How to use the system recovery after add another SSD?

Dear all,
I got a Zbook14 with 1TB HDD with Windows 7 in default. Soon after I received it, I added an M.2 256Gb SSD and migrated my system drive to the SSD.
After an malfunction of the HP Client Security that encrypted my system drive (in SSD). I used the HP recovery tool to reset the computer into the default factory status... This action, which I can not select the harddrive during the recovery, wiped my oroginal system paratation (now the data drive) in the 1TB HDD, and thus I have to migrate the system again (not mentioning the data in that partation..).
I wonder if I can change the target drive for the recovery? I did not move the original HP partations from the HDD to SSD. Only the system partation is moved to SSD.
Thanks.

You don't have any option in terms of changing the target drive for an HP recovery performed by the HP recovery manager.
It is scripted and there is nothing that you as the user can change other than selecting the type of recovery desired.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Similar Messages

Satellite P105-S6197: How to use the system recovery disc

Greetings,
I have a P105-S6197 and I have followed the instructions on the recovery disc,
1. Place the disc or #1 disc into the drive.
2. Power up the computer while holding down the "C" key (release the "C" key when the screen reads "Toshiba")
but these instructions do not work the computer just boots up normally and never runs the disc.
Is there another way to get the disc to run so that I can completely reformat my computer to the way it was when it was first purchased.
Thanks, Edana

I can provide the same information like kody:
There are different options to enable the booting from the CD/DVD drive.
The first one is pressing the C button (you should press it several times) immediately after notebook was powered up.
The second possibility could be the F12 button.
This would enable the boot menu on the screen and then you could choose the CD/DVD drive as a boot device.
Last but not least you could change the booting order in the BIOS.
Set the CD/DVD drive (ODD) at the first place and the notebook should boot from the inserted, bootable CD automatically.
Regards

Can't recover my system using the system recovery media

Last month my computer started reporting an imminent hard disk failure. So I created a set of system recovery discs, purchased a new hard drive, and tried to start the recovery process. But in the process my DVD drive failed, and then my BIOS chip had to be replaced. Finally I'm ready to try to recover my system using an external DVD drive, but after booting to disk 1 and looking like Windows is starting, I get the error message:
HP Recovery Manage
The system recovery media does not support this computer. You are not able to restore this system with the media.
0110-QF521EA#ACB-QE360UA#ABA
0130-ACB-ABA
What's going on here and I how to I recover my system?

I liked Paul Tikkanen's suggestion of downloading an ISO file and booting to that (http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/System-Recovery-Restore-and-All... The system starts a Windows boot but soon asks me to install a CD/DVD driver. I can't find one and the installation will not let me proceed without one. I am getting pretty frustrated!

How to use the 5 recovery discs made when new???

I have a Toshiba Satellite L455-S5046. I purchased this laptop new in a factory sealed box, a little over a year ago.
When I opened it, I made the suggested recovery discs using 5 DVD+RW 4.7GB discs.
Well, now after having issues with installing a windows update and a bluetooth adapter, the laptop just doen't work the same. I get script errors on web pages and have been spending way too much time repairing issues like invalid "not genuine Windows 7" messages.
So, I attempted a recovery using the discs made when new, and the computer tells me the recovery disc is not valid. What the heck? I did exactly what the computer suggested on new startup. The discs are not damaged and have been stored in a safe place.
Can anyone walk me through using these discs? If I order the recovery discs from Toshiba, will this restore to original condition?
Thanks for the help.
Solved!
Go to Solution.

I just made a "System Repair Disk" going through Control panel, Backup and Restore on my L775D and it is identical to the Disk 5 made when I got the machine using the Create Recovery Media process.
C.B.
Toshiba Sat. C75D-B7260 Win 8.1 64 Bit--Toshiba Sat. L775D-S7132 Win 7 HP SP1 64 Bit and Win 10 PRO Technical Preview--Toshiba Sat. L305-S5921 Win Vista SP2 32 Bit

How to use the SYSTEM user in hana cloud

Hello guys, I started with HANA cloud trial, but I havent been able to activate any projects due to an error with permissions,
Repository operation failed
Repository request failed. Cause: Repository: User is not authorized to execute specified operation;User 'DEV_7UKVVFEAC54C2E59OZZQSHXEN' has no authorization, privilege: 'REPO.EDIT_IMPORTED_OBJECTS', package: 'hello'!, code: 40,156, argument:
Now I believe the problem is obvious is that I dont have enough privileges, I went to the Users view and tried to add permissions to my user but I found out other error:
SAP DBTech JDBC: [7]: feature not supported: grantor and grantee are identical
Now I saw in several threads that if we want to add more privileges we should add them using SYSTEM user, but I just dont know how to log in with the SYSTEM user or how to switch to that user.
Any ideas or steps on how to do it?
Greetings!

I just tried performing the exact same steps as described in the tutorial and I can confirm that I get the same error. I get the same error from the Web IDE when trying to activate folders created via the sharing wizard of the Studio.
The problem would seem to be with the Studio version that is currently available from the HANA Tools update site. When packages are created from the project explorer (either directly or through project sharing), they are marked incorrectly as foreign projects (the little blue arrow on the icon).
However if you create the packages via the Content folder of the Systems view (as I did above for the hello package) or via the Web IDE; they are created correctly. I was able to setup a project in the Studio by pre-creating the package in such a way and then creating/sharing the project into the existing package. I still got an error on the .settings sub-folder, but I could ignore it and still activate the other objects.
Therefore I would suggest this approach or using the Web IDE.

How to use the System.nanoTime() ?

I've got a big trouble. I need to create a class with a lot of methods, each method does something, like draw squares, circles, calculate Fibonacci series, and so on. But the problem is:
1 - I need to use System.nanoTime() to calculate the time each method takes to execute and finalize its problem and compare to the time of the other methods.
Any sugestions?
Apreciate your help.
Thanks.

Yeah, sounded too simple, but I'm still wrapped. Could you please show me some code, where I have a method and the System.nanoTime() calculates the time this method takes to execute? It would be great if the method tha uses System.nanoTime() would be a abstract method, so I could use it in other methods for calculating their execution time...
Thanks a lot!

I don't understand how to use the System Font Panel with iMovie.

I need an explanation of how the System Font Panel works. I guess there's a way to get some of those fonts to the iMovie Font Panel, but I can't see how.
Thank you.

I have had good success with the System Font Panel. Now all of a sudden, I only get part of it. Any suggestions on how to restore the entire panel? There are no change size options in the corners like in some dialog boxes. I was going to paste what I have here, but for some reason, paste is not available.

P200 bios crash how to use the crisis recovery mode?

Hello!
I've got a problem with my Toshiba P200 laptop (PSPBOE). De laptop doesn't boot anymore, only when i press fn+B which means he boots in to crisis recovery mode. But now you have to create a disk with phlash16 + a bios.wph file. But i don't know which one i have tried 16 different versions of phlash16.exe with the usb fdd which he does read.
I've used this bios file:
http://be.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?LNG=10&service=BE
Anybody who can tell me what im doing wrong?

It sounds like you have a Toshiba Europe model. I would recomend you contact them or use the European forums. I have not heard of a Fn+B function for the American models. And it sounds like the BIOS flash procedure is different as well.
This signature left intentionally blank.

Outlook Add-In Mail Item How to use the mailitem object after .send() is called on it?

Hello,
I am developing an outlook add-in, where I have added a custom button to "send & process" the mail item.
I want to first send the mail - by writing
((Outlook._MailItem)mailItem).Send();
but after the mail item is sent, I am unable to process the mail item object.
Could some one please guide, how to tackle this?
Thanks!
-Vinay Pugalia
If a post answers your question, please click "Mark As Answer" on that post or
"Vote as Helpful".
Web : Inkey Solutions
Blog : My Blog
Email : Vinay Pugalia

I get the above error in Visual Studio 2013 Ultimate when I process my mailItem in the ItemAdd event
handler.
Upon search, the above error seems to be related to Visual Studio but still searching to find a fix for
it.
In the code, I just read the Recepients of the mailItem, save the mailItem as .msg file to a physical
location & upload the .msg file to a FTP location.
Sorry to say, but sharing the code would not be possible due to NDA.
Could you please guide further?
-Vinay Pugalia
If a post answers your question, please click "Mark As Answer" on that post or
"Vote as Helpful".
Web : Inkey Solutions
Blog : My Blog
Email : Vinay Pugalia

How to use the llb library to add many vi into it??

>>i have design a program with labview 8. now, I want to celect all of my vis into a library.
>>I can use llb manager to create a library, but i found every time i can only add one vi to my library.
>>From "view>> vi hierarchy" I can see all the vi my use. there are to many to add.
>>how to select & simply to add all of my vis', I mean which one I have to add or not,so that I will not miss any vi.
Attachments:
lib1.zip ‏142 KB

First of all, unless you just want to distribute the llb, saving a project into one is a bad, bad idea. A single corrupt VI can corrupt the entire llb, making all of your work corrupt. Development should be done with VIs in folders like you have. An llb is also not compatible with source code control. The forum has numerous posts from people asking for help in recovering a corrupt llb.
The warning being given, you can easily create an llb with all subVIs by opening the main VI and doing a Save with Options>Development Distribution. The VI Library Manager can be used to convert an entire folder into an llb but if the folder contains VIs not used, they will get included also. If you can any VIs dynamically, you will have to manually add them.
Reread what I said at the top.

How to use the output result after executing SUBMIT

Hi,
We want to use a field value which should come from the result of running a standard Report in our own customer program.
And if using SUBMIT command to run that report and then using 'LIST_FROM_MEMORY' to call the result, but it seems the result is in Unicode mode, we can't directly use that result in the called program. What do we need to do? Is there other FM to convert the result? Thanks in advance for your valuable input.
Regards

use of LIST_TO_ASCI?

Using the timeline in After Effects CS3

Hi everryone
does anyone know how to use the timeline in after effects, is it the same as flash, as it seems to be different (more complicated!) anyone got any tips or ideas which may help me,
thanks
I appreciate it
Helen

> They are different in their approach but are both keyframe-based timelines.
I use both programs daily.
I bow, Steve.
Just having the Flash icon on my Mac gives me the creeps.
It's an irrational emotional issue for me, much like my loathing of Photoshop.
About six years ago, ten of us attended a two day immersion Flash class. These are filmmakers and and Photoshop geeks. In 16 hours of instruction, exercises and tutorials, no one ever said "Cool." Not once. it was monstrous.
bogiesan

How to recover the system using recovery disc

please tell me the steps to perform the system recovery using the recovery disc.
my notebook model i hp pavilion dv-4 5009tx

Hi:
Please read the info at the link below.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01867418&cc=us&dlc=en&lc=en
Paul

How can I boot from my recovery dvd to reach the system recovery C: on a extern hard disc

I think a have a virus in my notebook Pavilion 15 and want to restore my C partition with a system back up. I made this system back up a month ago and it is stored on a extern hard disc. I have also made a recovery dvd. How can I boot my notebook from my dvd to start the procedure? I have 2 partions on my notebook. The second partition contains My Documents.
Thanks in advance.
Tineke

It is unlikely that the back-up of the system recovery, that you have stored on an external drive, will be useful in recovering your computer. Please see HP PCs - Performing an HP System Recovery (Windows 8), for instructions on using the HP Recovery Disc set your created earlier. Typically, the disc set is 4 to 6 DVDs.
If you have any further questions, please don't hesitate to ask.
Please click the white KUDOS star to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Using the Dvd recovery disks results in "operating system not found"

I recently bought the DVD recovery disks for Windows 8 from HP. After following the procedure using the 3 recovery disks plus the supplemental "Application and Driver recovery" disk. Immediately after installing the supplemental disk I receive a message that says "contact HP support and "in most cases recovering the hard drive will fix the problem".
When I try to reboot another message appears saying "the operating system is missing". I repeated the procedure several times (also skipping the supplemental disk) and the message is the same.

Hi:
I can't help you with that problem but if you want to try making your own plain W8 installation media, you can use this file and it should work with the embedded product key in your notebook's BIOS.
https://docs.google.com/file/d/0B0W9PBigPy94aVJWSndyTFNFMzg/edit?pli=1
Then use this tool to transfer the file to a 4 GB USB flash drive or DVD.
The tool will also make the media bootable.
http://www.microsoft.com/en-us/download/windows-usb-dvd-download-tool
Then go to the g6z-2200 download page and get the drivers and available software you need.
http://h10025.www1.hp.com/ewfrf/wc/product?cc=us&dlc=en&lc=en&product=5328122
You will also need to install the AMD Chipset Drivers from the link below.
http://support.amd.com/en-us/download/chipset?os=Windows%208%20-%2064
If it works, see if you can get your money refunded from HP for the disks.

How to use the system recovery after add another SSD?

Similar Messages

Maybe you are looking for