How to use WebCenter Spaces 11g 2.0 Services in WebCenter Interaction 10gR3
Hi,
Can someone explain how to use WebCenter 11g Web 2.0 Services in WebCenter Interaction 10gR3. I have installed Webcenter 11g Spaces. I also have Webcenter Interaction 10gR3 installed. Wanted to find out how can I make use of 11g web 2.0 services i.e. wiki,blog,discussions etc. in WCI 10gR3. How can I configure those services in 10gR3.
As reading oracle notes it says there is a seemless integration of Web 2.0 11g Services in WCI 10gR3 but can't find any steps, tutorials or examples on how to do that. Any help is appreciated.
Thanks.
guest0012 wrote:
As reading oracle notes it says there is a seamless integration of Web 2.0 11g Services in WCI 10gR3 but can't find any steps, tutorials or examples on how to do that.Nothing like that seamless integration with zero documentation:)
Similar Messages
-
Integration of Microsoft OCS 2007 with WebCenter Spaces 11G PS4
Hi All,
I want to know has anyone successfully integrate Microsoft OCS 2007 with WebCenter Spaces 11G PS4? If yes, pls share detail. Thank you.
Regards,Hi,
I am also facing the same issue, not sure about what url to use. And also the login webservice doesn't work while I am testing using http://localhost:81/RTC/RTCService.asmx. It always throwing the following error
" Unable to cast COM object of type 'RTCLib.RTCClientClass' to interface type 'RTCLib.IRTCClient'. This operation failed because the QueryInterface call on the COM component for the interface with IID '{07829E45-9A34-408E-A011-BDDF13487CD1}' failed due to the following error: No such interface supported (Exception from HRESULT: 0x80004002 (E_NOINTERFACE))."
Is the current owc_lcs.zip support MS Office Communication Server 2007?
Please share the configuration step if anyone already integrated OCS 2007.
Thanks,
-Mukesh.
Edited by: user9127933 on Feb 19, 2010 4:05 AM -
Webcenter spaces 11g - show BI EE reports
Hi All ,
I have several reports in BI EE 10.1.3.4 and I would like to display this reports into WebCenter Spaces 11g, someone could help me?
Tks
CarloI don't think you'll find many users of Spaces in this discussion board since this has a primary audience of WebCenter Interaction customers.
For questions about Spaces you should either request a new discussion board be created (I'm surprised they haven't done this yet) or just post to the WebCenter Services board: http://forums.oracle.com/forums/forum.jspa?forumID=733 -
How to use Batch operation for two xsodata services?
Hi All,
I have two xsodata services. How to use submit batch for two xsodata services
Thanks,
MjGateway Batch Calls from SAPUI5
-
Content Server in WebCenter Spaces 11g
Hi,
I configured both WebCenter 11g and Oracle Content Server to use OID. I created a connection in WebCenter using CIS Type as Socket and gave the hostname/port along with other settings but in WebCenter Spaces I still can't see the repository and it it says Document Service is unavailable. Any idea what might be missing as I followed the documentation but it's not very clear.
ThanksHi,
Yes it is Spaces and the connection is configured on Enterprise Manager. I manage to solve the issue as I didnot create any Roles in Content Server for the Groups that exists in Active Directory. But this in-turn started giving other errors that I am not able to figure out.
Now when I log in with any Active Directory user into WebCenter Spaces and try to include a Document Service it gives me the below errr:
OracleJSP error: java.io.FileNotFoundException: <p> Set the init-param <code> debug_mode</code> to "true" to see the complete exception message.Now if I log-in with weblogic user that is not part of Active Directory it does let me add the Document Service can upload documents etc. but won't let me create the pages while creating page it says user weblogic doesnot exist. So basically wit active directry users I can create page but not use document service and with weblogic user it's the other way round. Any ideas what I am doing wrong as the documentation is not even clear either and how can i solve this issue.
Is there any good document out there that does explain all this.
Any help isappreciated.
Thanks. -
WebCenter Spaces UCM configuration - GET_ENVIRONMENT service call issue
After installing and configuring UCM, then WebCenter Spaces, the startup of WebCenter should create a content folder in UCM. However the connectivity between WebCenter and UCM causes an error in the log files:
On the UCM-side:
<Nov 9, 2011 2:35:11 PM HKT> <Error> <oracle.ucm.idcibr> <UCM-CS-000001> <general exception
intradoc.common.ServiceException: !csUnableToLoadEnvironment2!csUnableToExecMethod,loadEnvironmentVars
at intradoc.server.ServiceRequestImplementor.buildServiceException(ServiceRequestImplementor.java:2115)
Caused By: java.lang.NullPointerException
at intradoc.common.TableUtils.getIndexList(TableUtils.java:34)
On the WebCenter-side:
<Nov 9, 2011 2:35:11 PM HKT> <Warning> <oracle.webcenter.content.integration.spi.ucm.UCMBridge> <WCS-55028> <Error calling UCM server associated with repository UCMConnection. The service GET_ENVIRONMENT was called with user weblogic at time 11/9/11 2:35 PM, and returned statuscode -32.
oracle.stellent.ridc.protocol.ServiceException: Unable to load environment. Unable to execute service method 'loadEnvironmentVars'. The error was caused by an internally generated issue. The error has been logged.
at oracle.stellent.ridc.protocol.ServiceResponse.getResponseAsBinder(ServiceResponse.java:135)
I did some 'sniffing' of the socket requests between the two and here they are:
WebCenter sends:
REMOTE_USER=weblogic
USER-AGENT=Java; Stellent CIS 11g; Oracle WebCenter 11g
CONTENT_TYPE=text/html
HEADER_ENCODING=UTF-8
REQUEST_METHOD=POST
CONTENT_LENGTH=204
HTTP_HOST=CIS
$$$$
NoHttpHeaders=0&IsJava=1&IdcService=GET_ENVIRONMENT
<?hda jcharset=UTF-8?>
@Properties LocalData
ClientEncoding=UTF-8
IdcService=GET_ENVIRONMENT
UserTimeZone=UTC
UserDateFormat=iso8601
ThreadID=15
@end
UCM replies with:
Content-type: text/plain; charset=utf-8
Content-Length: 531
<?hda version="11gR1-11.1.1.5.0-idcprod1-110413T184243" jcharset=UTF8 encoding=utf-8?>
@Properties LocalData
StatusCode=-32
blFieldTypes=StatusMessage message
IdcService=GET_ENVIRONMENT
ClientEncoding=UTF-8
UserTimeZone=UTC
UserDateFormat=iso8601
NoHttpHeaders=0
ThreadID=15
StatusMessage=Unable to load environment. Unable to execute service method 'loadEnvironmentVars'. The error was caused by an internally generated issue. The error has been logged.
dUser=weblogic
blDateFormat=yyyy-MM-dd HH:mm:ssZ!tUTC!mAM,PM
IsJava=1
@end
Thanks in advance for any insight into this issue.
Edited by: Snowy on Nov 9, 2011 12:45 AMIt turns out, the "Intradoc ServerPort" was not set in UCM. In Enterprise Manager: Content Server: Oracle Universal Content Management: Configuration, it was blank. As soon as I set this to "4444" and restarted it fixed this error.
I'd like to thank all who contributed. -
How to use a xquery in OSB Proxy service?
I have created a xquery and added to alsb. I wanted to use it in a proxy service to replace an element in $body. How can i do it?
Using Replace action in your proxy service flow:
http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/eclipsehelp/tasks.html#wp1121647
http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/eclipsehelp/ui_ref.html#wp1298470 -
How To Configure Oracle BPM 11g Process Portal on Oracle WebCenter Spaces
After setting the file process-portal-install.properties and have set the path environment variable to the ANT.
When i execute a command ant -f install.xml i can see the next error
[exec] Updating deployment targets for the datasources...
[exec] This Exception occurred at Tue Dec 18 14:32:49 EST 2012.
[exec] javax.management.InvalidAttributeValueException: Array has at least one null element
[exec] Problem invoking WLST - Traceback (innermost last):
[exec] File "/opt/oracle/Middleware/Oracle_SOA1/bpm/process_spaces/wc-post-install.py", line 253, in ?
[exec] File "/opt/oracle/Middleware/Oracle_SOA1/bpm/process_spaces/wc-post-install.py", line 112, in updateTargets
[exec] File "", line 581, in set
[exec] File "", line 1847, in raiseWLSTException
[exec] WLSTException: Error occured while performing set : Error setting attribute Targets : Array has at least one null element
[exec] Use dumpStack() to view the full stacktrace
[exec]
BUILD FAILED
/opt/oracle/Middleware/Oracle_SOA1/bpm/process_spaces/install.xml:207: exec returned: 1
Someone know the cause of this error??
Thanks in advanceHi;
I belive you can follow this thread if you insist to make 11g installation on ubuntu. But as installation documents refer Ubuntu is not a certified platform yet for 11gr2,you can find details on below docs. (I suggest use OEL platform which is free and certified wiht Oracle 11gR2 db)
http://download.oracle.com/docs/cd/E11882_01/install.112/e16763/pre_install.htm#CIHFICFD
Certified platform for 11gR2
On Linux x86:
Asianux Server 3 SP2
Oracle Enterprise Linux 4 Update 7
Oracle Enterprise Linux 5 Update 2
Red Hat Enterprise Linux 4 Update 7
Red Hat Enterprise Linux 5 Update 2
SUSE Linux Enterprise Server 10 SP2
SUSE Linux Enterprise Server 11
On Linux x86-64
Asianux Server 3 SP2
Oracle Enterprise Linux 4 Update 7
Oracle Enterprise Linux 5 Update 2
Red Hat Enterprise Linux 4 Update 7
Red Hat Enterprise Linux 5 Update 2
SUSE Linux Enterprise Server 10 SP2
SUSE Linux Enterprise Server 11
Regard
Helios -
How to use the space on the form which is coming when hide the elements
Hi,
I have an issue with the white space coming when I am making subform visible/hidden using java script based on condition.
Let me explain the complete scenario. I have created an adobe form for printing invoice details, basically I have two pages, the second page is used to handle overflow content from first page and the requirement is that we should show totals section on last page only when we multple page invoice output. To do that I have written a script on second page for total sub form in such a way that the subform will be visible only on last page and will be not visible on any other page. But due to hiding the element I am getting white space in other pages which I dont want. I want to continue to print the items deatisl in that place to use that empty space.
Can you guys help me to solve this.
Thanks,
SumanHi Radzmar,
Thanks for your reply.I will try this option and will update you.
I have one more thing to ask. I want to give some space between rows in the table. Can you suggest me how do i achieve this.
Regards,
Suman -
Satellite L350 - how to use free space on hard drive?
Hi
Wonder if anyone can help please?
We have a Toshiba Satallite L350 with 500gb of HD. Over the past few weeks the laptop has been getting very sluggish ( carried out de frag etc which helped ) however, today I tried to add something to my laptop and was told we have no spare disc space!!!
On looking at the computer it appears I have 2 drives ( C & D ) and the C drive is almost full yet the D drive is nearly empty!! No matter what I try I am unable to transfer anything over to the D drive so it is 'sat there' doing nothing!!! All that is showing on here is the HDD recovery from intiial setup. I never even realised that the 2 drives were there, asuming the 500gb will be used when you need it!
Can someone give me an idea on how / what I need to do to make use of this extra 250gb of HD and enable me to use the laptop to it's full potential?
Many thanks
Mark / Hereford / UKHi
First of all the second partition (D) contains the recovery files and this is needed to create a recovery disk and to recover the notebook using HDD recovery option.
But this should be explained in user manual.
However, I dont see any reason why you should not be able to move some files like mp3, videos, or pictures to the D partition. This should be possible.
Of course its not possible to move an installed programs if you have installed such program on C partition.
In such case you would need to uninstall such software and would need to install it again on D partition.
Nevertheless you could also increase the volume of C partition by shrinking the D partition and adding the free space to C.
To do that, you need some 3rd party partitions software.
I could recommend you usage of Gparted software. its freeware and can be downloaded from internet. Google for that.
Additionally you could clean the system to get rid of some temporal stored files.
CCleaner is a good freeware tool which cleans the system. -
How to use blank space replace NULL on discoverer viewer
Hi,
There is a report that has a varchar field should show text values, and if NULL, I need it show blank space, and does in disco desktop, but on viewer, the same worksheet shows NULL.
Even I changed in the Tools - Options - Format menu(desktop), it still show NULL on viewer.
why?
please help! thanks!
sammyHi Sammy,
Unfortunately ‘some’ of the settings set in Desktop do not carry over to Viewer. These options need to be defined for Viewer itself.
A temporary way to set the Viewer settings is to click on ‘Options’ when logged in Viewer itself. You’ll have to open a responsibility or report before this option becomes available to select. Within here you’ll be able to change the way NULL values are seen. However this method only makes the change for the User you logged in with.
To make the change for all users, it’s best to edit the PREF.TXT file on the Discoverer Server. Please view the documentation below for more information on how to configure Viewer. For windows platform click here : http://download-uk.oracle.com/docs/html/A90287_01/toc.htm,
For Unix platform click here : http://download-uk.oracle.com/docs/html/A90288_01/toc.htm. Once you’ve run the applypreference script, these settings will be forced down to all users of Discoverer.
Hopefully this will help ;-)
Lance -
How much used up space is too much?
I bought an 80 GB harddrive with my MBP (which was only 72 according to my specs)... and I thought it would be plenty... but I'm already down to 30 GB left and i've only had it for about a month.
At what point in filling up space, is my actual computer going to be slowing down because there isn't any memory left? or will this happnen even if there's no free space left?
Thanks.
BwebYour best bet is to start shopping around for an external HD. Maxtor, Seagate, and a few others are very popular. Some come with different backup software apps, but IMO Superduper is the easiest to use. I bought a Maxtor Touch III 300GB at Newegg.com for about $195.00 and it runs like a charm.
-
How to add dynamic roles to a document service in webcenter.
Hi Everybody,
I am using webcenter11.1.1.4.0. I integrated UCM with webcenter. Most of the documents are public and some documents are sensitive. Now one of my requirements is, I have to add public folders in webcenter. Another requirement is, For sensitive documents i have to select some people as per requirement. That means those people only can see the documents.
Can anybody suggest me to achive the above thing.
Thanks in Advance.
Regards,
SEW SupportOne additinoal qeustein - How to place the generated tab somewhere on the View? Now it's just placed at the bottom...
This qustion is answered - I just have to change the root element for cl_wd_dynamic_tool=>create_table_from_node -
How to use Axis to access a web service through Authentication proxy
Using axis access internat web service is success,but access a web service through Authentication proxy is failure.But other java classes connect through a proxy to the internet which works very well:
please help me ,thank you!!!
import org.apache.axis.client.Call;
import org.apache.axis.client.Service;
import javax.xml.namespace.QName;
//this is my access webservice faliure codes
public class TestClient
public static void main(String [] args) {
try {
System.getProperties().setProperty("http.proxySet", "true");
System.getProperties().setProperty("http.proxyHost","proxy.com");
System.getProperties().setProperty("http.proxyPort", "8080");
System.getProperties().setProperty("http.proxyUser", "username");
System.getProperties().setProperty("http.proxyPassword","password");
String endpoint =
"http://nagoya.apache.org:5049/axis/services/echo";
Service service = new Service();
Call call = (Call) service.createCall();
call.setTargetEndpointAddress( new java.net.URL(endpoint) );
call.setOperationName(new QName("http://soapinterop.org/", "echoString") );
String ret = (String) call.invoke( new Object[] { "Hello!" } );
System.out.println("Sent 'Hello!', got '" + ret + "'");
} catch (Exception e) {
System.err.println(e.toString());
}I get an "(407)Proxy authorization required" error?I am also looking for a solution. Does any one know how to do through code instead of jvm settings?
Thanks in advance! -
How to use generated code from "Import Web Services" with Cairngorm Framework
I recently downloaded Flex Builder 3 beta 2 and tried out the
wizard that lets you import web services. The code that is
auto-generated makes if fairly straight forward to consume web
services using the object types defined in the WSDL. No longer does
the developer need to decode the XML payload! The only problem I am
having is how does you integrate the auto- generated code with the
Cairngorm framework? This seems like a huge question for anyone who
might want to leverage Cairngorm and the auto-generated proxy code
in the same project (like me).
Here are the problems that I see so far.
1) How do you configure the generated service class to work
with the Cairngorm service locator? The service constructor only
accepts a “LCDS destination string” which implies that
you must use Lifecycle data services. Unfortunately, the project I
am trying to retrofit currently uses a WebService and does not use
data services. All I really need to do is change the endpoint URL
(ie from local to a development server). This issue is noted in the
bug https://bugs.adobe.com/jira/browse/FB-8456. What I think is
needed is a way to set the endpointURI in the Services.mxml file.
2) Even if I come up with a hack around #1, I do not receive
a callback to my IResponder even though I register it immediately
after the method call. I can register and listener function within
my business delegate and receive the callback, but my Command
object, which implements IResponder, does not receive the call back
even though it is registered. From what I read in the ASDocs it
should but it doesn’t for me!
These are the issues I have observed in 3 hours of messing
with this. I hope this makes sense. I would love to integrate
auto-generated web service proxies into Cairngorm but I don’t
see a straight forward way without re-architecting Cairngorm. Has
any one else run across this issue? If so, do you have any insights
on how to proceed? Any help is appreciated.Since I posted this question, I have abandoned the notion of
auto-generated web services and embraced the good old FDS concept
where the RemoteObject meta-tag does all the conversion work for
me. We are now using the Granite DS package and it is working well
for us. I would love to consume web services, but it just isn't
worth the hassle when all you have to do with Granite (and FDS) is
cast your return objects to the proper object type.
BTW, since this posting, I have investigated competing Flex
app frameworks. After my research, I checked out the PureMVC
framework. Wow!! Cairngorm always left me with an uneasy feeling
and I guess I am not alone. Apparently, Cliff Hall felt the same
way. That is why he started the project. I like his approach alot
more than Cairngorm especially since it includes notifications
which allow me to broadcast my own app level events independent
from the AS Event framework. Check out PureMVC. For what it is
worth, it has my humble endorsement. Cliff was even gracious enough
to acknowledge the other Adobe Consulting guys for their work. Good
for you Cliff, I respect that. Check out a better way at
http://www.puremvc.org/
Maybe you are looking for
-
Can someone please help me understand this
I am a new poster here and was hoping someone might be able to help me... I am writing a program that is supposed to generate a non applet (IE text) version of a 4-way intersection....however i have run into a problem that i simply cannot see a solut
-
My iMacs (2006 + late 2007) occasionally lockup during shutdown. After the desktop icons are gone but the desktop photo remains with the spinning pinwheel. Eventually I force a shutdown by holding down the power button. On restart, everything is back
-
Hi, I'm running rtgui as a frontend for rtorrent, using lighttpd as my webserver. rtgui connects to rtorrent using a socket. When rtorrent starts, it creates a file (lets say "/rpc.socket") as the user rtorrent is run by, with permissions of 755. lig
-
List-output after pressing button on Dynpro
Hello, I have a dynpro with an alv grid and a button on the top. I need to print a text after pressing the button. I tried to do that by using WRITE, but nothing was shown. Can I show a textarea on another dynpro? How would You do that? Regards, Mich
-
See description