How to use TYPE addition with the OPEN DATASET ?

Hi,
How to use TYPE addition with the OPEN DATASET and what is the use ?
For Example:
OPEN DATASET 'test.dat'
TYPE 'lrecl=80, blksize=8000, recfm=FB'
FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
Also, if I wish to do the same for a .CSV file how can we do it.
Thanks,
-Sid

Hi,
OPEN DATASET 'test.dat'
TYPE 'lrecl=80, blksize=8000, recfm=FB'
FOR OUTPUT IN TEXT MODE ENCODING DEFAULT
For more information press F1 on OPEN DATASET.
Thanks

Similar Messages

How to use Cinema4D lite with no opening After Effects CC ?

How to use Cinema4D lite with no opening After Effects CC ?
Is that possible ?
Open a 3D object Photoshop-type in After Effects CC (without C4D)
It is also possible?
thanks
xav

It is as Mylenium says.
See this page for details such as this:
"You open the version of CINEMA 4D that is installed with After Effects using the New > MAXON CINEMA 4D File command or the Edit Original command in After Effects. You will not see this version of CINEMA 4D installed in the Start menu on Windows or in the Applications directory on Mac OS."

How to use glob search with the wildcard in command find?

How to use glob search with the wildcard in command find?
I want to find any file its names begin with "readme" string using command find. Why the following command cannot work?
$find /usr/share/doc -name readme*
However, the following commands can work?
$find /usr/share/doc -name readme\* or
$find /usr/share/doc -name readme'*'
I want to know: After using the “\” or ' ', why the wildcard do not become a character "*"?(still a metacharacter).
Another question:
I want to find any file its names begin with "readme*" string using the command find.What command should I use?

I want to know: After using the “\” or ' ', why the
wildcard do not become a character "*"?(still a
metacharacter). The backslash is known as an escape character. It means 'use the character value of the next character, not the special meaning' It is used in a lot of places such as command line, global regular expression patterns, and editors such as vi.
In a typical shell, the splat (*) expands to all file names before passing the file names to the current command. So a \* sequence tells the shell to pass a *, not a list of file names, to the command.
Demo - OpenSuSE Linux 10.3
- I have a bunch of files. Let's list those that end in grid. Create one called *grid, and list again
pops@fuzzyVM:~/pops> ls
a b c startgrid stopgrid
pops@fuzzyVM:~> ls *grid
startgrid stopgrid
pops@fuzzyVM:~> ls \*grid
ls: cannot access *grid: No such file or directory
pops@fuzzyVM:~> touch '*grid'
pops@fuzzyVM:~/pops> ls
a b c *grid startgrid stopgrid
pops@fuzzyVM:~/pops> ls *grid
*grid startgrid stopgrid
pops@fuzzyVM:~/pops> ls \*grid
*grid
pops@fuzzyVM:~/pops>In the above, how would I remove the file *grid, and only that file?
Another question:
I want to find any file its names begin with
"readme*" string using the command find.What command
should I use?What were the results of the two versions you tried? And why?

How to use %Type declaration with table residing in a different database

How can I use the %TYPE declaration if the table is from a different database.
E.g
v_business_unit ps_jrnl.header.business_unit%TYPE;
In the above declaration statement,the table 'ps_jrnl_header' resides in a different database(Database A) from the one I am currently in( Database B).(This is because data needs to be extracted from Database A into Database B).

1. Create a database link to the other database (this probably already exists since your proc is interacting with that database)
2. Create a synonym for the table in the other database
create synonym foo for ps_jrnl.header@database_a;3. Reference the synonym in your variable declaration:
v_business_unit foo.business_unit%TYPE;

How to make type flow with the shape of an object?

Hi there,
I am a bit of an Illustrator newbie. I am needing some help to work out how to wrap or manipulate type to fit the shape and flow of an object? I have attached an image to show you what I am trying to do. I want the "shop by measure" text to be in the yellow blank space of the tape measure but flowing with the shape of the tape. Any help appreciated! Be gentle please lol.

See online help. Read about Envelope Distortion. Then keep things simple as you experiment. This takes about 2 minutes.
When doing "ribbon distortions," selecting corresponding top and bottom MeshPoints as pairs and moving/scaling/rotating them together helps avoid things getting all distorted out of control. See this PDF for an example. The example was done using a 1 Row, 2 Column Mesh.
JET

Does anyone know how to use iWork series with the cloud?

Im not seeing how to get my iMac docs linked to the cloud with the new OSX Mountain Lion. I see a move button in the menu but cannot find directions on how this works. Can someone enlighten me? Thanks

Here's the easiest way to get documents into iCloud with iWork.
Open up an iWork application (version 9.2) and choose "Open." You'll get the file dialog. Click the iCloud button in the upper left if it isn't selected already so you get the grey linen background.
Then open a Finder window and find the relevant iWork documents you want in iCloud. Simply drag them to the iWork document 'Open" window and they will be moved to iCloud.
Note iCloud is not general-purpose file storage. You can ONLY store Keynote files in Keynote iCloud, Pages in Pages, and Numbers in numbers. So project folders where you have multiple different files types in the same folder are out.

How to use format-date with the report parameter

Hi all,
How to use the format-date function with this tag,
<?param@begin:P_FROM_DATE?><?$P_FROM_DATE?>
this form date is coming from report parameter and is coming like this 2012/11/01 00:00:00.
So now i need this in DD-MON-YYYY fromat.I tried like this <?param@begin:P_FROM_DATE?><?$format-date:P_FROM_DATE;'DD-MON-YYYY'?>
but its giving error. Can any one pls tell how to convert it to customized date format.
thanks & Regards
Srikkanth.M

Issue solved.
Ref this link
XML date Format

How to use hard drives with the new mac pro

A few quick questions about upgrading to new Mac pro desktop
I currently have 4 internal hard drives for a total of 8T
What will the solution be to add storage to the new desktop?
I assume it will be thunderbolt options?
Lets say I wanted at least 8TB of storage to add to the computer
and attached the storage via thunderbolt will it be as fast data throughput
as the harddrives in my current computer hooked up to the external bus?
I also have a pci card running my audio plugins for Universal Audio how will those pci
cards work on the new mac pro?

Also will the transfer rate with the pegas be as fast as if the drives were connected to the bus in the machines like the old mac pro?
To answer that, think of this as a Bottleneck problem. The overall performance is as slow as the slowest device.
At this writing typical rotating drives can produce a momentary burst at 125 MBytes/sec or 1,000 Mbits/sec. Only FireWire 800 is starting to be a limit for that -- EVERYTHING else is faster. Thunderbolt-1 is 10,000 Mbits/sec -- ten times faster.
The best SSD can produce a burst at maybe 800 MBytes/sec or 6,400 Mbits/sec. There is not a big speed difference in an SSD RAID, because the latency is already low. But the 10,000 Mbits/sec of ThunderBolt-1 is still plenty fast enough for that as well.
If ThunderBolt-2 devices really can run a single data stream at 20,000 Mbits/sec, that does not make ANYTHING faster -- it just moves the ceiling (potential bottleneck) a bit farther away.

How to use nested tables with the inner table in a separate row

Hi,
I am having a problem when changing our existing Adobe printform delivery note so that serial numbers are written for each item line.
I've searched the forum and found many posts relating to nested tables, but none that had exactly my situation.
Currently I print item lines like this (this uses the complete width of the form):
Pos....Quantity...Material..........Description..................................................Date
99.........99.........ABCDEFGH....alksdalksjdlkasjdlsajdlkjasldjaslkdjakslj........9999.99.99
.................................................fskdjflsdfljsdflkjsdlkfjsdlkjfdfsf
.................................................asdkadsfdkfhsdkfhskjdfhks
but I want to add serial numbers after that for each item like this:
Pos....Quantity...Material..........Description...................................................Date
99.........99.........ABCDEFGH....alksdalksjdlkasjdlsajdlkjasldjaslkdjakslj.........9999.99.99
.................................................fskdjflsdfljsdflkjsdlkfjsdlkjfdfsf
.................................................asdkadsfdkfhsdkfhskjdfhks
.................................................Serial numbers:
.................................................9999999999..9999999999..9999999999
.................................................9999999999..9999999999..9999999999
I have added serial numbers to my the current table in the interface/context/data view so it look like this:
TTYP - ITEM_FIELDS
...DATA structure
......POSNR
......QTY
......MATNR
......TTYP - ITEM_TEXTS
.........DATA structure
............DESCRIPTION
......DATE
......TTYP - SERIAL_NOS
.........DATA structure
............SERIAL_COL1
............SERIAL_COL2
............SERIAL_COL3
In my Hierarchy I currently have this hierarchy and binding:
Table - ITEM_FIELDS
...Body Row - DATA
......Cell - POSNR
......Cell - QTY
......Cell - MATNR
......Subform - ItemTexts
.........Table - ITEM_TEXTS
............Body Row - DATA
...............Cell - DESCRIPTION
......Cell - DATE
Now I am trying to add the SERIAL_NOS table into the ITEM_FIELDS/DATA body row right after the DATE cell - but I am not allowed to drag anything into the table structure.
Does anybody have an ida how I can achieve this, please?
Kind regards,
Claus Christensen

HI,
Set the body page as flowed and set the tables also flowed.
go to bodypage>object->subform-->select flowed option.
I thihnk this will work..if u are getting all the records properly into the tables 1 and 2.
Thanks,
Mahdukar

How to use logical operators with the fields, this feature is avaliable?

Hi, I need in a form to compare the content of two fields, i.e. email and confirmation email, is this possible in Forms Central?, how I can do it?
Thanks you

Not Supported
Hi,
This is not something we currently support but you can add or vote on feature ideas:
http://forums.adobe.com/community/formscentral?view=idea
If you need to add a new idea click "Create an idea" under "Actions" in the top right.
Thanks,
Jeff

Open zip file with the OPEN DATASET statement.

How?
The zip file is a text file compressed.
Thanks for answers.

in application server no ZIP files exist...as such flat files exist which can be read using DATASET concept.

When I try to sign in to iTunes, it tells me that my Apple ID has not yet been used with the iTunes Store. How do I use my account with the iTunes Store?

When I try to sign in to iTunes, it tells me that my Apple ID has not yet been used with the iTunes Store. How do I use my account with the iTunes Store?

Hello Daijalove97,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Using an existing Apple ID with the iTunes Store and Mac App Store
http://support.apple.com/kb/HT2589
To use your Apple ID at the iTunes Store
Open the latest version of iTunes.
Choose Store > Sign In from the Store menu.
Enter your Apple ID and password, then click Sign In.
Click Review when asked to review your information.
Enter your billing information, a credit card will be required.
Click Continue when you're done entering your credit card and billing information.
Best of luck,
Mario

How to use INVOKE function with INT parameter types

Can you tell me how to use invoke function with int parameter type ?

Pass the int as an Integer.

How can i use text expander with the new Mavericks,

how can i use text expander with the new Mavericks,

I regret upgrading to mavericks for the same reason
ftamez wrote:
how can i use text expander with the new Mavericks,
Now I have been searching - and you have to buy an app and it will cost you $34.99 (what a rip off)

HT201269 I had an old PowerMac and now i have the MacBook Pro. I am not use to the new iTunes. I use to be able to drag music that I had added onto my computer from a CD to my iPhone or iTouch. How do I do that with the new iTunes?

I have CDs that I want to import onto my new MacBook Pro to my iPhone. I am not use to the new iTunes with the Mountain Lion software. I had an old PowerMac that had the Leopard software and I was able to drag those songs to my iPhone. I can't find that option. When I find the song I want to add to my iPhone, I tried dragging it to the top when it shows that my iPhone is connected with iTunes. Or how do i do this with the Cloud? I am new to that as well. Seems like it just held my purchased songs from iTunes.

iCloud only has content purchased (or free) from iTunes. Ripped music or music from other sources is only on your computer. As the iPhone can only sync with one computer at a time you should copy the iTunes folder from the old computer to the new one. It's in the Music folder on the old one, just copy the entire folder to the Music on the new computer. When you first sync your iPhone content will be replaced by the content of the new computer.
You can optionally enable iTunes Match. This searches the non-iTunes content in iTunes or on your iPhone and finds the original digital version on the Internet if it exists. This then becomes your backup. If you have music that it cannot find it will upload it to your cloud storage, but you may have to pay for the storage if it is over 5 GB total (along with your backup). iTunes content and Match content are not included in the 5 GB free limit.
Usually to fix mail issues just delete the account, reset (reboot) the phone by holding HOME and SLEEP until an Apple logo appears, and adding the email account(s) back.

How to use TYPE addition with the OPEN DATASET ?

Similar Messages

Maybe you are looking for