the user routine:
    internal table TOTAL
    field symbols
    field symbols <ACTION> and <ACTION_TEXT>
    <STATUS>-UPD_FLAG
    If internal table data are to be changed before saving, t he changes should be made in both the internal table TOTAL and in the internal table EXTRACT.
    FORM abc.
    DATA: F_INDEX LIKE SY-TABIX. "Index to note the lines found
    LOOP AT TOTAL.
    IF <ACTION> = desired constant.
    READ TABLE EXTRACT WITH KEY <vim_xtotal_key>.
    IF SY-SUBRC EQ 0.
    F_INDEX = SY-TABIX.
    ELSE.
    CLEAR F_INDX.
    ENDIF.
    (make desired changes to the line TOTAL)
    MODIFY TOTAL.
    CHECK F_INDX GT 0.
    EXTRACT = TOTAL.
    MODIFY EXTRACT INDEX F_INDX.
    ENDIF.
    ENDLOOP.
    SY-SUBRC = 0.
    ENDFORM.
    Regards,
    Joy.

  • How to use the field of 'FM for Determining Address' in report RSWUWFML2?

    Dear gurus,
    In the selection screen of report RSWUWFML2, there is a field named 'FM for Determining Address' . How to use it? Is it for sending e-mail to specific e-mail addresses?
    Regards
    David

    I will test soon. Thanks to all involved.

  • HT1725 I purchased a album of various artist, however some of the songs did not download, an error message saying something about not having proper information to download??? any thoughts on how I get the songs I paid for but did not download?

    After purchasing a album of TV Theme songs, during the download some of the themes would not load, an error message came up saying to the effect I did not have the correct info to download.  Does anyone know about this issue & any thoughts on how I aquire the themes I paid for?  The themes that did not load still show up in the music list but are greyed out & have an "!" exclamation mark beside the number of the item in the list.

    Assuming you are in a region where you are allowed to redownload your past music purchases, delete the broken tracks from your iTunes library, close and then reopen iTunes, go to the iTunes Store home page, click the Purchased link from the Quick Links section in the right-hand column, then select Music and Not on this computer. You should find download links for your tracks there.
    While downloading select Downloads in the left-hand column and make sure Allow Simultaneous Downloads is unticked.
    If the problem persists, or that facility is not yet available in your region, contact the iTunes Store support staff through the report a problem links in your account history, or via Contact Support.
    See also: HT2519 - Downloading past purchases from the App Store, iBookstore, and iTunes Store
    tt2

  • SSL: How to use the same key pair for ABAP & JAVA?

    Hello,
    I want to setup an XI (3.0 on Netweaver04)installation in the way, that ABAP AS and JAVA AS use the same key pair for SSL. My problem is to define the same private key on ABAP and JAVA. With the JAVA Administrator I am able to define or import a private key. But I could not find a possibility in ABAP to manage private keys in order to use the same on as in JAVA. What is the procedure for this?
    Thanks and Regards,
    Frank Tottleben

    Hello,
    I want to setup an XI (3.0 on Netweaver04)installation in the way, that ABAP AS and JAVA AS use the same key pair for SSL. My problem is to define the same private key on ABAP and JAVA. With the JAVA Administrator I am able to define or import a private key. But I could not find a possibility in ABAP to manage private keys in order to use the same on as in JAVA. What is the procedure for this?
    Thanks and Regards,
    Frank Tottleben

  • How to use the functionality of Simulation for the Transaction MIRO

    Hi Group,
    I have a requirement to call SAP from MS Excel and check for the SImulation option as under:
    The Excel will pass the values of Invoice Number, Posting date, PO number, PO Item number, Company code and etc., through the call of BAPI   -   'BAPI_INCOMINGINVOICE_CREATE'  in order to create Invoice in the SAP system.
    But the above BAPI is creating the Invoices in SAP system. Rather, I need to just check(thru SIMULATION) the records and come back to MS Excel with the MIRO numbers that will be created and the errror messages that will be returned back.
    In summary, I have to add two Buttons as:
       POST : this has to create MIRO(invoice Numbers) in the SAP System(populating the Success/Error Messages by calling
                   the above BAPI   -  This functionality is working fine now
       SIMULATE: this has to do  same functionality of "POST" option but should not create MIROs in the SAP system
                          Currently I am not able to achieve this as the above BAPI is creating MIROs in SAP.
    Kindly provide your inputs on how to go about incorporating the above SIMULATION functionality, by giving some simulation BAPIs that can be used for my functionality.
    Thanks for your help in advance.
    Regards,
    Vishnu.

    Hi Group,
    In continuation to my previous posting, I would like to give more inputs as under:
    when I was using the BAPI - BAPI_INCOMINGINVOICE_CREATE (unless I commit the transaction), MIRO would not be created in the system.
    Now, when I run the BAPI again with a different set of data, the Invoice Number is getting incremented by one.... this I dont need, if the Invoice is not committed and if I run the next time, I need to get the same Invoice Number....
    How can I achieve this task?
    Kindly let me know your inputs on this.
    Regards,
    Vishnu.

  • How to use the same Windows-Profile for over 700 Users?

    Dear admins,
    i´d like to use one (1!) shared windows profile to serv over 700 user-accounts in our school. But there is a little complication in the WGM.
    I just tried to check all users and entered the path of the shared profile right in the windows tab.
    For example \\Server\Profiles\oneforallprofile
    Unfortunately the WGM put the user´s shortname behind this path.
    For example: \\Server\Profiles\oneforallprofile\mistersmith
    or \\Server\Profiles\oneforallprofile\sallymiller and so on.
    By changing this preference one by one it works, but of course i need a solution to do that for all users.
    Does anyone know how to set one Profile for all students?
    Thanks for your help!
    Rolf
    XServe G5   Mac OS X (10.4.5)   Educational System Administrator

    Hello Prasad,
    Most likely the user km_admin still has system principal roles assigned, even though you removed the Super Admin role, you should check that this user doesn't have any other admin roles, otherwise it will be considered a System Principal user and will therefore still have access to all content. For more information see http://help.sap.com/saphelp_nw70/helpdata/en/19/56f28fbd4e11d5993b00508b6b8b11/frameset.htm
    Try creating a new user with just read access to the content and you should see that it will not be able to make any changes etc.
    Regards,
    Lorcan.

  • How to use the select statement in for loop

    Hi All,
    my question is can we use select statement in for loop like as follows .
    for key in select key from one_table.
    when i am using this am getting an error like Found select invalid i identifier
    how to make use of select statement in for loop
    please suggest me .
    Thanks
    Sree

    SQL>set serveroutput on;
    SQL> DECLARE
         BEGIN
         FOR Cur_Rec IN (SELECT dname FROM dept) LOOP
          DBMS_OUTPUT.PUT_LINE(Cur_Rec.dname);
         END LOOP;
         END;
    SQL>
    ACCOUNTING
    RESEARCH
    SALES
    OPERATIONSAs per your requirement always filter the Query beforehand
    Like
    FOR Cur_Rec IN (SELECT key FROM <table> WHERE key=1) LOOP
    END LOOP;Edited by: Lokanath Giri on १ दिसंबर, २०११ ३:५६ अपराह्न

  • How to use the scene deconstruction option for Avatar

    I am able to access all the iTunes extras feature for Avatar except the Scene Deconstruction feature. Whenever I use any of the 3 options available in scene deconstruction it just opens up a blank grey screen with Final, picture in picture, template and capture text and the pause sign. Nothing shows or plays I have been at it for over 2 days now. Will someone help me or guide me to a video where I can learn how to use this feature?

    Compare is not exposed via any API.

  • I lost my iphone and I don't know how to use the "fined my iphone" app

    Hi, can someone help me how to find my iphone using the app "find my iphone"?

    Hello,
    Do you have connected your iPhone to your iCloud account ?
    If yes, do you have then allowed the localization ?
    If yes, go to www.icloud.com and log in with the same iCloud account you have used on your iPhone and select the "Find my Phone" app.
    Arnaud

Maybe you are looking for