How to use the standrad Refresh button in ooalv Grid?

Hai Experts ,
i write editable oo alv program its works fine. when change the data
then click save button its saved correctly, but the problem is totals of row & column not refresh when i am click the
Refresh button . Please Help how to handle the standard Refresh button in ooalv .
Thanks
Adv....

thank q u for ur reply,
when i edit the data in grid and save the data its saved successful,
but the problem is manually i calculating the totals at the end of the Row as well as at end of the columns,
when i edit the data in Grid that totals are not effected for that im using the Standard Refresh button ,
Plz help me.

Similar Messages

How to use the cases in button action?

Hi Experts,
I want to get a prompt message if the field is empty.I got it but at the same time if the field is filled I want the other action to be performed that is to call a BAPI and give me output.How can I give two events for the same action.
How to use the cases in button action?
So, please guide me.Urgent need
Regards
Nutan

Hi Nutan,
if I understand you, then you have a simple validation. Therefore you can use the validation functionality of VC for your components. An alternative could be by writing a new ABAP RFC function module like:
BAPI Input parameters as input and BAPI output parameters as output and an additional return code or string for a message:
IF I_FIELD IS INITIAL.
E_RETURN_CODE = "THE FIELD IS EMPTY."
ELSE.
CALL FUNCTION <YOUR_BAPI>
<BAPI PARAMETERS>
ENDIF.
I hope that helps.
Best Regards,
Marcel

I used the Firefox Refresh button, but it never finished. When Firefox finally showed up again, it just showed a blank screen, with the Firefox "frame".

Reluctantly tried Firefox Refresh. Step #3 says "3.Firefox will close to refresh itself. When finished, a window will list your imported information. Click Finish and Firefox will open."
I never got that window. Firefox re-opened after about 20 minutes with a blank screen. I waited some more, but nothing. At first it didn't seem to be responding to mouse clicks or keyboard entry, but after a couple more minutes, I was able to click on the menus or Firefox button and get a response.
When I look under Firefox profiles (folder), I see my original profile folder with a dash after default and then a number added at the end (xxxxx.default-zzzzz). It is still my only profile folder. I thought Refresh was supposed to create a new profile folder.
All of my bookmarks are missing.

Hello there,
This may be caused by the large amount of visited sites and as a result this can slow down Firefox
Can you please try to clean your browsing history and cookies by doing the following:
1. Click the menu button, choose "History", and then "Clear Recent History"
2. Select how much history you want to clear ( Everything is recommended)
3. Finally, click the "Clear Now" button.
If none of the above work then I would suggest to reinstall Firefox and see if that solves the issue.
Keep us posted!

How to use the video control buttons on YouTube with voice over

I have a Macbook Pro and since I am totally blind I use the voice over. I am watching YouTube videos but I can't access the buttons at the bottom of the screen. I can't play/pause the videos or use the slider. I ca't use any of those buttons. Is there sometihng I am missing here?

I dont know if you will be able to connect other device like PS3 or Wii.
As far as I know only the Xbox 360 could be connected to a Qosmio and could be used with the Windows MCE.
I presume this is possible due to connection of Microsoft products; MCE and Xbox360
To be honest; why you dont take a look into the user manual if this notebook is new to you?
All details are mentioned in the user manual which is already preinstalled on the notebook.

How to use the reset utility button when the device is not recognized?

like many other shuffle first generation users, after purchasing a second generation ipod and tried using first generation itunes, it wanted me to update software. So I did. Now the computer, a/c adaptors, ihome alarm clock does not recognize my first generation shuffle. The reset utility will not work because it can't find the ipod. And, no it is not Windows because other devices are recognized on the same port but not the ipod. I AM UNABLE TO CHARGE MY IPOD. That is unacceptable. APPLE, figure out how to fix this. It is not fair to pay a $100 for a product and have it work for only as long as a newer product is created! What is everyone supposed to do with these IPODS?

I would agree. I picked up an ipod shuffle bascially
because it's the smallest and lightest player I could
find. I was also replacing a SanDisk device that
worked perfectly for 4 years until it was damaged.
Anyway, I've been screwing around with this 2nd
generation shuffle, which my PC WIL NOT recognize,
nor will iTunes. It's downright sad that the device
depends on iTunes to work in the first place,
particularly because that's a piece of garbage
software to begin with. Every other device
manufacturer in the world seems to be able to figure
out how to build USB devices that are immediately
recognized by XP pro without any screwing around,
software installation or ridiculous blinking lights.
The four year old Sandisk device, for example was a
hassle-free installation with significantly older
software. I don't get this one at all, but it would
be great to see a solution, which are absolutely not
in the suggested '5 Rs'. Incidentally, there
shouldn't be 5 anythings, there should be one
'P'--plug in, like the $20 mp3 players that are
available.
So return it...

I have installed a trial of Adobe illustrator on my macbook pro. I want to trace an image using the custom trace button but can't. Does anyone have any ideas how I could custom trace?

I have installed a trial of Adobe illustrator on my macbook pro. It is the 2014 release of adobe illustrator. I want to trace an image using the custom trace button.
I start a new document. Then I place my scanned pencil/colored pencil drawing, in to the document. I have tried scanning and then placing it as a jpeg, bitmap, and tiff file. I have tried scanning and then placing it, in color and in black and white. The scan mode I use is flatbed. Adobe illustrator allows me to select the default button and one of eleven preset buttons (e.g high fidelity photo), but it does not allow me to click the custom trace button. The custom trace button is grey while all the other buttons are white.
Does anyone have any ideas how I could custom trace?

It seems pointless to adjust it afterwards because it is then only a couple a pencil lines rather then a full drawing. And how do I adjust it afterwards? Would I do this using the different buttons under the window button?

The option to sync apps is no longer available in iTunes, though it used to be. Can anyone tell me how to access the sync apps button please?

Can anyone tell me how to access the sync apps button please? I used to be able to select it but it is no longer visible.

You have to connect and select iPhone in computer iTunes Sidebar.
If you don't see the Sidebar, toggle it on in iTunes menu View > Show Sidebar.
Take a look at this screenshot on updating apps.

When using the up/down buttons in the Inspector, how do I get them to move by .01, instead of default, which is always too much.

When using the up/down buttons in the Inspector, how do I get them to move by .01, instead of default, which is always too much.

Feature unavailable.
Most of the time it's more efficient to type directly the wanted value.
Yvan KOENIG (VALLAURIS, France) mercredi 1 février 2012
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My Box account is : http://www.box.com/s/00qnssoyeq2xvc22ra4k

I shot at a Live performance last weekend by using the 'capture now' button. Now, my FCP is only playing the first 6 frames - how can I access or recover the full hour I shot?

I shot at a Live performance last weekend by using the 'capture now' button. Now, my FCP is only playing the first 6 frames - how can I access or recover the full hour I shot?

FCP X? Then you need to use a different forum...This is the FCP 7 and earlier forum:
https://discussions.apple.com/community/professional_applications/final_cut_pro_ x
FCP 7? Did it look like it captured normally? Everything go smoothly? Stop normal? Did an error occur at any point? Can you open the file in QT?
In the future...do not rely on ONLY FCP for this task. Get a reputable recorder that can record to ProRes. AJA KiPro, KiPro Mini, Atmos Ninja, Decklink Recorder...lots of options.

HT204053 The ICloud refresh button is gone in my Outlook 2007 due to power outage. How do I get it back?

The ICloud refresh button is gone in my Outlook 2007 due to power outage. How do I get it back?

For Outlook 2007, follow these steps to verify the iCloud Outlook Add-in is active
Open Outlook 2007.
From the Tools menu, choose Trust Center.
Select Add-ins from the left column.
Look at the list of add-ins beneath "Active Application Add-Ins" and verify that the "iCloud Outlook Add-in" is listed.

How to change the search provider when using the Firefox Home Button Search feature?

In Firefox itself I have configured duckduckgo as my default search provider.
But when I use the Firefox Home Button Search it is always set to google and I do not see any option to change that?
I like the Firefox Home Button Search (or whatever it's called) otherwise, but it's annoying that it does not use the default from Firefox.
I use the Google Now Launcher.

''philipp [[#answer-704494|said]]''
<blockquote>
...usually it will be enough to switch the default engine in firefox back and forth once to work around the issue...
</blockquote>
Thank you, problem resolved

UIX Controller - using the browser back button

I'd like to understand more about the controller and what is going on behind the scenes when I hit the back button. It would appear that some form of page caching is taking place and I want to know if I can effectively get a refreshed version of a page (although in some cases it might be just some elements of a page). My application scenario is this:-
Having done a search, I select a row from a results table and add it to a short list (similar to shopping cart) which is then displayed. My search results page i.e. the previous page has a link to the shortlist with its text attribute databound to a string generated when items are added to the shortlist '3 items shortlisted'. When I hit the back button I get the state of the page before I added my item to the shortlist so the description is wrong. Hitting the browser refresh button displays the correct link text. Anyway I can force this behaviour? Is this what I should be trying to do or is there some best practice technique that I can use? There are several instances where I want to do this sort of thing.
Hope that makes sense
Thanks
Ian

Hi,
In the Struts Framework, I have found code in the controller servlet, like this:
* Render the HTTP headers to defeat browser caching if requested.
* @param response The servlet response we are creating
* @exception IOException if an input/output error occurs
* @exception ServletException if a servlet exception occurs
protected void processNoCache(HttpServletResponse response)
          throws IOException, ServletException
          if (!nocache)
          return;
          response.setHeader("Pragma", "No-cache");
          response.setHeader("Cache-Control", "no-cache");
          response.setDateHeader("Expires", 1);
nocache is a boolean that gets initialized from a parameter specified in the web.xml!
multiple header fields for all different web browsers.
(how to set these header fields in JSP, over to someone else)
I can not remember if, when the user uses the Back button to return to a page with these header fields, he gets a 'Page Expires' message, or if the browser will automagically refresh the page.
(It might even be so that for example IE5 will refresh, and that IE6 will give the message)
Luc

How to Use the same iview for both KM End User and the KM Administrator

Hi friends,
*This is my scenario :* How to Use the same iview for both KM End User and the KM Administrator but with different Context
Menu Options.
i followed these steps but im getting same context menu for both KM End User and the KM Administrator .
Assign the role Content Administrator to the user km_admin. This is needed so that km_admin can change
the presentation settings for the KM Folder u201EReports_kmFolder‟.
Now, login with user km_admin. Navigate to the Km Folder reports_kmFolder through Content Administration
-> Km Content. Click on Details link of the folder reports_kmFolder.
Go To Settings -> Presentation. Click on the tab u201ESettings for You‟-> Click on button u201ESelect Profile‟.
Select the radio button corresponding to u201Elayout Set‟, and choose u201EConsumerExplorer‟ from the dropdown.
Click u201EOK‟.
Select both the check boxes corresponding to Items Affected as shown above, and click u201ESave‟
Now, remove the u201ESuper Administrator‟ role from the user km_admin and login with this user.
How rto resolve this????
Regards,
Prasad.

Hello Prasad,
Most likely the user km_admin still has system principal roles assigned, even though you removed the Super Admin role, you should check that this user doesn't have any other admin roles, otherwise it will be considered a System Principal user and will therefore still have access to all content. For more information see http://help.sap.com/saphelp_nw70/helpdata/en/19/56f28fbd4e11d5993b00508b6b8b11/frameset.htm
Try creating a new user with just read access to the content and you should see that it will not be able to make any changes etc.
Regards,
Lorcan.

How to use the Google Android Emulator in Flash Builder on Windows 7?

I want to try out Flash Builder to create an app, but I cannot find out how to use the Google Android Emulator in Flash Builder. The simulators in Flash Builder work, and the android emulator is installed correctly and can run. I just can't seem to connect them. How do I do that?

Hi Pahup,
Thank you for your reply!!
I adapted an Android App using Flash CC on a Mac. I already published this App for the Apple App Store. When I published the App for Android I chose Air 3.7.xxx for Android. I also created the p12 certificate using Flash CC in the publishing settigns for Android. So my App is theoretically finished and ready for Upload.
When I went to the Google Play Store Developer Console I had the options to
1.) Upload APK
or
2.) Prepare Store Entry
...so I prepared the Store entry first. When I go to "APK"-Tab in the console it looks like this:
... it says "Upload APK" and the Button below "Get Licence Key". When I click on the license Key Button it looks like this:
So I think I should enter this RSA-Key somehow into my App BEFORE uploading it to the Google Play Store. This is recommended when an Ap is set to be paid. My Application is set to paid.
I did not use any kind of licensing API (until now - cause I don´t know how and what it is for)
This is all new to me. It is the first App I want to bringt to the Android market. I really hoped it would be as easy as getting an app into the Apple App Store. I found so many step by step instructions for dummies on "How to get an Flash iOS App into the App Store plus creating all the certificates needed", so I thought it would be the same for Android. But there is no help at all at the moment. I am totally confused.
So any help, hint or instrusction would be great!!
By the way - this is the App I want to get into the Google Play Store

How to use Checkbox and radio buttons in BI Reporting

Hi BW Experts,
My Client has given a report in ABAP format and the report has to be develop in BI.It contains Check boxes and the radio buttons. I dont know how to use Checkboxes and radio buttons in Bex.For using this option, do we need to write a code in ABAP.Please help on this issue.
Thanks,
Ram

Hi..
Catalog item characteristic
- Data element
- Characteristic type
Entry type
List of catalog characteristics
Designer
Format (character)
Standard characteristic
Alternative: Master characteristic
(used for automatic product
assignment)
Simple entry field
Alternatives:
Dropdown listbox or radio button
list

How to use the standrad Refresh button in ooalv Grid?

Similar Messages

Maybe you are looking for