How to use WAN IP with port number in TCP Open Connection ?

I have a code to write / read a WiFi device server that gets DIO / AI data through a serial port. See attachment.
The device driver has a static IP of 192.168.1.10 and port 30704 for data stream. I have a router which links my laptop and this device driver in a LAN and all is fine.
But now I want to access my device driver through the internet. For this I already have done a port forwarding in my router to direct incoming requests on 30704 port to my device driver.
The issue : I cannot reach my device driver when I enter the WAN side IP of my router like 52.23.45.131 and the Port as 30704 in the TCP Open connection.
Any suggestions ?
Thanks
Raghunathan
LV2012 to Automate Hydraulic Test rigs.
Attachments:
Remote_Logger.vi ‏32 KB

Hello,
without looking at your vi:
Did you try to reach your device from an external Computer?
Because NAT Translation cant be done (by most routers) if you try to reach yourself from the inside.
I am correct that the device created a virtual Networkcard on your computer at which you can communicate locally, right?
Did you try to use another computer in your Network, to reach your computer and the attached device?
If it is not possible, try to enable Routing at your computer.
If it is possible, your router is not forwarding (or you answered at with "no" at the first question or both).
If you are using an external computer and the networkinternal connection from another PC is working and you are 100% sure the router is set up correctly, try to disable all local firewalls and test again. (if it works you need to setup a proper fwrule).
Regards
Rene

Similar Messages

How can I find out what port number my DB is using

How would one find out what port number a database is using? Is there a SQL command that will allow us to do this?
Thanks,
oracle_newbie

newbie
Oracle databse assigns a dynamic port number for each established session. Usually, the common port is 1521 which is defined in you tnsnames.ora, however, this is used for requesting a dynamic port. Dynamic ports are within a ragne of 1000+. That's why it is hard to tell which port you are using at a certain time. You should have a network monitoring tool to check this accurately.
Regards
null

How to run Indesign CS3 as a Service with Port number

Hello all,
I would like to run the InDesign CS3 Server as a service on Windows. It seems that after installing the Server it automatically installs as a service. But where can I assign the port number. If under Services properties of InDesign Server under Parameters I mention -port 1050 on Ok button it removes the parameter information.
I am doing right or is there some other way to start the Server as Service with Port number.
Thank you all in advance.
Regards
Farzana.

Hi Sascha,
have you tried to remove the service and install it manually?
\"Path to IDS"\InDesignServerService /install /u
\"Path to IDS"\InDesignServerService /install
I guess you've tried to start the instance in the console already (successfully?).
Regards
Ingo
Am 05.07.2011 um 12:18 schrieb 1000grad_Sascha:
Hi Ingo,
I've installed the Snap-In and configured one instance. Maybe it's worth mentioning that there are some instances running at the same time, which have been started using the console. Hope that's not interfering. However, the MMC-configured instance uses a different port.
I tried to start the service with a huge range of users having all imaginable privileges. The common way of using either "LocalService" or the Local System Account (which has admin rights for me) doesn't do the job.
cheers,
Sascha
>

Starting gateway with port number crashes in linux

Hi,
I am trying to start gateway server with port number as:
$start_ns -p 2320 (crashes with core dump).
$start_ns '-p 2320' ( starts and works fine) or start_ns "-p 2320"
Q: does this (single or double cote) is recommended way to start ?
Kindly add your comments on this.
Thanks in advance if some one can clarify this doubt.
Mangilal

Hi Wilson,
Thanks for your suggestion and help.
Since start_ns have a options to start with port number and we are testing siebel gateway under HA solutions.
This is one of the test scenario we need to test with all the options.
Same command works fine with AIX and solaris but fails in Linux.
We already referred with http://download.oracle.com/docs/cd/E14004_01/books/SystAdm/SystAdm_SrvrSysSrvc6.html..
Just need to know the purpose of using port number option while starting gateway.
We didnt found any where in Siebel docs how and why to use port number option.
Question is, how start_ns allowing with single & double cotes but not without quotes?
Kindly clarify about this , i am very much confusing.
Thanks and Reagrds,
Mangilal D

How to view and change SMTP port number in new account setup in "Mail" 10.6

When I try to set up and test a new email account addressing an SMTP server that seems to e using a nn-standard port number, how on earth can I even look at the port number assigned by default to a new account in Apple Mail 10.6 setup ?
I might have to trial and error different port numbers but when Mail tries to test the connection to the SMTP server after I enter its address, it just spins and hangs up. I suspect the reason is a wrong port number. How do I change that outgoing port number in Apple Mail ??
There seems to be no obvious way the program will let U do it or even let you view the port it assigns in apparent error.

there is no way to change the smtp port during the original account creation. you can usually wait Mail out if it's spinning its wheels at this point. I've had to wait about 15-20 minutes a few times. eventually Mail lets you through even if it fails to connect to the smtp server. then, once the account is created you can edit the smtp server and try a few different ports and settings. that's done in system preferences->accounts. click on teh smtp server at the bottom and select 'edit smtp server list". then in the popup click "advanced".

How to Check ADI Version With Patch Number?

how to Check ADI Version With Patch Number?

Hi,
To find-out the version of 'Web ADI' , there are two methods
Method : 1
+. Login to Oracle E-business Suite and using 'Web ADI' , create a Document.
+. When Excel is launched with the created Document, a Menu is created on the Toolbar in Excel called Oracle (in between Data and Window).
+. From the Oracle menu select "About". A pop up window is displayed with the version of 'Web ADI' (something like 8.x.x.x)
Method : 2
+. Login into E-business Suite as System Administrator
+. Once the Home Page is up, paste the URL below into the same Browser window (replace hostname,domain and portnumber as applicable)
BNE ADMIN Servlet for 11i
http://hostname:portnumber/oa_servlets/oracle.apps.bne.framework.BneAdminServlet
BNE ADMIN Servlet for 12
http://hostname:portnumber/OA_HTML/BneAdminServlet
Cheers
Ajikumar G
http://oracleajidba.blogspot.com/
Edited by: Ajikumar G on May 11, 2010 2:19 PM

How to use Oracle partitioning with JPA @OneToOne reference?

Hi!
A little bit late in the project we have realized that we need to use Oracle partitioning both for performance and admin of the data. (Partitioning by range (month) and after a year we will move the oldest month of data to an archive db)
We have an object model with an main/root entity "Trans" with @OneToMany and @OneToOne relationships.
How do we use Oracle partitioning on the @OneToOne relationships?
(We'd rather not change the model as we already have millions of rows in the db.)
On the main entity "Trans" we use: partition by range (month) on a date column.
And on all @OneToMany we use: partition by reference (as they have a primary-foreign key relationship).
But for the @OneToOne key for the referenced object, the key is placed in the main/source object as the example below:
@Entity
public class Employee {
@Id
@Column(name="EMP_ID")
private long id;
@OneToOne(fetch=FetchType.LAZY)
@JoinColumn(name="ADDRESS_ID")
private Address address;
EMPLOYEE (table)
EMP_ID FIRSTNAME LASTNAME SALARY ADDRESS_ID
1 Bob Way 50000 6
2 Sarah Smith 60000 7
ADDRESS (table)
ADDRESS_ID STREET CITY PROVINCE COUNTRY P_CODE
6 17 Bank St Ottawa ON Canada K2H7Z5
7 22 Main St Toronto ON Canada L5H2D5
From the Oracle documentation: "Reference partitioning allows the partitioning of two tables related to one another by referential constraints. The partitioning key is resolved through an existing parent-child relationship, enforced by enabled and active primary key and foreign key constraints."
How can we use "partition by reference" on @OneToOne relationsships or are there other solutions?
Thanks for any advice.
/Mats

Crospost! How to use Oracle partitioning with JPA @OneToOne reference?

How to use my itunes with a new pc

how to use my itunes with a new pc?

These are two possible approaches that will normally work to move an existing library to a new computer.
Method 1
Backup the library with this User Tip.
Deauthorize the old computer if you no longer want to access protected content on it.
Restore the backup to your new computer using the same tool used to back it up.
Keep your backup up-to-date in future.
Method 2
Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
Both methods should give the new computer a working clone of the library that was on the old one. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase and reload.
I'd recommend method 1 since it establishes an ongoing backup for your library.
If you have an iOS device that syncs with contact & calendar data on your computer you should migrate this information too. If that isn't possible create a dummy entry of each type in your new profile and iTunes should offer to merge the existing data from the device into the computer, otherwise the danger is that it will wipe the information from the device.
If your media folder has been split out from the main iTunes folder you may need to do some preparatory work to make it easier to move. See make a split library portable.
Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device for advice on how to set up your devices with a new library with the maximum preservation of data. If you don't have any Apple devices then see HT2519 - Downloading past purchases from the App Store, iBookstore, and iTunes Store.
tt2

How to create a table with varied number of columns?

I am trying to create a balance table. The colunms should include years between the start year and end year the user will input at run time. The rows will be the customers with outstanding balance in those years.
If the user input years 2000 and 2002, the table should have columns 2000, 2001, 2002. But if the user input 2000 and 2001, the table will only have columns 2000 and 2001.
Can I do it? How? Thanka a lot.

Why did you create a new thread for this?
How to create a table with varied number of columns?

How to use the namespace with a parser?

I want to use the namespace in my project. For this reason, I use a sample
from
http://java.sun.com/xml/jaxp/dist/1.1/docs/tutorial/sax/7b_pe.html
http://java.sun.com/xml/jaxp/dist/1.1/docs/tutorial/dom/5_ns.html
to test my understanding.
The slideshow2.dtd refer to the definition in 'xhtml.dtd'. Because in these
two files, they all use the 'title' as the element names. To solve these
conflicts, The namespace is used to qualified the one in slideshow2.dtd.
But the parser still complain that the 'title' in slideshow2.dtd is declared
more than once.
I use apache's Xerces.
I want to know if Xereces realy support namespace spec. now, or how to use
the namespace with a parser. Can anyone kindly tell me where to find some
material that demo the use of namespace in Java program.
Thanks for any help!!!
#############FILE: slideshow2.dtd ###############
<?xml version='1.0' encoding='us-ascii'?>
<!ELEMENT slideshow (slide+)>
<!ELEMENT slide (title?, item*)>
<!ENTITY % xhtml SYSTEM "xhtml.dtd">
%xhtml;
<!ELEMENT title (#PCDATA)*>
<!ATTLIST title
xmlns CDATA #FIXED "http://www.example.com/slideshow"
>
<!ELEMENT item (#PCDATA)>
##############FILE: xhtml.dtd #########################
<?xml version='1.0' encoding='us-ascii'?>
<!ELEMENT html (head)>
<!ATTLIST html
xmlns CDATA #FIXED "http://www.example.com/xhtml"
>
<!ELEMENT head (title,style*)>
<!ELEMENT title (#PCDATA)>
<!ELEMENT style (#PCDATA)>
#############FILE: slideshow.xml ####################
<?xml version='1.0' encoding='utf-8'?>
<!DOCTYPE slideshow SYSTEM "slideshow2.dtd">
<slideshow>
<slide>
<title xmlns="http://www.example.com/slideshow">Wake up to
products!</title>
</slide>
</slideshow>

I want to use the namespace in my project. For this reason, I use a sample
from
http://java.sun.com/xml/jaxp/dist/1.1/docs/tutorial/sax/7b_pe.html
http://java.sun.com/xml/jaxp/dist/1.1/docs/tutorial/dom/5_ns.html
to test my understanding.
The slideshow2.dtd refer to the definition in 'xhtml.dtd'. Because in these
two files, they all use the 'title' as the element names. To solve these
conflicts, The namespace is used to qualified the one in slideshow2.dtd.
But the parser still complain that the 'title' in slideshow2.dtd is declared
more than once.
I use apache's Xerces.
I want to know if Xereces realy support namespace spec. now, or how to use
the namespace with a parser. Can anyone kindly tell me where to find some
material that demo the use of namespace in Java program.
Thanks for any help!!!
#############FILE: slideshow2.dtd ###############
<?xml version='1.0' encoding='us-ascii'?>
<!ELEMENT slideshow (slide+)>
<!ELEMENT slide (title?, item*)>
<!ENTITY % xhtml SYSTEM "xhtml.dtd">
%xhtml;
<!ELEMENT title (#PCDATA)*>
<!ATTLIST title
xmlns CDATA #FIXED "http://www.example.com/slideshow"
>
<!ELEMENT item (#PCDATA)>
##############FILE: xhtml.dtd #########################
<?xml version='1.0' encoding='us-ascii'?>
<!ELEMENT html (head)>
<!ATTLIST html
xmlns CDATA #FIXED "http://www.example.com/xhtml"
>
<!ELEMENT head (title,style*)>
<!ELEMENT title (#PCDATA)>
<!ELEMENT style (#PCDATA)>
#############FILE: slideshow.xml ####################
<?xml version='1.0' encoding='utf-8'?>
<!DOCTYPE slideshow SYSTEM "slideshow2.dtd">
<slideshow>
<slide>
<title xmlns="http://www.example.com/slideshow">Wake up to
products!</title>
</slide>
</slideshow>

How to Create Business Partner with fix number in t-code :BP

Dear SIr,
Normally I will set number range for auto to create Business Partner. In case , If we would like to crea How to Create Business Partner with fix number in t-code :BP , howe to do?
Please kindly advise.
THnak you and best regards,
Vimol

Dear Shobhit,
How to put the thread as you mentioned.
Best regards,

How to use union statement with declare & set function?

Hi Experts,
i have small query about how to use union statement with declare & set function?
Example as below :
DECLARE @name AS date
Declare @name2 AS date
/* SELECT FROM [2013].[dbo].[OINV] T0 */
/* WHERE */
SET @name = /* T0.DocDate */ '[%1]'
SET @name2 = /* T0.DocDate */ '[%2]'
select '2013',t5.U_salmannm,t1.CardName,t2.sumapplied as CollectionAmount,t2.DcntSum ,t3.DocTotal as InvoiceTotal,
datediff(dd,t3.DocDate,t1.Docdate) as Days
from 2013.dbo.orct t1
inner join 2013.dbo.RCT2 t2 on t1.DocNum = t2.DocNum
left join 2013.dbo.oinv t3 on
t3.docentry = t2.baseAbs
inner join 2013.dbo.ocrd t4 on t1.Cardcode = t4.CardCode
inner join [2013].[dbo].[@CQ_RTSM] t5 on t4.U_BeatCode = t5.U_RoutCode
where t2.DcntSum <> 0.000000 and t3.DocDate between [%1] and [%2]
Union
/* SELECT FROM [2014].[dbo].[OINV] T0 */
/* WHERE */
SET @name = /* T0.DocDate */ '[%1]'
SET @name2 = /* T0.DocDate */ '[%2]'
select '2014',t5.U_salmannm,t1.CardName,t2.sumapplied as CollectionAmount,t2.DcntSum ,t3.DocTotal as InvoiceTotal,
datediff(dd,t3.DocDate,t1.Docdate) as Days
from 2014.dbo.orct t1
inner join 2014.dbo.RCT2 t2 on t1.DocNum = t2.DocNum
left join 2014.dbo.oinv t3 on
t3.docentry = t2.baseAbs
inner join 2014.dbo.ocrd t4 on t1.Cardcode = t4.CardCode
inner join [2014].[dbo].[@CQ_RTSM] t5 on t4.U_BeatCode = t5.U_RoutCode
where t2.DcntSum <> 0.000000 and t3.DocDate between [%1] and [%2]

You have to create stored procedure in SQL only .
Like u must have create for Crystal .
You can execute procedure in query manager but you have to enter parameter manually..
example
Exec @Test '20140101' '20140501'
Every time user has to enter it manually in yyyymmdd format in case of date parameters.
Example
Create Proc [@Test]
as begin
DECLARE @name AS date
Declare @name2 AS date
/* SELECT FROM [2013].[dbo].[OINV] T0 */
/* WHERE */
select '2013',t5.U_salmannm,t1.CardName,t2.sumapplied as CollectionAmount,t2.DcntSum ,t3.DocTotal as InvoiceTotal,
datediff(dd,t3.DocDate,t1.Docdate) as Days
from 2013.dbo.orct t1
inner join 2013.dbo.RCT2 t2 on t1.DocNum = t2.DocNum
left join 2013.dbo.oinv t3 on
t3.docentry = t2.baseAbs
inner join 2013.dbo.ocrd t4 on t1.Cardcode = t4.CardCode
inner join [2013].[dbo].[@CQ_RTSM] t5 on t4.U_BeatCode = t5.U_RoutCode
where t2.DcntSum <> 0.000000 and t3.DocDate between @Name and @Name2
Union
/* SELECT FROM [2014].[dbo].[OINV] T0 */
/* WHERE */
select '2014',t5.U_salmannm,t1.CardName,t2.sumapplied as CollectionAmount,t2.DcntSum ,t3.DocTotal as InvoiceTotal,
datediff(dd,t3.DocDate,t1.Docdate) as Days
from 2014.dbo.orct t1
inner join 2014.dbo.RCT2 t2 on t1.DocNum = t2.DocNum
left join 2014.dbo.oinv t3 on
t3.docentry = t2.baseAbs
inner join 2014.dbo.ocrd t4 on t1.Cardcode = t4.CardCode
inner join [2014].[dbo].[@CQ_RTSM] t5 on t4.U_BeatCode = t5.U_RoutCode
where t2.DcntSum <> 0.000000 and t3.DocDate between
between @Name and @Name2
end

How to use Stylesheet (XSL) with JSPX ?

Hi!
How to use XSL stylesheets with JSPX pages?
I want use an xsl transformations with jspx pages, I tried using the following syntax, but it didn't work....
<?xml version='1.0' stylesheet type="text/xsl" href="mathml.xsl" encoding='UTF-8'?>
<tr:html xmlns="http://www.w3.org/1999/xhtml">
what is the best way to use xslt with jspx pages?
Thanking you in advance,
Samba

Thanks Ric,
But My problem is not solved..
I'm getting the transformation working in plain HTML
The file given below :
<?xml-stylesheet type="text/xsl" href="mathml.xsl"?>

<html xmlns="http://www.w3.org/1999/xhtml"
>
<head>
<title>Content MathML Examples</title>
</head>
<body>
<div style="border-style:solid; border-width:1px; margin: 1em 1em 1em 1em; padding: 1em 1em 1em 1em;color:gold;background:grey;">
<pre><![CDATA[<math xmlns="http://www.w3.org/1998/Math/MathML">
<apply>
<eq/>
<apply>
<abs/>
<ci> x </ci>
</apply>
<piecewise>
<piece>
      <apply><minus/><ci> x </ci></apply>
      <apply><lt/><ci> x </ci> <cn> 0 </cn></apply>
</piece>
<piece>
      <cn> 0 </cn>
      <apply><eq/><ci> x </ci> <cn> 0 </cn></apply>
</piece>
<piece>
      <ci> x </ci>
      <apply><gt/><ci> x </ci> <cn> 0 </cn></apply>
</piece>
</piecewise>
</apply>
</math>]]>
</pre>
<math xmlns="http://www.w3.org/1998/Math/MathML">
<apply>
<eq/>
<apply>
<abs/>
<ci> x </ci>
</apply>
<piecewise>
<piece>
      <apply><minus/><ci> x </ci></apply>
      <apply><lt/><ci> x </ci> <cn> 0 </cn></apply>
</piece>
<piece>
      <cn> 0 </cn>
      <apply><eq/><ci> x </ci> <cn> 0 </cn></apply>
</piece>
<piece>
      <ci> x </ci>
      <apply><gt/><ci> x </ci> <cn> 0 </cn></apply>
</piece>
</piecewise>
</apply>
</math>
</div>
</body>
</html>But the same thing is not working when put in jspx page..
And I tried to use JSTL as you have suggested :
But the content is not getting transformed.
Here is the jspx page :
<?xml version='1.0' encoding='UTF-8'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.0"
          xmlns:h="http://java.sun.com/jsf/html"
          xmlns:f="http://java.sun.com/jsf/core"
          xmlns:af="http://xmlns.oracle.com/adf/faces/rich"
          xmlns:c="http://java.sun.com/jsp/jstl/core"
          xmlns:x="http://java.sun.com/jsp/jstl/xml"
          xmlns:m="http://www.w3.org/1998/Math/MathML"
          xmlns:xh="http://www.w3.org/1999/xhtml">
<jsp:directive.page contentType="text/html;charset=UTF-8"/>
<f:view>
    <af:document binding="#{backing_xsltTest.document1}" id="document1">
<div style="border-style:solid; border-width:1px; margin: 1em 1em 1em 1em; padding: 1em 1em 1em 1em;color:gold;background:grey;">
<f:verbatim>
<pre><![CDATA[<math xmlns="http://www.w3.org/1998/Math/MathML">
<apply>
<eq/>
<apply>
<abs/>
<ci> x </ci>
</apply>
<piecewise>
<piece>
      <apply><minus/><ci> x </ci></apply>
      <apply><lt/><ci> x </ci> <cn> 0 </cn></apply>
</piece>
<piece>
      <cn> 0 </cn>
      <apply><eq/><ci> x </ci> <cn> 0 </cn></apply>
</piece>
<piece>
      <ci> x </ci>
      <apply><gt/><ci> x </ci> <cn> 0 </cn></apply>
</piece>
</piecewise>
</apply>
</math>]]>
</pre>
</f:verbatim>
<c:import var ="mathml" url="/mathml.xsl"/>
<x:transform xslt="${mathml}">
<math xmlns="http://www.w3.org/1998/Math/MathML">
<apply>
<eq/>
<apply>
<abs/>
<ci> x </ci>
</apply>
<piecewise>
<piece>
      <apply><minus/><ci> x </ci></apply>
      <apply><lt/><ci> x </ci> <cn> 0 </cn></apply>
</piece>
<piece>
      <cn> 0 </cn>
      <apply><eq/><ci> x </ci> <cn> 0 </cn></apply>
</piece>
<piece>
      <ci> x </ci>
      <apply><gt/><ci> x </ci> <cn> 0 </cn></apply>
</piece>
</piecewise>
</apply>
</math>
</x:transform>
</div>
      <af:form binding="#{backing_xsltTest.form1}" id="form1">
      </af:form>
    </af:document>
</f:view>

</jsp:root>Can you please suggest where I'm doing wrong?
Thanking you in advance,
Samba

How to use File Adapter with hierarchial Structure?

Hi,
How to use File Adapter with hierarchial Structure like..
Data:
--Header Details:
Line Item Details:
Data
Bcoz I am getting a Flatfile in a hierarchial way as shown below.
Header Details :1
Line Item a
Line Item b
Header Details :2
Line Item c
Line Item d
Kishore

Hey Kishore,
In order to create a structure you need to use the file with convertion mode on the sending communication channel of the file adapter.
check the link for the needed configuration paramters.
If the structure is more complexed you can use the Contetnt master(CM) from itemfield which allows to ceate XML file from complex flat files and more.
<a href="http://help.sap.com/saphelp_erp2005/helpdata/en/0d/5ab43b274a960de10000000a114084/frameset.htm">File sender adapter</a>
If you have any question i'll be more than happy to assist.
Nimrod Gisis

Does anyone know step by step how to use a PC with an AppleTV?

Does anyone know how to use a PC with an AppleTV and can this be done and if so, how?

Welcome to the Apple Community.
How far have you got into the set up process please.

How to use WAN IP with port number in TCP Open Connection ?

Similar Messages

Maybe you are looking for