How to use webcam on HP 310-1155f

I've had the computer for years and never used the webcam.  Now I want to and can't locate "Mediasmart" on the computer and can't dig out the info from the web on how to turn on/use the webcam.  Could use clear directions on how to aquire Mediasmart if that is the only way to utilize the webcam.  Thanks.

Hi,
Please check the following manuals:
   http://h10032.www1.hp.com/ctg/Manual/c01215930.pdf
and you may need HP MediaSmart Webcam Software. Please download and install on your machine (for Windows 7):
ftp://ftp.hp.com/pub/softpaq/sp45501-46000/sp45692.exe
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • How to use webcam for Yahoo Messenger on MacBook Pro, How to use webcam for Yahoo Messenger on MacBook Pro

    How to use webcam for Yahoo Messenger on MacBook Pro, How to use webcam for Yahoo Messenger on MacBook Pro because it's not working =(

    The cheap & easy way is to just drag the app to the Trash.
    If you want to get all of the associated files use an app deleting app like the free AppCleaner;
    http://www.freemacsoft.net/appcleaner/
    Just drag an app and drop it on the AppCleaner icon in the Dock and it will find and present to you all the files it thinks are associated with the app. You can uncheck any that you want to keep and then let AppCleaner Trash the rest.

  • How to use webcam in windows 7?

    I bought a dell inspiron 15 laptop and i installed windows 7 32bit.But i don't know how to open webcam.can someone tell me please :)

    Hi,
    Here is a guide from Dell official website for you:
    Using and Troubleshooting the Dell Webcam and Dell Webcam Central Software           
    http://www.dell.com/support/troubleshooting/us/en/19/KCS/KcsArticles/ArticleView?c=&l=&s=&docid=266612
    Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
    Karen Hu
    TechNet Community Support

  • How to use webcam

    how to use webcam

    Hey,ninorosa.
    What notebook do you have ?
    Windows 7 or 8 ? 
    Could you please give us a little more information on the issue or question you have.
    Seems to me you just want to know hoe to use it. 
    THX

  • How to use built-in webcam for Skype?

    How does one use the built-in webcam online? My iMac's webcam can be accessed through Photo Booth, but only, it appears, to take photos or brief movies. I've searched this forum, but don't find how one can use the webcam online such as in Skype. A program called iSight is mentioned in several posts, but my year-old iMac doesn't have that program. Any clues on how to use the camera beyond Photo Booth? Many thanks.

    HI Bob,
    You can use Skype with your iMac and iSight.
    Go here, download Skype
    The Skype application will be installed to your Applications folder. Launch Skype. You will need to create a username and password. Once you have logged into Skype from the Menu Bar at the top of your screen click Skype/Preferences and selec the Video tab. Click the pop up menu where you see: Camera and select: Built-in iSight
    More about using Skype here.
    https://support.skype.com/
    Carolyn

  • HT1338 how to use a webcam in a mac pro?

    How to use a webcam on a mac pro?

    Generally, plug it in.
    The OS should notice most major webcams, although you might need to install some software from the vendor to make it work. You'll need to check specific make/models for compatibility.
    Once it's connected it should be available in any application that supports video input.

  • How to use a webcam with Labview8,Vision 8 in motion tracking?

    I have a webcam and Labview 8, Vision Assistant Module 8, NI IMAQ for USB Cameras. What I concern is how to use a webcam in motion tracking? Should I just use Vision assistant or use it in combination with Labview? Do I need any other support?

    4,
    Thanks for your post.  Vision Assistant is a good software package to prototype your system, but it does not give you access to all Vision methods.  LabVIEW is much more powerful allowing full access to Vision.  You may want to use Vision Assistant to play with the algorithms (you can use your mouse to set regions of interest, etc) and then once you find the methods and parameters that work, implement the code in LabVIEW.
    Thanks,
    Scott Savage
    National Instruments
    Applications Engineering
    www.ni.com/support

  • How to use other webcam?

    I'm sorry if my topic is a bit vague, not sure how else to word it. Anyway, I was wondering how to use a different webcam (logitech)? It came with a disc so I can install the software, but how do I make it my default?
    Thanks

    Hello DerangedSmile,
    Let us know what model Logitech cam you have. And see if it's listed here:
    http://www.ecamm.com/mac/ichatusbcam/configs.html
    I'm assuming you've checked preferences and the webcam does or does not show up as a choice? Probably the disc that you have has MS drivers only. If so, you might consider the above link/product.
    Respectfully,
    Bill Gallagher

  • CAMILEO P30 - how to use it as a webcam ?

    I am to able to turn on the webcam function despite it is advertised
    How to use/configure ?
    rgds

    I have checked cam specification on http://www.toshiba-multimedia.com and also in user??s manuals document but I didn??t find a word about webcam function.
    Can you please tell me where you found info about this cam mode? Where is this advertised? On Toshiba page?

  • How to view image by using webcam at other computer.

    I am student. Now I make one project by using LabVIEW software. 
    Now, my question is:
    I have two computer, both computer got install software LabVIEW. And the programming for viewing image by using webcam already finished done.
    Now is, I want to open Webcam at computer B from Computer A. I already search, found that techique "Web Publishing Tools" can do this. Beside this, got another easier technique to do this?       

    There are other ways in which you can transfer images over the network but you will need to do some programming for it. Have a look at the following links:
    Streaming IMAQ Images Over a Network (or Internet)
    Transfer Images Over the Network
    Adnan Zafar
    Certified LabVIEW Architect
    Coleman Technologies

  • How to...snapshot with delay using Webcam Center ?

    Hi all,
    I was wondering if I could take some snapshot with a certain delay using Webcam Center ?
    Meaning I click on the snapshot button and I got like 0 secs to move on before I got the screen.
    And if that's not possible using Webcam Center, would you know any other soft doing that ?
    Thanks for your time.

    I have done this in the past by using a command line version of putty called plink.exe
    http://www.chiark.greenend.org.uk/~sgtatham/putty/
    call plink.exe with the systemexec.vi using the command line parameters of any ssh commands
    - James
    Using LV 2012 on Windows 7 64 bit

  • Where to locate and how to use the filter thershould to binarized image

    Good morning friends. I am using
    Labview with VDM and let me know where to locate and how to use the
    filter thershould. Also that parameters used to binarized image captured
    via webcam and display it in black and white.
    Thank you very
    much.

    Is the image that you are getting a RGB one? Use color plane extraction and then use a binary threshold to convert it into a binary image. You can also directly use a color threshold and convert a rgb (color) image to a binary image.

  • How to install a samsung clp 310 driver in the time capsule

    how to install a samsung clp 310 driver in the time capsule ?

    You do not install the printer driver on the Time Capsule, you install it on your Mac.
    Check with Samsung Support for details on how to download and install the driver to your Mac.
    Then use System Preferences > Print & Scan to see if your printer is compatbile. Not all printers are compatible with the USB port on the Time Capsule, so if your printer does not appear, it ls likely not compatible for this purpose.

  • How to use iSight camera as security centre

    How to use iSight camera as security centre

    can you elaborate?
    security centre can be many things
    and most hardware and network setups would likely not work with usb webcams
    but again it really depend on what you mean by security centre

  • How to use PGRFlyCapture in Ubuntu

    hi, i am using javacv in my ubuntu, i have motion detection code that completely works on usb webcam but it's not working on flycap. can anyone tell me how to use PGRFlyCapture in Ubuntu?

    Found the solution. The detailed answer can be found here:
    java - How to install SIGAR on Ubuntu-based Linux? - Stack Overflow

Maybe you are looking for

  • I Need Interactive Report for displaying vendor information. Based on the s

    Interactive Report for displaying vendor information. Based on the selection made by the corresponding Vendor Bank Details are listed such that the line selected in the basic list was visible along with the secondary list.

  • Issue with B2B Simulator for testing Healthcare Integration in SOA 11.1.1.6

    Hi All, I've installed the healthcare integration patch on top of SOA 11g PS5, and am now trying out the integration scenarios as detailed here . When running the B2B simulator as detailed in the readme, I'm able to see that the ADT file is polled fr

  • Import templates for iBooks Author

    How can I import more new book templates for iBooks Author?

  • Bayer Filter and colour balance.

    Hi all. I have recently been acquiring images using a mikrotron MC1363 camera and LV code 'Grab and save to AVI'. I have then used ImageJ to create a stack of U8 images. My problem then arises in that I need to apply a bayer filter and colour balance

  • TileLayout spark Item Renderer and Zoom in and zoom out

    I implemented a spark ItemRenderer, which serves a DataGroup with TileLayout:     <s:Border id="scrollView"               styleName="scrollView"               width="100%"               height="100%">         <s:filters>             <s:DropShadowFilt