How to use Visual Studio IDE in IAR compiler?
Hi
I want to use visual studio IDE in IAR like external editor. but I do not know how do that?
Hi,
Thank you for posting in MSDN forum.
As you said the IAR, it seems that it is a third-party tool and we are not support it. So I suggest you can post this issue directly to the IAR official website:
https://www.iar.com/Support/technical-support/ , maybe you will get better support.
Thanks for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.
Similar Messages
-
How To: Use Visual Studio, IIS Express, and Adobe Edge Inspect to view local projects
You CAN view a Visual Studio project with Adobe Inspect. The work around takes a little bit of time.
This involves using IIS Express to run your Visual Studio project, which is mainly a setting in Visual Studio, a Firewall change, a few command line and IIS Express config change. It isn't actually all that bad, but will make your life A LOT easier.
Here are the steps. (Note these are steps I used for Visual Studio 2012 and your project is part of a solution project. Windows 7 or Windows 8)
1. If IIS in not turned on, turn it on.How to: Enable Internet Information Services (IIS) - this should install IIS Express as well.
2. In Visual Studio, find the port that Visual Studio will be using for your project by Running your web project (Debug), and note/write down/save the port number that shows up in the browser when the project launches. (ex. http://localhost:12345)
3. Add a NetShare Reservation (process for this will be different for Windows XP)
Go to your Command Line (CMD) in Windows and in c:\Windows\system32> type in
netsh http add urlacl url=http://yourIPaddress:yourPortNumber user=everyone
(ex. netsh add urlacl url=http://12.34.56.78:12345 user=everyone)
Hit Enter key. You should be a successful add reservation message
3. Go to your Windows Explorer (File system) and go to c:/Users/YourName/MyDocuments (or Documents)/IISExpress/config/ and open 'applicationhost.config'
In the 'applicationhost.config' file find your site in the <sites> section.
Example:
<sites>
<site name="WebSite1" id="1" serverAutoStart="true">
<application path="/">
<virtualDirectory path="/" physicalPath="C:\MyProjects\TestSite" />
</application>
<bindings>
<binding protocol="http" bindingInformation=":12345:localhost" />
</bindings>
</site>
</sites>
In this section ADD 2 new lines to the <bindings> section. Note add your own IP address and your own Computer Name
<binding protocol="http" bindingInformation="*:12345:12.34.56.78" />
<binding protocol="http" bindingInformation=":12345:MyComputerName" />
Save the config file.
4. Open up your Windows Firewall and go to 'Advanced Settings'. Here you want to create an Inbound Rule.
Right click on Inbound Rule and select New Rule
- Rule Type select 'Custom'
- Program leave this
- Protocol and Ports > Protocol Type select 'TCP' then Local Port select 'Specific Port' and fill in the port number you got from VS. Leave Remote Port alone.
- Scope
There are a few ways of doing this. Typically you would go the the Remote IP address and select 'These IP addresses: and select ADD > select 'Predefined set of computers' and choose Local Subnet. IF this does not work leave Remote IP addresses > Any IP address option selected instead.
- Action leave this
- Profile select Domain and Private
- Name put IISExpressWeb for the name
Select 'Finish'
5. Go to Visual Studio. (Note if you have multiple projects in your solution, choose your start up project. Right click on your project in Solution Explorer in VS and select 'Set as Start Up Project' )
Right click on your start up project again and you should see an option to 'Use IISExpress'
In the DEBUG dropdown (from the main menu bar at the top) select 'YourProjectName Properties'. Mine was the last one in the list with a wrench icon next to it.
This should open an new tab in your project, You should see a left hand list of option and a right hand column of options.
In the left column select 'Web' and in this tab select Use Local IIS Web server and select 'Use IIS Express' and type in your IP Address and port number (same as before) in the Project Url text box.
Save.
NOW, you should be able to run your project in Visual Studio and use Adobe Edge Inspect on your device and view new results in Chrome. You can develop from there.
If you still can not see it working, please be sure your device is on the same SubNet or Wireless network as your computer. If you are in a large network but the domains can still see each other, the Firewall Setting detailed above to allow Any IP Address in your Scope section.Hi CMosqueda,
Thank you for taking time to share this information with other users.
Thanks,
Preran -
How to manage a connection with powershell using visual studio with C#
Hi
I want to manage a connection with powershell for a web app using visual studio with c#. and also run command with pipeline
Plz give a some suggestions..Hi Raj_Kumar_Saini,
To make things clear, could you please clarify these thing?
1. Do you mean you want to execute some PowerShell scripts from C# language? These blogposts may give you some ideas:
Executing PowerShell scripts from C#
Powershell Automation and Remoting (a c# love story)
Execute PowerShell from a ASP.NET Web Application
2. Is your question related to Visual Studio Integration? Do you want to build a Visual Studio Extension?
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
How I can use Visual Studio 2013 to create lists or libraries via remote?
Hello guys,
I use visual studio on my machine and try to create a list, but the sharepoint server is on another machine. It is possible to run a program on my computer and then create a list on the sharepoint server. If yes, how can I achieve this?
Best regards
MatthiasYou can create and manage lists and libraries using SharePoint Designer. To use Visual Studio you would have to create a SharePoint project, create a feature, define the list, etc. then create a Solution package and deploy that to the server. If you just
want to manually add a list then use Designer.
Mike Smith TechTrainingNotes.blogspot.com
Books:
SharePoint 2007 2010 Customization for the Site Owner,
SharePoint 2010 Security for the Site Owner -
How to create demand management workflow using visual studio
Hello all,
I need to create demand management workflow (Project server 2013) using visual studio 2012. I need to understand how we can write code in it. Any references??Hi Shanila,
Here are some of the articles you can use for designing workflows using Visual Studio.
Getting started Project Server 2013 Workflows :
http://msdn.microsoft.com/en-us/library/office/ee767694(v=office.15).aspx
Using workflow for Demand Management:
http://technet.microsoft.com/en-us/library/dn458861(v=office.15).aspx
Creating Project Workflows using Visual studio 2012:
http://blogs.msdn.com/b/project_programmability/archive/2012/11/07/creating-project-workflows-using-visual-studio-2012.aspx
Thanks,
Phani -
How create Windows Services in Azure using Visual Studio 2012
Hi,
I have a need to write a Windows Service (Batch Job), which would execute everyday at a specified time, say 4:00AM. This job will do some processing and will send out an email to predefined users. I am using Visual Studio 2012 for the development.
Based on some research, it looks like that Azure doesn't have a concept of Windows Service. Rather, we need to create WorkerRole to achieve the same.
I wrote the code to implement the WorkerRole. The problem, I am facing is that
1. How to prevent the continuous looping of the code below? I want the task to be executed only once a day at 4:00AM
2. How do I schedule this functionality in Azure?
Any help will be highly appreciated. I have provided the code sample below.
Thanks.
public class WorkerRole : RoleEntryPoint
public override void Run()
while (true)
SendNewsEmail();
Thread.Sleep(10000);
private void SendNewsEmail()
/*Email Logic Goes Here*/
public override bool OnStart()
// Set the maximum number of concurrent connections
ServicePointManager.DefaultConnectionLimit = 12;
return base.OnStart();HI
I think JuneT's answer is what you want.
However it's for Azure website.
If you still want to use a workerRole, you need much harder work.
You can use Timers Class to do such things:
http://stick2basic.wordpress.com/2013/02/22/how-to-schedule-a-c-windows-service-to-run-a-method-daily/
How do I schedule this functionality in Azure
I suggest you save the settings file in a cloud table, and notify your webrole using WCF service to let the service get the new settings when your changed it.
My Blog
Please use Make as Answer if my post solved your problem and use
Vote As Helpful if a post was useful. -
How to get string value from database table using Visual Studio 2005?
Hi,
Im developing plugin in illustrator cs3 using visual studio 2005. I need to get the values eneterd in database. Im able to get the integer values. But while getting string values it is returning empty value.
Im using the below code to get the values from database table
bool Table::Get(char* FieldName,int& FieldValue)
try
_variant_t vtValue;
vtValue = m_Rec->Fields->GetItem(FieldName)->GetValue();
FieldValue=vtValue.intVal;
CATCHERRGET
sprintf(m_ErrStr,"Success");
return 1;
Im using the below code to get the values.
AIErr getProjects()
char buf[5000];
int i;
std::string catName;
::CoInitialize(NULL);
Database db;
Table tbl;
errno_t err;
err = fopen(&file,"c:\\DBResult.txt","w");
fprintf(file, "Before Connection Established\n");
//MessageBox(NULL,CnnStr,"Connection String",0);
if(!db.Open(g->username,g->password,CnnStr))
db.GetErrorErrStr(ErrStr);
fprintf(file,"Error: %s\n",ErrStr);
fprintf(file, "After Connection Established\n");
if(!db.Execute("select ProjectID,ProjectName from projectsample",tbl))
db.GetErrorErrStr(ErrStr);
fprintf(file,"Error: %s\n",ErrStr);
int ProjectID;
int UserID;
int ProjectTitle;
char ProjectName[ProjectNameSize];
if(!tbl.ISEOF())
tbl.MoveFirst();
ProjectArrCnt=0;
for(i=0;i<128;i++)
buf[i]='\0';
int j=0;
while(!tbl.ISEOF())
if(tbl.Get("ProjectID",ProjectID))
fprintf(file,"Project ID: %d ",ProjectID);
ProjectInfo[ProjectArrCnt].ProjectID = ProjectID;
sprintf(buf,"%d",ProjectID);
//MessageBox(NULL, buf,"f ID", 0);
j++;
else
tbl.GetErrorErrStr(ErrStr);
fprintf(file,"Error: %s\n",ErrStr);
break;
//if(tbl.Get("ProjectTitle",ProjectName))
if(tbl.Get("ProjectName",ProjectName))
MessageBox(NULL,"Inside","",0);
fprintf(file,"ProjectTitle: %s\n",ProjectName);
//catName=CategoryName;
ProjectInfo[ProjectArrCnt].ProjectName=ProjectName;
//sprintf(buf,"%s",ProjectName);
MessageBox(NULL,(LPCSTR)ProjectName,"",0);
else
tbl.GetErrorErrStr(ErrStr);
fprintf(file,"Error: %s\n",ErrStr);
break;
ProjectArrCnt++;
//MessageBox(NULL, "While", "WIN API Test",0);
tbl.MoveNext();
//MessageBox(NULL, ProjectInfo[i].ProjectName.c_str(),"f Name", 0);
::CoUninitialize();
//sprintf(buf,"%s",file);
//MessageBox(NULL,buf,"File",0);
fprintf(file, "Connection closed\n");
fclose(file);
for(i=0;i<ProjectArrCnt;i++)
sprintf(buf,"%i",ProjectInfo[i].ProjectID);
//MessageBox(NULL,buf,"Proj ID",0);
//MessageBox(NULL,ProjectInfo[i].ProjectName.c_str(),"Project Name",0);
return 0;
In the above code im geeting project D which is an integer value. But not able to get the project name.
Please some one guide me.As I said in the other thread, this really isn't the place to ask questions about a database API unrelated to the Illustrator SDK. You're far more like to find people familliar with your problem on a forum that is dedicated to answering those kinds of questions instead.
-
How to create a three state approval workflow in SharePoint 2013 using visual studio 2013
Hi Everyone,
i have a requirement like 3 state to approve. Here is the details:- when the item added into the list it will go for reviewer. Once the reviewer review the item, he will assign the task to concern person/department(Parallel process more than two persons).
Once they will approve the request again it will come back to reviewer and he will assign the task to team member(parallel process). Once the team member accepted then workflow terminate.
i want develop this workflow using visual studio 2013 only, not using designer..
Thanks in Advance.....
MalleshHello,
you can find multiple sample on the web like those
http://www.splessons.com/2013/12/create-state-machine-workflow-in-sharepoint-2013-using-visual-studio-2012/
http://msdn.microsoft.com/en-us/library/ee231606.aspx
I don't think that's very different using VS2013 or VS2012
Best regards, Christopher.
Blog |
Mail
Please remember to click "Mark As Answer" if a post solves your problem or
"Vote As Helpful" if it was useful.
Why mark as answer? -
How open a report with Viewer 2008 without using Visual Studio and Java
Hi,
There is a way to open a report (with parameters) save in a web server with Crystal Report Viewer 2008 without using Visual Studio or Java ?
I've an asp page and i want to open this report using some command (I know asp, vbscript and html)
In the past it was very easy because we use CR 9, but now it's already many days im looking for a solution but seem impossible.
I know the craxdrt.dll is not included with Crystal Reports 2008.
It seem me i can use OpenDocument, but i'm not sure. Someone has some easy example to help me ?
Remember i have only Crystal report viewer 2008 on the server and on the clients.
Thanks in advanceIf you are looking to create a web application or view report through a web server using only Crystal Reports then you do have to either use Java, or .NET.
If you have Crystal Reports server or Business Objects Enterprise you can use OpenDocument to view managed reports but this does require one of our server products.
Trevor. -
Finding Memory leaks in C using Visual Studio 2013
I am using Visual Studio 2013, and taking a course in C programming and we started
talking about memory bugs detaction, in particular memory leaks, and how to detect them using Valgrind on Linux.
I want to know if there is a way to detect such memory leaks using VS 2013. I tried searching online but it just leads to lots of articles and blogs and msdn posts and blogs with lots of words like dump files, and analyzing them, etc which is weird
because:
1) It sounds so complex, convoluted and unintuitive it is actually hard to comprehend it.
2) The main reason this is weird is due to the fact that VS is the most advanced IDE around and Microsoft spends so much money on in, yet from what I have read it seems that there is no simple way to use VS to detect memory leaks
- certainly no way that's as simple as Valgrind where I only have to compile the program and run the command valgrind -leaks-check=yes ProgramName
and it simply prints to me all location it thinks there is a memory leak and describes the error (like not freeing memory after allocating it with malloc hence having "dead" memory after the program finishes, or accessing memory that's out of
the array bounds)
So my question is how to use VS 2013 in order to achieve the same results and to find out First in high level if there are memory leaks in the program, and Second - to detect in a simple manner where those leaks are- preferably without involving dump files
(not that I know how to use them anyway in VS).Hi MicrosoftLaw,
Thanks for your post.
Based on your issue, if you want to check if there are memory leaks in the C program from this VS2013. I suggest you could try to find Memory Leaks Using the CRT Library, for more information:
https://msdn.microsoft.com/en-us/library/x98tx3cf.aspx?f=255&MSPPError=-2147217396
In addition, I find a similar thread about this issue, please you refer the Dusty's suggestion to check this issue.
http://stackoverflow.com/questions/45627/how-do-you-detect-avoid-memory-leaks-in-your-unmanaged-code
I did some research about this issue, I found that the Visual Leak Detector extension tool is a free, robust, open-source memory leak detection system for Visual C++. So if possible, I suggest you could try to use the Visual Leak Detector extension
tool to find the memory leak for Visual C/ C++ program.
https://visualstudiogallery.msdn.microsoft.com/7c40a5d8-dd35-4019-a2af-cb1403f5939c
However, if you have any issue about how to use this Visual Leak Detector extension tool to find the memory leak for C program. I suggest you could directly to write a review to this REVIEW tab in Visual Leak Detector site.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
How to Install Visual Studio 2010 on a PC with Microsoft Office 2013 with 64 bits
I am with problems to have acess to the link: http://www.microsoft.com/en-us/download/details.aspx?id=12187
Why?
I want do install Visual Studio 2010 on a PC with Microsoft Office 2013 with 64 bits. How can I do it?
Thanks.Hello Carla Sofia,
Visual Studio installation do not depends on Microsoft Office 2013. They do not have relationship here. I think your problem is that you cannot find the link to install Visual Studio 2010.
In order to know why, please see here:
https://support.microsoft.com/en-us/lifecycle/search/default.aspx?sort=PN&alpha=Visual%20Studio%202010&Filter=FilterNO
The mainstream support for Visual Studio 2010 is already expired and that is why you cannot open any link about Visual Studio 2010 Setup.(I cannot verify whether that link is about VS2010 Setup.)
I think you need to think about the following:
1. If you need Visual Studio 2010, you may have to consider some other channels. For example, official site you can try use MSDN Subscription. For non-official site. Sorry I cannot provide any place for you
2. You can use other latest version of Visual Studio, for example, we have Visual Studio 2012, 2013, 2015 for you to use. You can also use Visual Studio Express 2010 version. It is still available for download.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
I have an application that is done using SSRS on visual studio and it connects to the report server on SQL server 2008 environment.
I've been changing the existing reports using visual studio 2008 and modifying the reports on the report server. How do I add a new report to the application ? I created a new report and deployed it on the report server but it didn't show up in the application.
I can access the application source code on visual studio 2010 and TFS (Team Foundation). Thanks.Hi,
I have a question. This application retrieves SSRS reports from the report sever. When I download the reports
from the SQL Server I can open them in visual studio 2008 but they don't open in visual studio 2010. I can access the application files on visual studio 2010 and team foundation server 2010. I was unable to open team foundation server 2008 on visual studio
2008. The issue is that I am unable to add a report with a new name to the application. I use visual studio 2008 to deploy the reports on the report server but it has to be the same name to be able to run the report from the application. I can deploy any report
on the report server but I can't access it from the application unless it has to be the same name as the present reports. If I keep the report the same name then it will replace the old report and the new report will run from the application. But only if it's
the same name. I guess when I add a new report to the application with a new name I am supposed to add a definition in the application C sharp files on visual studio 2010 so that the new report will show in the application. What's your opinion
? I have attached 2 images of the application and team foundation server 2010 and the report server.
Thanks. -
Hi All,
We are trying to execute coded UI scripts without Visual Studio installed. We are using “Visual Studio Test Agent 2010” for executing coded UI scripts without VS2010 in Windows 7, it is working fine. Also we verified executing the same script with VS2010
Premium, it works fine as well.
Here the challenge we are facing is with the Test execution time.
When we run the coded UI script with IE11-Windows 7 OS-Visual Studio 2010 Premium it takes
3min 36sec to complete the execution whereas with IE11-Windows 7 OS-Visual Studio Test Agent 2010 it takes
6min 40sec for the same script to execute (which is almost double the time it takes while executing using VS2010).
My question is what may be the reason for this difference? and how we can reduce the test execution time when running from Test Agent 2010?
Kindly let us know what is the best practice to execute the coded UI scripts with least test execution time in Windows 7 Operating system using Visual Studio Test Agent 2010 without VS2010
installed.
Looking forward for your positive response.
Thanks in advance..!!Tina-Shi, Thanks for the information.
As you mentioned, we tried to execute the coded UI test using Mstest.exe in command on VS2010 Premium and checked on the execution
time, there was a slight difference.
Please find below execution time.
Using Mstest.exe in command on VS2010 Premium/Win7 – 3.47 minutes
Using VS2010 Premium/Win7 – 3.53 minutes
Using Test Agent/Win7 – 7.3 minutes
Also, I closed all the other processes in Task manager before starting up the execution.
Still , I am facing the same Issue. Could you please suggest any other way to reduce the scripting time of coded UI script execution
through Test agent 2010.
Looking forward for your earliest response. -
Add new link on Quick Launch using visual studio
Hi,
How can I add new link on quick launch using visual studio?
I saw many link about developing quick launch or top link bar.
But they are using visual webpart to develop this function and can add
when the user add this webpart. How can I add automatically when I deploy the project.
Thanks in advance!
Best Regards, wendyusing System;
using System.Web.UI;
using System.Linq;
using Microsoft.SharePoint;
using Microsoft.SharePoint.Navigation;
namespace SPQuickLaunchAddItemWebPart.VisualWebPart1
public partial class VisualWebPart1UserControl : UserControl
protected void Page_Load(object sender, EventArgs e)
CleanUpQuickLaunch(“My Header”);
AddQuickLaunchItem(“My Header”, “http://www.google.com/q=stuff”, “My Link Here”, “http://www.google.com”);
CleanUpTopNavigationBar(“My Header”);
AddTopNavigationBarItem(“My Header”, “http://www.google.com/q=stuff”, “My Link Here”, “http://www.google.com”);
AddTopNavigationBarItem(“My Header”, “http://www.google.com/q=stuff”, “My Link Here1″, “http://www.google.com”);
public static void CleanUpQuickLaunch(string header)
using (SPSite site = SPContext.Current.Site)
using (SPWeb web = site.OpenWeb())
web.AllowUnsafeUpdates = true;
SPNavigationNodeCollection quickLaunch = web.Navigation.QuickLaunch;
// try to get quick launch header
SPNavigationNode nodeHeader = quickLaunch.Cast<SPNavigationNode>().Where(n => n.Title == header).FirstOrDefault();
//if header not found remove it
if (nodeHeader != null)
quickLaunch.Delete(nodeHeader);
public static void CleanUpTopNavigationBar(string header)
using (SPSite site = SPContext.Current.Site)
using (SPWeb web = site.OpenWeb())
web.AllowUnsafeUpdates = true;
SPNavigationNodeCollection topNavigation = web.Navigation.TopNavigationBar;
// try to get quick launch header
SPNavigationNode nodeHeader = topNavigation.Cast<SPNavigationNode>().Where(n => n.Title == header).FirstOrDefault();
//if header not found remove it
if (nodeHeader != null)
topNavigation.Delete(nodeHeader);
public static void AddQuickLaunchItem(string header, string headerURL, string item, string url)
using (SPSite site = SPContext.Current.Site)
using (SPWeb web = site.OpenWeb())
web.AllowUnsafeUpdates = true;
SPNavigationNodeCollection quickLaunch = web.Navigation.QuickLaunch;
// try to get quick launch header
SPNavigationNode nodeHeader = quickLaunch.Cast<SPNavigationNode>().Where(n => n.Title == header).FirstOrDefault();
//if header not found create it
if (nodeHeader == null)
nodeHeader = quickLaunch.AddAsFirst(new SPNavigationNode(header, headerURL, true));
nodeHeader.Update();
//try to get node item under header
SPNavigationNode nodeItem = nodeHeader.Children.Cast<SPNavigationNode>().Where(n => n.Title == item).FirstOrDefault();
//If item not found under heading then create it
if (nodeItem == null)
nodeItem = nodeHeader.Children.AddAsLast(new SPNavigationNode(item, url, true));
else
nodeItem.Url = url;
nodeItem.Update();
nodeHeader.Update();
public static void AddTopNavigationBarItem(string header, string headerURL, string item, string url)
using (SPSite site = SPContext.Current.Site)
using (SPWeb web = site.OpenWeb())
web.AllowUnsafeUpdates = true;
SPNavigationNodeCollection topNavBar = web.Navigation.TopNavigationBar;
// try to get quick launch header
SPNavigationNode nodeHeader = topNavBar.Cast<SPNavigationNode>().Where(n => n.Title == header).FirstOrDefault();
//if header not found create it
if (nodeHeader == null)
nodeHeader = topNavBar.AddAsFirst(new SPNavigationNode(header, headerURL, true));
nodeHeader.Update();
//try to get node item under header
SPNavigationNode nodeItem = nodeHeader.Children.Cast<SPNavigationNode>().Where(n => n.Title == item).FirstOrDefault();
//If item not found under heading then create it
if (nodeItem == null)
nodeItem = nodeHeader.Children.AddAsLast(new SPNavigationNode(item, url, true));
else
nodeItem.Url = url;
nodeItem.Update();
nodeHeader.Update();
above code demonstrate how to add node inside the quick launch and top navigation.
you can also follow the below link.
http://myspexp.com/2012/04/30/adding-items-to-your-quick-launch-or-top-navigation-programmatically/
Hiren Patel | Please click "Propose As Answer" if this post solves your problem or "Vote As Helpful" if this post has been useful to you. -
How to use Measurement studio math lib in VC6
dear sir,
I get the evolution version of measurement studio, which works well in DotNet and I confront with the problem that i do not know how to use measurement studio math library in VC6, please help me out ?All versions of Measurement Studio released to date include support for Visual C++ 6.0 (and Visual Basic 6.0).
This support is on a separate CD from the support for Visual Studio 2003 and Visual Studio 2005.
For example, the Measurement Studio 8.0.1 kit includes 5 CDs. One CD includes support for Visual Studio 2003 and 2005. Another CD includes support for Visual Studio 6. The other 3 CDs are Device Driver CDs.
You want to use the CD that includes support for Visual Studio 6.0. This CD contains 2 installers. First run Setup.exe. Then run MeasurementStudio6Updater.exe to get the latest components. See UpdaterReadme.htm for information on what components are updated by MeasurementStudio6Updater.exe.
Maybe you are looking for
-
XI testing for two SAP R/3 systems with same system id/logical system
Hi We are currently in the process of upgrading our R/3 4.7 to ECC 6.0 and plan to maintain dual landscape for DEV & QA (4.7 & ECC 6.0) for a period for testing and maintaining existing applications for fixes etc. The second DEV & QA (upgraded to EC
-
I need to print a grant proposal that has several input boxes that are filled beyond the viewable area. When I print the document, Not all the inputed text is printed. I have tried using a smaller font but can't get it small enough to view all the
-
Is there a C version that does what the MAX 1-D Interactive does?
Is there a C version that does what the MAX 1-D Interactive does? Or a solution to the problem below. I got the MAX 1-D Interactive to work with my stepper motor. The hardware setup is at the bottom. I am trying to write a C program in Visual Studi
-
How to give path to a boilerplate developing in windows, deploy in Solaris
Hi I want to add an image into my reports. I am developing the report in windows machine and deploy the report in UNIX machine. Could you please tell me how to do that? Regards
-
HT204053 how do I combine all my apple ids into one apple id
Is there a way to combine all my apple ids into one new apple id so all my previous purchases are on one id? Thanks