How to use Train Component only with Task-flows as Train Stops

Hi,
I'm using JDeveloper version - 11.1.1.6
I have below requirement:
In a Page when user clicks the button, display the Popup with Train Component. I have to use bounded task flow for each Train Stop. I don't have any views to be used as Train Stops. (Most of the Train Samples have Views / JSFF Fragments as Train Stops and child task flows as Train stops)
Please let me know if I can achieve this.
Any pointers would be helpful.
Thanks
Ravi

Hi,
train stops must be displayed on a view. So if you have a task flow that navigates to other taskflows then it needs to have at least a single view to display the train stops. If you attempt to show. If you enter a task flow then this task flow will have its own train model. So maybe its better to look at what your use case is and why you need to quite called task flows without properly exiting them
Frank

Similar Messages

  • When I use my Delete key to delete a song, I get a pop-up.  This is OK, except the Keep File button is defaulted and I cannot tab or arrow to the "Move to Trash" button, and so i need to use my mouse.  How can I do this only with keyboard?

    When using iTunes on my iMac, I use my Delete key to delete a song and I get a pop-up.  This is OK, except the Keep File button is defaulted and I cannot tab or arrow to the "Move to Trash" (or Cancel) button, and so I need to use my mouse.  How can I do this only with keyboard?

    Huh.. Interesting. I went back to check these proceedures and found there is a difference between using the return key or the space bar as the action command.
    tabbing the blue ring moves the selection and then spacebar takes that action. The return key takes action of only the blue collored button.
    .... learn somting new every day, even if it is somthing I previously forgot

  • How to use JavaMail 1.4 with Oracle Application Server 10g (9.0.4.0.0)

    Hi all,
    I'd like to know if it's possible and how to use JavaMail 1.4 with Oracle Application Server 10g (9.0.4.0.0), Windows version.
    With the following code, I can see that the mail.jar used by the server is the one included in the jdk installation :
    // I'm testing InternetAddress.class because I want to use commons-email-1.2.jar that requires mail.jar 1.4 (or higher) and activation.jar 1.1 (or higher)
    // and I know that inside the commons-email-1.2.jar file, I need to call the InternetAddress.validate() method that throws a java.lang.NoSuchMethodError: javax.mail.internet.InternetAddress.validate()V if it is used with mail.jar 1.2.
    Class cls = javax.mail.internet.InternetAddress.class;
    java.security.ProtectionDomain pDomain = cls.getProtectionDomain();
    java.security.CodeSource cSource = pDomain.getCodeSource();
    java.net.URL location = cSource.getLocation();
    System.out.println(location.toString());
    This code returns : file:/C:/oracle/app/jdk/jre/lib/ext/mail.jar and this mail.jar file has an implementation version number: 1.2
    - I've tried to include my own mail.jar (1.4.2) and activation.jar (1.1.1) files in the war file that I deploy, but it doesn't work (the server still uses the same mail.jar 1.2)
    - I've tried to put the mail.jar (1.4.2) and activation.jar (1.1.1) files in the applib directory of my OC4J instance, but it doesn't work (the server still uses the same mail.jar 1.2)
    - I know that a patch exists : I've read the following document: How to Make Libraries such as mail.jar and activation.jar Swappable ? [ID 552432.1]
    This article talks about the Patch 6514136, but this patch only applies to : Oracle Containers for J2EE - Version: 10.1.3.3.0
    Can you please help me ?
    Thanks in advance for your answers,
    Laurent

    I strongly suggest to upgrade to AS 10.1.3 to get this.
    Think of future support of AS 9.0.4. You will get not critical patch updates anymore.
    --olaf                                                                                                                                                                                                                                                                                                               

  • Possible to use menuBar with task flow based ADF menus?

    Hello -
    I've just worked through the " [Create ADF Menus for Page Navigation|http://www.oracle.com/technology/products/jdev/11/cuecards111/adf_set_43/ccset43_ALL.html] " tutorial. It shows how to create menus based on your task flows.
    My question: is it possible to use the af:menuBar with these menu models (instead of navigationPanes or breadcrumbs) ?
    I am using JDev 11g 11.1.1.1.0
    Thanks.
    Edited by: scott.turnquist on Nov 5, 2009 12:07 PM

    Hi,
    The XML menu model extends the Trinidad TreeModel, which extends Collection model. This allows you to access the hierarchical menu structure so that you can use af:iterator to build a structure to display in a af:menuBar
    Frank

  • How to use digital av adapter with iphone4

    How to use digital av adapter with iphone4

    you can connect it to the iphone4's connector and then you can start an app which support av out like apples video app and then it will display on the tv connected
    the iphone4 don't support mirror though so only apps which support tv out will work with it

  • How to use Calander Component in JSF JSCreater

    i am using the calander component in JSCreter .
    i have one jsp page with a button and a calander component . If i let the calander field blank then the action event of button is fired but if i select some value in calandar field then then click the button then on action is fired
    what can be the reasion .

    I saw the documentation. But it uses com component which has ClassID / GUID. but how to use .net component and I think .net component doesn't maintain any registry information like classid / guid.

  • How to use the class CL_CTMENU with the method DISABLE_FUNCTIONS

    Hi Friends,
    How to de-activate some functions in the Menu bar?
    Eg: - Sales document
                 Create
                 Change
                 Display
    I want to de-activate "Change"
    In other words: - How to use the class CL_CTMENU with the method DISABLE_FUNCTIONS in my program.
    Regards,
    Hari
    Edited by: Bhatlapenumarthy Hari Krishna on Jun 9, 2008 5:22 PM

    Krishna,
    It is not possible to deactivate the CHANGE option in themenu bar using the method disable_functions of cass CL_CTMENU. This method allows you to deactivate only the function codes of the CONTEXT MENU, which is available only when u press the left mouse button.
    U can use the SET PF-STATUS 'XXX' EXCLUDING fcodes option to disable the CHANGE.
    *****Reward points if useful
    Regards,
    Kiran Bobbala

  • How to use Two main windows with in a page in script ?

    Hi any body explain me...
    How to use Two main windows with in a page in script ?
    with  header data in one main window,
    & Item data in other main window.

    HI..,
    u need to go for <b>SPLITTING THE MAIN WINDOW</b> !!!
    Main windows in page windows allow you to format text in multiple columns. Define an area in the page window, in which to position the main windows.
    Here is the procedure !!
    -->Create a page window and assign it to a page.
    Choose <b>Edit --> Main windows</b>.
    A dialog box appears.
    -->Enter values in the fields <b>Area width</b> and A<b>rea height</b> in accordance with the input guidelines for main windows.
    -->Enter values in the fields <b>Spacing</b> and Number in the <b>Horizontal group</b> if you want to use multiple columns. You can ignore the fields in the Vertical group.
    Determine how many columns and line areas are required for label printing. Then enter the corresponding values in the fields in the <b>Horizontal and Vertical groups</b>.
    -->The value in the field Left margin varies from main window to main window if multiple columns are used. The following applies:
    <b>
    Left margin of current column + Window width + Horizontal spacing = Left margin of next column</b>
    In label printing, the field Upper margin also varies from main window to main window:
    <b>
      Upper margin of current main window +  Window height + Vertical spacing = Upper margin of next main window</b>
    -->Enter a value in the field Start position.
    This is a counter. Enter a starting value which is equal to or greater than 1.
    -->The main windows are added to the list.
    -->Save your form.
    reward if it helps u...
    sai ramesh

  • How to use a Web Template with queries from multiple BW Systems?

    Hi all,
    can anybody help me how to use a Web Template with queries (DATA PROVIDER)in it from multiple BW Systems?
    Thanks in advance, best regards
    Frank

    Great! Thanks for the quick response.
    Have you tried this for XMLA datasources created within the EP system also?
    i.e use Web Analyzer to create a view from the XMLA source and use that view within WAD?
    Thanks.

  • How To Use Your Own Router with Out Loosing Verizon's FIOS Services

    How to use your own router with Verizon’s FIOS Service
    First, you need a basic understanding of how FIOS works but unfortunately there are two types of FIOS systems out there. All of the systems utilize a fiber optic cable to bring TV, phone and internet to your location over one optic cable. In addition these systems provide interactivity including widgets, remote DVR, movies on demand and so forth via an IP (Internet Protocol) signal.  Your STB (Set Tip Box) requires both a video and IP signal. The IP signal is necessary for all of the aforementioned interactivity.  The fiber cable terminates at the Optical Network Terminal or ONT for short.  The ONT converts the optics into a digital signal that can be utilized by ones equipment.  From the ONT your video, phone and internet are provided to the location.  This is where things can differ as the internet signal can be provided via a coaxial (MoCA or Multimedia over Coax Alliance) or RJ45 Cat5 (Ethernet) cable.  It is important to identify and understand the differences of these two setups.  In my case I have my internet entering via Ethernet cable, which in my humble opinion makes things a heck of a lot easier.
    How does one tell the difference? In most cases it’s rather simple; just look at the Verizon’s router WAN (Wide Area Network) Port.  Does it have a RJ45 (Ethernet) or Coax (TV cable Cord) going to it? If the router’s WAN port doesn’t have a coaxial connector then one will need to convert the MoCA signal into a usable Ethernet signal that routers understand. The easiest way is to use Verizon’s router as a bridge. In this method the Verizon’s router simply converts the signal and passes it along to your own router. The challenge is to try to maintain the interactivity that FIOS TV provides. Because of this one needs to supply the IP routed signal back to the FIOS router.  There are multiple methods for doing this and I would recommend investigates which one make the most sense.   
    In my particular case the IP signal was provided by Ethernet.  Again there are various ways of installing one’s own router. The hardest is to utilize Verizon’s router as a bridge.  This setup requires configuring Verizon’s router as a bridge and also creating a VLAN (Virtual Local Area Networks). In addition one needs to set up their own router so it will work with the various routing tables and networks. For me this is too complex for the average person and it can be difficult to trouble shoot if something goes wrong. Please consider that Verizon will not support utilizing third party routers.   
    The easier method is to request an Ethernet signal (if you don’t already have one) from their ONT.  I would highly recommend getting your hands on a NIM or Network Interface Module. This device is used to convert Ethernet to Coaxial so it can be fed back to your STBs.  These can be purchased online and Verizon technicians can be a valuable resource with these sorts of acquisition.  At the very least they can point you to the right direction.  Once you have a NIM the rest is rather simple.
    Log into the current Verizon Router.
    Located the router’s MAC address and copy it down.
    Go to the port forwarding section and copy down the Applied Rules. 
    Example:  
    Network Computer/Device: 192.168.1.100:63145
    Application & Ports Forward:  Application UDP Any -> 6347  
    Note: There may be up to three entries for each one of your Set Top Boxes.
    Look at your current device list, typically found on the home screen. Copy down your STB MAC and IP address.
    Example:
    IP-STB1
    Connection Type: Ethernet
    * IP Address: 192.168.1.100
    IP Address Allocation: DHCP
    *MAC Address:                07:73:fFe:ad:8b:3f
    * Things you will need to write down
    Go to the network section and look for the main Ethernet connection.  Select this and then select more setting, typically found at the bottom. Release the current lease.
    Remove the Verizon router
    Install your router
    Connect the NIM by plugging in an Ethernet from one of the routers LAN (Local Area Network) ports to your NIM. Then connect the coax cable, the same cable that was used by Verizon router.
    Set you DHCP routing IP pool to accommodate Verizon’s STB IP’s  (note their IP’s start at 192.168.1.100)
    Go to DHCP section and reserve the STB IP’s by inserting the IP’s and MAC addresses. This shall ensure that nothing else utilizes the same IPs as the STBs thereby preventing IP address conflict.  
    Add the port forwards from Step 5 above.
    Clone Verizon’s Mac Address utilizing the info from step 2
    Finish setting up the router in typical fashion.
    Unplug and re-plugin your STB’s and test functionality.  It’s best to try using a widget or Movie on demand function.
    Note: if the new router can net get an internet signal contact Verizon’s support and have them release the IP and reset the ONT.  
    EVERYTHING should be working at this point.

     3 Go to the port forwarding section and copy down the Applied Rules. 
    Example:  
    Network Computer/Device: 192.168.1.100:63145
    Application & Ports Forward:  Application UDP Any -> 6347  
    Note: There may be up to three entries for each one of your Set Top Boxes.G
    Your display obviously is not like mine as mine does not dosplay the port associated with the ip address
    whatever, the STB's start at 192.168.1.100 and icement by 1 for each
    the port addr's will be 63145 alo incrementing by 1
    there is 1 entry for each in my pf list
    however each ip addr also has a port entry starting at 35000 also incrementing by 1 for each ip addr
    For some unknow reason these are duplicated e.g I appear to have 11 entries exaactly the same for each stb and as the fios services rules have no action switc there is nowhere to delete the extraneous garbage.
    Why do you clone the mac addr??

  • How to use a iPad mini with a projector

    How to use a iPad mini with a projector

    Use an AirPlay compatible device, such as an AppleTV or an AirPlay compatible AVR.

  • How to use Crystal Reports 11 with Visual C++ 2005 ?

    Post Author: compvis
    CA Forum: General
    Hello everyone !
    Plz tell me how to use Crystal Reports XI with Visual C++ 2005 ?
    Thank you so much !

    Moved to .NET SDK forum.
    Need more info, version of the assemblies you are using and the assembly file system version number ( not the same as what you see in the properties of the project.
    As well, what happens if you use OLE DB as a test?
    Thank you
    Don

  • How to use ObjectDataProvider component in WDA

    Hello all,
    I hv an urgent requirement to develop an OADP based application in SAP webdynpro Abap (to fetch tree like structure). i don't know how its possible, but i heard we can use ObjectDataprovider component to do the same.
    Does anybody know how to use "ObjectDataProvider" component in web dynpro abap to develop OADP based Webdynpro abap application, a step by step guide would be very nice. or do i need to fetch data myself using methods in webdynpro.
    any reply will be highly appreciated.
    thanks
    Mani

    Hi,
    Know this is an old post, but for future people:
    In se80, see example Web Dynpro components:
    OADP_EXAMPLE
    OADP_TEST
    Good luck,
    Garth

  • How to use Special value set with Column clause to display addtional column

    hi
    can anyone tell me
    How to use Special value set with Column clause to display addtional column
    how can i use FND POPID and with COLUMN clause ?

    Dear Yaseen,
                To get the value in formula cumulative,after you have created the formula for that particular key figure,go to edit and click on tab "calculations".
    In that select overall result as 'count all values not equal to zero' and single result as 'count all values not equal to zero' .
    And mark the cumulative check box underneath.
    I hope you get the desired result and please do me favour .
    Sumit goomber

  • Can we create application using only bounded task flow ?

    I am new to ADF ..
    can we create application by using only bounded task flow ...?
    one unbounded task flow is necessary for any application ? ....
    i searched on net ..but its not became clear
    Thanks

    I believe that it requires you to have at least one unbounded task flow as the standard entrance point for the application. However, I don't think there is anything stopping you from having the unbounded task flow only have access to your first bounded task flow. However, one of the purposes of the unbounded task flow is to define the different acceptable entrance points to your application.

Maybe you are looking for