How to use two versions routing in SAP on different time period?

Hi PP experts,
There is a material Material-100 linked Routing-A and Routing-B. I would like to use Material-100/Routing-A combination during period 29.04.2015-30.05.2015, and using Material-100/Routing-B combination during period 01.06.2015-31.12.9999.
Could you please kindly guide me how to do it in SAP? Thank you.
Best Regards,
Bu Fanchao

Hi Amit,
Below is my thinking, please kindly help me check.
1. Due to routing-A is existed in SAP with period 29.04.2015-31.12.9999. So I need to change the valid-to-date from 31.12.9999 to 30.05.2015 via ECM.
2. Create routing-B by CA01 with period 01.06.2015-31.12.9999.
3. Create production-version-1 with routing-A/BOM during 29.04.2015-30.05.2015. And Create production-version-2 with routing-B/BOM during 01.06.2015-31.12.9999.
My new question: Do I have to create production-version to achieve it? Does SAP system can choose routing automatically without production-version?
Best Regards,
Bu Fanchao

Similar Messages

How to run two versions of dreamweaver at the same time

How to run two versions of any dreamweaver at the same time?
There must be a way to do this.

east99 wrote:
> How to run two versions of any dreamweaver at the same
time?
> There must be a way to do this.
Yes, there is: on two separate computers.
You cannot run two versions of Dreamweaver simultaneously on
the same
computer. They can coexist side by side, but the operating
system will
not let you run them together.
David Powers, Adobe Community Expert
Author, "The Essential Guide to Dreamweaver CS3" (friends of
ED)
Author, "PHP Solutions" (friends of ED)
http://foundationphp.com/

How To Use Your Own Router with Out Loosing Verizon's FIOS Services

How to use your own router with Verizon’s FIOS Service
First, you need a basic understanding of how FIOS works but unfortunately there are two types of FIOS systems out there. All of the systems utilize a fiber optic cable to bring TV, phone and internet to your location over one optic cable. In addition these systems provide interactivity including widgets, remote DVR, movies on demand and so forth via an IP (Internet Protocol) signal. Your STB (Set Tip Box) requires both a video and IP signal. The IP signal is necessary for all of the aforementioned interactivity. The fiber cable terminates at the Optical Network Terminal or ONT for short. The ONT converts the optics into a digital signal that can be utilized by ones equipment. From the ONT your video, phone and internet are provided to the location. This is where things can differ as the internet signal can be provided via a coaxial (MoCA or Multimedia over Coax Alliance) or RJ45 Cat5 (Ethernet) cable. It is important to identify and understand the differences of these two setups. In my case I have my internet entering via Ethernet cable, which in my humble opinion makes things a heck of a lot easier.
How does one tell the difference? In most cases it’s rather simple; just look at the Verizon’s router WAN (Wide Area Network) Port. Does it have a RJ45 (Ethernet) or Coax (TV cable Cord) going to it? If the router’s WAN port doesn’t have a coaxial connector then one will need to convert the MoCA signal into a usable Ethernet signal that routers understand. The easiest way is to use Verizon’s router as a bridge. In this method the Verizon’s router simply converts the signal and passes it along to your own router. The challenge is to try to maintain the interactivity that FIOS TV provides. Because of this one needs to supply the IP routed signal back to the FIOS router. There are multiple methods for doing this and I would recommend investigates which one make the most sense.
In my particular case the IP signal was provided by Ethernet. Again there are various ways of installing one’s own router. The hardest is to utilize Verizon’s router as a bridge. This setup requires configuring Verizon’s router as a bridge and also creating a VLAN (Virtual Local Area Networks). In addition one needs to set up their own router so it will work with the various routing tables and networks. For me this is too complex for the average person and it can be difficult to trouble shoot if something goes wrong. Please consider that Verizon will not support utilizing third party routers.
The easier method is to request an Ethernet signal (if you don’t already have one) from their ONT. I would highly recommend getting your hands on a NIM or Network Interface Module. This device is used to convert Ethernet to Coaxial so it can be fed back to your STBs. These can be purchased online and Verizon technicians can be a valuable resource with these sorts of acquisition. At the very least they can point you to the right direction. Once you have a NIM the rest is rather simple.
Log into the current Verizon Router.
Located the router’s MAC address and copy it down.
Go to the port forwarding section and copy down the Applied Rules.
Example:
Network Computer/Device: 192.168.1.100:63145
Application & Ports Forward: Application UDP Any -> 6347
Note: There may be up to three entries for each one of your Set Top Boxes.
Look at your current device list, typically found on the home screen. Copy down your STB MAC and IP address.
Example:
IP-STB1
Connection Type: Ethernet
* IP Address: 192.168.1.100
IP Address Allocation: DHCP
*MAC Address:                07:73:fFe:ad:8b:3f
* Things you will need to write down
Go to the network section and look for the main Ethernet connection. Select this and then select more setting, typically found at the bottom. Release the current lease.
Remove the Verizon router
Install your router
Connect the NIM by plugging in an Ethernet from one of the routers LAN (Local Area Network) ports to your NIM. Then connect the coax cable, the same cable that was used by Verizon router.
Set you DHCP routing IP pool to accommodate Verizon’s STB IP’s (note their IP’s start at 192.168.1.100)
Go to DHCP section and reserve the STB IP’s by inserting the IP’s and MAC addresses. This shall ensure that nothing else utilizes the same IPs as the STBs thereby preventing IP address conflict.
Add the port forwards from Step 5 above.
Clone Verizon’s Mac Address utilizing the info from step 2
Finish setting up the router in typical fashion.
Unplug and re-plugin your STB’s and test functionality. It’s best to try using a widget or Movie on demand function.
Note: if the new router can net get an internet signal contact Verizon’s support and have them release the IP and reset the ONT.
EVERYTHING should be working at this point.

3 Go to the port forwarding section and copy down the Applied Rules.
Example:
Network Computer/Device: 192.168.1.100:63145
Application & Ports Forward: Application UDP Any -> 6347
Note: There may be up to three entries for each one of your Set Top Boxes.G
Your display obviously is not like mine as mine does not dosplay the port associated with the ip address
whatever, the STB's start at 192.168.1.100 and icement by 1 for each
the port addr's will be 63145 alo incrementing by 1
there is 1 entry for each in my pf list
however each ip addr also has a port entry starting at 35000 also incrementing by 1 for each ip addr
For some unknow reason these are duplicated e.g I appear to have 11 entries exaactly the same for each stb and as the fios services rules have no action switc there is nowhere to delete the extraneous garbage.
Why do you clone the mac addr??

How to use two dimensional array in custom.pll

HI
How to use two dimensional arrays in custom.pll
I tried by the following way .
type ship_array is table of number index by binary_integer;
type vc_array is table of ship_array index by binary_integer;
But I am getting the error as that
A plsql table may not contain a table or a record with composite fields.
Please tell me the way how to use them

which forms version are you using? two dimensional arrays are available in >= 9i if memory serves.
regards

How to use two tasks in Workflow

Hi Everybody !
Can Any one tell me, How to use two tasks in one activity step type of Workflow CRM?
My requirement is... I have to execute two tasks in single activity step in Workflow. Is it possible.if it is possible tell me the flow Please.
Thanks in advance.
Raghava Vakada.

You can define one as a "Before" or "After" method if that is usable for you. (defined in tab Methods for Activity steps)
Otherwise there is also the step flag "Advance with dialog" (tab Details on Activity steps, but the tab it is found on depends on your version) which allows one user to seamlessly execute two consecutive tasks.
So depending on your real need there may be several options available. If all that is needed is that the same user can execute the two tasks then Advance with Dialog is perhaps the best choice. If the user then cancels execution of the second activity the work item is available for execution. If you define an After method and the user cancels execution the work item has still been completed since its (main) method has been completed.

How to use two accounts in ichat?

How to use two accounts in ichat? Is it possible?
Currently I am using an account of Gmail but I want to add another account [email protected] (it is also an account of Gmail).

You can define one as a "Before" or "After" method if that is usable for you. (defined in tab Methods for Activity steps)
Otherwise there is also the step flag "Advance with dialog" (tab Details on Activity steps, but the tab it is found on depends on your version) which allows one user to seamlessly execute two consecutive tasks.
So depending on your real need there may be several options available. If all that is needed is that the same user can execute the two tasks then Advance with Dialog is perhaps the best choice. If the user then cancels execution of the second activity the work item is available for execution. If you define an After method and the user cancels execution the work item has still been completed since its (main) method has been completed.

How to use Two main windows with in a page in script ?

Hi any body explain me...
How to use Two main windows with in a page in script ?
with header data in one main window,
& Item data in other main window.

HI..,
u need to go for SPLITTING THE MAIN WINDOW !!!
Main windows in page windows allow you to format text in multiple columns. Define an area in the page window, in which to position the main windows.
Here is the procedure !!
-->Create a page window and assign it to a page.
Choose Edit --> Main windows.
A dialog box appears.
-->Enter values in the fields Area width and Area height in accordance with the input guidelines for main windows.
-->Enter values in the fields Spacing and Number in the Horizontal group if you want to use multiple columns. You can ignore the fields in the Vertical group.
Determine how many columns and line areas are required for label printing. Then enter the corresponding values in the fields in the Horizontal and Vertical groups.
-->The value in the field Left margin varies from main window to main window if multiple columns are used. The following applies:

Left margin of current column + Window width + Horizontal spacing = Left margin of next column
In label printing, the field Upper margin also varies from main window to main window:

Upper margin of current main window + Window height + Vertical spacing = Upper margin of next main window
-->Enter a value in the field Start position.
This is a counter. Enter a starting value which is equal to or greater than 1.
-->The main windows are added to the list.
-->Save your form.
reward if it helps u...
sai ramesh

How to use open data set in SAP

Hi SAP Gurus,
        Could anyone help, how to use open data set in SAP.
      I need to upload a file from Application server (ZSAPUSAGEDATA) to internal table (IT_FINAL).
Thanks & Regards,
Krishnau2026

Hi Krishna.
These are the steps you need to follow.
tables: specify the table.
data: begin of fs_...
        end of fs_    " Structure Field string.
data: t_table like
        standard table
                  of fs_...
data:
w_file TYPE string.
data:
fname(10) VALUE '.\xyz.TXT'.
select-options: if any.
PARAMETERS:
p_file LIKE rlgrap-filename.
w_file = p_file.
select .... statement
OPEN DATASET fname FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
*OPEN DATASET fname FOR OUTPUT IN BINARY MODE.
LOOP AT t_... INTO fs_....
write:/ .....
TRANSFER fs_... TO fname.
or
TRANSFER t_... TO fname
ENDLOOP.
CLOSE DATASET fname.
Reward points wisely and if you are benefitted or ask for more detailed explanation if problem not solved.
Regards Harsh.

How to use two split this method in my code

How to use two split this method in my code
if i got one string line which like this
("aa!bb!cc~ab!bc!cd") a
nd want to use two split to spare ! and ~ this seal for my spare point how that output
has come diff ?
public static void main(String[] args) {
 String str = "aa!bb!cc~ab!bc!cd";
 String strs[]= str.split("~");
 String strE[]= str.split("!");
 int count =0;
 for(int j=0; j < strs.length; j++){
 for (int i = 0; i < strE.length; i++){
 System.out.println(count + " " + strE);
count++;
the output how can it be like this
0 aa
0 bb
0 cc
1 ab
1 bc
1 cd

Move your second slit inside the first loop, so you are splitting the substring, not the entire string.

Will using two versions of dreamweaver trash my code??

Our company is currently building a new website and we keep running into problems. Currently we have one main web desginer and another person who helps input text and pictures. Because we have two people working on this project the file bounces between two computers at the office and then is taken home and used on a third computer. In the midst of the multi-use of computers there are two versions of Macromedia, studio 8 and MX. We had our code completely trashed and now all versions on each computer are not working. We think that it was due to a code that was pulled off of a blog for a "print this page" option that was input into the template, but now just realized that using two versions of dreamweaver also may have caused the problem. If anyone has suggestions as to what may have caused this please respond!
Thank you!

Thank you David! We will stop worrying about that and try to back track the tainted code

How to Use CMOD and SMOD in SAP using ABAP Code

Hello anyone,
Please help me How to use CMOD and SMOD in SAP using ABAP code.
Give Me Some Sample Example.
Mail ID: [email protected]
Thanks,
Regards,
S.Muthu,
SAP Developer.

Hi,
User Exits.
http://www.erpgenie.com/sap/abap/code/abap26.htm
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sapgenie.com/abap/code/abap26.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
http://www.easymarketplace.de/userexit.php
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sappoint.com/abap/userexit.pdfUser-Exit
customer exits
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f1a7e790-0201-0010-0a8d-f08a4662562d
Menu Exit.
http://www.sappoint.com/abap/spmp.pdf
http://www.sappoint.com/abap/userexit.pdf
http://www.sapdevelopment.co.uk/enhance/mod_sapmenu.htm
http://www.sapdevelopment.co.uk/enhance/enhancehome.htm
USER EXIT
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sapgenie.com/abap/code/abap26.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
http://www.easymarketplace.de/userexit.php
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sappoint.com/abap/userexit.pdfUser-Exit
http://www.sap-img.com/ab038.htm
http://help.sap.com/saphelp_46c/helpdata/en/64/72369adc56d11195100060b03c6b76/frameset.htm
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://expertanswercenter.techtarget.com/eac/knowledgebaseAnswer/0,295199,sid63_gci982756,00.html

Can I use two default route in a router

Hi
I have a router which have two isp line.
I want connected two differnt remote site by two isp line.
now i have one default and another static.
i can use two default route like this ?
0.0.0.0 0.0.0.0 201.222.103.x 0
0.0.0.0 0.0.0.0 201.221.102.y 1
Thanks
[email protected]

hi
I feel you wanted to know if you have 2 default routes already in place and about the impact if you put network specific routes.
In this case you can have both the default routes in place in addition to the network specific static routes as i mentioned in my first mail.
Since the most specific route will be used the traffic destined to your remote networks will flow accordingly as per your ip route statements.
If your first link goes down the default route pointing the ISP-1 and the network sepcific route pointing the ISP-1 will go off and by default all the traffic will flow via the second interface which is connected to ISP-2 the behaviour is viceversa if your link to ISP-2 goes down.
By this you will be atleast having some kinda reachability in case of any issues with the corresponding ISPs which is being used to reach the remote network than getting totally disconnected from the remote sites.
regds

Can you use two duetts on logic at the same time

can you use two duetts on logic at the same time so i can have inserts

tracktor wrote:
can you use two duetts on logic at the same time so i can have inserts
Before going ahead on this you should definitely check with Apogee as I think they do not recommend using their interface(s) in an Aggregate device.
Maybe that's changed.. not sure.
pancenter-

How to compare data from 2 different time periods

Hi folks,
I have a question on approach to a problem. I want to be able to compare data from a common db, but for 2 different time periods. For example I want to see the number of occurences of an instance in my data for today and compare it against occurences a week ago today. What's the best approach for this kind of problem? Is this done with 2 separate queries from 2 sub reports and then compared some how? Any comments on this approach or an other are appreciated.
TIA bvd

Follow these steps:
1) Bring your first time period in your main report. This will be your first query.
2) Bring your second time period in a subreport. This will be your second query.
3) Bring the values from your subreport into your main report using shared variables.
4) Lastly, compare the results using formulas in your main report.
I hope this information proves useful.
Regards,
Zack H.

How to use two different versions of Firefox at the same time on Snow Leopard?

I recently upgraded to Firefox 4.0 on my 27" iMac running Snow Leopard 10.6.7.
Previously, I was using Google's "Page Speed" along with Firebug in Firefox 3.6.15 to optimize images in my web pages, and to find other areas to optimize.
Page Speed is not yet compatible with Firefox 4.0. I wrote to Google about this some time ago -- no answer yet.
If I run Firefox 3.6.15 in order to use Page Speed, I run into a few problems afterward when I start using Firefox 4.0 again, since they both use the same "Firefox" folder in my "Application Support" folder.
How can I set it up so that I can have two separate "Firefox" folders in my "Application Support" folder?
Or is there an easier way to use two different versions of Firefox simultaneously, even if one has extensions and/or plug-ins installed which are not compatible with the other version?
Thanks for a great browser!

Please disregard my question. I just conducted more web search and learned how to use Firefox's profile manager in order to make a separate profile for Firefox 3.6.15.
You can find instructions on this page:
http://support.mozilla.com/en-US/kb/Managing%20profiles#os=mac&browser=fx35
'''A small tip:'''
If your Firefox app is named anything other than "Firefox" -- say for example "Firefox 3.6.15" -- when you follow the instructions at the above link, make sure you escape the blank space that is before the version number by adding a backward slash before it, when you type the command string in the Terminal. In other words, in that string, you should use this:
Firefox\ 3.6.15
I hope that helps someone.
WW

How to use two versions routing in SAP on different time period?

Similar Messages

Maybe you are looking for