How to use themes w/out hanging message

i got nokia c6 everytime i use themes my message hang how can i use themes without hanging my message? Thank u!
can any1 help me i have problem using themes, everytime i used theme my message hang as in hang but if i closed the theme and use normal its not hang anymore! So how can i used theme w out hang my message! Thank u
MODERATOR'S NOTE:
Duplicate subject title was merged in one post for the detailed query. Please note that the best way to get a response from this community is simply to give full concise information.
Further, please be advised that we do not encourage users to post the same questions in several places. Posting once in the most appropriate board is normally sufficient to solicit answers from our community.
Thank you for understanding.

Use compatible themes dont use dodgy websites
try this site here
http://forum.dailymobile.se/
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Similar Messages

Downloaded ringtones to microSD card but can't figure out how to use them

I downloaded a bunch of ringtones and I can find them if I go to "Files/ringtones" on my microSD card, but when I try to use one in Settings/sounds/phone ringtone they are not there. I can't figure out how to use them. Can anyone help?? Thanks!

When I go to Music app, the ringtones aren't in the list of artists/songs. They are stored in the ringtones folder so I don't think they would show up in the Music app.

What are SMOUTIL1,SMOUTIL2,SMOUTIL3?where can i see?how to use them?

What are SMOUTIL1,SMOUTIL2,SMOUTIL3?
where can i see?
how to use them?
Please tell me,Thank you very much.

SMOUTIL1, SMOUTIL2, SMOUTIL3 are considered the WMD's of the CRM middleware.
If they fall into improper hands, your middleware system could be wiped out and destroyed, reaping havoc on both CRM & ERP.
Please read the all the documentation located here, before you try to use these wmd's.
http://help.sap.com/saphelp_crm40/helpdata/en/c8/93ad3a9bfd664ee10000000a114084/frameset.htm
You may want to also first read the book just published by the SAP press called the SAP CRM Middleware optimization guide, before you try doing any work with the CRM middleware.
Take care,
Stephen

How to use *MonitorManager* to add custom messages in channel monitoring?

Hi experts,
How to use MonitorManager to add custom messages in channel monitoring for custom adapter development(Not in audit log).
like
Type Time Stamp Message ID Explanation
6/25/11 6:39:47 AM 00199942-6e43-02df-96ca-8b538c63dd98 Message processing completed successfully
6/25/11 6:39:47 AM 00199942-6e43-02df-96ca-8b538c63dd98 Message with ID 00199942-6e43-02df-96ca-8b538c63dd98 processed
6/25/11 6:39:46 AM 00199942-6e43-02df-96ca-8b538c63dd98 Message processing started
6/24/11 6:43:26 AM 00199942-6e43-02ef-96b1-7650f3495e03 Message processing completed successfully
6/24/11 6:43:26 AM 00199942-6e43-02ef-96b1-7650f3495e03 Message with ID 00199942-6e43-02ef-96b1-7650f3495e03 processed
6/24/11 6:43:24 AM 00199942-6e43-02ef-96b1-7650f3495e03 Message processing started
6/23/11 6:45:52 AM 00199942-6e43-02df-9698-5be345a9ddf5 Message processing completed successfully
6/23/11 6:45:52 AM 00199942-6e43-02df-9698-5be345a9ddf5 Message with ID 00199942-6e43-02df-9698-5be345a9ddf5 processed
6/23/11 6:45:50 AM 00199942-6e43-02df-9698-5be345a9ddf5 Message processing started
6/22/11 6:43:30 AM 00199942-6e43-02ef-95ff-2c03493dc078 Message processing completed successfully
Edited by: SAP_PI_D on Jun 28, 2011 12:10 PM

Solve by myself

My phone has no more storage but it says i have 5gb on icloud but i don't know how to use them.

My phone has no more storage but it says i have 5gb on icloud but i don't know how to use them.

iCloud storage doesn't affect the available storage on your device. It's for backing up your device and syncing your data, so you can recover the data if needed.
You probably need to import photos/videos to your computer or another destination (like a photo kiosk & burn CDs), and then delete them from your device. Or, delete some unused apps from your device.

What are variables or parameters in Apex and how to use them?

Hi
What are variables or parameters in apex and how to use them to connect and run BI Publisher Report
From Apex URL

Hello Kanaiya,
You should go here: http://www.oracle.com/technology/products/database/application_express/index.html
Look at "What is Oracle APEX?" then download the documentation and review the various PDF files that are available.
If you have a version of APEX installed and available, go through the 2-Day Application Express Developer's Guide followed by the Advanced Developer's Guide.
Good luck,
Don.

I've just brought myself a new MacBook Pro from a friend I have no idea how to use them I YouTube how to reset a MacBook Pro I done everything all we'll In till you reinstall then it say "this disk is locked"??? Can anyone help me please

I've just brought myself a new MacBook Pro from a friend I have no idea how to use them I YouTube how to reset a MacBook Pro I done everything all we'll In till you reinstall then it say "this disk is locked"??? Can anyone help me please

I done everything all we'll In till you reinstall
Please detail ALL you have done so far in the way of troubleshooting? Need this info to avoid the been there done that scenarios.
Care to share which OS you are using?
Which MBP model do you have?

Hi yesterday i downloaded a software from i tunes for keyboard short cut and i don't know how to use them and install them, how to use keyboard shorts bought from i tunes

hi yesterday i downloaded a software from i tunes for keyboard short cut and i don't know how to use them and install them, how to use keyboard shorts bought from i tunes

You can install it on your iOS device (iPad, iPhone, iPod Touch) either by redownloading it directly on the device via the Purchased tab in the App Store app on it, or by connecting the device to your computer's iTunes and syncing it to it.
Syncing apps from a Mac : iTunes 11 for Mac: Sync and organize iOS apps
from a PC : iTunes 11 for Windows: Sync and organize iOS apps
As to how to then use the app, if the description on the app's description page in the store doesn't describe how to use it in enough detail, then is there a link to the developer's website on its description page, and does that have details ?

How to use the BerkerleyDB22.out?

I have got the BerkerleyDB22.out by Tornado2.2.
But I couldn't find how to use the BerkeleyDB22.out in the VxWorks FAQ.
Is that correct that download the BerkeleyDB22.out into the target by Tornado and download the application into the target too?
In the appliction we can use the routine of Berkeley, right?
Thanks for your attention!

Hi Cruiser,
If you have successfully built Berkeley DB for VxWorks according to the instructions here:
http://www.oracle.com/technology/documentation/berkeley-db/db/ref/build_vxworks/intro.html
then you can build your project, and download BDB and your project onto the target.
You can use all the BDB features, with the exception of the DB_TRUNCATE flag for the DB->open() method call, according to the VxWorks notes and VxWorks FAQs:
http://www.oracle.com/technology/documentation/berkeley-db/db/ref/build_vxworks/notes.html
http://www.oracle.com/technology/documentation/berkeley-db/db/ref/build_vxworks/faq.html
Let us know if you need additional help.
Regards,
Andrei

Standard Bapi... how to use them

Hi \
How to use standars Bapi's..
i need step by demo for the same...
Can any buddy ....give me the right way to play with Bapi's
Regads.
Lakhan

Hi,
ABAP -> BAPI ->BAPI Step by Step Example
Business Application Program Interface
1. About the Example
2. STEP 1 - Define a structures for the BAPI
3. STEP 2 - Write Function Module
4. STEP 3 - Create the API Method Using the BAPI WIZARD
5. STEP 4 - Final steps
About the example
This BAPI reads system status for a production order from table JEST and system status text from table TJ02T
Name
ZGetOrderStatus
Function group ZBAPISTATUS
Function module: Z_BAPI_GET_ORDER_STATUS
Import parameters: ORDER_STATUS_IMPORT type ZBAPI_ORDER_STATUS_IMPORT:
 AUFNR Order number (Keyfield)
 SPRAS Language
 ExcludeInactive - Checkbox - Exclude inactive status
Tables T_BAPISTAT type ZBAPISTAT:
 OBJNR like JEST-OBJNR
 STAT like JEST-STAT
 INACT like JEST-INACT
 TXT04 like TJ02T-TXT04
 TXT30 likeTJ02T-TXT30
Export parameters RETURN like BAPIRETURN
STEP 1 - Define a structures for the BAPI
In this step a structures for the parameters and tables of the function module used for the BAPI are defined.
Use Data type -> Structure
Define the following structures:
ZBAPI_ORDER_STATUS_IMPORT which contains the following fields:
 ORDERID Order number (Keyfield)
 SPRAS Language
 ExcludeInactive - Checkbox - Exclude inactive status
ZBAPISTAT:
OBJNR like JEST-OBJNR
 STAT like JEST-STAT
 INACT like JEST-INACT
 TXT04 like TJ02T-TXT04
 TXT30 likeTJ02T-TXT30
Important note:
You will have to define a structure for every parameter in the BAPI. You cannot use the same structures used in existing applications because BAPI structures are frozen when BAPIs are released and then there are restrictions on changing them.
ZBAPI_ORDER_STATUS_IMPORT
ZBAPISTAT
STEP 2 - Write Function Module
Important notes:
 Each BAPI must have its own function group.
 Under the attributes tab remember to select Processing Type Remote Enabled module, otherwise the function module cannot be invoked via RFC and used as a BAPI
 Import/Export parameters can only be BY VALUE for an RFC enabled function module
 We are only creating one BAPI in this example, but you can create related BAPIs in the same function pool, so they will be able to share global data.
Attributes
Import Parameters
Export Parameters
Tables
Code
Notes:
 The subroutine SET_RETURN_MESSAGE is a standard routine used for BAPIs that use the BAPIRETURN structure
 In form Z_BAPI_GET_ORDER_SYSTEM_STATUS there is a test IF 1 = 2. If the test is true a message is displayed. The condition will obviously never be true, and we will never want to display a message in a BAPI. The reason why it is included is, that it create a reference for the message, so that the WHERE USED functionality can be used for the message. This is the SAP standard way to handle it, copied from the Company Code GetList BAPI.
INCLUDE LZBAPISTATUSUXX
THIS FILE IS GENERATED BY THE FUNCTION LIBRARY. *
NEVER CHANGE IT MANUALLY, PLEASE! *
INCLUDE LZBAPISTATUSU02.
 "Z_BAPI_GET_ORDER_SYSTEM_STATUS
INCLUDE LZBAPISTATUSTOP - Global data
FUNCTION-POOL ZBAPISTATUS. "MESSAGE-ID Z3
Types:
begin of Type_tj02t,
 istat like tj02t-istat,
 txt04 like tj02t-txt04,
 txt30 like tj02t-txt30,
end of type_tj02t.
DATA:
Declarations for TABLE parameter
T_BAPISTAT like ZBAPISTAT occurs 0,
G_BAPISTAT like ZBAPISTAT,
Table for object texts
t_tj02t type type_tj02t occurs 0,
g_tj02t type type_tj02t.
Structure for return messages
DATA:
BEGIN OF MESSAGE,
 MSGTY LIKE SY-MSGTY,
 MSGID LIKE SY-MSGID,
 MSGNO LIKE SY-MSGNO,
 MSGV1 LIKE SY-MSGV1,
 MSGV2 LIKE SY-MSGV2,
 MSGV3 LIKE SY-MSGV3,
 MSGV4 LIKE SY-MSGV4,
END OF MESSAGE.
INCLUDE LZBAPISTATUSF01 - Subroutines
***INCLUDE LZBAPISTATUSF01 .
*& Form SET_RETURN_MESSAGE
This routine is used for setting the BAPI return message.
The routine is a standard routine for BAPIs that handles the message
structure for the BAPIRETURN structure. It has been copied from the
BAPI Company Code Getlist
 -->P_MESSAGE text
 <--P_RETURN text
form SET_RETURN_MESSAGE USING VALUE(P_MESSAGE) LIKE MESSAGE
 CHANGING P_RETURN LIKE BAPIRETURN.
CHECK NOT MESSAGE IS INITIAL.
CALL FUNCTION 'BALW_BAPIRETURN_GET'
 EXPORTING
 TYPE = P_MESSAGE-MSGTY
 CL = P_MESSAGE-MSGID
 NUMBER = P_MESSAGE-MSGNO
 PAR1 = P_MESSAGE-MSGV1
 PAR2 = P_MESSAGE-MSGV2
 PAR3 = P_MESSAGE-MSGV3
 PAR4 = P_MESSAGE-MSGV4
 LOG_NO = ' '
 LOG_MSG_NO = ' '
 IMPORTING
 BAPIRETURN = P_RETURN
 EXCEPTIONS
 OTHERS = 1.
endform. " SET_RETURN_MESSAGE
FUNCTION Z_BAPI_GET_ORDER_STATUS
FUNCTION z_bapi_get_order_system_status.
""Local interface:
*" IMPORTING
*" VALUE(I_AUFNR) TYPE AUFNR
*" VALUE(I_SPRAS) TYPE SPRAS DEFAULT SY-LANGU
*" VALUE(I_EXCLUDEINACTIVE) TYPE CHAR1 OPTIONAL
*" EXPORTING
*" VALUE(RETURN) TYPE BAPIRETURN
*" TABLES
*" T_BAPISTAT STRUCTURE ZBAPISTAT
*"Local interface:
*" IMPORTING
*" VALUE(I_AUFNR) TYPE AUFNR
*" VALUE(I_SPRAS) TYPE SPRAS DEFAULT SY-LANGU
*" VALUE(I_EXCLUDEINACTIVE) TYPE CHAR1 OPTIONAL
*" EXPORTING
*" VALUE(RETURN) TYPE BAPIRET2
*" TABLES
*" T_BAPISTAT STRUCTURE ZBAPISTAT
DATA:
 l_aufnr LIKE afko-aufnr,
 l_objnr LIKE jest-objnr.
Check if order exists
SELECT SINGLE aufnr
 FROM afko
 INTO l_aufnr
 WHERE aufnr = BAPI_ORDER_STATUS_IMPORT-orderid.
IF sy-subrc NE 0.
 CLEAR message.
 message-msgty = 'E'.
 message-msgid = 'Z3'.
 message-msgno = '000'.
 message-msgv1 = BAPI_ORDER_STATUS_IMPORT-orderid.
 PERFORM set_return_message USING message
 CHANGING return.
 IF 1 = 2.
 The only reason to include this statement, that will obviously
 never execute, is that it will create a referecence so that you
 can find out where a particular message is being used. This
 functionality is used by the BAPIs programmed by SAP
 MESSAGE e000(z3).
 ENDIF.
ENDIF.
CHECK return IS INITIAL.
Read order status
CONCATENATE 'OR' BAPI_ORDER_STATUS_IMPORT-orderid INTO l_objnr.
IF BAPI_ORDER_STATUS_IMPORT-i_excludeinactive = 'X'.
 SELECT objnr stat inact
 FROM jest
 INTO TABLE t_bapistat
 WHERE objnr = l_objnr AND
 inact <> 'X'.
ELSE.
 SELECT objnr stat inact
 FROM jest
 INTO TABLE t_bapistat
 WHERE objnr = l_objnr.
ENDIF.
IF sy-subrc <> 0.
No object status found
 CLEAR message.
 message-msgty = 'E'.
 message-msgid = 'Z3'.
 message-msgno = '001'.
 message-msgv1 = BAPI_ORDER_STATUS_IMPORT-orderid.
 PERFORM set_return_message USING message
 CHANGING return.
 IF 1 = 2.
 MESSAGE e001(z3).
 ENDIF.
ENDIF.
CHECK return IS INITIAL.
Read order status texts
SELECT istat txt04 txt30
 FROM tj02t
 INTO TABLE t_tj02t
 FOR ALL ENTRIES IN t_bapistat
 WHERE istat = t_bapistat-stat AND
 spras = BAPI_ORDER_STATUS_IMPORT-i_spras.
SORT t_tj02t BY istat.
LOOP AT t_bapistat INTO g_bapistat.
 READ TABLE t_tj02t
 WITH KEY istat = g_bapistat-stat BINARY SEARCH
 INTO g_tj02t.
 IF sy-subrc = 0.
 MOVE:
 g_tj02t-txt04 TO g_bapistat-txt04,
 g_tj02t-txt30 TO g_bapistat-txt30.
 MODIFY t_bapistat FROM g_bapistat TRANSPORTING txt04 txt30.
 ENDIF.
ENDLOOP.
ENDFUNCTION.
STEP 3 - Create the API Method Using the BAPI WIZARD
The BAPI wizard is used toTo expose the remote function module as a BAPI. The wizard will generate some additional code, so the function module is a valid method of the BOR. This allows the BAPi to be called as a workflow method in addition to be called by an outside program.
Note: Each functionmodule corresponds to a method in the BOR
Go to the Busines Object Builder SWO1.
You can either create the new Object type as a subtype of an existing business object or create a new business object from scratch. In this example it would be obvious to create the Object type as a subtype of BUS2005 Production order. However, to illustrate how to create a new Object type from scratch, we will do this.
In the Object/Interface type field write the name of the new Business Object: ZORDERSTAT. Press enter and fill in the additional fields necessary to create the object type.
Supertype: Not relevant because we are creating our object from scratch
Program. This is the name of the program where the wizard generates code for the Object type, NOT the function module we craeted earlier. The program name must not be the name of an existinbg program.
Press enter and create the new business object. Note that when you create the business object a standard interface, an attribute ObjectType and the methods ExistenceCheck and Display are automatically generated. These cannot be changed !
The next step is to add the Z_BAPI_GET_ORDER_STATUS method to the business object. Select Utillities -> API methods -> Add method and write the name of the functionmodule in the dialogbox. Next the dialogbox show below will be shown. This is the start screen of the BAPI wizard. Proceed with wizard by pressing the button.
After you have finished the wizard, tyou will notice that the ZGetOrderStatus has been added to the business object:
You can doubleclick on the method to see its properties. To use the business object you must change the Object type status to Implemented. Use menu Edit->Change releases status->Object type->To implemented. No you can test thge object (Press F8).
Note that the BAPI wizard has added a wrapper class for the function module so it can be sued as method in the business object. Choose menu Goto->Program to display the program:
 Implementation of object type ZORDERSTAT *****
INCLUDE <OBJECT>.
BEGIN_DATA OBJECT. " Do not change.. DATA is generated
only private members may be inserted into structure private
DATA:
" begin of private,
" to declare private attributes remove comments and
" insert private attributes here ...
" end of private,
 KEY LIKE SWOTOBJID-OBJKEY.
END_DATA OBJECT. " Do not change.. DATA is generated
BEGIN_METHOD ZGETORDERSTATUS CHANGING CONTAINER.
DATA:
 BAPIORDERSTATUSIMPORT LIKE ZBAPI_ORDER_STATUS_IMPORT,
 RETURN LIKE BAPIRETURN,
 TBAPISTAT LIKE ZBAPISTAT OCCURS 0.
SWC_GET_ELEMENT CONTAINER 'BapiOrderStatusImport'
 BAPIORDERSTATUSIMPORT.
SWC_GET_TABLE CONTAINER 'TBapistat' TBAPISTAT.
CALL FUNCTION 'Z_BAPI_GET_ORDER_STATUS'
 EXPORTING
 BAPI_ORDER_STATUS_IMPORT = BAPIORDERSTATUSIMPORT
 IMPORTING
 RETURN = RETURN
 TABLES
 T_BAPISTAT = TBAPISTAT
 EXCEPTIONS
 OTHERS = 01.
CASE SY-SUBRC.
 WHEN 0. " OK
 WHEN OTHERS. " to be implemented
ENDCASE.
SWC_SET_ELEMENT CONTAINER 'Return' RETURN.
SWC_SET_TABLE CONTAINER 'TBapistat' TBAPISTAT.
END_METHOD.
STEP 4 - Final steps
When the Business object has been checked and the documentation created, the following steps must be carried out:
 Release the BAPI function module (in the Function Builder).
 Release the business object type (in the BOR ObjectType -> Change release status to -> Implemented ).
 Release the BAPI as a method in the BOR (Release the methods you has created - Set the cursor on the method then
Edit -> Change release status -> Object type component -> To released )
 For potential write BAPIs: Release the IDoc and its segments
You can now display the BAPI in the BAPI Explorer:
Pls reward points.
Regards,
Ameet

How to use Theme generator?

Hi All,
My iViews are displaying the table icon instead of the actual table with grid (as what we see in R/3). I sent a message to OSS and they asked me to regenerate the theme under Portal Display -> ITS theme generator. They also advise to clear the browser cache.
My question is which theme should I generate? Which login should I use to in the username and password fields? I tried a few times to generate but it keep gives the following error message.
http://epprd.mycompany.com.my:50400/irj/portalsap_generate/!?sap-user=administrator&sap-password=abc123&language=en&webTransactionType=EWT
At the same time as I can see there are many upload after I choose a theme, do I need to upload any graphics? How can I generate a theme and clear my cache?
Thanks
Regards,
Bryan

Hi,
First you have to create a new Theme using Theme Editor....Refer this link
http://help.sap.com/saphelp_nw04/helpdata/en/d9/c67c91923a11d5b57d006094b9451c/frameset.htm
Second use portal user & password...more info, refer this link
http://help.sap.com/saphelp_nw04/helpdata/en/af/807f72a20d11d5b580006094b9451c/frameset.htm
Regards,
Senthil K

How to use theme colors

I want to make button with color theme background.
For example if my theme is yellow I want background will be yellow.
For example if my theme is orange I want background will be orange.
Q1. How to do that
Q2. What is the common way to work with theme resources in WP. I meang theme background, theme foregorund?
I am newbie. I tried to search, but couldn't find good example
My .NET Blog with projects and feedback.
Since May 30, 2014 I am waiting for Microsoft fix
these 2 bug. If you know how to speed them up, please help

Hi, try either method.
In XAML:
<Button Background="{ThemeResource PhoneBackgroundBrush}" x:Name="btn1">
Some button
</Button>
In C#:
btn1.Background = (SolidColorBrush)Application.Current.Resources["PhoneBackgroundBrush"];
As to your second question: generally it is a good idea to conform to whatever theme the user has chosen. So if the user's theme's Accent color is red, you don't make a button that flashes blue when the user taps on it. You can do that by using Theme colors
as much as possible instead of defining and using your custom made colors. The accent brush is called PhoneAccentBrush. Here's a link with the theme names and descriptions:
https://msdn.microsoft.com/en-us/library/windows/apps/ff769552(v=vs.105).aspx

Packages to change Look&Feel,Icons etc.,how to use them?

I downloaded several free packages to change the Look&Feel of my Desktop
NHudDrive etc.,when I unzip I only see lots of Icons etc. supposed to
change the Desktop looks but no explanation how to do it.
Have anyone used them,and know how to do it?

Instructions are here http://support.apple.com/kb/HT2493
 Cheers, Tom

Session Variables DATA_TZ, DATA_DISPLAY_TZ, how to use them?

Hello gurus
Has anybody ever used DATA_TZ, DATA_DISPLAY_TZ?
Where do I define the content of these 2 session variables? If done in RPD, then how do I define the initialization block logic for it?
What's the idea behind?
How do I apply it in the front end?
Any lights will be appreciated
Thanks

Thanks for the reply
I saw that document, and then decided to post this question, now you are referring me back to the document. Nice..
Anyways, What I don't understand is where are we applying DATA_TZ, DATA_DISPLAY_TZ?
It doesn't seem to be created in rpd like other session variables.
So if I edit my config files with all of the time zone elements like what the document shows:
<TimeZone>
<DefaultUserPreferred>(GMT-02:00) Mid-Atlantic</DefaultUserPreferred>
<Logging>(GMT-05:00) Eastern Time (US & Canada)</Logging>
<DefaultDataOffset> what do I put here? </DefaultDataOffset>
<DefaultDataDisplay>what do I put here? </DefaultDataDisplay>
</TimeZone>
If I hardcode something, then the displayed data will always be that time zone. But I want it to display dynamically based on user's personal time zone setting in their account.. My analysis is that it has to work based on session variables.
My question is, how do I create these variables? Do I create them in rpd? Or are they already embedded in BI? If so, how would I use them in this case so the server knows to change the variables value based on user's individual account setting?
Thanks for help

How to use the read out feature to read Korean or Arabic

I am now using Acrobat 11.And I want to use the read out loud feature to read the Korean charactors or Arabic.
But only the English words can be read in my computer.
Could some please tell me how to read other country languages besides English?
Thanks.
Have a good day.

Hello Gerd.
I have posted this question at Francois site. No answer yet.
Anyone familiar with the LAF project might be aware of what i'm talking about.
I don't believe questions about this project are not to be answered on this forum. Indeed i've found and posted some questions myself about it and get answered before.
Regards, Luis ...!

How to use themes w/out hanging message

Similar Messages

Maybe you are looking for