How to use two libraries on two different pc

I have a MAcBook Pro and a Windows XP Pro with both itunes 7 installed on each.
How can I share my songs with both libraries without resetting the ipod. We hav three ipod (2-nano (2 Gigs) and one video 60 gigs.)
In my family we are three who sharing songs.
Thank's for your answer.

Probably the easiest way to use an iPod on both Mac and Windows computers is to format the iPod (using iPod Updater) using the PC. This will force your iPod to use the Windows file system (FAT32) which both the Mac and PC can read from and write to without the help of additional software. Of course then all your software updates for the iPod will have to be done on Windows.
If you need to use a Mac (HFS+) formatted iPod on a Windows PC, you'll need to install some 3rd party software such as XPlay 2.0 (which you can get from MediaFour Software). This will enable your Windows PC to read a Mac-formatted iPod.
You also need to set the iPod to manual transfer.
See: http://docs.info.apple.com/article.html?artnum=61675

Similar Messages

How to use two different network cards on RT?

Hi everyone... I'm currently working on a project where I have to deal with the issue mentioned in the thread's topic: I have a PC with RT LabVIEW that has to be able to establish network connections using two different network cards. One will be used to connect via TCP/IP with a host computer that will show the data transmitted through shared variables; the other will communicate with another PC through Modbus protocol. The key is that each communication is done through a separate network card.
So far I haven't been able to figure out how to configure both things to happen. Does anyone know how to do this? Any tips will help.
For the RT communication I'm using a standard RT project, with the RT PC being given one of the IPs, and for the Modbus part, I created an I/O server with a master and a slave. Separately everything works fine, but when I get them together it simply won't work.
Thanks for your help!
Solved!
Go to Solution.

Sorry it took me so long to answer, I've been busy lately....I've found a solution to the problem I mentioned, and just in case anyone has similar problems in the future, I'll shortly describe what happened.
As Caseyw suggested, it was necessary to enable both network cards through the Measurement and Automation Explorer. The cause of the connections malfunction was actually that I wasn't using the "right" protocol for the Modbus communication, which ran on the secondary adapter. The solution was to use the URL protocol with the correct path on the field, addressing the right IP address. To avoid making this post a mixture of topics, I won't elaborate futher, but I got the gist of it, so if anyone is having similar problems whether it is working with several network cards or with Modbus communication protocols, feel free to contact me, I'll be glad to help.
Thanks

How to use two different versions of Firefox at the same time on Snow Leopard?

I recently upgraded to Firefox 4.0 on my 27" iMac running Snow Leopard 10.6.7.
Previously, I was using Google's "Page Speed" along with Firebug in Firefox 3.6.15 to optimize images in my web pages, and to find other areas to optimize.
Page Speed is not yet compatible with Firefox 4.0. I wrote to Google about this some time ago -- no answer yet.
If I run Firefox 3.6.15 in order to use Page Speed, I run into a few problems afterward when I start using Firefox 4.0 again, since they both use the same "Firefox" folder in my "Application Support" folder.
How can I set it up so that I can have two separate "Firefox" folders in my "Application Support" folder?
Or is there an easier way to use two different versions of Firefox simultaneously, even if one has extensions and/or plug-ins installed which are not compatible with the other version?
Thanks for a great browser!

Please disregard my question. I just conducted more web search and learned how to use Firefox's profile manager in order to make a separate profile for Firefox 3.6.15.
You can find instructions on this page:
http://support.mozilla.com/en-US/kb/Managing%20profiles#os=mac&browser=fx35
'''A small tip:'''
If your Firefox app is named anything other than "Firefox" -- say for example "Firefox 3.6.15" -- when you follow the instructions at the above link, make sure you escape the blank space that is before the version number by adding a backward slash before it, when you type the command string in the Terminal. In other words, in that string, you should use this:
Firefox\ 3.6.15
I hope that helps someone.
WW

SBO - How to use two different Stock Account within the same Item Group

Hi,
I'm currently stuck within one of my implementation.
I'm deploying the same solution worldwide which worked pretty well until now. All the items are connected to an item group, with a unique GL account, supposed to book at the same time the good receipt and the good issue (Balance-Sheet Account = 14xxxxx).
My new unit is willing to use two different GL accounts when performing its stock entry (let say 14xxx10) and another GL account for the good issue, let say 14xxx20.
Do you have any clue so i can please them and keep using at the same time the item group ?
Thanking you in advance
Stephane

Hi,
In fact, we use the GL account as the HQ Account (Reporting Account) while the "Export Code" will be used to store the local GL Account (greek account).
As such, we can, somehow handle two different chart of accounts.
In my reporting, i'm only using a single GL account for stock movements, while my greek counterparts want to handle two different accounts.
Threfore, i have only two solution since there is normally a one to one relationship between a HQ account and a local account that are :
1 - Duplicate the HQ accounts
In that case, i do respect anytime the one to one relationship. I've got one HQ account for one local account. But how can i put this since i can only handle one single stock account.
2 - I keep my single stock account like this but i won't be managing the possibility to get two different Export Codes.
Regards
Stephane

How to use two different ojdbc14.jar for two web application.

Hi,
I have two web application running in same tomcat, I need to use the two different ojdbc14.jar for two application, now both are taking the jars from tomcat common/lib directory, I tried copying the new ojdbc14.jar in web-inf/lib folder of one application, but it is not working.
Could you please let me know whether this will take the jar from tomcat by befault or from web-inf, and a solution how to proceed with this.
Thanks in advance.

Yes, I tried removing the jars from common/lib, but as the connection string is mentioned inside the server.xml it is showing db connection error while trying to connect to the database

How to use two different accounts in iTunes

I have purchased apps under two different email accounts and I am now unable to use the initial account. Having deleted some apps because of problems, I am recharged for the apps because apple will not accept the original password and user name. When I try to add it to my apple account, I get a message that this particular user name is already in use. (yes, by me!) Please help.

Contact Apple about your iTunes accounts and maybe they can combine the two.
http://www.apple.com/support/itunes/contact/

How to use two different packages which in different directories?

In my progrom, I'm using two differnet packages that in two different directories, but if I use classpath , the program can only be in one environment, so what can I do?

or you set your classpath to the first common dir they have, and specify the packages from that dir on...
or you just simply copy (you don't have to move it) the one package together with the other package...
by the way you can add multiple paths to your classpath...
between the paths you specify a ";"
if i'm not mistaken...
SeJo

How to use two different boot images in the same task sequence

I have a need to use Two boot images in the same task sequence. The reason is I'm deploying ZTI to McAfee encrypted devices which I have already done with McAfee v6 Encryption successfully.
Here's where my problem comes in. We are about to deploy McAfee v7 which means we will have a mix of v6 and v7 in our environment. I must have two special Boot images one with v6 drivers and one with v7 drivers in order for my process to work. I don't see
a way right now to assign more than one boot image to a task sequence. Is there any way to do this?
If I can't do that then I will have to create two task sequences and target collections based on the Endpoint Encryption version to deploy to.
If anyone has suggestions it would be much appreciated. Thank you

Have you tested copying those files to %windir%\system32\drivers during the WinPE session (just enable commandline support to your boot image) to see if they need to be in there before the OS start? Test that and if they don't need to be there during the
boot up of WinPE then:
Create two packages (v6 and v7)
"Run command line", use the package created earlier and just use "copy /Y .\*.* %windir%\system32\drivers" ...again, this should be run according to your needs, variable or some other check like I said

How to use two different hierarchies

I have 1 business areas product.and i have create trw different hierarchies
1.Departments->Class->Sub class->Item
2.Dipertment->Item
Now I have created two reports on that single business area. I wants Report1 have to follow the hierarchies 1 and Report2 have to follow the hierarchies 2.
Now where can i define that?
Please give me some idea about that

Hi
If you have two hierarchies then you cannot force one report to use one and another to use the second. You just need to teach the users how to pick the relevant hierarchy.
When a user clicks on the hierarchy link alongside an item, say the Department, the user should see both hierarchies. If you name the hierarchied items appropriately you will make it easier too.
Best wishes
Michael

How to use two different report items in SSRS page header

Hi All,
Can we use more than one report item in SSRS 2008 R2 page header...
Like this in expression..
=IIF(Globals!PageNumber=1,ReportItems!Col1.Value,ReportItems!Col2.Value)
Whenever Globals!PageNumber=1 I want to show values present in Col1 and when Globals!PageNumber<>1 then show values present in col2
Also let know if any other work around is there to meet above criteria...
Thanks,
RH
sql

Hi RH,
Based on my research, a text box in the page header can only refer to the ReportItems built-in collection once in an expression. So if we directly use the expression in the page header, we can receive the error message that “The Value expression for textrun’’
refer to more than one report item. An expression in a page header or footer can refer to only one report item”.
To work around the issue, we can add two text boxes to the page header: one for the textbox col1 value (=ReportItems!Col1.Value), another for the textbox col2 value (=ReportItems!Col2.Value). Then use the expressions as below to control the visibility of
those textboxes:
=iif(Globals!PageNumber=1,false,true)
=iif(Globals!PageNumber<>1,false,true)
Please note that only text boxes on the current page are available as a member of the ReportItems collection in a page header or page footer section. For example, if ReportItems!textbox_name.Value refers to a text box that only appears on the first page
for a multipage data region, we cannot see a value on other pages except the first page.
Reference:
Using the ReportItems Collection References (Report Builder 3.0 and SSRS)
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

How to use two different database Drivers in one application ????

I want to select datas in a result set of a query on a ms access database table and insert these into a mysql table of a mysql database in one application.
Now my problem is that only on database driver is acceptet in the same application even it`s instanciatet in a completely different class !!!
Here's the structure of my program:
class one:
String database = "jdbc:odbc:Driver={Microsoft Access Driver (*.mdb)};DBQ=";
database += filename.trim() + ";DriverID=22;READONLY=false}";
java.sql.Driver driver0=new sun.jdbc.odbc.JdbcOdbcDriver();
DriverManager.registerDriver(driver0);
DriverManager.getDriver(database);
con2=DriverManager.getConnection(database,"","");
DatabaseMetaData dmd2;
dmd2=con2.getMetaData();
stmt2=con2.createStatement();
rs2=("SELECT (.........
until here all values can be selected correctly from ms access
class2.get_gas_id(fla_gas);
Now I want to insert these values into mysql.
By despair i created a second class with another jdbc-method:
class2:
public class gas_select{
public static int fla_gas_id;
public static void get_gas_id(String fla_gas)
java.sql.Statement stmt3;
java.sql.Connection con3;
java.sql.ResultSet rs3;
FileWriter fout1;
try
java.sql.Driver driver1=new org.gjt.mm.mysql.Driver();
DriverManager.registerDriver(driver1);
DriverManager.getDriver(config.db_rge_stoffe); ==>
config.rge_stoffe="jdbc:mysql://192.168.10.101:3306/rge_stoffe?user=<user>";
con3=DriverManager.getConnection(config.db_rge_stoffe);
java.sql.DatabaseMetaData dmd3;
dmd3=con3.getMetaData();
stmt3=con3.createStatement();
rs3=stmt3.executeQuery("SELECT (Nr) from tblgaseliste where Gasart like "+"\'"+fla_gas+"\'");
while(rs3.next())
fla_gas_id=rs3.getInt("Nr");
fout1.write(fla_gas_id);
stmt3.close();
con3.close();
fout1.close();
There's no result and no error message. Idon't know what to do !
Has anyone an idea ???
Edited by: goberger on Mar 27, 2008 3:35 PM

Hi!
If I understand your problem correctly, you can create connections to as many databases as you want in one class. In one of my programs I have connection to 3 separate databases, but here is an example:
Connection mysql_con = DriverManager.getConnection("jdbc:mysql://localhost:3306/dbmysql", "root", "12345");
Connection pg_con = DriverManager.getConnection("jdbc:postgresql://127.0.0.1:5433/dbpgsql", "postgres", "12345");Then from mysql_con and pg_con create PreparedStatement or Statement then load selections into ResultSet and then use getString() to get a basic String type result that you want and so update table from each database.
HTH
Victor.
BTW Here I use port 5433 for PostgreSQL connection because I SSH tunnel it from 5432 to 5433
Edited by: vic_sk on Mar 27, 2008 4:23 PM

How to use two different port numbers for a single OC4J container

Hi,
I have a container OC4J_System running in 7998 port, now I want to add one more port for the same container.
Is it feasible?
Kindly help me out.
Regards
Vicky

It's quite complicated, see
Two Page Numbering Schemes in the Same Document.
Regards, Hans Vogelaar (http://www.eileenslounge.com)

How to use two different versions of the same jar within one project

Hi everybody!
I have a big problem while integrating different web service clients within one bigger java project. Both implemetations need some jar files to work but demand different version. So, i would like to know if there is any way to tell which implementation should use which version! Anyhow i add those jars to the classpath makes working only one or the other webservice working but never both! Any ideas somebody?
Best regrads,
Stefan G�tz

Of course do have the jar files different names but the classes inside of them are the same ... means that the standard system classloader can distinguish them. When you add a jar to a classpath the name actually dosent matter.... any other ideas, please?
PD.: i tryed to add a manifest file to the one jar which makes use of one of the dublicated jars to specify which jar to take direcly but it makes no difference since once classes loaded they cant be distinguish ....see:
http://java.sun.com/docs/books/tutorial/ext/basics/load.html

How to use two different LDAP authentication for my Apex application login

Hi,
I have 2 user groups defined in the LDAP directory and I provided the DN string for apex authentication something like the below
cn=%LDAP_USER%,ou=usergrp1,dc=oracle,dc=com
cn=%LDAP_USER%,ou=usergrp2,dc=oracle,dc=com
The problem is I couln't pointout both the groups in DN string, I am trying to allow both usergroups to access the application.
Does anyone know how to define both the group in LDAP DN String ?.
Thanx in advance
Vijay.

Vijay,
I don't think you'll be able to use the built-in LDAP authentication scheme. Just create a new authentication scheme that has its own authentication function. In that function code your calls to dbms_ldap however you need. Search the forum for dbms_ldap.simple_bind_s to find examples.
Scott

How to use two different fonts in a single label?

Hello all,
Is there any way to use font of 2 different size and color for a single label?
Looking for a quick replies from you.
Regards,
Obaid

No. One label, one font, size and color.

How Can i Use two Different Public IP Addresses no my DMZ with ASA Firewall.

How To Using Two Different Public IP Address on My DMZ with ASA 5520
Postado por jorge decimo decimo em 28/Jan/2013 5:51:28
Hi everyone out there.
can any one please help me regarding this situation that im looking for a solution
My old range of public ip address are finished, i mean (the 41.x.x.0 range)
So now i still need to have in my DMZ another two servers that will bring some new services.
Remember that those two server, will need to be accessable both from inside and from outside users (Internet users) as well.
So as i said, my old range of public ip address is finished and we asked the ISP to gives some additional public
ip address to address the need of the two new servers on DMZ. and the ISP gave us the range of 197.216.1.24/29
So my quation is, on reall time world (on the equipment) how can i Use two different public ip address on the same DMZ
on Cisco ASA 5520 v8??
How my configuration should look like?
I was told about implementing static nat with Sub Interfaces on both Router and ASA interface
Can someone please do give me a help with a practical config sample please. i can as well be reached at [email protected]
attached is my network diagram for a better understanding
I thank every body in advance
Jorge

Hi,
So looking at your picture you have the original public IP address range configured on the OUTSIDE and its used for NAT for different servers behind the ASA firewall.
Now you have gotten a new public IP address range from the ISP and want to get it into use.
How do you want to use this IP address range? You want to configure the public IP addresses directly on the servers or NAT them at the ASA and have private IP addresses on the actual servers (like it seems to be for the current server)?
To get the routing working naturally the only thing needed between your Router and Firewall would be to have a static route for the new public network range pointing towards your ASA OUTSIDE IP address. The routing between your Router and the ISP core could either be handled with Static Routing or Dynamic Routing.
So you dont really need to change the interface configuration between the Router and ASA at all. You just need a Static route pointing the new public IP address towards the ASA outside IP address.
Now when the routing is handled between the ISP - ISP/Your Router - Your Firewall, you can then consider how to use those IP addresses.
Do you want to use the public IP addresses DIRECTLY on the HOSTS behind the firewall?This would require you to either configure a new physical interface with the new public IP address range OR create a new subinterface with the new public IP addresses range AND then configure the LAN devices correspondingly to the chosen method on the firewall
Do you want to use the public IP addresses DIRECLTY on the ASA OUTSIDE as NAT IP addresses?This would require for you to only start configuring Static NAT for the new servers between the inside/dmz and outside interface of the ASA. The format would be no different from the previous NAT configuration other than for the different IP addresses ofcourse
Of the above ways
The first way is good because the actual hosts will have the public IP addresses. Therefore you wont run into problems with DNS when the LAN users are trying to access the server.
The second way is the one requiring the least amount of configurations/changes on the ASA. In this case though you might run into problem with DNS (to which I refer above) as the server actually has a private IP address but the public DNS might reply to the LAN hosts with a public IP address and therefore connections from LAN could fail. This is because LAN users cant connect to the servers OUTSIDE NAT IP address (unless you NAT the server to public IP address towards LAN also)
Hopefully the above was helpfull. Naturally ask more specific questions and I'll answer them. Hopefully I didnt miss something. But please ask more
I'm currently at Cisco Live! 2013 London so in the "worst case" I might be able to answer on the weekend at earliest.
- Jouni

How to use two libraries on two different pc

Similar Messages

Maybe you are looking for