How to use Tomcat for naming services

Hi,
I want to use Tomcat server for a naming service,but how??.
What i want to do is
It will register 2 services to a the naming server.
Later lookup for it from another code.
I want to know how i can register the same using Tomcat...
Thanks in Advance
Mandrake

http://tomcat.apache.org/tomcat-5.0-doc/jndi-resources-howto.html

Similar Messages

  • How to use the default database service name on creating procedure for data

    how to use the default database service name on creating procedure for datagaurd client failover ??? all oracle doc says create a new service as below and enable at DB startup. but our client is using/wanted database default service to connect from application on the datagaurd environment (rac to non rac setup).please help.
    Db name is = prod.
    exec DBMS_SERVICE.CREATE_SERVICE (service_name => 'prod',network_name =>'prod',failover_method => 'BASIC',failover_type => 'SELECT',failover_retries => 180,failover_delay => 1);
    says already the service available.
    CREATE OR REPLACE TRIGGER manage_dgservice after startup on database DECLARE role
    VARCHAR(30);BEGIN SELECT DATABASE_ROLE INTO role FROM V$DATABASE;
    IF role = 'NO' THEN DBMS_SERVICE.START_SERVICE('prod');
    END IF;
    END;
    says trigger created, but during a swithover still the service is listeneing on listener.
    tns entry.
    prod =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (LOAD_BALANCE = YES)
    (ADDRESS = (PROTOCOL = TCP)(HOST = prod1)(PORT = 1521))
    (ADDRESS = (PROTOCOL = TCP)(HOST = prod2)(PORT = 1521)) ---> primary db entry
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = proddr)(PORT = 1521)) --> DR DB entry
    (CONNECT_DATA =
    (SERVICE_NAME = prod)
    thanks in advance.
    Edited by: 854393 on Dec 29, 2012 11:52 AM

    Hello;
    So in the example below replace "ernie" with the alias you want the client to use.
    I can show you how I do it :
    First an entry need to be added to the client tnsnames.ora that uses a SERVICE_NAME instead of a SID.
    ernie =
    (DESCRIPTION =
        (ADDRESS_LIST =
           (ADDRESS = (PROTOCOL = TCP)(HOST = Primary.host)(PORT = 1521))
           (ADDRESS = (PROTOCOL = TCP)(HOST = Standby.host)(PORT = 1521))
           (CONNECT_DATA =
           (SERVICE_NAME = ernie)
    )Next the service 'ernie' needs to be created manually on the primary database.
    BEGIN
       DBMS_SERVICE.CREATE_SERVICE('ernie','ernie');
    END;
    /After creating the service needs to be manually started.
    BEGIN
       DBMS_SERVICE.START_SERVICE('ernie');
    END;
    /Several of the default parameters can now be set for 'ernie'.
    BEGIN
       DBMS_SERVICE.MODIFY_SERVICE
       ('ernie',
       FAILOVER_METHOD => 'BASIC',
       FAILOVER_TYPE => 'SELECT',
       FAILOVER_RETRIES => 200,
       FAILOVER_DELAY => 1);
    END;
    /Finally a database STARTUP trigger should be created to ensures that this service is only offered if the database is primary.
    CREATE TRIGGER CHECK_ERNIE_START AFTER STARTUP ON DATABASE
    DECLARE
    V_ROLE VARCHAR(30);
    BEGIN
    SELECT DATABASE_ROLE INTO V_ROLE FROM V$DATABASE;
    IF V_ROLE = 'PRIMARY' THEN
    DBMS_SERVICE.START_SERVICE('ernie');
    ELSE
    DBMS_SERVICE.STOP_SERVICE('ernie');
    END IF;
    END;
    /lsnrctl status - should show the new service.
    When I do this the Database will still register with the listener. I don't give that to the clients. That one will still be available but nobody knows about it. Meanwhile "ernie" moves with the database role.
    So in my example the default just hangs out in the background.
    Best Regards
    mseberg
    Edited by: mseberg on Dec 29, 2012 3:51 PM

  • Install Sun ONE Directory Server 5,2 & how to use it for authenticate user

    Good afternoon, Excuse, are newbie in the scope I am learning and putting desire to him, this in my situation I am trying to install Sun ONE Directory Server 5,2 since I understand that this it is application LDAP for Solaris, ok I want to install it to authenticate user against the system, that is to say, to be able to acces the server entering with a created user from the data base of LDAP and make think user that his created in the system. But the documentation that I finds indicates the installation of Sun ONE Directory Server 5,2 but it not clearly about how to use it for authentication. Some one have any manual step by step of Sun ONE Directory Server 5,2 installation and how to make it for authentication systems users.
    I read the forum seeking for anwser and i get confuse
    Thanks for the help and sorry for any inconvenient
    Message was edited by:
    Aku_28
    Message was edited by:
    Aku_28

    I think that I found the Sun endorsed book locations for using LDAP accounts that don't use authentication besides "crypt". I now can use an account with a "ssha" password. It can be more than 8 characters long.
    Chapter 14 System Administration Guide: Naming and Directory Services
    Read page 201 which is the pam.conf file pam_ldap setups. I edited my "/etc/pam.conf" file to reflect this
    Chapter 7 Directory Server 5.2 2005Q4 - Administration Guide
    Read page 316-318 which has a graphical technique to specify password syntax. I set it up and then tried the password by running "su - brahms". It now requires a longer password than 8 characters and it is set up to use "ssha" for that UID entry "brahms".

  • How to activate trace for web services

    Hi Experts,
    How to activate trace for web services in SOAMANAGER.
    We are not able to view the Payload trace of the error logs.
    Can anyone please let me know how to go about this???
    Regards,
    Ashwini

    Hi Ashwini,
    The thread below might be useful to you:
    [SOAMANAGER - Get the XML generated;
    Regards, Trevor

  • How to generate client for GetFile service of Webcenter Content Management.

    How to generate client for GetFile service of Webcenter Content Management.
    Downloaded file : GetFile.wsdl
    <?xml version="1.0" encoding="utf-8" ?>
    - <definitions xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:s="http://www.w3.org/2001/XMLSchema" xmlns:s0="http://www.stellent.com/GetFile/" targetNamespace="http://www.stellent.com/GetFile/" xmlns="http://schemas.xmlsoap.org/wsdl/">
    - <types>
    - <s:schema elementFormDefault="qualified" targetNamespace="http://www.stellent.com/GetFile/">
    - <s:element name="GetFileByID">
    - <s:complexType>
    - <s:sequence>
    <s:element minOccurs="0" maxOccurs="1" name="dID" type="s:int" />
    <s:element minOccurs="0" maxOccurs="1" name="rendition" type="s:string" />
    <s:element minOccurs="0" maxOccurs="1" name="extraProps" type="s0:IdcPropertyList" />
    </s:sequence>
    </s:complexType>
    </s:element>
    - <s:element name="GetFileByIDResponse">
    - <s:complexType>
    - <s:sequence>
    <s:element minOccurs="0" maxOccurs="1" name="GetFileByIDResult" type="s0:GetFileByIDResult" />
    </s:sequence>
    </s:complexType>
    </s:element>
    - <s:complexType name="GetFileByIDResult">
    - <s:sequence>
    <s:element minOccurs="0" maxOccurs="unbounded" name="FileInfo" type="s0:FileInfo" />
    <s:element minOccurs="0" maxOccurs="1" name="downloadFile" type="s0:IdcFile" />
    <s:element minOccurs="0" maxOccurs="1" name="StatusInfo" type="s0:StatusInfo" />
    </s:sequence>
    </s:complexType>
    - <s:element name="GetFileByName">
    - <s:complexType>
    - <s:sequence>
    <s:element minOccurs="0" maxOccurs="1" name="dDocName" type="s:string" />
    <s:element minOccurs="0" maxOccurs="1" name="revisionSelectionMethod" type="s:string" />
    <s:element minOccurs="0" maxOccurs="1" name="rendition" type="s:string" />
    <s:element minOccurs="0" maxOccurs="1" name="extraProps" type="s0:IdcPropertyList" />
    </s:sequence>
    </s:complexType>
    </s:element>
    - <s:element name="GetFileByNameResponse">
    - <s:complexType>
    - <s:sequence>
    <s:element minOccurs="0" maxOccurs="1" name="GetFileByNameResult" type="s0:GetFileByNameResult" />
    </s:sequence>
    </s:complexType>
    </s:element>
    - <s:complexType name="GetFileByNameResult">
    - <s:sequence>
    <s:element minOccurs="0" maxOccurs="unbounded" name="FileInfo" type="s0:FileInfo" />
    <s:element minOccurs="0" maxOccurs="1" name="downloadFile" type="s0:IdcFile" />
    <s:element minOccurs="0" maxOccurs="1" name="StatusInfo" type="s0:StatusInfo" />
    </s:sequence>
    </s:complexType>
    - <s:complexType name="FileInfo">
    - <s:sequence>
    <s:element minOccurs="0" maxOccurs="1" name="dDocName" type="s:string" />
    <s:element minOccurs="0" maxOccurs="1" name="dDocTitle" type="s:string" />
    <s:element minOccurs="0" maxOccurs="1" name="dDocType" type="s:string" />
    <s:element minOccurs="0" maxOccurs="1" name="dDocAuthor" type="s:string" />
    <s:element minOccurs="0" maxOccurs="1" name="dSecurityGroup" type="s:string" />
    <s:element minOccurs="0" maxOccurs="1" name="dDocAccount" type="s:string" />
    <s:element minOccurs="0" maxOccurs="1" name="dID" type="s:int" />
    <s:element minOccurs="0" maxOccurs="1" name="dRevClassID" type="s:int" />
    <s:element minOccurs="0" maxOccurs="1" name="dRevisionID" type="s:int" />
    <s:element minOccurs="0" maxOccurs="1" name="dRevLabel" type="s:string" />
    <s:element minOccurs="0" maxOccurs="1" name="dIsCheckedOut" type="s:boolean" />
    <s:element minOccurs="0" maxOccurs="1" name="dCheckoutUser" type="s:string" />
    <s:element minOccurs="0" maxOccurs="1" name="dCreateDate" type="s:string" />
    <s:element minOccurs="0" maxOccurs="1" name="dInDate" type="s:string" />
    <s:element minOccurs="0" maxOccurs="1" name="dOutDate" type="s:string" />
    <s:element minOccurs="0" maxOccurs="1" name="dStatus" type="s:string" />
    <s:element minOccurs="0" maxOccurs="1" name="dReleaseState" type="s:string" />
    <s:element minOccurs="0" maxOccurs="1" name="dFlag1" type="s:string" />
    <s:element minOccurs="0" maxOccurs="1" name="dWebExtension" type="s:string" />
    <s:element minOccurs="0" maxOccurs="1" name="dProcessingState" type="s:string" />
    <s:element minOccurs="0" maxOccurs="1" name="dMessage" type="s:string" />
    <s:element minOccurs="0" maxOccurs="1" name="dReleaseDate" type="s:string" />
    <s:element minOccurs="0" maxOccurs="1" name="dRendition1" type="s:string" />
    <s:element minOccurs="0" maxOccurs="1" name="dRendition2" type="s:string" />
    <s:element minOccurs="0" maxOccurs="1" name="dIndexerState" type="s:string" />
    <s:element minOccurs="0" maxOccurs="1" name="dPublishType" type="s:string" />
    <s:element minOccurs="0" maxOccurs="1" name="dPublishState" type="s:string" />
    <s:element minOccurs="0" maxOccurs="1" name="dDocID" type="s:int" />
    <s:element minOccurs="0" maxOccurs="1" name="dIsPrimary" type="s:boolean" />
    <s:element minOccurs="0" maxOccurs="1" name="dIsWebFormat" type="s:boolean" />
    <s:element minOccurs="0" maxOccurs="1" name="dLocation" type="s:string" />
    <s:element minOccurs="0" maxOccurs="1" name="dOriginalName" type="s:string" />
    <s:element minOccurs="0" maxOccurs="1" name="dFormat" type="s:string" />
    <s:element minOccurs="0" maxOccurs="1" name="dExtension" type="s:string" />
    <s:element minOccurs="0" maxOccurs="1" name="dFileSize" type="s:int" />
    <s:element minOccurs="0" maxOccurs="1" name="CustomDocMetaData" type="s0:IdcPropertyList" />
    </s:sequence>
    </s:complexType>
    - <s:complexType name="StatusInfo">
    - <s:sequence>
    <s:element minOccurs="0" maxOccurs="1" name="statusCode" type="s:int" />
    <s:element minOccurs="0" maxOccurs="1" name="statusMessage" type="s:string" />
    </s:sequence>
    </s:complexType>
    - <s:complexType name="IdcPropertyList">
    - <s:sequence>
    <s:element minOccurs="0" maxOccurs="unbounded" name="property" type="s0:IdcProperty" />
    </s:sequence>
    </s:complexType>
    - <s:complexType name="IdcProperty">
    - <s:sequence>
    <s:element minOccurs="0" maxOccurs="1" name="name" type="s:string" />
    <s:element minOccurs="0" maxOccurs="1" name="value" type="s:string" />
    </s:sequence>
    </s:complexType>
    - <s:complexType name="IdcFile">
    - <s:sequence>
    <s:element minOccurs="0" maxOccurs="1" name="fileName" type="s:string" />
    <s:element minOccurs="0" maxOccurs="1" name="fileContent" type="s:base64Binary" />
    </s:sequence>
    </s:complexType>
    </s:schema>
    </types>
    - <message name="GetFileByIDSoapIn">
    <part name="parameters" element="s0:GetFileByID" />
    </message>
    - <message name="GetFileByIDSoapOut">
    <part name="parameters" element="s0:GetFileByIDResponse" />
    </message>
    - <message name="GetFileByNameSoapIn">
    <part name="parameters" element="s0:GetFileByName" />
    </message>
    - <message name="GetFileByNameSoapOut">
    <part name="parameters" element="s0:GetFileByNameResponse" />
    </message>
    - <portType name="GetFileSoap">
    - <operation name="GetFileByID">
    <input message="s0:GetFileByIDSoapIn" />
    <output message="s0:GetFileByIDSoapOut" />
    </operation>
    - <operation name="GetFileByName">
    <input message="s0:GetFileByNameSoapIn" />
    <output message="s0:GetFileByNameSoapOut" />
    </operation>
    </portType>
    - <binding name="GetFileSoap" type="s0:GetFileSoap">
    <soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="document" />
    - <operation name="GetFileByID">
    <soap:operation soapAction="http://www.stellent.com/GetFile/" style="document" />
    - <input>
    <soap:body use="literal" />
    </input>
    - <output>
    <soap:body use="literal" />
    </output>
    </operation>
    - <operation name="GetFileByName">
    <soap:operation soapAction="http://www.stellent.com/GetFile/" style="document" />
    - <input>
    <soap:body use="literal" />
    </input>
    - <output>
    <soap:body use="literal" />
    </output>
    </operation>
    </binding>
    - <service name="GetFile">
    - <port name="GetFileSoap" binding="s0:GetFileSoap">
    <soap:address location="http://localhost:7101/_dav/cs/idcplg" />
    </port>
    </service>
    </definitions>

    Hi,
    I would suggest you to check the time recording functionality, see
    details in:
    http://help.sap.com/saphelp_sm70ehp1_sp26/helpdata/en/d5/299631364d4e959
    c6609ca3bc24740/content.htm
    Another possibility is configuring the Service Level Agreement, see
    details in SDN blog:
    Service Desk: SLA configuration hints
    https://weblogs.sdn.sap.com/pub/wlg/24813
    or
    http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/24813
    Thanks
    Regards,
    Vikram

  • How to Use 'uid' for AD Users Without Domain Name For User Log in OAM

    How to Use 'uid' for synchronized Active Directory (AD) Users into Oracle Internet Directory (OID) Without Domain Name For User Logins in OIDDAS and OAM
    We successfully integrated OAM 11g with EBS R12.1.3 Now all the AD user id's stored in fnd_users table as [email protected]
    How can we remove @abc.com
    We are using OID 11g and OAM 11g
    Found the similar note for OID 10G: How to Use 'uid' for AD Users Without Domain Name For User Logins in OIDDAS and SSO [ID 580480.1]
    We are in OID 11g.
    Any help on this greatly appreciated.

    I couldn't find any reference that could be helpful -- Please log a SR and see if this is supported and if the steps are available.
    Thanks,
    Hussein

  • How to use webcam for Yahoo Messenger on MacBook Pro, How to use webcam for Yahoo Messenger on MacBook Pro

    How to use webcam for Yahoo Messenger on MacBook Pro, How to use webcam for Yahoo Messenger on MacBook Pro because it's not working =(

    The cheap & easy way is to just drag the app to the Trash.
    If you want to get all of the associated files use an app deleting app like the free AppCleaner;
    http://www.freemacsoft.net/appcleaner/
    Just drag an app and drop it on the AppCleaner icon in the Dock and it will find and present to you all the files it thinks are associated with the app. You can uncheck any that you want to keep and then let AppCleaner Trash the rest.

  • How to use i for if condition in a for i in loop?

    Hi friends,
    I have a question on how to use i for IF condition in a loop, in order to get an efficient programming and results. Here is outlined SQL:
    cursor is
    select c1,c2,c3 from table1; -- 100 rows returned.
    open cursor
    loop
    fetch c1,c2,c3 into v1,v2,v3;
    for i in 1..3 loop
    if 'v'||i between 90 and 100 then
    v_grade := 'Excellent';
    elsif 'v'||i between 80 and 89 then
    elsif 'v'||i between 50 and 59 then
    end if;
    end loop;
    close cursor;
    This way, I don't need to use a lot of if..then for hard code v1,v2,v3,.... actually I have more v..
    But Oracle gave an error of this usage of 'if 'v'||i' or 'v'||to_char(i).
    Thanks for any advice in advance!

    user508774 wrote:
    Thanks for comments and advices. But I didn't get your inputs clearly. Are you saying I don't need to use PL/SQL to achieve this?Correct. Ronel and John showed you the basic approaches. SQL is not a mere I/O language for making read and write calls. It is a very capable, flexible and powerful language. One can solve a problem with a few lines of SQL code, that will take 100's of lines of PL/SQL or Java code.
    So do not underestimate what can be done in SQL.
    v_cmd := 'UPDATE parts_categ_counts SET w1='||v1||', w2='||v2||...||v9||' WHERE seq='||vseq||';
    EXECUTE IMMEDIATE v_cmd;This code is also wrong. Besides the fact that there is no need for dynamic SQL, this approach creates a brand new SQL statement each loop iteration.
    SQL is source code. It needs to be parsed (compiled). The end result is an executable program that is called a cursor. This cursor needs to be stored in server memory (the SQL Shared Pool in the SGA).
    The problem with your code is that it is slow and expensive - it generates lots of unique SQL statements that need CPU for parsing and server memory for storage.
    These add up to a very significant performance overhead. That is the wrong approach. The correct approach is the same one that you would use in any other programming language.
    Let's say you need to use Java to process a bunch of CSV files - exact same CSV layout used by each file. A file needs to be read, processed, and a log file created.
    Will you write a Java program that loops through the files, for each file found, write a Java program for processing that file, compile it, then execute it?
    Or would you write a Java program that takes the name of the file as input, and then process that file and writes the log file?
    The 2nd approach provides a program that can process any of those CSV files - one simply needs to pass the filename as an input parameter.
    Your code and approach use the 1st method. Not the 2nd. And that is why it is wrong.
    To create a SQL program with parameters is done by using bind variables. Instead of
    v_cmd := 'UPDATE parts_categ_counts SET w1='||v1||', w2='||v2||...||v9||' WHERE seq='||vseq||';
    The following SQL source code should be created:
    v_cmd := 'UPDATE parts_categ_counts SET w1=:v1, w2=:v2 ..., w9=:v9 WHERE seq= :vseq';
    The tokens with the colon prefix (such as :v1), are bind variables. Think of these as the parameters to the SQL cursor.
    The server parses this SQL into a cursor. You can now execute the same cursor over and over again, using different bind variables. (just like the 2nd approach above that one would use in Java)
    In PL/SQL, this is made even easier as you can code native SQL code with PL/SQL code and use PL/SQL variables in it. The PL/SQL compiler is clever enough to do the SQL parsing, variable binding, and cursor execution for you. So in PL/SQL, you would use:
    UPDATE parts_categ_counts SET w1=v1, w2=v2 ..., w9=v9 WHERE seq= vseq;
    Where v1 and the others are PL/SQL variables.
    That all said - PL/SQL is only used for data crunching, when the processing of data is too complex for the SQL language to deal with. And this is very seldom the case.
    The main reason for using PL/SQL it to provide processing flow control, conditional processing and error handling, for SQL code. As the SQL language does not have these features.

  • How to use parathesis for OR and AND OPERATOR...

    oracle 10g
    Hi
    Guys please help how to use parathesis for this below query its giving same output values for all my similar queries
    select count(balance) from balanace_tb
    where kk_code in(111,112,113)
    or
    kk_code in(111,1124,115,116) and sec_id in(50,51,52,53)
    or
    kk_code in(100,164,215,161) and sec_id in(53,51,52,59)
    or
    kk_code not in(100,164,215,162,134) and sec_id in(53,51,52,59)
    or
    kk_code in(100,164,215,16) and sec_id in(53,51,52,59)
    and
    open_date=20130331

    I assume you're looking for something like this?
    select count(balance) from balanace_tb
    where (   kk_code in(111,112,113)
           or (kk_code in(111,1124,115,116) and sec_id in(50,51,52,53))
           or (kk_code in(100,164,215,161) and sec_id in(53,51,52,59))
           or (kk_code not in(100,164,215,162,134) and sec_id in(53,51,52,59))
           or (kk_code in(100,164,215,16) and sec_id in(53,51,52,59))
    and open_date=20130331
    If not, please post some example data, the expected output from that data, and the logic you are expecting to use, as well as posting your database version.
    Re: 2. How do I ask a question on the forums?

  • How to Use BAPI_OUTB_DELIVERY_CHANGE for Batch Split

    Hi Experts, I have the follow delivery:
    Item        Material   Deliv.Qty    Un
    10     739911     2     PQT
    And I want to obtain this:
    Item        Material   Deliv.Qty    Un                            Batch
    10     739911     0     PQT
    900001     739911     1     PQT          ZZ00060
    900002     739911     1     PQT          ZZ00061
    But, after using the Bapi I obtained this:
    Item        Material   Deliv.Qty    Un                            Batch
    10     739911     1,372     PQT
    900001     739911     0,314     PQT          ZZ00060
    900002     739911     0,314     PQT          ZZ00061
    So as you can see the problem is with the "Deliv.Qty". I expected:
    Item        Deliv.Qty
    10            0
    900001     1     
    900002     1     
    But I obtained:
    Item        Deliv.Qty
    10     1,372
    900001     0,314
    900002     0,314
    The parameters that I am using in the Bapi are:
    HEADER_DATA                                   
    DELIV_NUMB = 801174646
    HEADER_CONTROL                                
    DELIV_NUMB = 801174646
    DELIVERY = 801174646
    TECHN_CONTROL
    UPD_IND = U
    ITEM_DATA (three records):   
    DELIV_NUMB = 801174646
    DELIV_ITEM = 000010  
    MATERIAL = 739911  
    FACT_UNIT_NOM = 1   
    FACT_UNIT_DENOM = 1   
    DELIV_NUMB = 801174646  
    DELIV_ITEM = 900001     
    MATERIAL = 739911     
    BATCH = ZZ00060    
    HIERARITEM = 000010     
    USEHIERITM = 1          
    DLV_QTY = 1
    DLV_QTY_IMUNIT = 1
    FACT_UNIT_NOM = 1      
    FACT_UNIT_DENOM = 1      
    DELIV_NUMB = 801174646  
    DELIV_ITEM = 900002     
    MATERIAL = 739911     
    BATCH = ZZ00061    
    HIERARITEM = 000010     
    USEHIERITM = 1          
    DLV_QTY = 1
    DLV_QTY_IMUNIT = 1
    FACT_UNIT_NOM = 1      
    FACT_UNIT_DENOM = 1
    ITEM_CONTROL (three records):
    DELIV_NUMB = 801174646
    DELIV_ITEM = 000010  
    CHG_DELQTY = X
    DELIV_NUMB = 801174646
    DELIV_ITEM = 900001  
    CHG_DELQTY = X
    DELIV_NUMB = 801174646
    DELIV_ITEM = 900002  
    CHG_DELQTY = X
    So I am missing something but I don't know what.
    Can any one help me with this please?
    PD: I have looked the following forums in order to use the Bapi:
    How to Use BAPI_OUTB_DELIVERY_CHANGE for Batch Split
    batch split using BAPI_OUTB_DELIVERY_CHANGE
    Re: Help in BAPI_OUTB_DELIVERY_CHANGE(batch-split)
    BAPI_OUTB_DELIVERY_CHANGE - Batch Splits don't work
    Help for BAPI_OUTB_DELIVERY_CHANGE

    Hey,
    My code is for the inbound delivery but it should work the same.
    Give this a try.
    REPORT  z_delivery_batch_split.
    DATA:header_data  LIKE  bapiibdlvhdrchg,
    header_control  LIKE  bapiibdlvhdrctrlchg,
    delivery  LIKE  bapiibdlvhdrchg-deliv_numb,
    ls_return LIKE bapiret2,
    item_data  TYPE TABLE OF  bapiibdlvitemchg,
    item_control  TYPE TABLE OF bapiibdlvitemctrlchg,
    ls_item_data  LIKE  bapiibdlvitemchg,
    ls_item_control LIKE  bapiibdlvitemctrlchg,
    return TYPE TABLE OF bapiret2 WITH NON-UNIQUE KEY type.
    header_data-deliv_numb = '1800005005'.
    header_control-deliv_numb = '1800005005'.
    delivery = '1800005005'.
    ls_item_data-deliv_numb = '1800005005'.
    ls_item_data-deliv_item = '900001'.
    ls_item_data-material = '000000000020067722'.
    PERFORM create_batch CHANGING ls_item_data-batch.
    ls_item_data-hieraritem = '000010'.
    ls_item_data-usehieritm = '1'.
    ls_item_data-dlv_qty = 80.
    ls_item_data-dlv_qty_imunit = 80.
    ls_item_data-fact_unit_nom = '1'.
    ls_item_data-fact_unit_denom = '1'.
    ls_item_data-sales_unit = 'EA'.
    ls_item_data-base_uom = 'EA'.
    APPEND ls_item_data TO item_data.
    ls_item_data-deliv_numb = '1800005005'.
    ls_item_data-deliv_item = '900002'.
    ls_item_data-material = '000000000020067722'.
    PERFORM create_batch CHANGING ls_item_data-batch.
    ls_item_data-hieraritem = '000010'.
    ls_item_data-usehieritm = '1'.
    ls_item_data-dlv_qty = 60.
    ls_item_data-dlv_qty_imunit = 60.
    ls_item_data-fact_unit_nom = '1'.
    ls_item_data-fact_unit_denom = '1'.
    ls_item_data-sales_unit = 'EA'.
    ls_item_data-base_uom = 'EA'.
    APPEND ls_item_data TO item_data.
    ls_item_control-deliv_numb = '1800005005'.
    ls_item_control-deliv_item = '900001'.
    ls_item_control-chg_delqty = 'X'.
    APPEND ls_item_control TO item_control.
    ls_item_control-deliv_numb = '1800005005'.
    ls_item_control-deliv_item = '900002'.
    ls_item_control-chg_delqty = 'X'.
    APPEND ls_item_control TO item_control.
    break cgavin.
    CALL FUNCTION 'BAPI_INB_DELIVERY_CHANGE'
       EXPORTING
         header_data          = header_data
         header_control       = header_control
         delivery             = delivery
    *   TECHN_CONTROL        = TECHN_CONTROL
       TABLES
    *   HEADER_PARTNER       = HEADER_PARTNER
    *   HEADER_PARTNER_ADDR  = HEADER_PARTNER_ADDR
    *   HEADER_DEADLINES     = HEADER_DEADLINES
         item_data            = item_data
         item_control         = item_control
    *   ITEM_SERIAL_NO       = ITEM_SERIAL_NO
    *   EXTENSION1           = EXTENSION1
    *   EXTENSION2           = EXTENSION2
         return               = return
    *   TOKENREFERENCE       = TOKENREFERENCE
    *   HANDLING_UNIT_HEADER = HANDLING_UNIT_HEADER
    *   HANDLING_UNIT_ITEM   = HANDLING_UNIT_ITEM
    *   PARTIAL_GR_OBJECTS   =          PARTIAL_GR_OBJECTS
    READ TABLE return
    INTO ls_return
    WITH TABLE KEY type = 'E'.
    IF sy-subrc = 0.
       MESSAGE ID ls_return-id TYPE ls_return-type NUMBER ls_return-number WITH ls_return-message_v1 ls_return-message_v2
       ls_return-message_v3 ls_return-message_v4.
    ENDIF.
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
      EXPORTING
        wait          = 'X'.
    break cgavin.
    *&      Form  CREATE_BATCH
    *       text
    *      <--P_LS_ITEM_DATA_BATCH  text
    FORM create_batch  CHANGING p_ls_item_data_batch.
       DATA: ls_bncom TYPE bncom.
       ls_bncom-matnr = ls_item_data-material.
       ls_bncom-werks = 'C333'.
       ls_bncom-lgort = '3000'.
       SELECT SINGLE mtart
         FROM mara
         INTO ls_bncom-mtart
         WHERE matnr = ls_bncom-matnr.
       CALL FUNCTION 'VB_NEXT_BATCH_NUMBER'
         EXPORTING
           matnr                          = ls_bncom-matnr
           werks                          = ls_bncom-werks
           check_batch                    = 'X'
           check_material                 = ''
           message_when_auto              = ' '
           x_bncom                        = ls_bncom
           lock_batch                     = ' '
         IMPORTING
           new_charg                      = p_ls_item_data_batch
         EXCEPTIONS
           no_material                    = 1
           no_plant                       = 2
           material_not_found             = 3
           plant_not_found                = 4
           no_batch_handling              = 5
           batch_exist                    = 6
           no_number                      = 7
           illegal_batch_number           = 8
           interval_not_found             = 9
           object_not_found               = 10
           interval_overflow              = 11
           error_automatic_batch_number   = 12
           cancelled                      = 13
           automatic_batch_num_not_active = 14
           OTHERS                         = 15.
       IF sy-subrc = 0.
         CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
           EXPORTING
             wait = 'X'.
       ENDIF.
    ENDFORM.                    " CREATE_BATCH

  • Need documents for how to use OAM for APPS DBAs

    Hi All,
    Need documents/pdfs, how to use OAM for APPS DBAs.
    Thanks a lot in advance

    Hi,
    For R12 ,refer the Oracle E-Business Suite System Administrator's Guide - Configuration part no:E12893-03 (http://download.oracle.com/docs/cd/B53825_04/current/acrobat/121sacg.pdf)
    For 11i version pls chk :
    Oracle Applications System Administrator's Guide - Configuration (zipped)      B13925-06 (http://download.oracle.com/docs/cd/B25516_18/current/acrobat/115sacg.zip)
    --Rk                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • How to use offset for select-option parameter ?

    Hi experts
    could anybody please let me know how to use offset for select-option parameter. i can able to use offset for table fields, variabiles and all , but don't know how to use for parameters.
    following is my code
    SELECT-OPTIONS: s_prctr  FOR vbsegs-prctr OBLIGATORY.
    here "prctr"  length is 10.
    i'm using two tables  1. vbsegd-bupla
                                    2. vbsegs-prctr
    here prctr+6(4) = bupla.
    "Bupla" length is 4
    SELECT belnr gjahr bukrs bupla sgtxt buzei FROM vbsegd INTO CORRESPONDING FIELDS OF TABLE it_vbsegd FOR ALL ENTRIES IN it_vbkpf
                                                                 WHERE belnr = it_vbkpf-belnr
                                                                   AND gjahr = it_vbkpf-gjahr
                                                                   AND bukrs = it_vbkpf-bukrs
                                                                   AND bupla IN s_prctr.  
    the above statement is not working as prctr and bupla lenths are different. here i want to use offset.
    SELECT belnr gjahr bukrs prctr sgtxt buzei FROM vbsegs INTO CORRESPONDING FIELDS OF TABLE it_vbsegs FOR ALL ENTRIES IN it_vbkpf
                                                                WHERE belnr = it_vbkpf-belnr
                                                                  AND gjahr = it_vbkpf-gjahr
                                                                  AND bukrs = it_vbkpf-bukrs
                                                                  AND prctr IN s_prctr.
    this is working as prctr and s_prctr lengths are equal.
    could anybody please help me out in this.
    Thanks in advance.
    regards
    satish

    Below code will work for you.
    SELECT-OPTIONS: s_prctr  FOR vbsegs-prctr OBLIGATORY.
    RANGES: s_bupla FOR vbsegd-bupla.
    s_bupla[] = s_prctr[].
    DELETE ADJACENT DUPLICATES FROM s_bupla.
    SELECT belnr gjahr bukrs bupla sgtxt buzei FROM vbsegd INTO CORRESPONDING FIELDS OF TABLE it_vbsegd FOR ALL ENTRIES IN it_vbkpf
                                                                  WHERE belnr = it_vbkpf-belnr
                                                                    AND gjahr = it_vbkpf-gjahr
                                                                    AND bukrs = it_vbkpf-bukrs
                                                                    AND bupla IN s_bupla.

  • How to use Tomcat

    Hello friends
    I want to use some functions which are in Java Servlet Specification 2.3.
    I found that I have to use Tomcat for this. Any one who know about it please help, to find where I will get Its setup and required information to run the servlet in this tomcat.
    with thanks
    Vishwajeet

    Hi,
    1. go to: http://jakarta.apache.org/builds/jakarta-tomcat-4.0/release/v4.0.2/bin/
    Download tomcat
    Ex: jakarta-tomcat-4.0.2.zip (Win)
    2. unzip it and put some where, you can rename the dir to C:\tomcat
    3. set the path to CATALINA_HOME tomcat:
    CATALINA_HOME=c:\tomcat
    4. run tomcat:
    %CATALINA_HOME%\bin\startup (Win)
    $CATALINA_HOME/bin/startup.sh (Unix)
    5. go to http://localhost:8080/ on your browser
    ...Enjoy
    Hill

  • How to use stysheet for Swing components?

    Hi,
    Give me a guidence abt how to use Stylesheet for Swing components to crate good looking GUI...........thnx

    thank you for your reply,
    I want to know how many times a component is refreshed. I'm asumming the RefreshCondition attribute gets called everytime a component gets refreshed, hence it could be counted.
    I'm just not sure how to use it.

  • How to use multithreading for asynchronous operation

    hi! i am really new to java, i want to improve the performance of my code, some suggested to implement asynchronous operation using multithreading. Please help me how to use multithreading for asynchronous operation. thanks in advance.

    http://java.sun.com/docs/books/tutorial/essential/threads/
    Note, however, that just making something multithreaded won't necessarily improve performance. You either need multiple CPUs or there needs to be some I/O going on that blocks while something else could be done--other I/O or computing.

Maybe you are looking for

  • Firewire 400 to 800 cable not working

    Hi I have just bought a third party Firewire 400 to 800 cable to connect from my Lacie drive's 800 port to the 400 port on my iBook. When I do this, the drive does not mount at all. Does anyone know why? best Aldo

  • O icloud compartilha com my iphone

    o icloud compartilha com my iphone o localizador do iphone? Quero saber se posso localizar o meu iphone atraves do icloud?

  • Diference b/w normal tables and pl/sql tables

    what is the diference b/w normal tables and pl/sql tables. already we have tables then what is the purpose of pl/sql tables. what are the advantages of pl/sql tables compare nor mal tables.

  • How to install drivers in parallel desktop

    First of all help me to get bootcamp drivers for my MacBook pro retina 15 inch version. They include all the drivers in that pack. I have downloaded bootcamp drivers twice and every time they don't work for my Mac. Also, help me to install those driv

  • ImporterProcessServer.exe has stopped?

    Was just editing a video. I have been editing for about 2 hours now and then this error comes up "ImporterProcessServer.exe has stopped" and is ordering me to close program. When this program stops, editing in Premiere Pro freezes up and video play b