How to use Tiger Bootcamp XP partition with Leopard

I had a Boot Camp partition installed under Tiger, which worked without any problems. Now I did a clean install with Leopard and ask myself how I can use the XP Boot Camp from Tiger?
Do I have to reinstall Boot Camp & XP? Or can I just boot it and use it with Parallels / VMWare as I did with the Tiger version?

http://docs.info.apple.com/article.html?path=Mac/10.5/en/15553.html

Similar Messages

  • Still using Tiger 10.4.11, with Parallels 2.0 (build 3214)...

    Hi, All:
    I haven't upgraded to Leopard yet - I'm still using Tiger (10.4.11) with Parallels 2.0 (build 3214) so that I can run Windows XP (so that I can use Quicken for Windows).
    I'd like to upgrade to Leopard, but I am reticent to do so because of having Windows XP on-board. Quicken is essential, and everything works fine together, at present.
    Any suggestions on the most painless way to upgrade to Leopard? How hard is it to reinstall Windows afterward (and should I do so via BootCamp or should I buy a new copy of Parallels [or the other VM brand]?). What about keeping all the Mac software I already have on my MacBook (MS Office 2004, Adium, HandBrake, Carbon Copy Cloner, CleanApp, SuperDuper, etc.).
    Sorry if this has been asked a jillion times before...
    Bill in CT

    There is no reason why you'd lose your XP installation. Your XP virtual drive should be located in your Documents folder.
    By default the installation CD will just upgrade your current OS. Since parallels is installed as an application and some info in your user space this won't be effected.
    Alternately when you upgrade you have three options.
    1) Upgrade (this is the default and will just install your new OS overtop the old but keep all your old applications and user settings and home directory).
    2) Archive and install (this will archive your user directory and then install a new system you'll have to move all you user files into a new user directory).
    3) Erase and install. (you will lose everything since this erases your drive don't select this option)
    For more info check out this article http://support.apple.com/kb/HT1544

  • How to use SQL OVER and PARTITION BY in OBIEE Expression Builder??

    Hi there,
    I want to create a new logical coulmn with the following SQL query.
    SUM(Inventory Detail.Qty) OVER(PARTITION BY Inventory Detail.A,Inventory Detail.B,Item.C,Inventory Detail.D,MyDATE )/SUM(Inventory Detail.Qty) OVER(PARTITION BY Inventory Detail.A,Inventory Detail.B,Item.C )
    How to use the OVER and PARTITION BY in OBIEE Expression Builder??
    Thanks in Advance

    hi bipin,
    We cant use by in Expression builder(rpd) .But use the same formula like this in Fx of answers
    SUM(Inventory Detail.Qty) OVER(PARTITION BY Inventory Detail.A,Inventory Detail.B,Item.C,Inventory Detail.D,MyDATE )/SUM(Inventory Detail.Qty) >OVER(PARTITION BY Inventory Detail.A,Inventory Detail.B,Item.C )SUM(Inventory Detail.Qty by Detail,ITEM,Mydate)/SUM(qty by detail,item)
    First check the numerator whether it was giving correct results or not then go with denominator
    compare the results with sql that u have
    Let me know if that does work
    thanks,
    saichand.v
    Edited by: Saichand Varanasi on Jul 27, 2010 9:27 PM
    Edited by: Saichand Varanasi on Jul 27, 2010 9:28 PM

  • How to use the same OC4j server with different port number

    How to use the same OC4j server with different port numbers..?
    I have to OC4J installed on my machine on different hard disk drives....
    I want to be able to run both the server simultaneously..?
    is it possible ..it yes then how..?
    for that i have changed the port number of one server...
    but when i am trying to start the other server with different port number..it says that JVM -Bind already...
    Is there any clues...?
    Nilesh G

    In the config directory:
    default-web-site.xml: Change the port the HTTP listener listens on
    jms.xml: Change the port the JMS service listens on
    rmi.xml: Change the port the ORMI listener listens on.
    Or, you can add another web-site.xml file, and deploy your applications to 1 server, and bind the web applications to the different web sites. This way you only have to deploy your applications to 1 place.
    Rob
    Oracle

  • How to use "Notes" on my iPad with my existing iCloud address?

    How to use "Notes" on my iPad with my existing iCloud address? It asks me to create a new one...

    Did I overlook some critical info here? I'm having the same problem described by Henry5, but I'm signed in to iCloud with my AppleID which is not the same as my Mobile Me/iCloud email. I keep being asked to create an account (which it won't allow me to do since the account already exists) but no where do I see an option to use the existing account. I also tried logging out with my AppleID account, and using the iCloud email, but that doesn't work.
    I just want to sync my notes and mail... this is really irritating!

  • How to use FM SO_DOCUMENT_REPOSITORY_MANAGER send mail with CC.

    Dear Experts:
    Please help me. How to use FM SO_DOCUMENT_REPOSITORY_MANAGER send mail with CC.
    My Program code is as follow:
    *Send the mail.
    tb_receipients-recnam = 'BAITZ'.
    tb_receipients-recesc = 'B'.
    tb_receipients-sndex = 'X'.
    tb_receipients-att_fix ='X' .
    APPEND  tb_receipients.
    CALL FUNCTION 'SO_DOCUMENT_REPOSITORY_MANAGER'
      EXPORTING
        method       = wa_method1
        office_user  = wa_owner
        ref_document = wa_ref_document
        new_parent   = wa_new_parent
      IMPORTING
        authority    = wa_authority
      TABLES
        objcont      = tb_objcnt
        objhead      = tb_objhead
        objpara      = tb_objpara
        objparb      = tb_objparb
        recipients   = tb_receipients
        attachments  = tb_attachments
        references   = tb_references
        files        = tb_files
      CHANGING
        document     = wa_document
        header_data  = wa_header.
    endform.                    " send_mail
    By the why, tb_receipients-recnam = 'BAITZ'. What's the meaning of 'BAITZ'? Thanks!

    you can use FM SO_NEW_DOCUMENT_SEND_API1
    WA_RECV TYPE SOMLRECI1,
    IT_RECV TYPE STANDARD TABLE OF SOMLRECI1.
    wa_recv-receiver = 'TO email address'.
    wa_recv-rec_type = 'U'.
    wa_recv-com_type = 'INT'.
    APPEND wa_recv TO it_recv.
    CLEAR wa_recv."To Recipient
    wa_recv-receiver = 'CC email address'.
    wa_recv-rec_type = 'U'.
    wa_recv-com_type = 'INT'.
    wa_recv-copy = 'X'.
    APPEND wa_recv TO it_recv.
    CLEAR wa_recv. "CC Recipient
    wa_recv-receiver = 'BCC email address'.
    wa_recv-rec_type = 'U'.
    wa_recv-com_type = 'INT'.
    wa_recv-blind_copy = 'X'.
    APPEND wa_recv TO it_recv.
    CLEAR wa_recv. "BCC Recipient

  • How to use the eventing and databag with a WAS 6.20 ?

    How to use the eventing and databag with a WAS 6.20 ?
    Is what there is a good guide for these services?
    Thank's

    In the raise event you can pass the value
    like below.
    <SCRIPT>
    function raiseEvt(value1){
    if(window.document.domain == window.location.hostname){
    if ( document.domain.indexOf(".") > 0 ) document.domain = document.domain.substr(document.domain.indexOf(".")+1);
       EPCMPROXY.raiseEvent( "urn:com.sap:BWEvents","BWiViewevent", value1, null );
      // alert('tree domain'+document.domain);
    </SCRIPT>
    and in the
    subscribe event you can get the values like below.
    <script language="javascript">
    if(window.document.domain == window.location.hostname){
    document.domain = document.domain.substring(document.domain.indexOf('.')+1);
        EPCMPROXY.subscribeEvent("urn:com.sap:BWEvents","BWiViewevent", window, "myreceiveEvent");
    function myreceiveEvent( eventObj ) {
          document.forms[0].gp_hidden.value = eventObj.dataObject;
    </script>
    Also look at the following link for a complete documentation.
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/Enterprise%20Portal%20Client.pdf
    Regards
    Raja

  • How to use warn about changes property with page menus

    how to use warn about changes property with page menus

    Hi,
    If u will enable this property, then u will get warning message as a popup in case of change of state of VO.
    Regards,,
    Gyan

  • ANyone know how to use an Apple keyboard A1359 with a MacBook Air?

    Does anyone know how to use an Apple Keyboard A1359 with a MacBook Air?

    I'm going to ask the hosts to move this to the macbook forum since you're more likely to get answers there than in the iPad one.

  • HT4623 How to use epson iprint after connected with iPad help

    How to use epson iprint after connected with iPad help.

    When you open Epson iPrint, you will see the various options of ways to proceed, e.g., Photos (to print photos), Maintenance (for printer maintenance). Scan (to perform scanning).

  • How to use Time Capsule via INTERNET WITH WINDOWS 7 SMB Cloud

    how to use Time Capsule via INTERNET WITH WINDOWS 7 SMB Cloud

    Get a vpn router.. I have no idea where you are in the world but you can find reasonable stuff for not too much money or even a general router that takes third party firmware like dd-wrt can run openvpn. 
    Set up the vpn router in place of the TC, as the main router in the network. Simply bridge the TC and place it behind the router. It will be accessible as part of the network via the vpn.
    This is the only safe way to do it via windows.
    http://www.dyncommunity.com/questions/18132/accessing-time-capsule-from-windows- 7-over-the-int.html
    If you google around I have seen posts about how to access TC by port forwarding SMB on the TC.. using a different port.. To me this is going to slow down the hackers by a day or two.. then they will discover the open port and access your network.. not just the TC.. they now have SMB access to everything. Don't do it. There is very little security on SMB.

  • Does anyone kwow how to use the Korg M50 editor with garageband?

    does anyone kwow how to use the Korg M50 editor with garageband?

    Moved from the Creative Cloud to the Photoshop forum. They will be able to help you here.

  • I want to migrate to new Mac. How do I also Restore the partition with old Snow Leopard?

    I will install a second internal HD first, and use Time Machine Restore to it with the Migration Assistant on the new Mac's Mountain Lion.
    Then I will erase the preinstalled Mountain Lion internal HD, and:
    How do I now proceed to Restore to an internal partition on the new Mac, my (still) left Time Machine copy of Snow Leopard,( just a spare system partition, also for Power PC Apps)?
    If I install a new Snow Leopard first from DVD and then tries the Migration Assistant in it, can it us a Mountain Lion Time Machine backup of the Snow Leopard partition? Or can Mountain Lion Migration Assistant be used for Restoring and Migrating Snow Leopard.
    I do not have a Snow Leopard Time Machine backup copy of the partition left. Otherwise I could have taken that on a new installed Snow Leopard.
    Thankful for all ideas, also I understand that HD Restore fully on the whole partition without using Migration Assistant will not work.
    Another question:
    I hope that I can use my new Mac with the old Mac OS X licenses and transfer the new preinstalled Mac OS Mountain Lion license to the old Mac, before giving it away?
    Thanks,
    /groundliner

    Thanks!
    I'm not familiar with the issue of what Mac OS new Macs manages. That puts things in another perspective. I have Lion on a fast 8 GB USB Stick, can I not boot from that either? Of Course, I may be able to put the Mountain Lion Installer on the stick, instead. It could not upgrade the stick to Mountain Lion due to not having enough space for that. But I maybe could fix that. Just wondering - I have several hard disks around, I could try to put the preinstalled Mountain Lion OS version on one of those. Best copying method?
    I did not know that transfer of OS Mountain Lion was not allowed. Leopard license document mentions transfer of hardware and software to another person. So I thought the Mac App Store license was similar - bought for and on just this old iMac, that it also could be transferred to another person. Which would solve the problem for my friend who should have it!
    I keep planning, but I think running old Power PC Apps maybe was no big deal.
    /groundliner

  • How to Implement 30 days Range Partitioning with Date column. Not Interval

    Hi,
    I am using the db:
    Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit
    Current table structure is:
    CREATE TABLE A
    a NUMBER,
    CreationDate DATE
    PARTITION BY RANGE (CreationDate)
    INTERVAL ( NUMTODSINTERVAL (30, 'DAY') )
    (PARTITION P_FIRST
    VALUES LESS THAN (TIMESTAMP ' 2001-01-01 00:00:00'))
    How can I define virtual column based partitioning with RANGE partitioning without using INTERVAL partitioning.
    And that is with Intervals of 30 days.
    For monthly I am trying as
    CREATE TABLE A
    a NUMBER,
    CreationDate DATE,
    monthly_interval date as (to_char(CreationDate,'MM-YYYY')) VIRTUAL
    PARTITION BY RANGE (monthly_interval)
    partition p_AUG12 values less than (to_date('08-2012','mm-yyyy')),
    partition p_SEP12 values less than (to_date('09-2012','mm-yyyy')),
    partition p_OCT12 values less than (to_date('10-2012','mm-yyyy'))
    Enable ROw Movement
    BUT CAN'T INSERT the data even for that:
    Insert into a (a, CreationDate)
    Values (1, '12-10-2012')
    Insert into a (a, CreationDate)
    Values (1, '12-10-2012')
    Please suggest..

    Hi rp,
    Interval Partitioned to Range. Created Daily Partitions from Monthly Part. got complicated so I am posting here.
    Basically,
    I know Interval Partitioning is a kind of Range partitioning. But explicitly for Interval Partitioned tables XML Indexes are not allowed as discussed here:
    XMLIndexes on an Interval Partitioned Table??
    I can do monthly partitions as :
    CREATE TABLE A
    a NUMBER,
    CreationDate DATE,
    monthly_interval varchar2(8) as (to_char(CreationDate,'MM-YYYY')) VIRTUAL
    PARTITION BY RANGE (monthly_interval)
    partition p_AUG12 values less than ('09-2012'),
    partition p_SEP12 values less than ('10-2012'),
    partition p_OCT12 values less than ('11-2012')
    ) Enable ROw Movement
    Insert into a (a, CreationDate)
    Values (1, '12-SEP-2012')
    Insert into a (a, CreationDate)
    Values (1, '14-SEP-2012')
    Select * from A partition (p_SEP12)
    Select * from A partition (p_AUG12)
    Select * from A partition (p_OCT12)
    Can we do it for 30 days partitions, instead of the monthly partitions. ANY suggestions..
    Thanks..

  • HT4818 Can you use both Bootcamp and Parallels with the same Windows 7 installed

    I have Parallels installed with Windows 7.  Can I use both Bootcamp and Parallels on the same machine depending on whether I just want to work in Windows all day (Bootcamp) or alternate during the same session (Parallels)?

    You can, yes. But there is a complication: once you activate windows it will only be activated for one of the two methods you use. So, let's say you install into boot camp and activate windows. You can then install Parallels and it will find your boot camp installation, but when running in Parallels, Windows will report that it is not activated. Or, you can activate it in Parallels and when running in Boot Camp Windows will report that it is not activated. The reason for this is because Windows thinks it is running on different computers depending on how you boot it. This may not be an issue for you if you run Windows a lot one way and just occasionally the other way, so be sure to activate Windows in whichever method you use more often. Hope this helps!

Maybe you are looking for