How to use Time capsule as Router and link to a Receiver

Hello
I'm currently using a Time capsule as WLAN Router. The plan is that I'm attaching My NAS via Ethernet LAN to the Time capsule. Time capsule will be linked via the Ethernet LAN cable to My Receiver so that I can Listen My Music over My home loudspeakers.
Can anybody Tell me whether described will work? If yes, are there any setitings in the Air Port Utility I have to consider to make everything work?
Thank you!

The TC is not a streaming device.. it is merely a hard disk mounted inside a router.
That means My Receiver.. whatever that happens to be.. has to be a media device that can play from a network file store.. So there is no settings in Airport utility.. because the TC is too dumb to need to know anything.
BTW the TC is a bad place to store files, as it has no way to back itself up.

Similar Messages

I'd like to use Time Capsule as Router and remove D-Link Router. Is that what it's designed for?

I currently use a D-Link Router and also have a 1st generation time capsule as use as a back up device. I've just purchased a new 2TB Time Capsule and would like to use it as my primary "only" router just after my cable modem, it that there primary design?
Currently I have a Cable modem with a Static IP address and then on the D-Link I've configured my NAS, Power Mac, iMac and Computers with all there own IP address. I've looked on the Time Capsule I have hooked up now and I'm not sure if the TC will let me do that.
I really should of researched before, but I'd just bought a mini mac with lion server and it talked about the ease of using TC with it and purchased before researching...

I've just purchased a new 2TB Time Capsule and would like to use it as my primary "only" router just after my cable modem, it that there primary design?
Yes, the Time Capsule is designed to connect directly to a modem.
on the D-Link I've configured my NAS, Power Mac, iMac and Computers with all there own IP address
You can set up "static" IP addresses for each of your network devices....IF....the Time Capsule is set up to be the "main"' router on the network.
Open AirPort Utility and click Manual Setup
Click the Internet icon
Click the DHCP tab below the icons
The DHCP Reservations box will allow to you assign a specific IP address based on the MAC address or AirPort ID of each device.
Devices could be assigned IP addresses in the 10.0.1.x range or 192.168.1.x range depending on your preference.

Using time capsule model A1409 and trying to use it as only backup. Already have Verizon wireless router. Do not know which cable port to use in back of time capsule. And also it is asking for password. Have tried all of mine and it will not work.

Want to us my time capsule model A1409 as only backup. 2 TB hard drive.
Already have Verizon wireless router. Do not want to use Time capsule as router, only back up for iMac.
Do not know which cable port to use in back of time capsule to Ethernet port back of my iMac.
And also it is asking for password for the server John Garland's Time Capsule so Time machine can access it..
Have tried all of passwords can think of and none work.
Held the reset button for one second on back of capsule and do not see if anything happened.
What a conundrum.
Appreciate any help to get this working.
Thanks,
John R

I have a 2TB Timecapsule and really only use it for Time Machine backups. But the Wi-Fi side is used to sync my iPad at times.
Mine is wiredup thus;
Eth cable from iMac to modem (not the WAN port should you have one), then eth cable from modem to T/Cap in the WAN port (bottom port with an O sign above it)
I believe when its connected up you may have to set up a wireless network. Follow the instructions to set up Wi-Fi and Network
and then give it a password. The WiFi icon should appear in the menu bar where you can switch it on or off.
Its been sometime since I set it with the help of Apple Techs so I might be a bit rusty.
Alan

How will the Time Capsule support IPv6 and coop with the new emerging security threats that will emerge due to the new technical possibilities that IPv6 provide?

How will the Time Capsule support IPv6 and coop with the new emerging security threats that will emerge due to the new technical possibilities that IPv6 provide?

Cross your fingers and hope.
Obviously if there is any big or known threat Apple will send out a firmware fix.
But the TC is designed to be end user simple device. It has no firewall that is visible at any rate. I don't know that it truly doesn't have a firewall but it is not part of the end user controls.
IMO if you have major security concerns that go beyond end device firewall, which is where Apple do put most of the security, since firewall in the router is plainly not a stop to anybody deliberately downloading an infected file or website, and most end users.. do not want a firewall that prevents them using the web like a business does, where only certain ports are allowed. Everything else tough luck.. you are not allowed to use it. Then TC is unsuitable for you anyway.. buy a proper firewall appliance.

How to use Time Capsule via INTERNET WITH WINDOWS 7 SMB Cloud

how to use Time Capsule via INTERNET WITH WINDOWS 7 SMB Cloud

Get a vpn router.. I have no idea where you are in the world but you can find reasonable stuff for not too much money or even a general router that takes third party firmware like dd-wrt can run openvpn.
Set up the vpn router in place of the TC, as the main router in the network. Simply bridge the TC and place it behind the router. It will be accessible as part of the network via the vpn.
This is the only safe way to do it via windows.
http://www.dyncommunity.com/questions/18132/accessing-time-capsule-from-windows- 7-over-the-int.html
If you google around I have seen posts about how to access TC by port forwarding SMB on the TC.. using a different port.. To me this is going to slow down the hackers by a day or two.. then they will discover the open port and access your network.. not just the TC.. they now have SMB access to everything. Don't do it. There is very little security on SMB.

How to use time capsule for wireless back-up but not internet?

Hello,
I have a tower and recently a laptop at work. The tower is connected to our local network with an ethernet cable and the laptop with wireless. So, the internet connection is fine for both.
I was hoping to use my time capsule to do time machine backups on my laptop. Do you have any advice on how to configure this? I do not want to use the time capsule to extend my Internet, as I believe my work I.T. would prefer to handle all access to their network.
Perhaps there is some documentation about doing this that you could point me to? I have not been able to find it.
Thank you for your help.

Your original question was How to use Time Capsule for wireless back-up but not Internet?
There is no reason for you to connect the tower....or anything else...using Ethernet if your goal remains that same as you stated.
If you are asking if you can backup the Tower using Ethernet, and not wireless, then you can connect the tower to one of the LAN <-> ports on the Time Capsule....not the WAN port.
Yes, it appears to work without plugging into my tower.
Correct, it will work.
I just have to select the network that it created. Of course, I have no access to the Internet while this is happening and it can not auto backup, unless I am on that wireless signal.
As I stated, that is the downside to trying to back up without an Internet connection. You have to establish another network...and backup over that network.
If you are asking if you can stay connected to the work network while also backing up to your non-Internet "private" network, that is not possible.

How to setup time capsule as router

This is my first try at using time capsule. how do i set this up as a router. i have bell dsl modem and would liek to use the time TC to be the router for wireless and wired connection. If I setup IP Address 192.168.1.1 will this be same ip address I set for Router Address? Do I need to change the Connection Sharing option?
The modems IP is 192.168.2.1.
Under Airport Utility - Settings - Internet:
-Internet Connection Tab - connection using: Ethernet & connection sharing: off (bridge mode)
-TCP/IP tab - configure IP: manually; ip address: 192.168.1.1

You might want to check with your service provider to see if the device can be configured as a "bridge". That is the way it must be setup if you want it to work correctly with the Time Capsule.
You might want to look at this link for more information on your modem.
http://help.iglou.com/questions/92/Siemens+Speedstream+4200+Bridged+Configuratio n

Using time capsule through Belkin and Linksys routers

I am working on a large house that has 4 wireless routers spread out. They are all attached via ethernet to a hub. There is a Linksys (which gets the internet and distributes the IPs) There are two apple extremes (one of which connects to a printer) and a Belkin (with 2.4 and 5.0ghz). They all have the same network name. The wireless printing appears to be working fine across the network, but the time capsule only seems to work when im in range of it. Can i get it to work through the network?

--Can I use Time Capsule through my landlords existing WiFi network witihout ever plugging it directly into the modem or router?
Yes, if your landlord has an Apple router providing the wireless signal. No, if not.
--Could I then use Time Capsule to extend the wireless network from upstairs and get a stronger wifi signal in my suite?
Yes, if your landlord has an Apple router providing the wireless signal. No, if not.

How to divide time capsule for Mac and PC back up

Want to know if a cant use my time capsule to do back up for my MacBook and do manual back up for the PC of my wife

How to divide time capsule for Mac and PC back up
It is not possible to divide or "partition" the Time Capsule disk......unless you pull the hard drive from the Time Capsule (which voids the warranty), place it in a separate enclosure or caddy, connect the enclosure directly to your Mac, and use Disk Utility to partition the disk. Then, you must reinstall the disk back in the Time Capsule.
This is a lot of work....best done by an experienced technician. The operation will likely cost more than the cost of the Time Capsule.
Life would be tons easier if you used the Time Capsule with your MacBook and added a separate USB drive to the PC.
If you do not need to divide or partition the Time Capsule storage space, and you are willing to have the Mac and PC share the same space, take a look at an application like Macrium Reflect to backup the PC to the Time Capsule disk.
Still, having done this in the past, things would be much faster and easier for you if you use a separate USB drive for the PC.

How to use time capsule as hard drive and connect with existing net gear router

I have a netgear D6300 router, which i use to connect to internet - which is excellent so far for my downloads and games etc for my PS4 and hence am keen to continue using it. I bought the Airport time capsule for wireless storage, and when i set it up, I was advised on setup to connect the TC to my router, and it did what it needed to do.
Now, in order to connect to internet, i need to connect wifi to net gear router, but to access time capsule, i need to change wifi connection to my newly created wifi network with TC.
I want to use TC as a backup storage for my mac (its a 3TB TC), but also, my laptop has only 500gb hard drive which is now half full from downloads, so i want to transfer all my downloads to my TC and use it as an external hard drive, and future downloads to TC - but when i connect to wifi of TC, i can copy my folder on my mac, but not paste it to TC in finder. (the only thing in TC is an image of tmg of my macbook from first backup.).
How do i use TC as an external HD - there wasn't much difference in price of external wifi/wireless HD between non-TC and TC at 3gb, so i just thought i'd go for the airport TC option.
And is it possible to keep connected to wifi internet via net gear router, AND wifi TC - the whole point i bought it (from US shipped to australia on eBay, therefore not able to send back) was to use TC as external large HD via wifi, but keep my net gear router going.
Surely there is a way to not having to flick between wifi connections of TC and net gear internet.
When i'm connected to TC, i can't access internet, only TC.
And I don't really want to connect TC to my router via ethernet cable, as too many cables.
This can't be a difficult situation to manage, but i'm not sure how to do it.
Thanks

And I don't really want to connect TC to my router via ethernet cable, as too many cables.
Sorry but you have very little choice.
The TC can join to a wireless network.. but it is flakey, poor, slow and highly NOT recommended way to do things.
Nevertheless if you want to give it a try .. here is the method.
How do I setup my time capsule with wireless internet?
You SHOULD, plug the TC into the Netgear and run it in bridge mode.. you set the wireless to create a wireless network.. then when you connect to the TC it will be also connected to the internet and fast.
(if you don't do that you may as well have used a USB drive plugged into the Netgear, as it would be just as good).
TC is not actually designed for mixing Time Machine backups and files.. but if you are just storing downloads that is ok.. but I strongly recommend you use a DMG or sparsebundle to prevent the TM and the data from messing each other.
See Pondini instructions here.
Q http://pondini.org/TM/Time_Capsule.html

How to use time capsule as main wifi router?

it is connected in bridge mode to an ethernet port, connected by a wifi modem. how to i set it as the main router and get rid of the other wifi. the phone plug wont connect because there isnt one, what do i need to get so i can plug directly to the time capsule. im not tech savy so im not quite sure what im doing.
regards, Chris

Chris,
Here are the basics:
Rule 1: If your modem/router is acting as the main router (it is), then the Time Capsule must be configured in Bridge Mode.
Rule 2: If you want the Time Capsule to be the main router, then your modem/router must be configured in Bridge Mode.
Check with the support folks of your modem/router to find out whether this is even possible, and if so, how to do it....and more importantly make sure that your Internet service provider will support this type of setup.
Another option would be to simply replace your existing modem/router with a simple bridge mode modem. Ask your ISP about this.
Until you have a clear handle on this.....we cannot help you with support on your modem/router......it would be best to leave well enough alone and stay with your current setup with the Time Capsule in Bridge Mode.

How can I use Time Capsule for backups and an external hard drive?

I have a large file/program on my iMacs hard drive that is 62GB and I would like to keep only things I need on my iMac. I have a 2tb time capsule currently used for backing up. It has roughly 1.66 TB free. How can I move the 62GB program onto my Time Capsule and still use it for backups? Also, is this stable? And don't worry about backing the program up because it came on 8DVD discs.
Thanks.

1. Mount the Time Capsule as a drive and drag the application over to it. If the application requires system components, those won't be transferred; if those are only data files, you may be able to drag them over as well and then create a symlink or alias to a folder enclosing their current location.
2. The application may work slowly if this is done. Note that Time Machine will eventually use up all the free space on the Time Capsule that isn't reserved by being allocated to a disk image.
(66649)

How can I use time capsule to store and easily access photos?

I got the time machine to back up to computers but also I thought I could use it as a networked HD where we could store photos and easily access them. Can I configure time machine in any way in order to do this? Thank you.

Works like a charm.
Until you get a message that your iPhoto Library is corrupted. It will happen.....the only thing is that you will not know is when this will happen.
There are two kinds of users who try to run the iPhoto Library from the Time Capsule.......those that are having problems, and those that will have problems.
Question: Is it ok to now delete these huge (approx 30GB on 3 folders) from my macbook drive...?
Let's see.....you deleted the files from your MacBook.....so now the only remaining version of your iPhoto Library is on your Time Capsule.
When....not if...the Time Capsule has a problem.......what will you do when you you cannot access the iPhoto Library?

How to use time capsule as an external wireless hard drive?

I have the latest version of time capsule and would like to use it not only for backups but also to save some files that I don't want to keep in my Macbook Air, which is very limited in terms of storage. Is it possible?

Here is my general list.
Store files on the TC.
This is asked several times a day.. obviously people are struggling with their latest SSD being too small.
The TC is not suitable for network file server.. but many people having no choice press it into service as such.
Major issues.
1. No backup.. no way Time Machine can backup a network drive. No place to backup to.. So all your files will be at risk. And you will need to buy a third party like CCC to do backup.
2. The TC cannot be partitioned and mixing TM backups and data is not great. It was and is and ever shall be a backup device for Time Machine.
3. The drive is slow to spin up and quick to spin down.. there is no control. In fact the TC is so lacking in controls for even the router side.. that you cannot do more than the most basic of setups.
The following are controls on the hard disk side.
Reformat it. You can name the share. You can do a full archive of the whole disk. This will go at a speed of aprox. 30-50GB/Hr so calculate how long an archive of a full 2TB will take.
4. iPhoto in particular can easily corrupt its entire library with wireless networking causing a disconnection to one photo. Even if you do this;;; do not move your photo library... you have been warned!!
Even apple btw say don’t do it.
http://support.apple.com/kb/TS5168 Although mostly about FAT32 it adds network drives.
5. iTunes can constantly lose connection to the library. The disk is slow to respond.. itunes on the computer will constantly spit out errors. Even in the midst of streaming the TC can spin down the disk due to caching.
6. Do not use any live files on the TC no matter what else you do.. if you edit files in whatever program the file must be on the local hard disk.
7. The only suitable location for most libraries is a computer. You can plug in an external hard disk.
Read pondini for some work arounds.
Q3 here. http://pondini.org/TM/Time_Capsule.html

How to use time capsule for itunes

Hi:
I have a new Time capsule..and I want to use to store the Itunes liberary. Is this a good idea ? How do I go about doing it ? I currently have a mac-mini running snow leopard..which is my primary device for Itunes. Family has 2 ipads, 2iphones and 2 other macbooks...
Thanks

GGNYC1 wrote:
Hi:
I have a new Time capsule..and I want to use to store the Itunes liberary. Is this a good idea ?
No, sorry but it isn't. The TC is designed for Time Machine. It has no way to back itself up, and TM cannot backup network drives. It is slow to respond to requests because the green drive has built in fast spin down and slow spin up. The TC has no media smarts.. it has no smarts at all actually. It is a dumb as a board hard disk in an almost equally dumb router.. you can think of it as dumb and dumber!!
The how to do is discussed all over the place.. Apple have instructions on moving the itunes libary.. just look it up.
I currently have a mac-mini running snow leopard..which is my primary device for Itunes. Family has 2 ipads, 2iphones and 2 other macbooks...
Thanks
That is near to the ideal setup.. a mini makes a great media computer.. and will support iTunes.. just plug in an external drive and then TM can back it up.

How to use Time capsule as Router and link to a Receiver

Similar Messages

Maybe you are looking for