How to use two different network cards on RT?

Hi everyone... I'm currently working on a project where I have to deal with the issue mentioned in the thread's topic: I have a PC with RT LabVIEW that has to be able to establish network connections using two different network cards. One will be used to connect via TCP/IP with a host computer that will show the data transmitted through shared variables; the other will communicate with another PC through Modbus protocol. The key is that each communication is done through a separate network card.
So far I haven't been able to figure out how to configure both things to happen. Does anyone know how to do this? Any tips will help.
For the RT communication I'm using a standard RT project, with the RT PC being given one of the IPs, and for the Modbus part, I created an I/O server with a master and a slave. Separately everything works fine, but when I get them together it simply won't work.
Thanks for your help!
Solved!
Go to Solution.

Sorry it took me so long to answer, I've been busy lately....I've found a solution to the problem I mentioned, and just in case anyone has similar problems in the future, I'll shortly describe what happened.
As Caseyw suggested, it was necessary to enable both network cards through the Measurement and Automation Explorer. The cause of the connections malfunction was actually that I wasn't using the "right" protocol for the Modbus communication, which ran on the secondary adapter. The solution was to use the URL protocol with the correct path on the field, addressing the right IP address. To avoid making this post a mixture of topics, I won't elaborate futher, but I got the gist of it, so if anyone is having similar problems whether it is working with several network cards or with Modbus communication protocols, feel free to contact me, I'll be glad to help.
Thanks

Similar Messages

How to use two different versions of Firefox at the same time on Snow Leopard?

I recently upgraded to Firefox 4.0 on my 27" iMac running Snow Leopard 10.6.7.
Previously, I was using Google's "Page Speed" along with Firebug in Firefox 3.6.15 to optimize images in my web pages, and to find other areas to optimize.
Page Speed is not yet compatible with Firefox 4.0. I wrote to Google about this some time ago -- no answer yet.
If I run Firefox 3.6.15 in order to use Page Speed, I run into a few problems afterward when I start using Firefox 4.0 again, since they both use the same "Firefox" folder in my "Application Support" folder.
How can I set it up so that I can have two separate "Firefox" folders in my "Application Support" folder?
Or is there an easier way to use two different versions of Firefox simultaneously, even if one has extensions and/or plug-ins installed which are not compatible with the other version?
Thanks for a great browser!

Please disregard my question. I just conducted more web search and learned how to use Firefox's profile manager in order to make a separate profile for Firefox 3.6.15.
You can find instructions on this page:
http://support.mozilla.com/en-US/kb/Managing%20profiles#os=mac&browser=fx35
'''A small tip:'''
If your Firefox app is named anything other than "Firefox" -- say for example "Firefox 3.6.15" -- when you follow the instructions at the above link, make sure you escape the blank space that is before the version number by adding a backward slash before it, when you type the command string in the Terminal. In other words, in that string, you should use this:
Firefox\ 3.6.15
I hope that helps someone.
WW

SBO - How to use two different Stock Account within the same Item Group

Hi,
I'm currently stuck within one of my implementation.
I'm deploying the same solution worldwide which worked pretty well until now. All the items are connected to an item group, with a unique GL account, supposed to book at the same time the good receipt and the good issue (Balance-Sheet Account = 14xxxxx).
My new unit is willing to use two different GL accounts when performing its stock entry (let say 14xxx10) and another GL account for the good issue, let say 14xxx20.
Do you have any clue so i can please them and keep using at the same time the item group ?
Thanking you in advance
Stephane

Hi,
In fact, we use the GL account as the HQ Account (Reporting Account) while the "Export Code" will be used to store the local GL Account (greek account).
As such, we can, somehow handle two different chart of accounts.
In my reporting, i'm only using a single GL account for stock movements, while my greek counterparts want to handle two different accounts.
Threfore, i have only two solution since there is normally a one to one relationship between a HQ account and a local account that are :
1 - Duplicate the HQ accounts
In that case, i do respect anytime the one to one relationship. I've got one HQ account for one local account. But how can i put this since i can only handle one single stock account.
2 - I keep my single stock account like this but i won't be managing the possibility to get two different Export Codes.
Regards
Stephane

SLI - Can I use two different video card versions for SLI?

Hello,
Can I use two different generations of MSI video cards that implement the same GPU for SLI?
The two video cards are:
MSI N260GTX-T2D896-OCv2 GeForce GTX 260 896MB <-- What I currently have
MSI N260GTX-T2D896-OCv3 GeForce GTX 260 896MB
MSI N260GTX-T2D896-OCv4 GeForce GTX 260 896MB
The main difference between these three seems to be that the OCv3 has two fans and a different heatsink than the OCv2. The OCv4 has one fan like the OCv2 and but it is located in a different location and some weird spikey heatsink thing going on. I already have the OCv2 but I am looking to get another card for SLI and newegg doesn't sell the OCv2 anymore. The important thing is that I am looking for is stability and it seems that the most ideal setup would be to get identical cards.
By the way, why are there so many versions (updates?) to this card? Have there been issues related to the card that necessitate a revision?
Thanks

Different coolers(HS and fans) and possibly different makers of vRAM. But, you should be able to run SLI without issues regardless of the versions.

How to use two different ojdbc14.jar for two web application.

Hi,
I have two web application running in same tomcat, I need to use the two different ojdbc14.jar for two application, now both are taking the jars from tomcat common/lib directory, I tried copying the new ojdbc14.jar in web-inf/lib folder of one application, but it is not working.
Could you please let me know whether this will take the jar from tomcat by befault or from web-inf, and a solution how to proceed with this.
Thanks in advance.

Yes, I tried removing the jars from common/lib, but as the connection string is mentioned inside the server.xml it is showing db connection error while trying to connect to the database

How to Use two E-Series cards in Labview

I have two 6024E multifunction cards. I have to program a dual station machine - that work independently to each other. I am trying to generate 0-10 volts on the two cards independently at the same time, but when I try this, one of the cards generates the 0-10 ramp and only when this is complete the second ramp starts. I know that I could not accomplish the above with one card, but with two it should work ??
Thanks

The two cards should work independently from each other. It may be something in the way your program talks to the cards. Can you post a simplified VI showing how your program works? It is difficult to diagnose the problem without knowing how you are trying to do things. Also mention the version of LabVIEW and platform.
Lynn

How to use two different accounts in iTunes

I have purchased apps under two different email accounts and I am now unable to use the initial account. Having deleted some apps because of problems, I am recharged for the apps because apple will not accept the original password and user name. When I try to add it to my apple account, I get a message that this particular user name is already in use. (yes, by me!) Please help.

Contact Apple about your iTunes accounts and maybe they can combine the two.
http://www.apple.com/support/itunes/contact/

How to use two different packages which in different directories?

In my progrom, I'm using two differnet packages that in two different directories, but if I use classpath , the program can only be in one environment, so what can I do?

or you set your classpath to the first common dir they have, and specify the packages from that dir on...
or you just simply copy (you don't have to move it) the one package together with the other package...
by the way you can add multiple paths to your classpath...
between the paths you specify a ";"
if i'm not mistaken...
SeJo

How to use two different boot images in the same task sequence

I have a need to use Two boot images in the same task sequence. The reason is I'm deploying ZTI to McAfee encrypted devices which I have already done with McAfee v6 Encryption successfully.
Here's where my problem comes in. We are about to deploy McAfee v7 which means we will have a mix of v6 and v7 in our environment. I must have two special Boot images one with v6 drivers and one with v7 drivers in order for my process to work. I don't see
a way right now to assign more than one boot image to a task sequence. Is there any way to do this?
If I can't do that then I will have to create two task sequences and target collections based on the Endpoint Encryption version to deploy to.
If anyone has suggestions it would be much appreciated. Thank you

Have you tested copying those files to %windir%\system32\drivers during the WinPE session (just enable commandline support to your boot image) to see if they need to be in there before the OS start? Test that and if they don't need to be there during the
boot up of WinPE then:
Create two packages (v6 and v7)
"Run command line", use the package created earlier and just use "copy /Y .\*.* %windir%\system32\drivers" ...again, this should be run according to your needs, variable or some other check like I said

How to use two different hierarchies

I have 1 business areas product.and i have create trw different hierarchies
1.Departments->Class->Sub class->Item
2.Dipertment->Item
Now I have created two reports on that single business area. I wants Report1 have to follow the hierarchies 1 and Report2 have to follow the hierarchies 2.
Now where can i define that?
Please give me some idea about that

Hi
If you have two hierarchies then you cannot force one report to use one and another to use the second. You just need to teach the users how to pick the relevant hierarchy.
When a user clicks on the hierarchy link alongside an item, say the Department, the user should see both hierarchies. If you name the hierarchied items appropriately you will make it easier too.
Best wishes
Michael

Confused by what phone number shows up when iMessaging internationally after using two different SIM cards/numbers

I have a legally unlocked (by AT & T) iPhone 4s which is being used in Australia. First I had a "global" SIM card in it with a +44 (UK) phone number. I used that to text, iMessage and also used Whatsapp. Then I switched to a local SIM card with a +61 (Australian) phone number. The weirdest thing happened-- can anyone explain? I texted someone with the second/current Australian SIM card to a friend within Australia using data to do that and it was received as a text message coming from my Australian phone number. Then I walked into my building and my phone switched to wifi automatically (which I know is normal) and the next text message I sent her arrived as an iMessage but it arrived from my +44 number. That was the old SIM card no longer in my phone. I got a text back from her saying, "Who is this?" because she didn't recognize the +44 number! So, now I'm totally confused! How is that possible? The +44 number SIM card wasn't in my phone--so how could she get the iMessage from that number? Please help! What can I do to fix this?

You can try turning off/on iMessage to have it see your +61 Aussie number...

USing two different SIM cards (different operators) with Iphone 4

What happens when I first sync my Iphone 4with Itunes?
The reason I ask is that I plan to first use it with a Swisscom card and thereafter with an other operator (other SIM card too) in Asia.
Anything I need to know or do differently? Any problem when I change the SIM card ?
Thanks.
English; Français oder Deutsch OK

I am always switching SIM in my unlocked 3GS iPhone, mainly in Switzerland, other European and Asian locations. Never had any problems with email, SMS and calls. Admittedly, I only sync with the Swiss SIM card installed. Most of the carrier settings are loaded on the SIM (or captured automatically) once the SIM is activated in its home country. Good luck!

How to use two different database Drivers in one application ????

I want to select datas in a result set of a query on a ms access database table and insert these into a mysql table of a mysql database in one application.
Now my problem is that only on database driver is acceptet in the same application even it`s instanciatet in a completely different class !!!
Here's the structure of my program:
class one:
String database = "jdbc:odbc:Driver={Microsoft Access Driver (*.mdb)};DBQ=";
database += filename.trim() + ";DriverID=22;READONLY=false}";
java.sql.Driver driver0=new sun.jdbc.odbc.JdbcOdbcDriver();
DriverManager.registerDriver(driver0);
DriverManager.getDriver(database);
con2=DriverManager.getConnection(database,"","");
DatabaseMetaData dmd2;
dmd2=con2.getMetaData();
stmt2=con2.createStatement();
rs2=("SELECT (.........
until here all values can be selected correctly from ms access
class2.get_gas_id(fla_gas);
Now I want to insert these values into mysql.
By despair i created a second class with another jdbc-method:
class2:
public class gas_select{
public static int fla_gas_id;
public static void get_gas_id(String fla_gas)
java.sql.Statement stmt3;
java.sql.Connection con3;
java.sql.ResultSet rs3;
FileWriter fout1;
try
java.sql.Driver driver1=new org.gjt.mm.mysql.Driver();
DriverManager.registerDriver(driver1);
DriverManager.getDriver(config.db_rge_stoffe); ==>
config.rge_stoffe="jdbc:mysql://192.168.10.101:3306/rge_stoffe?user=<user>";
con3=DriverManager.getConnection(config.db_rge_stoffe);
java.sql.DatabaseMetaData dmd3;
dmd3=con3.getMetaData();
stmt3=con3.createStatement();
rs3=stmt3.executeQuery("SELECT (Nr) from tblgaseliste where Gasart like "+"\'"+fla_gas+"\'");
while(rs3.next())
fla_gas_id=rs3.getInt("Nr");
fout1.write(fla_gas_id);
stmt3.close();
con3.close();
fout1.close();
There's no result and no error message. Idon't know what to do !
Has anyone an idea ???
Edited by: goberger on Mar 27, 2008 3:35 PM

Hi!
If I understand your problem correctly, you can create connections to as many databases as you want in one class. In one of my programs I have connection to 3 separate databases, but here is an example:
Connection mysql_con = DriverManager.getConnection("jdbc:mysql://localhost:3306/dbmysql", "root", "12345");
Connection pg_con = DriverManager.getConnection("jdbc:postgresql://127.0.0.1:5433/dbpgsql", "postgres", "12345");Then from mysql_con and pg_con create PreparedStatement or Statement then load selections into ResultSet and then use getString() to get a basic String type result that you want and so update table from each database.
HTH
Victor.
BTW Here I use port 5433 for PostgreSQL connection because I SSH tunnel it from 5432 to 5433
Edited by: vic_sk on Mar 27, 2008 4:23 PM

How to use two different versions of the same jar within one project

Hi everybody!
I have a big problem while integrating different web service clients within one bigger java project. Both implemetations need some jar files to work but demand different version. So, i would like to know if there is any way to tell which implementation should use which version! Anyhow i add those jars to the classpath makes working only one or the other webservice working but never both! Any ideas somebody?
Best regrads,
Stefan G�tz

Of course do have the jar files different names but the classes inside of them are the same ... means that the standard system classloader can distinguish them. When you add a jar to a classpath the name actually dosent matter.... any other ideas, please?
PD.: i tryed to add a manifest file to the one jar which makes use of one of the dublicated jars to specify which jar to take direcly but it makes no difference since once classes loaded they cant be distinguish ....see:
http://java.sun.com/docs/books/tutorial/ext/basics/load.html

How to use two different LDAP authentication for my Apex application login

Hi,
I have 2 user groups defined in the LDAP directory and I provided the DN string for apex authentication something like the below
cn=%LDAP_USER%,ou=usergrp1,dc=oracle,dc=com
cn=%LDAP_USER%,ou=usergrp2,dc=oracle,dc=com
The problem is I couln't pointout both the groups in DN string, I am trying to allow both usergroups to access the application.
Does anyone know how to define both the group in LDAP DN String ?.
Thanx in advance
Vijay.

Vijay,
I don't think you'll be able to use the built-in LDAP authentication scheme. Just create a new authentication scheme that has its own authentication function. In that function code your calls to dbms_ldap however you need. Search the forum for dbms_ldap.simple_bind_s to find examples.
Scott

How to use two different network cards on RT?

Similar Messages

Maybe you are looking for