How to use the workflow in the pm notification?
Hi, guys
who can tell me how to use the workflow in the PM notification?
ths!
hi
you can refer the following links
[Preparation and Customizing|http://help.sap.com/saphelp_47x200/helpdata/en/7b/b7410e53b211d38abd0000e8284931/content.htm]
[Operation and Link to Application Functions|http://help.sap.com/saphelp_47x200/helpdata/en/2e/f1ab4456ca11d38ac30000e8284931/content.htm]
regards
thyagarajan
Similar Messages
-
How to allocate the workflow to the action defnitions in solution manager
Hi,
we are having solution manager with the CHARM configured, and currently we are looking for the trigger of mail and workitem for change of action. the work flow is designed for that, but how to assign the workflow to the condition and processing type .
please suggest, points are definetly awarded.
Thanks and regards
keerthiHi,
Well, why dont you check the event that gets triggered during the Status change of the user?
This can be done by switching on the EVENT TRACE using SWELS txn and simulate the BUSINESS PROCESS and then check the event trace using SWEL.
After getting the required Business Object and event, Please attach your WF to that EVENT in the BASIC DATA-START EVENTS.
Regards,
<i><b>Raja Sekhar</b></i> -
Using in the workflow process the element of Scenario dimension which conta
Good day All
In the Scenario dimension has been created element which include as children the some store elements of the Scenario dimension (Plan, Fact ...).
This element has been assigned as scenario element for Planning Unit Hierarchy.
When we start the workflow process the children of its elements (Plan, Fact ...) still available for edit on work form for all users.
Question. Work form contains several elements of Scenario. As in the workflow process close all of these elements, creating only one Planning Unit Hierarchy and run the process only once (in fact, one Scenario).
thanksThe total video bit rate is determined by audio & video. Depending on what rate your video file was encoded at will determine how much room is left for audio. PCM(aiff/wav) audio requires a bigger piece of the pie. Video bit rate too high means your overall(video+audio) rate is going above 9Mbps which the format won't allow. The only way to use aiff would be to lower your video file's data rate. The length of your program is also a factor in all of this.
I had some problems in the past with using aiff instead ac3. Although there shouldn't be any issue I experienced playback issues on some players that couldn't be explained but were cleared up by ac3. I have been using the same specs as Dave's suggestion for almost nine years and have not had any issues with mix, quality, or levels. -
Any one knows how to use Axis Framework in the SOAP Adapter Modules
How to use Axis Framework in the SOAP Adapter?
How to add custom handler modules?
http://help.sap.com/saphelp_nw04/helpdata/en/45/a4f8bbdfdc0d36e10000000a114a6b/frameset.htm
I went through the above link on help.sap.com. But still could not create a working example.
I have created a wc on some 3ed party app server using apaches axis. I am trying to call that web service from XI using SOAP receiver? I need to add some security related headers to the soap message, SO I am trying to use a handler. I want to know how to configure this handler in SOAP axis adapter module.
Thank you
MoniRavi ,
I am trying exactly the same. Hers is the scenario.
ABAP Proxy --> PI (7.0) SP 12 ---> WebService.
Since This is service is secured, means it is using OASIS web servie securyty user name token,
I am trying to use AXIS adapter. and I want to configure HandlerBean in which I want to use apache wss4j api to add the userNameToken. I am looking for some documentation on this.
I need to add SOAP action element too as I can not configure this one on the communication channel.
Thanks for any inputs in this regard.
Moni -
How to use bind variables in the following query
CREATE OR REPLACE PROCEDURE MMDB.test IS
sel_qtn VARCHAR2 (10);
CURSOR PT_QUANTITY IS select * from mmdb.product_tree WHERE QUANTITY_CHECK ='E'
AND run_id = 100
a PT_QUANTITY%ROWTYPE;
BEGIN
FOR i IN PT_QUANTITY
loop
sel_qtn := i.quanttity-1;
While sel_qtn>=1
loop
insert into mmdb.product_tree (BILLING_ACCOUNT_NO ,S_CODE) values (i.BILLING_ACCOUNT_NO ,i.S_CODE||'E');
sel_qtn :=sel_qtn -1;
End loop;
commit;
end;Don't duplicate threads: How to use bind variables in the following query
-
How to use SQL functions in the queries
hey guys i wanna know how to use SQL functions in the queries is it possible or not .
Hi,
Wat exactly that set values are?
those from sql query?
How to use count():
The COUNT() function returns the number of rows that matches a specified criteria.
SQL COUNT(column_name) Syntax
The COUNT(column_name) function returns the number of values (NULL values will not be counted) of the specified column:
SELECT COUNT(column_name) FROM table_name
SQL COUNT(*) Syntax
The COUNT(*) function returns the number of records in a table:
SELECT COUNT(*) FROM table_name
SQL COUNT(DISTINCT column_name) Syntax
The COUNT(DISTINCT column_name) function returns the number of distinct values of the specified column:
SELECT COUNT(DISTINCT column_name) FROM table_name
The IN function helps reduce the need to use multiple OR conditions.
The syntax for the IN function is:
SELECT columns
FROM tables
WHERE column1 in (value1, value2, .... value_n); -
In SQL Server Reporting Services (SSRS), drill-down is an action we can apply to any report item to hide and show other report items. They all are ways that we can organize and display data to help our users understand our report better. In this article,
we are talking about how to use parameter to control the Expand/Collapse drill-down options in SSRS report.
Consider that the report has a dataset (dsSales) with following fields: SalesTerritoryGroup, SalesTerritoryCountry, CalendarYear, SalesAmount.
1. The report has the following group settings:
Parent Group: SalesTerritoryGroup
Child Group: SalesTerritoryCountry
Child Group: CalendarYear
Details: SalesAmount
2. Add three parameters in the report:
GroupExpand:
Available Values: “Specify values”
Label: Yes Value: Yes
Label: No Value: No
Default Values: “Specify values”
Value: Yes
CountryExpand:
Available Values: “Specify values”
Label: Yes Value: =IIF(Parameters!GroupExpand.Value="No",Nothing,"Yes")
Label: No Value: No
Default Values: “Specify values”
Value: =IIF(Parameters!GroupExpand.Value="No","No","Yes")
YearExpand:
Available Values: “Specify values”
Label: Yes
Value: =IIF(Parameters!GroupExpand.Value="No" or Parameters!CountryExpand.Value="No",Nothing,"Yes")
Label: No Value: No
Default Values: “Specify values”
Value: =IIF(Parameters!GroupExpand.Value="No" or Parameters!CountryExpand.Value="No","No","Yes")
3. Right click SalesTerritoryCountry icon in the Row Groups dialog box, select Group Properties.
4. Click Visibility in the left pane. Select “Show or hide based on an expression” and type with following expression:
=IIF(Parameters!GroupExpand.Value="Yes", False, True)
Select “Display can be toggled by this report item” option, and select “SalesTerritoryGroup” in the drop down list.
5. Use the same method setting CalendarYear, (Details) drill-down with following expression:
=IIF(Parameters!CountryExpand.Value="Yes", False, True)
=IIF(Parameters!YearExpand.Value="Yes", False, True)
6. Click SalesTerritoryGroup text box in the tablix. Select InitialToggleState property in the Properties dialog box, and type following expression:
=IIF(Parameters!GroupExpand.Value="Yes", True, False)
7. Use the same method setting SalesTerritoryCountry, CalendarYear text box with following expression:
=IIF(Parameters!CountryExpand.Value="Yes", True, False)
=IIF(Parameters!YearExpand.Value="Yes", True, False)
After that, when we preview the report, we can use these three parameters to expand/collapse drill-down.
Note:
In our test, we may meet following issue. We can check the expression of InitialToggleState property to troubleshooting the issue.
Applies to
Reporting Services 2008
Reporting Services 2008 R2
Reporting Services 2012In SQL Server Reporting Services (SSRS), drill-down is an action we can apply to any report item to hide and show other report items. They all are ways that we can organize and display data to help our users understand our report better. In this article,
we are talking about how to use parameter to control the Expand/Collapse drill-down options in SSRS report.
Consider that the report has a dataset (dsSales) with following fields: SalesTerritoryGroup, SalesTerritoryCountry, CalendarYear, SalesAmount.
1. The report has the following group settings:
Parent Group: SalesTerritoryGroup
Child Group: SalesTerritoryCountry
Child Group: CalendarYear
Details: SalesAmount
2. Add three parameters in the report:
GroupExpand:
Available Values: “Specify values”
Label: Yes Value: Yes
Label: No Value: No
Default Values: “Specify values”
Value: Yes
CountryExpand:
Available Values: “Specify values”
Label: Yes Value: =IIF(Parameters!GroupExpand.Value="No",Nothing,"Yes")
Label: No Value: No
Default Values: “Specify values”
Value: =IIF(Parameters!GroupExpand.Value="No","No","Yes")
YearExpand:
Available Values: “Specify values”
Label: Yes
Value: =IIF(Parameters!GroupExpand.Value="No" or Parameters!CountryExpand.Value="No",Nothing,"Yes")
Label: No Value: No
Default Values: “Specify values”
Value: =IIF(Parameters!GroupExpand.Value="No" or Parameters!CountryExpand.Value="No","No","Yes")
3. Right click SalesTerritoryCountry icon in the Row Groups dialog box, select Group Properties.
4. Click Visibility in the left pane. Select “Show or hide based on an expression” and type with following expression:
=IIF(Parameters!GroupExpand.Value="Yes", False, True)
Select “Display can be toggled by this report item” option, and select “SalesTerritoryGroup” in the drop down list.
5. Use the same method setting CalendarYear, (Details) drill-down with following expression:
=IIF(Parameters!CountryExpand.Value="Yes", False, True)
=IIF(Parameters!YearExpand.Value="Yes", False, True)
6. Click SalesTerritoryGroup text box in the tablix. Select InitialToggleState property in the Properties dialog box, and type following expression:
=IIF(Parameters!GroupExpand.Value="Yes", True, False)
7. Use the same method setting SalesTerritoryCountry, CalendarYear text box with following expression:
=IIF(Parameters!CountryExpand.Value="Yes", True, False)
=IIF(Parameters!YearExpand.Value="Yes", True, False)
After that, when we preview the report, we can use these three parameters to expand/collapse drill-down.
Note:
In our test, we may meet following issue. We can check the expression of InitialToggleState property to troubleshooting the issue.
Applies to
Reporting Services 2008
Reporting Services 2008 R2
Reporting Services 2012 -
I need to program a Hittite Fractional-N Synthesizer Evaluation Kit with a HMC702LP6CE an external YIG oscillator. Not sure how to use Labview to control the PLL.
Here is how to use the PLL. But I don't know of how to interact with that device
http://zone.ni.com/devzone/cda/tut/p/id/3781
And for thouse who don't know what a PLL is a free bonus link is here:
http://digital.ni.com/public.nsf/allkb/07BC8D77D4E9AE258625708B007CE74F?OpenDocument
and a second one on what that device is: http://www.hittite.com/products/view.html/view/HMC702LP6CE
Now we are all caught up to speed.
Sam S
Applications Engineer
National Instruments -
Using in workflow process the element of Account dimension with subordinate
Good day All
In the dimension Account has been created element, which contains several shared elements. This element has been added as a Parent member when creating a Planning Unit Hierarchy. When we run the workflow process the child shared elements still open for editing for all users.
May be we can’t using shared members in this case?
ThanksAre you the one who commented out the code you're looking for ?//String desc = StringFactory.getString(attributes.getValue("desc"));You just have to modify you AttributeObject class to hold a new field : String description. And then, it's up to you to create a new constructor or a new setter method.
Btw, this is not a Swing related question. -
How to use bexweb analyser in the webbrowser
Hi ALL,
Suggest me .how to use bexweb analyser in the webbrowser?
Regards,
SumanHi,
A useful link for you..!!
http://help.sap.com/saphelp_nw04s/helpdata/en/0d/af12403dbedd5fe10000000a155106/frameset.htm
-Pradnya -
How to use application item in the page template
How to use application item in the page template.
Thanks,
rajendraHi,
You can refer application item value in template like &MY_ITEM. (note period at end)
http://docs.oracle.com/cd/E37097_01/doc/doc.42/e35125/concept_sub.htm
Regards,
Jari -
How to use TYPE addition with the OPEN DATASET ?
Hi,
How to use TYPE addition with the OPEN DATASET and what is the use ?
For Example:
OPEN DATASET 'test.dat'
TYPE 'lrecl=80, blksize=8000, recfm=FB'
FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
Also, if I wish to do the same for a .CSV file how can we do it.
Thanks,
-SidHi,
OPEN DATASET 'test.dat'
TYPE 'lrecl=80, blksize=8000, recfm=FB'
FOR OUTPUT IN TEXT MODE ENCODING DEFAULT
For more information press F1 on OPEN DATASET.
Thanks -
How to use glob search with the wildcard in command find?
How to use glob search with the wildcard in command find?
I want to find any file its names begin with "readme" string using command find. Why the following command cannot work?
$find /usr/share/doc -name readme*
However, the following commands can work?
$find /usr/share/doc -name readme\* or
$find /usr/share/doc -name readme'*'
I want to know: After using the “\” or ' ', why the wildcard do not become a character "*"?(still a metacharacter).
Another question:
I want to find any file its names begin with "readme*" string using the command find.What command should I use?I want to know: After using the “\” or ' ', why the
wildcard do not become a character "*"?(still a
metacharacter). The backslash is known as an escape character. It means 'use the character value of the next character, not the special meaning' It is used in a lot of places such as command line, global regular expression patterns, and editors such as vi.
In a typical shell, the splat (*) expands to all file names before passing the file names to the current command. So a \* sequence tells the shell to pass a *, not a list of file names, to the command.
Demo - OpenSuSE Linux 10.3
- I have a bunch of files. Let's list those that end in grid. Create one called *grid, and list again
pops@fuzzyVM:~/pops> ls
a b c startgrid stopgrid
pops@fuzzyVM:~> ls *grid
startgrid stopgrid
pops@fuzzyVM:~> ls \*grid
ls: cannot access *grid: No such file or directory
pops@fuzzyVM:~> touch '*grid'
pops@fuzzyVM:~/pops> ls
a b c *grid startgrid stopgrid
pops@fuzzyVM:~/pops> ls *grid
*grid startgrid stopgrid
pops@fuzzyVM:~/pops> ls \*grid
*grid
pops@fuzzyVM:~/pops>In the above, how would I remove the file *grid, and only that file?
Another question:
I want to find any file its names begin with
"readme*" string using the command find.What command
should I use?What were the results of the two versions you tried? And why? -
1,How to use PS to judge the existence of a folder in the specified directory?(use javascript)
2, how to use PS in the specified directory to create to create the folder?(use javascript)
Thanks you!Thanks you!
-
i have deploy an EJB in weblogic 6.1,but how to use jsp to invoke the EJB's method?
thanks!You'd do something like:
<%
//vvv this part can potentially be done in initialization
Context ctx = getInitialContext();
BeanHome home =
(BeanHome)PortableRemoteObject.narrow(ctx.lookup("the.jndi.name"),
BeanHome.class);
Bean b = home.create();
//^^^
Result r = b.invokeMethod();
%>
"toxin" <[email protected]> wrote in message
news:3d2e95e5$[email protected]..
>
i have deploy an EJB in weblogic 6.1,but how to use jsp to invoke theEJB's method?
thanks!
Maybe you are looking for
-
0n the Verify Plug in page of Firefox, it says that Adobe Shokwave Flash is not up to date. I've just doanloaded the latest version and tested it, all is fine. The problem seems to be with firefox! Or????? Please provide a solution best regards Yves-
-
[Solved] Can't change resolution in GNOME
I just installed Archlinux and GNOME. Everythings works find except the resolution is 800x600 and I can't find a way to change it. When I open screens preferences it says my screen is unknown and I can only choose 800x600 or 640x480. My video card is
-
I am using a 5D Mark II and I am getting a series of three curved lines on the photos that are under
I am using a 5D Mark II and I am getting a series of three curved lines on the photos that are under exposed only. Can anyone help me figure out why it is doing this?
-
Hi Guys, I have a Q. What are the risks involved during the Journal Import Without Validation. What is the risks involved in importing the invalid DFF. Kindly help? Thanks, Vijay
-
Dear all, 12.0.4 on Solaris 10 We have a critical problem on production, that apps account is getting locked automatically , even I unlcoked it , it is getting locked again.. this is in production environment and concurrent managers are not coming up