How to use variable characteristic values in management cockpit graphs?

Hi,
I have a report that has a condition showing first 3 complaint reason. I cannot handle to show only these 3 values at x axis seperately.
- When I choose all complaint reason values in selection criteria, graph shows me the total value of reasons.
- I cannot choose fixed 3 complaint reasons because first 3 reasons change from month-to-month. I tried to select all values individually, but '0' values are also shown in the graph.
How can I solve this problem?
Thanks,
Answers will be awarded with points.

Hi Larissa;
I had the same problem and they propose this:
Attributesu0092 order that the system displays in the Planning Layout
That was not the solution presented to the customer. Because of system performance, a programmer was there and created a VBA code. But I wasn't there so I don't have the code.
regards

Similar Messages

How to use a characteristic value variable in a formula?

Hi all,
I have created a characteristic value variable (manual input) for 0CALDAY in a query to get the Start & End date. There is requirement in the report to display a KF showing the duration between Start & End Date.
I have tried to create a Formula Variable with Replacement Path, Ref Char 0CALDAY. In the Replacement Rule, there is an option to Replace Variable With variable. However, I wasn't able to locate the variable I have created for user input.
Any idea how to achieve this?
Many thanks,
Yoong-En

hi,
if you have the start and end dates as user entry then follow this
1) create a formula variable with reference char as start date of the type customer exit
2) create another formula with end date as reference char of type customer exit
3) in the cmod write the code your logic should be in such a way the the value at the user entry should be passed on to this formula variable the same for end date code
4) create a formula with ( start date formula variable - end date formula variable)
you can use this code
WHEN 'ZV_YRFKDAT'.(formula variable name)
    IF I_STEP = 2. "after the popup
      LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE
      WHERE VNAM = 'ZV_KEYDAT1'.(user entry variable name)
        CLEAR L_S_RANGE.
        L_S_RANGE-LOW = LOC_VAR_RANGE-LOW. "low value, e.g.YYYY (2006) part of key date (20060625)
        L_S_RANGE-SIGN = 'I'.
        L_S_RANGE-OPT = 'EQ'.
        APPEND L_S_RANGE TO E_T_RANGE.
        EXIT.
      ENDLOOP.
repeat teh same for end date
hope this helps
Thanks
krishna.y
    ENDIF.

How to use the prompted value in the filter expression

Hi
Is it possible to use the prompted value in the filter expression?
My requirement is that user will be prompted for a date field and I need to filter the records such that the records are displayed for the last 5 weeks from the date entered by the user.
If somehow I know how to use the prompted value in the filter expression then this requirement is easy to be done. If this is possible, please guide me?
If there are other ways to acheive the desired results then please suggest.
Thanks
-Jaz

Edit: example added
SQL> create table tb_test
2 ( id number(5)
3 , tot number(5)
4 , mon_tot number generated always as (tot*15) virtual
5 );
Table created.
SQL> insert into tb_test (id, tot) values (1, 5);
1 row created.
SQL> select * from tb_test;
        ID        TOT    MON_TOT
         1          5         75
1 row selected.
SQL> update tb_test
2 set    tot = 15
3 where id = 1;
1 row updated.
SQL> select * from tb_test;
        ID        TOT    MON_TOT
         1         15        225
1 row selected.

How to use variables with

I need to get the number of lines in internal table, which would
be easy, using DESCRIBE TABLE itab LINES lines. But the problem
is, that I get the name of this internal table in the field of
another internal table, so I have to use the name of internal
table as variable, but I don't know how to use variables with
DESCRIBE TABLE (or if this is possible).

Hi,
REPORT ZPRUEBA782 .
define two tables with diferent structures.
data: begin of table1 occurs 0,
registro type i,
end of table1.
data: begin of table2 occurs 0,
registro type i,
repid like sy-repid,
end of table2.
data: rows type i.
start-of-selection.
fill them with data
do 1000 times.
table1-registro = sy-tabix.
append table1.
enddo.
do 1757 times.
table2-registro = sy-tabix.
table2-repid = sy-repid.
append table2.
enddo.
call a form that receives as input the table and returns the number
of rows as output.
perform howmanyrows tables table2 changing rows.
break-point. "evaluate the number of rows
perform howmanyrows tables table1 changing rows.
break-point. "evaluate the number of rows
end-of-selection.
form howmanyrows tables itable changing rows.
rows = 0.
loop at itable.
add 1 to rows.
endloop.
endform.
You can try it if you don't find a better solution.
Cheers,
Chaitanya.

How to use a cumulative value in a formula

hi, experts
I have a question about how to use a cumulative value in a formula. Below is the example:
                        wk1   wk2   wk3   wk4   wk5....wk n
sales order        5       10    15      10      5
build plan          8       8     10      15     10
result                3       1      -4       1       6
result row is what I want to get, the formula is:
wk1 result = wk1 build plan - wk1 sales order
wk2 result = wk1 build plan + wk2 build plan - (wk1 sales order + wk2 sales order)
wk3 result = wk1 build plan + wk2 build plan + wk3 build plan - (wk1 sales order + wk2 sales order + wk3 sales order)
I've already ticked the cumulative in properity of the key figures. It seems like that the cumulative results only can display, but can't be used in formula. Could you please help me? Many many thanks !!

Hi
In properties of that formula, there is option called 'formula collision' there you select 'formula from compiting result'. I think this will solve the problem.

How to use @variable(bouser) in Universe to get BOE userid in Xcelsius

Dear Expert,
I have request that need to display BOE userid to displayed in Dashboard using Xcelsius,
after searching in Internet, i found that it can be done by using @variable(bouser) in an object in the Universe, and use the object in Qaaws, but i don't how to use it.
already tried insert /* @variable('BOUSER') */ in END_SQL universe parameter, but still no luck.
my question is :
how to use @variable(bouser) in universe? and then my Xcelsius can display the BOE userid?
thanks in advance for any answer.
I Using SAP Integration KIT to create universe from Query BEX
Luqman
Edited by: luqman hakim on Jun 29, 2010 4:03 PM

>
Didier Mazoue wrote:
> Hi,
>
> You are mentioning that you are using SAP Integration Kit.
> Does it mean that the source you are targeting is SAP BW?
>
> If it is the case, this is unfortunately not supported.
> SAP BW MDX does not support calculated expressions that return string or date: this is a limitation of SAP BW engine.
> This is one of the reason why a lot of user exit are used to address these needs.
>
> Regards
> Didier
Didier Mazoue
yes, my Data source is SAP BW, and connected to BOE via SAP INT KIT.
It's too bad that SAP doesn't support so simple requirement.
you said : user exit
are used to address these needs.
so there are possibility to solve my problem.
would you give me the logic of user exit? which part I should create the user exit
I'm quiet familiar with user exit in BW
thanks

How to use variable in source path of an image in flex

hello
i just want to know that how to use variable in source path
of an image in flex

I am doing exactly that with data binding at the moment. This
is my Image element
<mx:Image width="50" minHeight="50" height="76"
source="{Application.application.parameters.api}/rest/entity/{data.Slug}/Image"
/>
Note the curly brackets
HTH
Pat

How to use variable in topology

Hi every one..
how to use variable in topology

The normal way you use in interface or procedure. But the package you are executing should have the variable in 1st step with set or refresh mode.

Using variables in the title of the graph

Hi Gurus,
I would like to use - for example a presentation- variable in the title of a graph.
I assign a value for that variable in dashboard prompt.
Does anybody know the syntax of using variable in the title of a graph
(Not in a Title view!)
Thanks in advance .
Regards
Laszlo

You can reference presentation variables in the following areas :
Title Views
Narrative Views
Column Filters
Column Formulas
Conditional Formatting conditions
Chart scale markers.
Gauge range settings.
Static text.
Direct Database Requests
Dashboard prompts
iBot Headlines and text

How to use cfloop index value as part of another variable

Hello,
I have a RATE form that first asks "how many rates will you
be adding?" that answer generates a series of form elements based
on the answer. You then have a form grid to populate, 3 values for
each rate (price, code, name).
This part works fine. The issue is now I need to INSERT the
values into the table, so I need to use the INDEX value of the
cfloop to recreate the amount (and names) of the fields in the
INSERT statement. How do I escape, or re-create the evaluated form
elements ( in which their count is #i# as the loop goes) when I
need to evaluate for #i# AND evaluate for #form.sku_i_name# at the
same pass?
I am passing, for example, #form.sku_2_Name# where that might
equal "Half Page". The number 2 in that variable was assigned
during the form creation by the current index of a cfloop. Since my
action (insert) page does not know how many (out of 50 possible)
sku's are coming, how do I use the skuCount (another hidden value
passed as well) to create a proper INSERT SQL command when I need
to eval the form element and the index at the same time?
Obviously #sku_#i#_Name# does not work, and #sku_i_Name# does
not either... I know this can be done, and that I am just doing it
wrong.
Thanks for any help!

bigbrain28 wrote:
> Thank You, cfsearching! I don't quite understand 100%
how it works
As all three of us indicated you use array notation for this
type of
requirement. In ColdFusion you can use array notation or dot
notation
to access structure data. Almost all data in ColdFusion is
now some
type of structure.
I.E. #Form['myField']# is the same as #Form.myField#.
The advantage is that with array notation you can do things
you can not
do with dot notation. You can reference elements that have
keys that
are illegal variable names such as one with a space.
I.E. #url['my field'] is allowed, #url.my field# would fail
or course.
And you can concatenate the key string as we did with your
example.
I.E. #Form['aString' & aVariable]#
There are many powerful things one can do with this
knowledge. One can
access record sets with array notations. This can allow for
very
sophisticated parsing of a record set.
I.E. #myQuery['column'][row]#
You can dynamical call a variable. Thus creating dynamic code
that does
not even need to know what variables exist until run time.
I.E. #variables[anyName]#
This just scratches the surface.

How to define variable for value range in Bex Query?

Hi
How to define variable for Keyfig. value range on runtime like characteristic in Bex Query?
Example: On runtime user select one of the following condition:
1)User want to those records where amount is greater than $1000
2)User want to those records where amount is greater than $1000 and less than $5000
3)User want to those records where amount is greater than and equal to $1000

Hi ,
Need to Use exceptions & conditions for this scenario's & need to create variable for exceptions based on condtions.
Below document provides steps how to make selections at run time for a kfg.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/60b33a28-dca2-2d10-f3b2-d2096b460b1e?QuickLink=index&overridelayout=true&48842368468641
Regards,
Seshu.P

How to use variables in data slices?

Hello,
in BI-IP I have tried to use variables in a data slice.
The user should fill these variables.
How can one use and fill these variables?
Thank you
Daniel

Hello Horst,
data slice is a very strong system lock. It is normally not a good decission to allow users to control this part becuse it sould be in administration of a responsible person.
If you allow users in the web to open or close data slices, this is like a "open period" funtion in financials: Think about what could happen, if anyone else than the responsible person could do that....
This is my point of view.
I would do it in anoter way: Create an User exit and fill a variable like desribed above. You read each line and make a decission whether the user might see this line or not (e. g. period open? yes or no?). The period and the status for the period could be maintained in a table or in a characteristic. table might be easier.
regards
Eckhard

How to use variables in logical file name definition FILE

Hi Friends,
How can I use variables in logical file name definition (tcode FILE). The requirement is to pass value in these variables (based on selection criteria), and use it as part of file name. You quick response will be highly appreciated.
Thanks,
Kuldeep Joshi

Hi,
Thanks for your reply.
In detail, the scenario is like I have created an Open Hub. Its working fine. Now I am planning to execute this open hub using process chain and for that I have to define the file output on application server along with logical file name (using tcode FILE). The logical file name contains two variables (defined in FILE) i.e. z_dept and z_fiscperiod.
Filter value in DTP ( I will read these values from Ztable using routine )
Dept = R&D
Fisc period = 004/2009
Variables defined in tcode FILE:
z_dept for Dept
z_fiscperiod for Fiscal Period
Logical file name : <z_dept>_<z_fiscperiod>.csv
Now the challenge is to populate filter values in these two variables so that the filter value can be used for naming the output file.
My last option is to read/update SAP standard table used for storing variable values (i.e. PARAMVALUE)
Please let me know if you can help me in this issue OR is there any standard method/FM to populate value in these variables
Thanks,
Kuldeep

How to use variable in automator?

So I am trying to create this dictation command in automator where i can go like this "Launch Safari" or "Launch iTunes" so how to use the variable for text in the command?

Hi,
This is possible without a variable.
Remove the "Ask for Text" and "Set value of Variable psize" actions.
In the "Scale Images" action:
-- Click on the "Options" button.
-- click on "Show this action when the workflow runs" checkbox.
This is almost similar to that "Ask for Text" action, since the "Scale Images" action will be displayed as a dialog, You can adjust the percentage in this dialog.

How to sort the characteristic values in layout

Hello,
I wont to use a layout with key figs in data columns and two characteristics in lead columns. The problem is that the sorting of first characteristic values is displayed in alphabetical order. How can I change the order to another exact defined combinations for characteristic values?
I read the thread with the same problem (see below the link), but the solutions are not satisfacroty.
Has anyone another idee?
Thanks for any help!
Larissa Bräutigam

Hi Larissa;
I had the same problem and they propose this:
Attributesu0092 order that the system displays in the Planning Layout
That was not the solution presented to the customer. Because of system performance, a programmer was there and created a VBA code. But I wasn't there so I don't have the code.
regards

How to use variable characteristic values in management cockpit graphs?

Similar Messages

Maybe you are looking for