How to use variables in email messages ?

Hi,
I'm new to crystal server. I successfully able to schedule a report and send it thru email as an pdf attachment.
I was wondering, How i can use email message body with some variables values from tables used in reports or crystal report parameters or formula fields from report?
Is it possible?
Thanks,
Parv

Parv Chana wrote:
I think even with opendocument, I will be sending email to my users. The same question will still be there.
Well I'm not an expert on this particular subject, so I could be wrong. My idea was that instead of sending the actual report in pdf form you send a link to the report on the server. From this point the users could select parameters/prompts and then view different data each time they access or refresh the link. Just a thought since sending a pdf is for the most part can't be changed once it was generated.
Regards,
Tim

Similar Messages

  • Using iCloud, how do i sync all email messages/folders etc

    how can i sync all email messages and folders using the icloud service?  i have updated and re-organized my email folders on my imac and i want them to sync with my iphone and ipad.  all of my other things are syncing very well between the three devices but my mail messages are only suyncing between the ipad and iphone.  i want to get my imac in the sync loop too.
    any suggestions?
    thanks,
    james

    i want to get my imac in the sync loop too.
    James...
    Is your Mac running v10.7.2 and has iCloud setup?
    Apple - iCloud - Learn how to set up iCloud on all your devices

  • HT204389 How do I delete my email messages and also delete my laptop messages at the same time, as I used to do with my Blackberry?

    How do I delete my email messages along with my laptop messages at the same time, as I used to do with my Blackberry?

    You need to configure the mail client to use IMAP instead of POP3 protocol.

  • How do i keep my email messages on my iphone

    how do i keep my email messages on my iphone, every time i open my mobileme account it has to download the emails. this is expensive when i am abroad. can anyone help.

    There's no alternative email program you can use - they all work in the same way. IMAP accounts store mail on the server, there's no way around that. Exchange email accounts work the same way too.
    Even if you used an old-style POP3 email account, the iPhone wouldn't store all email readily accessible offline. The iPhone is designed to be permanently connected to the internet.
    If you're worried about the cost of accessing email over then mobile network when abroad, either limit your use to WiFi networks (and turn off data roaming)  or get a local SIM card and only pay local data rates.

  • How do I view an email message source

    How do I view an email message source? Someone sent me an email showing my email as the sender. If I try to block the sender I am afraid I will be blocking myself. I am also afraid that whoever sent that email will send to all of the email addresses in my address book. the people I know will think that the email came from me when it came from someone using my address I.D. How or what should I do?

    Could you check your actual Firefox version here:
    Help > About Firefox
    The forum recorded version 10, which is obsolete and insecure, so if that is correct, you should update ASAP. If there is something holding you back from updating, what is it? There may be a solution.
    If you do have the current version of Firefox, this article might help: [[Websites say that Firefox is outdated or incompatible even though it's the latest version]].

  • How do you remove multiple email messages at one time

    I have a iphone 4 and today it started piling up over 4000 undeliverable messages for no apparent reason. I somehow managed to stop the process but I am left with over 4000 messages that I need to delete. How do you remove multiple email messages at one time. I can "mark" all the messages at once but I cannot find the move or delete button to trash the messages. Can some one help me out.
    Thanking you in advance.
    PL

    Just figured it out - I can select multiple messages as you suggested when I am not in full screen mode.
    So once I come out of full screen mode - then the multiple windows open.
    QED

  • How to use the same email address for outgoing email on two iPads?

    How to use the same email address for outgoing email on two iPads?.   My wife and I both use the same email address.  We receive the same incoming email on both iPads but are unable to send email from my wife's iPad.  She is using an iPad 2 and is usng IOS 6.0.1

    Hi Creaturekeeper,
    If you've added the account into the iPad and you are unable to send email from it, then please follow the troubleshooting in the article below.
    Get help with Mail on iPhone, iPad, and iPod touch - Apple Support
    Take care,
    Alex H.

  • How to use variables with

    I need to get the number of lines in internal table, which would
    be easy, using DESCRIBE TABLE itab LINES lines. But the problem
    is, that I get the name of this internal table in the field of
    another internal table, so I have to use the name of internal
    table as variable, but I don't know how to use variables with
    DESCRIBE TABLE (or if this is possible).

    Hi,
    REPORT ZPRUEBA782 .
    define two tables with diferent structures.
    data: begin of table1 occurs 0,
    registro type i,
    end of table1.
    data: begin of table2 occurs 0,
    registro type i,
    repid like sy-repid,
    end of table2.
    data: rows type i.
    start-of-selection.
    fill them with data
    do 1000 times.
    table1-registro = sy-tabix.
    append table1.
    enddo.
    do 1757 times.
    table2-registro = sy-tabix.
    table2-repid = sy-repid.
    append table2.
    enddo.
    call a form that receives as input the table and returns the number
    of rows as output.
    perform howmanyrows tables table2 changing rows.
    break-point. "evaluate the number of rows
    perform howmanyrows tables table1 changing rows.
    break-point. "evaluate the number of rows
    end-of-selection.
    form howmanyrows tables itable changing rows.
    rows = 0.
    loop at itable.
    add 1 to rows.
    endloop.
    endform.
    You can try it if you don't find a better solution.
    Cheers,
    Chaitanya.

  • How can I get my email messages to open in one click with Mail app?

    Hello,
    How do I get my email messages to open with just one tap? On my newer Macbook I just click once on the Mail app and my messages open automatically but on the Powerbook it takes two clicks. Can this be fixed to just one click? I've gone into preferences but can't seem to change it.

    Carolyn,
    Thanks, I was wanting to just click once on a message and have it open right away and then be able to quickly go through my messages. I found the solution from another helpful Mac user. You just move the separator bar that divides your messages from the view pane and move it up and it works like a charm.

  • HT201774 How do I delete excess email messages from my iPhone.  There are 300 messages listed, and every time I delete some, more are added from old messages.  How do I limit the number of messages that can appear on my phone?  How can I delete messages i

    How do I delete excess email messages from my iPhone.  There are 300 messages listed, and every time I delete some, more are added from old messages.  How do I limit the number of messages that can appear on my phone?  How can I delete messages in bulk,

    You can't.
    All photos transferred from your computer are stored in the Photo Library. The photos in the album or albums below are not duplicates - they include a pointer to the original photos stored in the Photo Library. This way you can view the photos in a particular album only by selecting the album, or you can view all photos available in all albums by selecting Photo Library.
    Just as with an iTunes playlist. A song cannot be in an iTunes playlist unless the song is in the main iTunes library. Placing a song in a playlist does not duplicate the song. Remove the main iTunes library or the songs from the main iTunes library that are in a playlist and the songs will no longer be in the playlist either. This way you can listen to the songs in the playlist only by selecting the playlist, or all songs in your entire iTunes library by selecting Music under Library in the iTunes source list.
    The same with iPhoto on a Mac. A photo cannot be in an in iPhoto Event or Album unless the photo is in the main iPhoto library. Placing a photo in an Event or Album does not duplicate the photo. This way you can view the photos in an iPhoto Event or Album only by selecting the Event or Album, or all photos in all Events or Albums.

  • How to use @variable(bouser) in Universe to get BOE userid in Xcelsius

    Dear Expert,
    I have request that need to display BOE userid to displayed in Dashboard using Xcelsius,
    after searching in Internet, i found that it can be done by using @variable(bouser) in an object in the Universe, and use the object in Qaaws, but i don't how to use it.
    already tried insert /* @variable('BOUSER') */ in END_SQL universe parameter, but still no luck.
    my question is :
    how to use @variable(bouser) in universe? and then my Xcelsius can display the BOE userid?
    thanks in advance for any answer.
    I Using SAP Integration KIT to create universe from Query BEX
    Luqman
    Edited by: luqman hakim on Jun 29, 2010 4:03 PM

    >
    Didier Mazoue wrote:
    > Hi,
    >
    > You are mentioning that you are using SAP Integration Kit.
    > Does it mean that the source you are targeting is SAP BW?
    >
    > If it is the case, this is unfortunately not supported.
    > SAP BW MDX does not support calculated expressions that return string or date: this is a limitation of SAP BW engine.
    > This is one of the reason why a lot of user exit are used to address these needs.
    >
    > Regards
    > Didier
    Didier Mazoue 
    yes, my Data source is SAP BW, and connected to BOE via SAP INT KIT.
    It's too bad that SAP doesn't support so simple requirement.
    you said : user exit 
    are used to address these needs.
    so there are possibility to solve my problem.
    would you give me the logic of user exit?  which part I should create the user exit
    I'm quiet familiar with user exit in BW
    thanks

  • How to use variable in source path of an image  in flex

    hello
    i just want to know that how to use variable in source path
    of an image in flex

    I am doing exactly that with data binding at the moment. This
    is my Image element
    <mx:Image width="50" minHeight="50" height="76"
    source="{Application.application.parameters.api}/rest/entity/{data.Slug}/Image"
    />
    Note the curly brackets
    HTH
    Pat

  • How to use variable in topology

    Hi every one..
    how to use variable in topology

    The normal way you use in interface or procedure. But the package you are executing should have the variable in 1st step with set or refresh mode.

  • How can I delete multiple email messages on my mobile device

    HOw can I delete multiple email messages from my ipad and iPhone

    Hello conniefromtulsa,
    The process for deleting multiple messages is detailed in the iPhone User Guide:
    Delete, move, or mark multiple messages. While viewing a list of messages, tap Edit. Select some messages, then choose an action. If you make a mistake, shake iPhone immediately to undo.
    iPhone User Guide - Work with multiple messages
    http://help.apple.com/iphone/7/
    Cheers,
    Allen

  • SMP3 - AppDevelopment (Agentry):how to use GCM (Google cloud Messaging) for Agentry Application.

    Hi, I have a question on SMP3 and AppDevelopment (Agentry): how to use GCM (Google cloud Messaging) for Agentry Application for PUSH notification

    Pratik,
    Let me walk you through the flow with the assumption that the user is on an Android device and "connected" to the Agentry server.
    An emergency workorder is created in SAP and assigned to the technician. 
    The SAP backend system will notify the Agentry server via an XML message that there is a workorder to send.
    Agentry will get the details and if the user is connected attempt to send the workorder to the device via the Push mechanism
    If the push fails to reach the Agentry client, the Agentry server will send a GCM message to the user
    When the user returns to the Agentry client, the normal push processing / fetch will occur to receive the workorder from the server assuming the push retrys are in effect.
    So, essentially you should not have to do anything to get the GCM to work as a secondary notification mechanism.
    If you are looking to do something else with GCM that would be outside of Agentry.
    --Bill

Maybe you are looking for