How to use value in a drop-down list box as "With these Values" parameter?
Hello, new user.
I have a drop-down list box on Page 1, upon which the user can choose a study number. The List Box is named "P1_STUDY_NBR".
Then I have a list, one entry of which goes to my master-detail form, which is Page 6. I would like it to go to the study number that the user choose on Page 1.
In my target on the create/edit list entry, I put in "Page in this Application", "Page 6", then in Set these items, I put in
P6_STUDY_NBR
My question is what to use in With these values, where I want the contents of the P1_STUDY_NBR. I tried:
&P1_STUDY_NBR
and that does not work. If I put in one of the study numbers, like 336-00, then it does work, but I want it to pass the study number the user chooses in the list box. How do I refer to the contents of P1_STUDY_NBR?
-Mary
Yes, that does work, thanks. I'm now getting the default value I was putting in yesterday rather than an error message, so there must be something loading it, but I'll hunt around for what process might be doing that, or try re-creating the master-detail form again.
Similar Messages
-
How to increase the width of the drop down list box in SSRS multi value parameter
Hi,
I am using SSRS 2012. I have a parameter, which accepts multi value.
The width of the drop down list box is very small, and the user need to scroll to the right to view the complete view of the content in the list box. But, if I don't use multi value then the length is good. Kindly suggest how to I increase the width
of the list box when it set to multi value parameter.
Thanks in advance,
Mahalengam ArumugamHi Mahalengam,
After testing the issue in my local environment, I can reproduce it. When the values for a single parameter are too long, the drop-down list of the parameter will automatically enlarge to an appropriate size. While the values for a multiple parameter are
too long, we need to scroll to the right to view the complete view of the content in the list box in SSRS 2008. But in SSRS 2008R2 and SSRS 2012, we can directly drag the black control at the bottom of the list box to control the size.
The following screenshot is for your reference:
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support
Hi Katherine,
Thanks for your reply. I understood we need to drag the list box to a maximum size to view the contents.
But, this seems an additional task, i know this is a limitation in the current version of SSRS and hope it will be resolved in the next versions.
Thanks for your efforts,
Mahalengam Arumugam -
Hello Everyone
I have two drop downs. Both are coming from look up fields from two lists. i want to set a default value(first list item) for the first drop down list box and then apply cascading based on the default value for the next drop down list box. I found one article(http://www.bizsupportonline.net/infopath2010/display-first-item-drop-down-list-box-infopath-2010.htm)
where in i can set a default value but i can't apply cascading based on that default value. Any suggestions would be highly appreciated.
Thanks
Ramanjulu Naidu NHey Ramanjulu,
Take a look at the below article which I believe will answer your question.
http://basquang.wordpress.com/2010/03/29/cascading-drop-down-list-in-sharepoint-2010-using-infopath-2010/
Daniel Christian (MCTS) -
How to use the concept of drop down list in Xcode
Please help to make an app that uses a dropdown list inside a tableview cell
You can use UIPickerView or Safari web page, where could be displayed a drop down list instead.
-
Reg: Drop-Down list Box not displaying values
Hi Experts,
i am publishing a module pool program in the internet using SICF Transaction . In the internet my drop down list box is not displaying the default value but in my sap it works fine .
What may be the problem?
Regards,
VikramHello Thorsten Domsalla ,
My Problem is in my sap module pool program there is a drop down list box which disaplays default values its working fine in sap gui but when i access through internet (SICF) Transaction the Drop down list box not listing out default values .
i am using Integrated ITS Version 7.0 and Support package 08.
Regards,
Vikram -
Suppress entries in the drop down list box for fields Priority and Category
Hello,
For the transaction type 'Service Process' , I want to suppress certain values in the drop down list box for the fields Priority and Category based on certain conditions.I couldn't find a suitable badi for this scenario.
Is there a solution so that I can control the values displayed in the drop down list box ?
Thanks,
Sriram
Edited by: Sriram Sundar Rajan on Mar 17, 2008 12:15 PMHello,
For the transaction type 'Service Process' , I want to suppress certain values in the drop down list box for the fields Priority and Category based on certain conditions.I couldn't find a suitable badi for this scenario.
Is there a solution so that I can control the values displayed in the drop down list box ?
Thanks,
Sriram
Edited by: Sriram Sundar Rajan on Mar 17, 2008 12:15 PM -
How to get the selected value/key of a drop down list box in webdynpro Java
Dear SDN Members,
I have added some static data into a drop down list box by key UI element using the procedure specified in value help tutorial.
Now i want to display the value selected in a dropdown list box on view whenever i select an item in a dropdown list box.
Can any one put here the code part relating to this.
Your help will be awarded.
Thanks in advance,
Regards,
Sireesha.BHi Sireesha,
You want to display value based on the key selected in dropdown list. If you want to do like that
1) Create a context attribute for ex: key_value
2)In the properties of the attribute select the calculated as true.
3)It will create getter and setter methods for your attribute.
4)Go to implementation add the following code in getter method of your attribute
String attributeName = IPrivateCreate.IContextElement.KEY;
//KEY is your dropdown key attribute not the value attribute.
IWDAttributeInfo attributeInfo = element.node().getNodeInfo().getAttribute(attributeName);
ISimpleTypeModifiable simpleType = attributeInfo.getModifiableSimpleType();
IModifiableSimpleValueSet valueset = simpleType.getSVServices().getModifiableSimpleValueSet();
Object key = element.getAttributeAsText(attributeName);
return valueset.getText(key);
Regards
Suresh -
FF3 used to have a drop down list of the most recent pages that a tab had displayed under the back arrow button. FF4 does not appear to have this. How can I see history of what's been displayed in the tab say four or five pages back?
You can get the drop down list by either right-clicking on the back/forward buttons, or holding down the left button until the list appears.
If you want the drop-down arrow you can add it with the Back/forward dropmarker add-on - https://addons.mozilla.org/firefox/addon/backforward-dropmarker -
How to get selected value of a drop down list in CO?
Hi All,
Could you plz provide me the code for getting the selected value from the drop down list in CO?
Thanks
Debashreeuse pageContext.getParameter("paramName");
Regards
Srini -
How to add user command to drop down list in output screen for OALV Report
Hi Experts,
I have created a report by using OALV.
in Output screen i have added drop down for one filed with 2 values.
when i select value from the drop down list the program should trigger and the next field should be update.
so it is possiable to add a user command for the drop down list in output screen.
if so please help me .
Regards,
RathanHI,
Check the Demo program BCALV_EDIT_06 with having the DATA_CHANGED event still you can capture the changed data. This event will help you.
or you can go for this code..
data: it_f4 type lvc_t_f4,
wa_f4 type lvc_s_f4.
wa_f4-FIELDNAME = 'CONNID'.
wa_f4-REGISTER = 'X'.
wa_f4-GETBEFORE = 'X'.
wa_f4-CHNGEAFTER = 'X'.
append wa_f4 to it_f4.
"register F4 event
CALL METHOD g_alv_grid_ref->register_f4_for_fields
EXPORTING
it_f4 = it_f4.
"Once you try to pick the value HANDLE_DATA_CHANGED event will be triggered
"Definition
methods:
handle_data_changed FOR EVENT data_changed OF cl_gui_alv_grid
IMPORTING er_data_changed e_onf4 e_onf4_before e_onf4_after,
"Implementation
METHOD handle_data_changed .
DATA: ls_mod_cells TYPE lvc_s_modi.
IF e_onf4_before = 'X'.
MESSAGE 'Data changed before F4' TYPE 'I'.
ENDIF.
IF e_onf4 = 'X'. "if event triggered by F4
MESSAGE 'Data changed on F4' TYPE 'I'.
ENDIF.
IF e_onf4_after = 'X'.
MESSAGE 'Data changed after F4' TYPE 'I'.
ENDIF.
"here you know which cell was modified
LOOP AT er_data_changed->mt_mod_cells INTO ls_mod_cells.
"just example test case, here you can implement your code for modified cells
IF ls_mod_cells-value >=5.
CALL METHOD er_data_changed->add_protocol_entry
EXPORTING
i_msgid = 'SABAPDOCU'
i_msgty = 'E'
i_msgno = '888'
i_msgv1 = 'Only numbers below 5 are possibe'
i_msgv2 = 'Please correct'
i_fieldname = ls_mod_cells-fieldname
i_row_id = ls_mod_cells-row_id.
CALL METHOD er_data_changed->modify_cell
EXPORTING
i_fieldname = ls_mod_cells-fieldname
i_row_id = ls_mod_cells-row_id
i_value = space.
ENDIF.
ENDLOOP.
ENDMETHOD. "handle_data_changed
Edited by: sum_it2 on Nov 21, 2011 10:07 AM -
Is it possible to allow use to type entry into a drop down list box ?
Hi ,
Is it possible to provide type in the value option ( provide option to user like he can select a value from the extracted data in a drop down list object and also he can enter a value manually ) to a drop down list box on an interactive form ?
NandaHello Nanda,
In the Adobe LiveCycle Designer you can specify several list items for objects of type 'Drop-down List' and it is also possible to allow custom entries (checkbox: "Allow Custom Text Entry").
Regards,
Philipp -
Restricting values on the drop down list, while creating a PO
Hello SAP Experts,
Could you help me with the following.
While creating a PO (ME21N), based on the Account Assignment Category(KNTTP) entered , I have to restrict the values in the drop down list for selecting the material group (MAKTL). I have searched some in SDN, but couldn't find anything suitable. Appreciate any help.
Thank you,
SorabCould anyone tell me , if it is possible. Has anyone tried this before.
Thank you,
Sorab -
Display pages that reacts to different values in the drop down list.
I currently did up a simple drop down list that stores values retrieved from the database. I would like the program to display pages that reacts to the selected value without the press of any button, which means, if I select any value from the drop down list, the page will be displayed according to the value selected.
Below are the codes that I did for the retrieval of data from the database.
<%
String username = "test";
String password = "test";
String thinConn = "jdbc:oracle:thin:@dbdev:1521:ORCL";
Connection conn;
Statement stm;
ResultSet rs;
String baseQuery ="SELECT DISTINCT ID FROM STAFF ORDER BY ID ASC";
try {
conn = DriverManager.getConnection(thinConn,username,password);
stm = conn.createStatement();
rs = stm.executeQuery(baseQuery);
%>
<strong>Retrieve ID from Database</strong>
<select size="1" name="dropdown">
<%
while (rs.next()) {
String id = rs.getString("ID");
out.write("<option value=\"" + id + "\">" + "level " + id + "</option>");
conn.close();
} catch (SQLException e) {
%>
</select>Would appreciate if someone might offer some help to what I have to do next
Edited by: wyndsor on Jun 26, 2008 7:34 PMcotton.m wrote:
[_An instant classic_|http://www.webdeveloper.com/forum/showthread.php?t=184937]
Sometimes I find myself wondering why people think they won't get caught with their cross forum cross posting. Then I realize that if they knew about Google they wouldn't have needed to ask the question in the first place.
It's kind of funny in an ironic sort of way. -
DSN's Missing in the ODBC drop down list box
Being new to JDeveloper, I have been running through the
tutorials. I have installed Oracle lite on NT4 SP3 and have
tested out the sample data base 'Polite' using the installed
odbc driver through MS query ...all works fine, however in
tutorial 3 while trying to add the Data Form using Oracle Lite
driver, no dsn's appear on the next screen of the wizard when I
click on the 'ODBC drop down list box'. How do I get Jdeveloper
to bring up the DSN's. I have also tried the 'Sun JDBC-ODBC
driver' route, yet still there is not a single DSN in the drop
down list box.
Thanks
nullMohamed Nosseir (guest) wrote:
: Gavin Higgo (guest) wrote:
: : Mohamed Nosseir (guest) wrote:
: : : Gavin Higgo (guest) wrote:
: : : : Being new to JDeveloper, I have been running through the
: : : : tutorials. I have installed Oracle lite on NT4 SP3 and
have
: : : : tested out the sample data base 'Polite' using the
: installed
: : : : odbc driver through MS query ...all works fine, however
in
: : : : tutorial 3 while trying to add the Data Form using
Oracle
: : Lite
: : : : driver, no dsn's appear on the next screen of the wizard
: : when I
: : : : click on the 'ODBC drop down list box'. How do I get
: : Jdeveloper
: : : : to bring up the DSN's. I have also tried the 'Sun JDBC-
ODBC
: : : : driver' route, yet still there is not a single DSN in
the
: : drop
: : : : down list box.
: : : : Thanks
: : : Would you please give us more information about your
: : : configuration? JDeveloper version, Oracle Lite version,
: : Windows
: : : NT locale setting? Is it US version of Windows NT or local
: : : version?
: : : Thanks.
: : I am using Jdeveloper beta 2 (downloaded from the Oracle web
: : site) against Oracle lite 3.0.6.2.4 on Windows NT 4 sp 3.
: : Is this all the info you require?
: I also want to know if your Windows NT is a US English version
or
: a localized version?
: Thanks,
It is a Windows NT US English version
Thanks
null -
ABAP WebDynPro tutorials for Roadmaps and drop-down list box
Hi Experts,
I need some tutorials on Roadmaps and drop-down list box in ABAP WebDynPro which will show me step by step process how to create application using this. 'help.sdn' pages do show the procedures for implementing those ui elements.
And also the previous threads refer to some expired documents.
Thanks in advance.....
Plz help....
Edited by: Akashdeep Basu on Aug 9, 2008 9:30 AMHi
[SAP BLOG on ABAP-WEBDYNPRO|https://www.sdn.sap.com/irj/sdn/nw-development?rid=/webcontent/uuid/512040e1-0901-0010-769c-c238c6ca35d9]
[Step-By-Step Approach|http://help.sap.com/saphelp_nw04s/helpdata/en/79/002c2a0d43e645a39a89dd662b5f68/content.htm]
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a282c952-0801-0010-1eb5-87953e036712
Regards
Pavan
Maybe you are looking for
-
How to refresh the Expired Login Form on the onChange event of the password
Hi, In the Expired Login Form I have places a custom label. My requirement is that on the onchange event of the password field the label color should change to orange if the entered password meets the password policy else red. I am trying the followi
-
How can I resolve installation errors DF024 & DF037 for CS5.5 on Mac?
Please help. I've gone through the forum posts, as well as searched the Internet, and find the matter daunting. Have tried to implement a solution and may have caused more problems. Assistance would be greatly appreciated. PROBLEM: I am unable to uni
-
;( Can anyone save my sanity! Read all about updating PC, thought easy, I can do that. During summer fitted extra memorey 512, fitted new hard drive, then an extra one for back ups, all well so far, then at Christmas bought KT4 Ultra BSR board & AM
-
Problems with navigation using JSF 1.0 RI
I have a problem with faces in that navigation simply stops working. I have a page which have prev/next buttons on it, and a cancel button. Each button is of the form <h:form id="viewxxx"> <h:commandButton value="XXX" styleClass="buttonInput" action=
-
Hi, Is there a way to exporte pages and/or content areas from Portal? Is so how can i do it? Pedro