How to use TRIM DATA in CFFORM?

How to use TRIM DATA in CFFORM? when data is retrieving from
DATABASE. Wanna rtrim and ltrim while spaces.

Better to trim those values after the form submission.
Once you put them into form,
user may also makes mistake by hitting space, right?
Also, by trimming all form fields after submission, you will
be sure that your DB is clean... no whitespaces on it.
Well unless someone insert data directly onto it :)

Similar Messages

How to use open data set in SAP

Hi SAP Gurus,
        Could anyone help, how to use open data set in SAP.
      I need to upload a file from Application server (ZSAPUSAGEDATA) to internal table (IT_FINAL).
Thanks & Regards,
Krishnau2026

Hi Krishna.
These are the steps you need to follow.
tables: specify the table.
data: begin of fs_...
        end of fs_    " Structure Field string.
data: t_table like
        standard table
                  of fs_...
data:
w_file TYPE string.
data:
fname(10) VALUE '.\xyz.TXT'.
select-options: if any.
PARAMETERS:
p_file LIKE rlgrap-filename.
w_file = p_file.
select .... statement
OPEN DATASET fname FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
*OPEN DATASET fname FOR OUTPUT IN BINARY MODE.
LOOP AT t_... INTO fs_....
write:/ .....
TRANSFER fs_... TO fname.
or
TRANSFER t_... TO fname
ENDLOOP.
CLOSE DATASET fname.
Reward points wisely and if you are benefitted or ask for more detailed explanation if problem not solved.
Regards Harsh.

How to use Jquery Data Grid in HTML

can anyone please tell me how to use JQuery Data grid in my HTML page with example.
I have one HTML page i want the standard JQuery Data Grid with search and pagination functionality.

Guys I have got the solution
thanks a lot
please refer this link for JQGrid
http://www.codeproject.com/Articles/609442/Using-JqGrid-in-ASP-NET

How to use same Data Type and Length for two fields

How to use same data type and length for two fields when using 'FOR ALL ENTRIES IN' in a select statement? For instance the select queries are :
SELECT bukrs gjahr belnr lifnr budat bldat zlspr dmbtr waers shkzg
FROM bsik
INTO TABLE it_bsik
WHERE bukrs = p_bukrs
AND lifnr IN s_lifnr.
IF it_bsik IS NOT INITIAL.
SELECT belnr gjahr awkey awtyp
FROM bkpf
INTO TABLE it_bkpf
FOR ALL ENTRIES IN it_bsik
WHERE belnr = it_bsik-belnr
AND gjahr = it_bsik-gjahr.
IF it_bkpf IS NOT INITIAL.
SELECT belnr gjahr lifnr xblnr
FROM rbkp
INTO TABLE it_rbkp
FOR ALL ENTRIES IN it_bkpf
WHERE belnr = it_bkpf-awkey+0(10)
AND gjahr = it_bkpf-awkey+10(4).
ENDIF.
ENDIF.
Here it gives an error in the 3rd select query that 'When you use the addition "FOR ALL ENTRIES IN itab", the fields "GJAHR" and "IT_BKPF2-AWKEY+10(4)" must have the same type and the same length.'
Kindly clarify.

Hi Saurabh,
Please see the example code that I have developed for you. It will help you solve the problem.
REPORT ZTEST_3 .
tables : BKPF.
data : begin of it_bkpf occurs 1,
         belnr type RE_BELNR,
         awkey type awkey,
         awtyp type awtyp,
         gjahr type GJAHR,
       end of it_bkpf.
data : begin of it_bkpf1 occurs 1,
         belnr type RE_BELNR,
         awkey type gjahr,              " change the data type
         awtyp type awtyp,
         gjahr type GJAHR,
       end of it_bkpf1.
data : begin of it_rbkp occurs 1,
         belnr type BELNR_D,
         gjahr type gjahr,
         lifnr type LIFRE,
         xblnr type XBLNR,
       end of it_rbkp.
select belnr
       awkey
       awtyp
       gjahr
       from bkpf
       into table it_bkpf
       where BUKRS = 'TELH'.
loop at it_bkpf.
it_bkpf1-belnr = it_bkpf-belnr.
it_bkpf1-awkey = it_bkpf-awkey+10(4).           "Here only append the required length.
it_bkpf1-awtyp = it_bkpf-awtyp.
it_bkpf1-gjahr = it_bkpf-gjahr.
append it_bkpf1.
clear it_bkpf1.
endloop.
select belnr
        gjahr
        lifnr
        xblnr
        from RBKP
        into table it_rbkp
        for all entries in it_bkpf1
        where belnr = it_bkpf1-belnr
This is just an example. Change the fields according to your requirement.
Regards
Abhii
Edited by: Abhii on Mar 9, 2011 9:08 AM

How to use Sql data source from Essbase 9.3.1

Hi All,
How to use Sql data source from Essbase 9.3.1 for ASO cube.Are there any rules and limitations for that.
Do we need to create any data source connection for this purpose. If there please let me know the dteps to create that connection.
Regards

Yes you need to create one DSN connection and you have to use DSN name and login details at the time of building/loading of the outline.
Create DSN
Goto Administrative tools -> DataSources (ODBC) and add the DSN name and specify the Server name of SQL and login details and database.
goto data prep editor and click on File Menu and Click on Open SQL option Next window opens.
There you have to enter the details of the DSN connection and SQL query to build/load.
Thanks,
Prathap

How to use cursor data in more than one location in form?

hi all.
is it possible to make cursor as global or public in the form so i can use its data in more than location for testing like in buttons triggers.
for example:
if i declare the following cursor in "WHEN-NEW-FORM-INSTANCE" trigger
CURSOR cur
IS
SELECT ID, NAME
FROM PERSON;how can i use this cursor in other triggers in other buttons in the form?
thanks

kareem wrote:
now i have the old data- from cursor and the new- from tableNo, you have not. When you open the cursor you get the state of the database at the current SCN.
If you
- open your cursor, fetch the data and close the cursor
- update some data
- open your cursor, fetch the data and close the cursor
you will get the updated data from your cursor the second time (unless your update isn't a uncommited autonomous transaction but I wouldn't go down that route).
You will have to save your data somewhere or you might take a look at flashback: http://download.oracle.com/docs/cd/B19306_01/server.102/b14220/consist.htm#i20759
cheers

How to use cursor data in more than one location in the form?

hi all.
is it possible to make cursor as global or public in the form so i can use its data in more than location for testing like in buttons triggers.
for example:
if i declare the following cursor in "WHEN-NEW-FORM-INSTANCE" trigger
CURSOR cur
IS
SELECT ID, NAME
FROM PERSON;how can i use this cursor in other triggers in other buttons in the form?
thanks

kareem wrote:
now i have the old data- from cursor and the new- from tableNo, you have not. When you open the cursor you get the state of the database at the current SCN.
If you
- open your cursor, fetch the data and close the cursor
- update some data
- open your cursor, fetch the data and close the cursor
you will get the updated data from your cursor the second time (unless your update isn't a uncommited autonomous transaction but I wouldn't go down that route).
You will have to save your data somewhere or you might take a look at flashback: http://download.oracle.com/docs/cd/B19306_01/server.102/b14220/consist.htm#i20759
cheers

How to use due date in credit management

hi,
i want to calculate my credits according to net due date
how can i use due date in credit management?
thank you

Not sure what do you mean by "use due date in credit management".
If you want to calculate due date per billing document, for example, for such as customer statement, you may use "BSID-ZFBDT + BSID-ZBD1T" (Baseline date + Cash disc day 1).

How to use Key Date in query

Imagine an invoice was created for a customer on the 1st of January 2008 for £1000
On the 1st of Feb, he paid $300, owing $700
On the 1st of Mar, he paid $450, owing $250
On the 1st of Apr, he paid $250.
If I run an AR report today the 10th of Aug, I would see he owes nothing. What I want to do is to run the report today based on the 2nd of March and see a debt of £250. I dont want to use the posting date in the selection criteria henceI think this is the case when you use a key date but Im not sure how to use this in the query properties of BI7. What Characteristic do I need to specify as time dependant? Is there anything else I should consider?

hi,
Key Date setting is for the 'time dependent' master data.
Lets say u have a Characteristic MATERIAL with a time dependent attribute MATERIAL GROUP as follows.
MATERIAL FROM TO MATERIAL GROUP
ABD 01/01/1995 12/31/2003 X
ABD 01/01/2004 12/31/9999 Y
Depending on what you have for the Keydate, the Material group is selected.
If your key date is, ex, 06/12/2001 there material group is X. Or if key date is 02/15/2005, material group is Y.
If you do not enter any value for keydate, system automatically assumes today' date.
hope it helps..

How to use format-date with the report parameter

Hi all,
How to use the format-date function with this tag,
<?param@begin:P_FROM_DATE?><?$P_FROM_DATE?>
this form date is coming from report parameter and is coming like this 2012/11/01 00:00:00.
So now i need this in DD-MON-YYYY fromat.I tried like this <?param@begin:P_FROM_DATE?><?$format-date:P_FROM_DATE;'DD-MON-YYYY'?>
but its giving error. Can any one pls tell how to convert it to customized date format.
thanks & Regards
Srikkanth.M

Issue solved.
Ref this link
XML date Format

How to use WD data into BSP??

Hi All,
i have senario as,
in my BSP application i am calling WDA application passing url to iframe.
now i want to use the data from WDA application into the BSP...for eg. context data.
how can i use it into BSP application.
please let me know.
Regards,
Chandra

Hi Chandra,
You can't pass the information(Context Data) from WDA to BSP directly so you just store the information in some variables or internal tables use the normal user paramenters like EXPORT & IMPORT or SET and GET parameters. Thgoruhg this way only you can communicate the data between these 2 technologies otherwise you need to save the data in some ztable and use the same table in both technoloes.
I hope i make you clear.
Warm Regards,
Vijay

How to use Changed Data Capture?

Hello,
I want to use CDC to load my DW in real time. I am testing ODI in that mode.
I have two tables:
SRC Employe (empl_ID, name, surname, salaire, age) and TRG Employe( empl_ID, name, surname, CreDate, UpdDate) on SQL Server 2005. I wish to load data from SRC Employe to TRG Employe. I want that this data are charged in real time.
how to do this? I know that I must use OdiWaitForData and OdiWaitForLogData but in ODI documentations, explanations are not sufficient.
how to use OdiWaitForData and OdiWaitForLogData?
thanks in advance
Billyrose

Hello,
but when I created a package and added OdiWaitForLogData, pb began. the step that has OdiWaitForLogData succeed. but my interface failed. the step "Load Data" failed.why?
There is no reason for that. WaitForXXX does not affect the data stored in the CDC infrastructure, but just detects it.
- What type of CDC are you using: simple or consistent set?
- Did your interface used journal data only?
- What error did you get precisely on the "Load Data" task?
Could you tell me how to schedule a package?For scheduling, I think you should have a look at "Generating a Scenario" in the user manual. under the generated scenario node, you'll see the schedule node and you can start scheduling from here.
Regards,
-FX

How to use '*' as data Element in the NTE(Edi 850) Segment

Hi All,
I am facing a field level error while using '*' in EDI 850 (NTE segment). '*' is also used as Data Element.
For Eg: NTE*GEN*My Text *goes here
Here, NTE02 should be My Text *goes here. So, how can I use "*" here without changing anything in the EDI message?
I have asked this question before
http://social.msdn.microsoft.com/Forums/en-US/1668e8d8-ee99-4d79-961b-8d26f3a496f8/error-while-using-in-the-nte-edi-850-segment-where-is-also-used-as-data-element?forum=biztalkediandas2
The answer in the above forum was to ask client modify the EDI message.
Previously, our client was using a different technology (other than BizTalk) which was working fine with this format. So, they are insisting on this format only.
Thanks,

Sorry, the answer is the same.
It doesn't matter what EDI platform either side is using, the '*' in the field content conflicts with the '*' that is the element delimiter. That is invalid EDI, there is no way around that short of writing a custom EDI parser.
It's not clear if you're sending or receiving this message. But again, it's really doesn't matter.
1. Change the Element Delimiter to something other than '*'. < or > are not uncommon.
2. If you are receiving the EDI, create a custom Pipeline Component that "handles" NTE02 either by replacing the '*' with a substitute char or deleting it.
3. If you are receiving, you could add extra elements to NTE to accommodate extra fields (since that's how the parser will see them). Then you can join them again in a Map.

How to use the data that we got after successful execution of a Bapi

I have created a simple Webdynpro application to execute a user defined Bapi and that was executing successfully but the next step when i want to use the data that which i have retrieved from that Bapi i am facing problem.I am unable to use that particular data
My idea is to use that data and again i want to filter that particular data which i got from the Bapi execution with out calling another Bapi
Ex: I wrote a user defined Bapi to retrieve flight details if i enter the id of the particular airline
Then i executed my webdynpro application and i am able to get the output
from that output i want a particular flight details if i choose the City name i.e. the details related to that particular city which i choose

Hi Praveen,
Thanks for the Help,
I am working with the same scenario which was there in the PDF sent by you but in that document it was directly allowing us to click on the output which we got after executing a Bapi, but here when i am executing i didn't know the procedure how to make use of the data which we got after execution and displaying it in other view
can we write any code to access that particular data that we got after executing that flight scenario and do some operations on that particular fields
thanks and regards
Raghu

How to use save data in Background by using standard task?

Hi,
I have worked with PD Process for PD. I try to find background process to run after manager approve. I use the standard task 17900108 but it seem does not work. What should I did before I use this standard task?
Please help me out how to use this standard task.
Thanks a lot,
Regards,
Visut

Hi All,
Thanks for your reply. Actually the key word of my case is I put the class in Program Exit instead of let it blank. The standard task that I use is 17900108.
I can use it to update data now....
But it seem does not update to DPF (Digital Personal File). Anyone has idea why it does not?
Thanks again.
Regards,
Visut

How to use TRIM DATA in CFFORM?

Similar Messages

Maybe you are looking for