How to use TIMS type KF

Dear all
    Check in RSD1 the TIMS type KF is stored as char 6,
    but in library , it is said stored as char 8.
    Now i can see the value in the kf in cube: 04:00:00
    but display at query as: 64200.00
    Any guidance is greatly appreciated!

Similar Messages

How to use time stamps en how to make time stamps in Adobe Reader

How to use time stamps en how to make time stamps in Adobe Reader

Did you find a solution? I am having the same problem.
PDF compatibility level is too high. Supported PDF versions are PDF 1.3 and PDF 1.4 (Acrobat 4, 5 and 6). If you are using Acrobat 7 or higher you will need to save your file at a lower PDF compatibility level.

How to use live type in motion 4

how to use live type in motion 4

There is a LiveType (or LiveFonts) content section in the Library in Motion 4 (but NOT Motion 5 - LiveType is obsolete, much to my chagrin...) - but you can still import LiveType projects into Motion 4 just as you could in Motion 3 - a simple drag'n'drop from the finder will do; or use Import from the file menu.

How to use table type in bulk collect

Hi experts,
How to use table type in bulk collect see the procedure used( oracle 10g)
and error is
PLS-00597: expression 'REQ_REC' in the INTO list is of wrong type
CREATE OR REPLACE PROCEDURE SAMPLE_SP IS
TYPE TYP_A AS OBJECT
( COLMN1 TABLE1.COLM1%TYPE,
COLMN2 TABLE1.COLM2%TYPE,
COLMN3 TABLE1.COLM3%TYPE
TYPE REC_A IS TABLE OF TYP_A;
REQ_REC A_REC;
CURSOR REQ_CUR IS SELECT COLM1,COLM2,COLM3 FROM TABLE1 WHERE <CONDITION>;
BEGIN
OPEN REQ_REC;
LOOP
EXIT WHEN REQ_REC%NOTFOUND;
FETCH REQ_REC BULK COLLECT INTO REQ_REC LIMIT 1000;
FOR I IN 1..REQ_REC.COUNT
LOOP
<insert statement>
END LOOP;
COMMIT;
END LOOP;
END SAMPLE_SP;
Many thanks,
Kalinga

ok but that is not an issue..
Hi experts,
How to use table type in bulk collect see the procedure used( oracle 10g)
and error is
PLS-00597: expression 'REQ_REC' in the INTO list is of wrong type
CREATE OR REPLACE PROCEDURE SAMPLE_SP IS
TYPE TYP_A AS OBJECT
( COLMN1 TABLE1.COLM1%TYPE,
COLMN2 TABLE1.COLM2%TYPE,
COLMN3 TABLE1.COLM3%TYPE
TYPE REC_A IS TABLE OF TYP_A;
REQ_REC A_REC;
CURSOR REQ_CUR IS SELECT COLM1,COLM2,COLM3 FROM TABLE1 WHERE <CONDITION>;
BEGIN
OPEN REQ_CUR;
LOOP
EXIT WHEN REQ_REC%NOTFOUND;
FETCH REQ_REC BULK COLLECT INTO REQ_REC LIMIT 1000;
FOR I IN 1..REQ_REC.COUNT
LOOP
<insert statement>
END LOOP;
COMMIT;
END LOOP;
END SAMPLE_SP;
Many thanks,
Kalinga
Message was edited by:
Kalinga

How to use Reference type of Data Element

Hi guys, is there anyone could give me a trace how to use reference type of data element.
More details i'm going to reach is:
I create 2 tables:
eq.
1. table ZFIRST has field X with data element ZFX (Data element i declared).
2. table ZSECOND has field Y.
Here at field Y (second table) I'm going to declare a new data element say it ZFY, but in ZFY I'm going to use the data element as i declared before (ZFX). Is it possible if I do it using reference type data element (SE11)?
I already did this way, but I got error :
Field Y: Reference ZFX to class w/o interface cannot be used in DB table ZSECOND
What does it mean?. Did I miss something about using reference data element type?.
This error occurs when I activate ZSECOND table. However in creating ZFY (reference) to data element ZFX, there is no error occur.
The point is I need to RE-declared existing data element and ot put existing data element(ZFX) to my current table (ZSECOND).
Any helpful will be highly appreciated.
Thanks.
Edited by: dinivian dondi on Nov 4, 2010 8:30 AM

Field Y: Reference ZFX to class w/o interface cannot be used in DB table ZSECOND
What does it mean?. Did I miss something about using reference data element type?.
Apparently system doesn't allow you to type a transparent table field with deep type. This refers to references and tables types as components. The RDBMS (Relational DB Management System) cannot interpret this componenets correclty and mapp them to TABLEs in DB.
So I am affraid you won't be able to type table component with reference to other data element.
The point is I need to RE-declared existing data element and ot put existing data element(ZFX) to my current table (ZSECOND).
Sorry but I don't get it, could you please explain this more clearly. Maybe then we can think of some workaround for you.
Regards
Marcin

How to use time stretch

Hello
Please...; I don't know how to use time stretch. When i select a music from a cd and import it in garage band. I change the tempo to accelarate but i can hear no change ... Would please help me and tell me if there is anyway. Thank you .... Olivier

olivier Bellili wrote:
Hello
Please...; I don't know how to use time stretch.
technically GB has no "time stretch" tools
I change the tempo to accelarate but i can hear no change
tempo change is different, and easy:
http://www.bulletsandbones.com/GB/GBFAQ.html#changetempo
(Let the page FULLY load. The link to your answer is at the top of your screen)

How to use time capsule for wireless back-up but not internet?

Hello,
I have a tower and recently a laptop at work. The tower is connected to our local network with an ethernet cable and the laptop with wireless. So, the internet connection is fine for both.
I was hoping to use my time capsule to do time machine backups on my laptop. Do you have any advice on how to configure this? I do not want to use the time capsule to extend my Internet, as I believe my work I.T. would prefer to handle all access to their network.
Perhaps there is some documentation about doing this that you could point me to? I have not been able to find it.
Thank you for your help.

Your original question was How to use Time Capsule for wireless back-up but not Internet?
There is no reason for you to connect the tower....or anything else...using Ethernet if your goal remains that same as you stated.
If you are asking if you can backup the Tower using Ethernet, and not wireless, then you can connect the tower to one of the LAN <-> ports on the Time Capsule....not the WAN port.
Yes, it appears to work without plugging into my tower.
Correct, it will work.
I just have to select the network that it created. Of course, I have no access to the Internet while this is happening and it can not auto backup, unless I am on that wireless signal.
As I stated, that is the downside to trying to back up without an Internet connection. You have to establish another network...and backup over that network.
If you are asking if you can stay connected to the work network while also backing up to your non-Internet "private" network, that is not possible.

How to use time machine to back up

how to use time machine to back up files

Welcome to the Apple Support Communities
See > http://support.apple.com/kb/ht1427
To set up Time Machine, open System Preferences > Time Machine > Select Disk, and choose the external disk you want to use to make the backups. Time Machine will start making its first backup just after selecting your external drive.
If you have more questions about Time Machine, see this website > http://pondini.org

How to use Time Capsule via INTERNET WITH WINDOWS 7 SMB Cloud

how to use Time Capsule via INTERNET WITH WINDOWS 7 SMB Cloud

Get a vpn router.. I have no idea where you are in the world but you can find reasonable stuff for not too much money or even a general router that takes third party firmware like dd-wrt can run openvpn.
Set up the vpn router in place of the TC, as the main router in the network. Simply bridge the TC and place it behind the router. It will be accessible as part of the network via the vpn.
This is the only safe way to do it via windows.
http://www.dyncommunity.com/questions/18132/accessing-time-capsule-from-windows- 7-over-the-int.html
If you google around I have seen posts about how to access TC by port forwarding SMB on the TC.. using a different port.. To me this is going to slow down the hackers by a day or two.. then they will discover the open port and access your network.. not just the TC.. they now have SMB access to everything. Don't do it. There is very little security on SMB.

How to use two types of fonts in a richtextdocument

hello,
i want to print a barcode and some text into a richtextdocument
example:
this.richTextBox1.AppendText("\n");
Font f1 = new Font("3 of 9 Barcode", 50);
this.richTextBox1.Font = f1;
this.richTextBox1.AppendText("*1234554*");
Font f2 = new Font("Arial", 20);
this.richTextBox1.Font = f2;
this.richTextBox1.AppendText("fooo");
but it always uses the second one?
how can i resolve this?
i want to use two types of fonts in the same rich text document.
thank you very much!!

Select some text and then set the SelectionFont property for each selection, e.g.:
this.richTextBox1.AppendText("\n");
this.richTextBox1.AppendText("*1234554*");
richTextBox1.SelectionStart = 1;
richTextBox1.SelectionLength = 9; //End of first word
richTextBox1.SelectionFont = new System.Drawing.Font("Tahoma", 10);
this.richTextBox1.AppendText("fooo");
richTextBox1.SelectionStart = 10;
richTextBox1.SelectionLength = 4;
richTextBox1.SelectionFont = new System.Drawing.Font("Arial", 20);
Please remember to close your threads by marking helpful posts as answer and then start a new thread if you have a new question.

How to use true type font in smartform with ECC6

hi,expert:
I want to use true type font "Comic Sans MS.ttf".
I upload this font file by SE73 named ZTT2I.
In SE73.. select the Radio button "Font Families" And click on the "True type Font Installation" button. click the font attribute ITALIC。
Our print device is LP01 and driver is CNSAPWIN
when I create a new style in smartform using the font ZTT, in preview window the font still like other font.
Our system is ECC6, SAP_BASIS 700 level0017 packeg SAPKB70017
how can I solve this problem?
thaks a lot

the ABAP forum administrator take this question to netweaver forum.
Now when I create smartfrom in language EN，it can output correct style of that font.
But if the smartform is base on language ZH, the output is not correct.
why? How to solve it?
thanks a lot

I have a LaCie external hard disk. I do not know how to retrieve photos from iphoto that have disappeared. I do not know how to use Time Machine

I have a LaCie external hard drive. I also have Time Machine. I somehow have "lost" almost all my 5,000+ photos from iPhoto 8.1.2. I would appreciate someone giving me directions on how to retrieve the photos from the external hard drive or Time Machine.
The last thing that I did that is different from my normal routine was to trash duplicate music tunes from iTunes. I cannot figure out how that would have caused my photos to disappear.
Thanks in advance for any assistance.
Marilyn

I remember being cautioned to never do anything with the iPhoto Library. Should I have clicked on the iPhoto Library and then Restore?
I do not know "how" items are being placed in the LaCie external drive, just that it shows a backup running about every hour. I have taken a snapshot of the Time Machine Preferences I would you to see. Maybe that would answer this question.
In March 2011 I had to have hard drive on my iMac replaced. I had been using a Seagate external drive for backups. However I was not using Time Machine. When the Apple guru was helping me restore all my files etc on the new hard drive he was not familiar with Seagate and recommended I purchase this LaCie and use Time Machine. I never had any problem retrieving items from the Seagate backup. It was very straightforward. As I mentioned previously, I just don't have a clue with the LaCie and Time Machine.
I hope this is not TMI.
Marilyn

How to use time machine to replace the current iMovie for one a few weeks ago?

I have a movie in iMovie that somehow became unusable. The size says it is 10GB when it should only be about 1GB. I have been to the Genius Bar for a total of 4 hours and the only solution we can find is to REMAKE the entire movie. They say that one or more of my movie clips must have imbedded data that it shutting the whole iMovie program down. They say there is no way to know which clip is causing the problem. I really don't want to remake the entire 2 hour movie. I tried to use time machine and found my movie from about 3 weeks ago (before it ballooned to 10GB--so I guess before I added the bad clip) and I just wanted to replace my current one with this version and just fill in the last 3 weeks of data. However I can't seem to do this. Does anyone know how to do this using iMovie '08?

sheri69 wrote:
I tried to use time machine and found my movie from about 3 weeks ago (before it ballooned to 10GB--so I guess before I added the bad clip) and I just wanted to replace my current one with this version and just fill in the last 3 weeks of data. However I can't seem to do this. Does anyone know how to do this using iMovie '08?
You don't do it with iMovie, but with Time Machine.
Quit iMovie, then locate and select the file you want to restore in your backups via the "Star Wars" display and click the Restore button. See #15 in Time Machine - Frequently Asked Questions.

How to use Time Machine/Migration Assistant

I have a 2008 Mac Pro that died. I now have a 2010 Mac Pro. The 2010 Mac Pro only has the original Apple software installed so far (updated to 10.6.8).
I have a Time Machine backup drive from the 2008 Mac, as well as an additional hard drive that may contain all or most of the data from the now dead 2008 machine.
Presently, I must use OS 10.6.8 because of my need to run some legacy software. How do I use Time Machine from my 2008 Mac Pro to get my items on the 2010 Mac Pro?

Here is another point of view:
Setting-up a new Mac from an old one, its backups, or a PC
And another speedup to consider at this juncture:
User Tip: Creating a lean, fast Boot Drive

How to use Time Machine before and after installing a new hard drive

So basically I'm buying a new hard drive for my Macbook pro and I have a lot of files on my computer that I would like to save. I have never used Time Machine before so I need help on how to set it up before AND after installing the harddrive so my files get transferred onto the new hard drive. Thanks in advance

wjosten wrote:
Me, I would never use Time Machine to do this. What I'd suggest you do is get an exterior enclosure for your new drive. Then use either Carbon Copy Cloner or SuperDuper to clone your existing drive to your new drive. Once done, verify your clone is bootable & all of your data present. Then swap drives & use your old drive for Time Machine backups(after erasing it). Then get another drive & exterior enclosure to regularly clone your new drive to.
Unless he was swapping for a lower capacity HDD or to a lower capacity SSD, then the old drive would make a lousy Time Machine disk. However, whenever I swap out a disk I do exactly what you do. CCC to get the ol drive onto a new one. Test by starting up to the new (but still external drive). Then replace the internal drive.
I usually just sell the old drive on eBay. My Time Machine backup is always 2X the size of the internal drive, which I believe is a bit above recommendations, but works for me. The price of large external drives is almost the same as smaller internal ones.

How to use TIMS type KF

Similar Messages

Maybe you are looking for