How to use where clause

Hello,
I am using sapnwrfc for perl to get few information about SAP system. To get the Applications pruning on SAP system i need to use two tables DF14AVD and DF14T to get Application Name and Description. table DF14T contains description of the application.
I want to know using QUERY_TABLE how i can combined it and get desired result.
For ex. FCTR_ID is present in both the table. FCTR_ID which are present in DF14AVD table, i want to retrieve short description from DF14T .
Any idea how i can do this?
Amit

Hi,
You can refer to the following link.
http://help.sap.com/erp2005_ehp_04/helpdata/EN/4b/38b618068911d295300000e8353423/frameset.htm
Thank You.
Regards,
Dhanalakshmi L

Similar Messages

How to use WHERE Clause in BPEL

Hi ,
i am trying to use where clause in DB adapter but its not working.
my query is "select empname from employee where empid = &a"
can any body tell me what is the reason its npt working?
and how can i retrive data form DB?

Hi,
You are thinking perfectly fine. The solution what I suggested was
select ename from emp where empno=?
And the solution provided by you was
SELECT first_name, last_name FROM per_all_people_f WHERE person_id = #p_person_id
There is no problem with the above mentioned select statements.
I just want to say that if you see closely, internal logic changes #parameter name to ?. So both the logics are right.
Cheers,
Abhi...

How to use where clause with get statement in LDB programs

Hi All,
I am using logical databse in my report program.I am not getting how to use the where clause in the get statement is it possible to use?or if not possible only option is we should filter it after get statment is right?Can you please some body throw some idea on this?
Regards
Mahesh

Hi,
Reffer these links
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9bfa35c111d1829f0000e829fbfe/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9b5e35c111d1829f0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c6/8a15381b80436ce10000009b38f8cf/frameset.htm
/people/srivijaya.gutala/blog/2007/03/05/why-not-logical-databases
reward if helpful
Thanks,
Suma.

How to use "where" clause in modify statement

Hi
can any1 telll me is it possible to use a where clause in a modify statemetn. I want to use modify statemetn to insert a new recoed in a database table.
Regards
Sabahuddin Ahmed

MODIFY itab - itab_lines
Syntax :
... itab FROM wa TRANSPORTING comp1 comp2 ... WHERE log_exp.
With these additions the MODIFY statement assigns the content of the comp1 comp2 ... components of the wa work area specified after TRANSPORTING to all lines in the itab table that meet the logical condition log_exp. The wa work area must be compatible with the line type of the internal table.
The TRANSPORTING addition has the same effect as changing individual lines. The WHERE addition can only be specified together with the TRANSPORTING addition. After WHERE, any logical expression can be specified in which the first operand of each individual comparison is a component of the internal table. All logical expressions are therefore possible, with the exception of IS ASSIGNED, , and IS SUPPLIED. It is not possible to dynamically specify a component using bracketed character-type data objects.
While for standard tables and hashed tables all lines in the internal table are checked for the logical expression of the WHERE statement, for sorted tables, optimized access can be achieved by checking at least one opening part of the table key for parity using AND linked queries in the logical expression.
Example
Change the contents of the planetype component for all lines in the sflight_tab internal table in which this component contains the value p_plane1 to the value p_plane2.
PARAMETERS: p_carrid TYPE sflight-carrid,
            p_connid TYPE sflight-connid,
            p_plane1 TYPE sflight-planetype,
            p_plane2 TYPE sflight-planetype.
DATA sflight_tab TYPE SORTED TABLE OF sflight
                 WITH UNIQUE KEY carrid connid fldate.
DATA sflight_wa TYPE sflight.
SELECT *
       FROM sflight
       INTO TABLE sflight_tab
       WHERE carrid = p_carrid AND
             connid = p_connid.
sflight_wa-planetype = p_plane2.
MODIFY sflight_tab FROM sflight_wa
       TRANSPORTING planetype WHERE planetype = p_plane1.
reward if useful

How to Get the required List Item values by using Where Clause

I have two tables named "TAX_RULES","BILL"
1. " Tax_Rules" (Sub_Head_Code,Tax_ID,Tax_Percentage)
{ While "Sub_Head_Code" field is unique,
Tax_ID describes that there are two kinds of Tax_IDs based on Tax_percentage which is 6% for some Sub_Head_Codes and 3.5% for the remainng Sub_Head_Codes. I have given Tax_ID 1 for 6% and Tax_ID 2 for Sub_Head_codes having 3.5%. }
2. "BILL" (Bill_ID,Sub_Head_Code,Tax_ID,Bill_Amount)
{While "Bill_ID" describes unique Bill Identification Number,
Sub_Head_Code and Tax_ID are behaving like composite foreign key from Tax_Rules table}
I have design form for both tables.
In BILL form i am trying to get values of Tax_ID from Tax_Rules table at run-time by using WHEN-NEW-FORM-INSTANCE.
For this whenever i select a Sub_Head_Code in Bill Form, all the Tax_IDs that i have recorded against each Sub_Head_Code which is either 1 or 2 against 6% and 3.5% respectively.
But I want that whenever i select a "Sub_Head_Code", Only that Tax_ID which is associated with that Sub_Head_Code ahould come in the LIST ITEM.
I have used WHERE clause but that is useless.
Following is the Code that i have applied in the WHE-NEW-ITEM-INSTANCE Trigger at FORM LEVEL
<CODE>
DECLARE
     rg_n1 VARCHAR2(40) :='TAX_ID';
     rg_idn1 RecordGroup;
     gc_idn1 GroupColumn;
     errcode NUMBER;
BEGIN
     CLEAR_LIST('BILL.TAX_ID');
     rg_idn1 := Find_Group(rg_n1);
IF      Id_Null(rg_idn1) then
          rg_idn1 := Create_Group(rg_n1);
     gc_idn1 := Add_Group_Column(rg_idn1,'EXPLAIN',CHAR_COLUMN,60);
          gc_idn1 := Add_Group_Column(rg_idn1,'TAX_ID',CHAR_COLUMN,3);
     END IF;
     errcode := Populate_Group_With_Query(rg_idn1,'select TAX_ID,TAX_ID from TAX_RULES');
     POPULATE_LIST('BILL.TAX_ID',RG_IDn1);
END;
</CODE>

In the Tax Rules table, you state:
"Sub_Head_Code" field is unique
In the Bill table, you state:
Sub_Head_Code and Tax_ID are behaving like composite foreign key from Tax_Rules table
If the Sub_Head_Code is unique, then it's acting as a primary key, so Sub_Head_Code and Tax_ID in the Bill table are not behaving like a composite foreign key. The Sub_Head_Code is a foreign key, and the Tax_ID is irrelevant as far as keys are concerned.
It is not clear what it is you want to do.
If you want to display the Tax_IDs from the Bill table when you select a Sub_Head_Code from the Tax_Rules table, then change your query to:
select TAX_ID, TAX_ID from BILL where Sub_Head_Code = :Tax_Rules.Sub_Head_Code
If you want to display the Tax_IDs from the Tax_Rules table when you select a Sub_Head_Code from the Bill table, then change your query to:
select TAX_ID, TAX_ID from TAX_RULES where Sub_Head_Code = :Bill.Sub_Head_Code
If this is not what you want, then clarify what it is you want to do. Don't say:
"I want that whenever i select a "Sub_Head_Code", Only that Tax_ID which is associated with that Sub_Head_Code"
because it is not clear what tables you are referring to.

Can any one tell me how to use EXISTS clause inplace of IN operator.

Hi All,
Can any one tell me how to use EXISTS clause AND (JC.EMPL_ID, JC.EMPL_RCD) inplace of IN operator.
SELECT COUNT (1)
FROM SYSADM.OHR_PERS_CURR PC
, SYSADM.OHR_JOB_CURR JC
WHERE PC.EMPL_ID = JC.EMPL_ID
AND (JC.EMPL_ID, JC.EMPL_RCD) in (
SELECT HS.EMPL_ID, HS.EMPL_RCD
FROM SYSADM.HU_SCRTY_JOB HS, ODSHR.OHR_SCRTY_USER_CFG OS
WHERE HS.HU_SCRTY_CFG_ID = OS.HU_SCRTY_CFG_ID
AND OS.DB_LOGIN = USER)
Thank you.

SELECT COUNT (1)
FROM SYSADM.OHR_PERS_CURR PC
, SYSADM.OHR_JOB_CURR JC
WHERE PC.EMPL_ID = JC.EMPL_ID
AND EXISTS (
SELECT null
FROM SYSADM.HU_SCRTY_JOB HS, ODSHR.OHR_SCRTY_USER_CFG OS
WHERE HS.HU_SCRTY_CFG_ID = OS.HU_SCRTY_CFG_ID
AND OS.DB_LOGIN = USER
AND HS.EMPL_ID = JS.EMPL_ID AND HS.EMPL_RCD = JC.EMPL_RCD)
But why ?
Rgds.

Query using where clause

I am not able to run a SQL query using where clause.
the query is as follows:
I extract the text input by the user in a text field say 'a' and
store it in string 'y'.
String y= a.getText();
//running the query
Select A from B where B.x=y;
how do we run a where clause when y is a string variable instead of value?

Use the following :
String y = a.getText();
String query ="select A.CODE from Port A where A.NAME=" + "'" + y + "'" ;
ResultSet rs= stmt.executeQuery(query);

How to set Where clause in the View Object of the MessageChoice ?

Hi,
How to set Where clause in the View Object of the
MessageChoice ?
Example:
<bc4j:rootAppModuleDef name="EdEscolaCampusView1AppModule"
definition="ed00050.Ed00050Module"
releaseMode="stateful" >
<bc4j:viewObjectDef name="EdEscolaCampusView1" >
<bc4j:rowDef name="CreateEdEscolaCampusView1" autoCreate="true" >
<bc4j:propertyKey name="key" />
</bc4j:rowDef>
</bc4j:viewObjectDef>
<bc4j:viewObjectDef name="ListaTipLocalView1"
rangeSize="9999">
</bc4j:viewObjectDef>
</bc4j:rootAppModuleDef>
</bc4j:registryDef>
messageChoice declaration:
<bc4j:messageChoice name="SeqTipoLocalCampus"
attrName="SeqTipoLocalCampus"
prompt="Local do Campus">
<contents>
<bc4j:optionList attrName="SeqTipoBasico"
textAttrName="NomTipoBasico"
voName="ListaTipLocalView1"/>
</contents>
</bc4j:messageChoice>
I would like set where clause of ViewObject, with dinamic parameters (using attribute1 = :1), before populate messageChoice.
thanks...
Danilo

Hi Andy,
I try set a where clause using the message:
Set where Clause parameter using UIX , but my UIX Page have 2 messageChoice's of different ViewObject's, then I need implement this Java Class:
//Nome da Package da Tela Detail
package br.com.siadem.siaed.ed00050;
// Importa as Bibliotecas necessárias
import oracle.jbo.ViewObject;
import oracle.jbo.ApplicationModule;
import oracle.jbo.client.Configuration;
import oracle.cabo.servlet.BajaContext;
import oracle.cabo.servlet.Page;
import oracle.cabo.servlet.event.PageEvent;
import oracle.cabo.servlet.event.EventResult;
import oracle.cabo.data.jbo.servlet.bind.*;
import oracle.cabo.ui.data.BoundValue;
import oracle.cabo.ui.data.DataBoundValue;
import javax.servlet.http.HttpServletRequest;
import br.com.siadem.siaed.util.*;
import javax.servlet.http.Cookie;
import oracle.cabo.data.jbo.def.NestedAppModuleDef;
import oracle.cabo.data.jbo.def.ViewObjectDef;
import oracle.cabo.data.jbo.def.AppModuleDef;
// Classe que configura os parametros para a execução da Query,
// utilizando variáveis de Sessao
public class FunPreQueryLista
public static EventResult FunConfiguraQuery(BajaContext context, Page page, PageEvent event) throws Throwable
// TrataDadosSessao - Classe utilizada para retornar os valores das variáveis de sessão genéricas
// Ex: CodCliente, CodMunicipio etc...
TrataDadosSessao varDadosSessao = new TrataDadosSessao();
// 1o. Parametro Configurado - Através da classe TrataDadosSessao, utilizando um método Get
// <alterar>
String valor1 = varDadosSessao.getCodCliente();
String valor2 = varDadosSessao.getCodMunicipio();
//Cria o objeto que retorna o ApplicationModule
ApplicationModule am = ServletBindingUtils.getApplicationModule(context);
// Início das Configurações da Query da Lista
//Cria o objeto que retorna o view object da lista desejada
//alterar
ViewObject TipoLocal = am.findViewObject("ListaTipoLocalView1");
//Configuração dos parametros definidos na query do view Object
//alterar
TipoLocal.setWhereClauseParam(0,valor1);
TipoLocal.setWhereClauseParam(1,valor2);
// Executa a Query
TipoLocal.executeQuery();
// Fim das Configurações da Query da Lista
// Início das Configurações da Query da Lista
//Cria o objeto que retorna o view object da lista desejada
//alterar
ViewObject TipoDestLixo = am.findViewObject("ListaDestinoLixoView1");
//Configuração dos parametros definidos na query do view Object
//alterar
TipoDestLixo.setWhereClauseParam(0,valor1);
TipoDestLixo.setWhereClauseParam(1,valor2);
// Executa a Query
TipoDestLixo.executeQuery();
// Fim das Configurações da Query da Lista
// Retorna o Resultado para a Página
return new EventResult(page);
The code works very well...
And, I'm sorry for my two repost's in UIX Forum about this in a few time.
Thank very much...
Danilo

Can we use where clause in Update on Merge statement?

Hi All,
I tried to execute the following Merge Query:
When this query is executed without ‘Where clause’ in Update statement its working fine. When executed with ‘Where clause’ it throwing the following error:
ORA-00905: missing keyword.
Following is the sample query which I tried to execute:
MERGE INTO TABLE_NAME
USING (SELECT COLUMN FORM TABLES)
ON (CONDITION)
WHEN MATCHED THEN
UPDATE SET
     COLUMN UPATES
WHERE CONDITION -- Can we use where clause here?
WHEN NOT MATCHED THEN
INSERT
INSERT VALUES;
Can some one help on this?
Thanks in advance.
Darius

Yes:
SQL> drop table emp1;
Table dropped.
SQL> create table emp1 as select * from emp where deptno = 30;
Table created.
SQL> update emp1 set sal = sal*2;
6 rows updated.
SQL> commit;
Commit complete.
SQL> select ename,sal from emp1;
ENAME             SAL
ALLEN            3200
WARD             2500
MARTIN           2500
BLAKE            5700
TURNER           3000
JAMES            1900
6 rows selected.
SQL> MERGE INTO emp1
2 USING(select * from emp) emp
3 ON (emp1.empno = emp.empno)
4 WHEN MATCHED THEN
5 UPDATE SET sal = emp.sal WHERE ename = 'TURNER'
6 WHEN NOT MATCHED THEN
7 INSERT(ename,sal) VALUES(emp.ename,emp.sal);
9 rows merged.
SQL> select ename,sal from emp1;
ENAME             SAL
ALLEN            3200
WARD             2500
MARTIN           2500
BLAKE            5700
TURNER 1500
JAMES            1900
SMITH             800
JONES            2975
CLARK            2450
SCOTT            3000
KING             5000
ENAME             SAL
ADAMS            1100
FORD             3000
MILLER           1300
14 rows selected.
SQL> SY.

Performance hit using "where" clause in the query

Hi All,
I am facing a huge performance hit in the java code when using "where" clause in queries. Following are the details:
1. SELECT * FROM Employee
2. SELECT * FROM Employee where employeeid in (26,200,330,571,618,945)
There is no difference in Query Execution Time for both queries.
Business Logic Time is huge in second case as compared to first one (ratio - 1:20).
Rows returned are more in first case as compared to second case.(ratio - 1:4)
Business Logic is same for both the cases where I iterate through the ResultSet, get the objects and set them in a data structure.
Does anybody know the reason of unexpected time difference for the business logic in the second case?

Since you're mentioning clustering your index, I'll assume you are using Oracle. Knowing what database you are using makes it a lot easier to suggest things.
Since you are using Oracle, you can get the database to tell you what execution plan it is using for each of the 2 SQL statements, and figure out why they have similar times (if they do).
First, you need to be able to run SQL*Plus; that comes as part of a standard database installation and as part of the Oracle client installation - getting it set up and running is outside the scope of this forum.
Second, you may need your DBA to enable autotracing, if it's not already:
http://asktom.oracle.com/~tkyte/article1/autotrace.html
http://www.samoratech.com/tips/swenableautotrace.htm
Once it's all set up, you can log in to your database using sql*plus, issue "SET AUTOTRACE ON", issue queries and get execution plan information back.
For example:
SQL> set autotrace on
SQL> select count(*) from it.ticket where ticket_number between 10 and 20;
COUNT(*)
        11
Execution Plan
Plan hash value: 2983758974
| Id | Operation         | Name       | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT |            |     1 |     4 |     1   (0)| 00:00:01 |
|   1 | SORT AGGREGATE   |            |     1 |     4 |            |          |
|* 2 |   INDEX RANGE SCAN| TICKET_N10 |    12 |    48 |     1   (0)| 00:00:01 |
Predicate Information (identified by operation id):
   2 - access("TICKET_NUMBER">=10 AND "TICKET_NUMBER"<=20)
Statistics
          0 recursive calls
          0 db block gets
          1 consistent gets
          0 physical reads
          0 redo size
        515 bytes sent via SQL*Net to client
        469 bytes received via SQL*Net from client
          2 SQL*Net roundtrips to/from client
          0 sorts (memory)
          0 sorts (disk)
          1 rows processed
SQL> This tells me that this query used an INDEX RANGE SCAN on index TICKET_N1; the query can't do much better than that logically... In fact, the statistic "1 consistent gets" tells me that Oracle had to examine only one data block to get the answer, also can't do better than that. the statistic, "0 physical reads" tells me that the 1 data block used was already cached in Oracle's memory.
the above is from Oracle 10g; autotrace is available back to at least 8i, but they've been adding information to the output with each release.
If you have questions about sql_plus, check the forums at asktom.oracle.com or http://forums.oracle.com/forums/category.jspa?categoryID=18
since sql*plus is not a JDBC thing...
Oh, and sql*plus can also give you easier access to timing information, with "set timing on".

How to use From clause as a block datasources

Hi,
I want to know how to use from clause as a block datasource.
Could anyone give me an example to do that? I couldn't find it
in the help file.
I sincerely ask someone help me.
Many thanks
Diana

Diana,
I presume you are getting a "FRM-40505: error unable to perform
query" when you try to execute query. I suggest you select the
"Display Error" item from the "Help" menu to see the query that
Oracle is generating. If the query that Oracle generates as a
result of your "Query data source name" is not formed correctly,
you will get the FRM-40505 error.
Copy and paste the query that is displayed into SQLPLUS and test
to see what happens when you try to execute the query from
SQLPLUS. That will give you a better idea of what the cause of
the problem is.
From your example, a query that works should look like "select
c_no from (select c_no from books)".
Keep in mind that for blocks based on FROM clause, the query that
produces the data is of the form :
SELECT <all columns in the block>
FROM <select statement entered in the "Query Data Source Name"
blockproperty>
The data source for the block is the select statement embedded in
the from clause.
Hope this helps.

OA Framework LOV – How to add where clause dynamically at runtime

Hi All,
Following is my page design:
MainAM (This is root Application module) Package is: mycompany.oracle.apps.<product>.<project>.server
MainPageVO (This is the View Object associated to Main AM)
LovAM (This Application module is for LOVs) Package is: mycompany.oracle.apps.<product>.<project>.lov.server
FileNameLovVO (This is the View Object is for "File Name" LOV. It is associated LovAM)
I my main page is attached to the "Main AM". In the main page, I have a custom search region and in that there is a messageLovInput type of field based on "FileNameLovVO". The field name is File Name.
Use Case:
When a user opens the page, I determine user type. If the use is a clerk (not a superuser) then I need to restrict values in my File Name LOV by setting where clause dynamically.
Issue1:
====
In the main page controller when I do following, OA Framework is not able to access the "FileNameLovVo".
1. Following code is from the main page's controller:
String userId = 100;
LovAMImpl lovAm = new LovAMImpl();
Serializable[] lovParameters = {userId};
Class[] lovParamTypes = { String.class };
lovAm.invokeMethod("initLovQuery", lovParameters, lovParamTypes);
2. In LovAMImpl class I have created following method:
public void initLovQuery(String useId)
FileNameLovVOImpl fileNameLovVo = getFileNameLovVO1(); // ******This returns NULL*******
if (fileNameLovVo == null)
MessageToken[] errTokens = { new MessageToken("OBJECT_NAME", "getFileNameLovVO1")};
throw new OAException("AK", "FWK_TBX_OBJECT_NOT_FOUND", errTokens);
fileNameLovVo.initQuery(userId);
In the above code "FileNameLovVOImpl fileNameLovVo = getFileNameLovVO1();" is returning NULL.
Please let me know what am I missing here.
I resolved above issue with following work around:
1. Attached "FileNameLovVO" to "MainAM"
2. Moved initLovQuery(String useId) method to "MainAMImpl" class.
Is that the correct way? I would prefer NOT to attach "FileNameLovVO" to "MainAM". Any suggestions?
Issue2:
====
After using above work around I tried to set WHERE clause dynamically:
FileNameLovVO is based on following SQL query:
SELECT DISTINCT file_name FROM <table> WHERE USER_ID like :1
I need to pass value for USER_ID if the user is a clerk and I need to pass '%' if the user is a supper user. I'm passing value in "LovVo.initQuery(userId)" method using following code:
public void initQuery(String userId)
StringBuffer whereClause = new StringBuffer(1000);
Vector parameters = new Vector(1);
int bindCount = 0;
setWhereClauseParams(null);
if ((userId != null) && (!("".equals(userId.trim()))))
parameters.addElement(servicerId);
whereClause.append(++bindCount);
if (bindCount > 0)
Object[] params = new Object[bindCount];
parameters.copyInto(params);
setWhereClauseParams(params);
executeQuery();
When I select LOV at runtime in the page, it fails with following error:
oracle.apps.fnd.framework.OAException: oracle.jbo.SQLStmtException: JBO-27122: SQL error during statement preparation. Statement: SELECT * FROM (SELECT DISTINCT file_name FROM <table> WHERE user_id LIKE :1) QRSLT WHERE (( UPPER(FILE_NAME) like :1 AND (FILE_NAME like :2 OR FILE_NAME like :3 OR FILE_NAME like :4 OR FILE_NAME like :5))) ORDER BY file_name desc
OA Framework tries to create following statement:
SELECT *
FROM (SELECT DISTINCT file_name
FROM <table>
WHERE user_id LIKE :1) qrslt
WHERE (( UPPER (file_name) LIKE :1
AND ( file_name LIKE :2
OR file_name LIKE :3
OR file_name LIKE :4
OR file_name LIKE :5
ORDER BY file_name DESC
Any help is greatly appreciated.
Thanks for your help guys.
Mitesh

I have a lovinput item which has an external LOV attached to it - the VO uses the below sql query. I want to display the addresses of the customer accounts belonging to the customer name or account entered. I have a PPR event in the account number field which is calling the onAccountNumber method in my AM - the method is getting triggered when you enter the account number and the vo returns the rowcount as 3 exactly but if you click the lovinput item - it brings back all the addresses available instead bringing back addresses beloning to the account number.
public void OnAccountNumber(String accountNumber,String partyName,
Boolean executeQuery)
System.out.println("Im here on account number" + accountNumber + " PartyName:" + partyName);
AddressVOImpl Addrvo= getAddressVO1();
Vector parameters = new Vector(2);
StringBuffer whereClause = new StringBuffer(100);
int clauseCount = 0;
int bindCount = 0;
Addrvo.setWhereClauseParams(null); // Always reset
if ((accountNumber != null) && (!("".equals(accountNumber.trim()))))
whereClause.append(" Account_Number = :");
whereClause.append(++bindCount);
parameters.addElement(accountNumber);
clauseCount++;
if ((partyName != null) && (!("".equals(partyName.trim()))))
if (clauseCount >0){
whereClause.append(" AND ");
whereClause.append(" Party_Name like :");
whereClause.append(++bindCount);
parameters.addElement(partyName);
clauseCount++;
Addrvo.setWhereClause(whereClause.toString());
if (bindCount >0)
Object[] params=new Object[bindCount];
parameters.copyInto(params);
Addrvo.setWhereClauseParams(params);
System.out.println("AddressVO:" + Addrvo.getQuery() );
//Addrvo.executeQuery();
System.out.println("Addr Cnt:" + Addrvo.getRowCount());
SQL used in VO
=========
SELECT hl.address1
|| ' '
|| hl.address2
|| ' '
|| hl.address3
|| ' '
|| hl.city
|| ' '
|| hl.postal_code
|| ' '
|| hl.state
|| ' '
|| hl.country address,
hca.account_number,hp.party_name
FROM hz_cust_accounts hca,
hz_cust_site_uses_all hcsu,
hz_cust_acct_sites_all hcs,
hz_party_sites hps,
hz_locations hl,
hz_parties hp
WHERE hcsu.cust_acct_site_id = hcs.cust_acct_site_id
AND hcs.party_site_id = hps.party_site_id
AND hps.location_id = hl.location_id
AND hca.cust_account_id = hcs.cust_account_id
AND hcsu.site_use_code = 'SHIP_TO'
AND hcsu.status = 'A'
AND hp.party_id = hps.party_id
AND hp.party_id = hca.party_id
-- AND account_number=6028
Can someone please tell me how to restrict the addresses lov to an entered account number or customer name??

Does derived table use where clause fillters inside

dear all.
Table "A" has two cols aid and col1 , aid is pk.
Table "B" has two cols bid , aid , and colb .
followin query can be formulated in other ways ,but i wanted to ask something about query processing.
select aid,aa.ca,aa.cb
from A
left join
(select aid, b.colb ca ,b1.colb cb
from A
left join B on a.aid=b.aid and b.colb='r'
left join B b1 on a.aid=b1.aid and b1.colb='e'
) aa
where a.aid (1,2)
i wanted to know if i put the where clause "where a.aid(1,2) in side derived table aa
then will it change its plan in any case or it is sufficant to put where clasue in last
or i should put the where clause in side the derive table "aa" also.
yours sincerley

Please post DDL, so that people do not have to guess what the keys, constraints, Declarative Referential Integrity, data types, etc. in your schema are. Learn how to follow ISO-11179 data element naming conventions and formatting rules. Temporal data should
use ISO-8601 formats. Code should be in Standard SQL as much as possible and not local dialect.
This is minimal polite behavior ON SQL forums. Is your boss this rude to you??
CREATE TABLE Alphas
(alpha_id INTEGER NOT NULL PRIMARY KEY,
col1 INTEGER NOT NULL);
Thanks to your rude, poor narrative I have to guess about the second table:
CREATE TABLE Betas
(beta_id INTEGER NOT NULL PRIMARY KEY,
alpha_id INTEGER NOT NULL
REFERENCES Alphas(alpha_id),
colb CHAR(1) NOT NULL);
Your query is awful. OUTER JOINs are rare in a properly designed schemA. The DRI should guarantee inner joins! We seldom need to re-name columns.
>> I wanted to know if I put the where clause WHERE A.alpha_id(1,2) in side derived table aa <<
That is not a syntactically invalid search condition; did you mean
“WHERE A.alpha_id IN (1,2)” ??
Why did you de-normalize your results? My guess is that you can get the same data with this:
SELECT alpha_id, colb
FROM Betas AS B
WHERE colb IN ('r', 'e')
AND alpha_id IN (1, 2);
--CELKO-- Books in Celko Series for Morgan-Kaufmann Publishing: Analytics and OLAP in SQL / Data and Databases: Concepts in Practice Data / Measurements and Standards in SQL SQL for Smarties / SQL Programming Style / SQL Puzzles and Answers / Thinking
in Sets / Trees and Hierarchies in SQL

Using where clause with like

Hi all,
im trying to set a block default where clause in the pre-query trigger of my block "customer_settlement" , to query the records that exist in a customers table like this, where the customer_name is variable based on the value entered by the user in enter-query mode before hitting the F8 key , the statement is :
set_block_property( 'customer_settlement' , default_where ,
' fk_cust_code in ( select customer_code from customers where customer_name like %' || :customer_settlement.customer_name ||'% )' );
the query doesnt work and giving me an error " unable to perform query" , notice that :customer_settlement.customer_name is an item in the block , the user change it and would like to query upon it , and its not a base table item on customer_settlement block its on customers table only . I tried all combinations of '%' and || but it seems that oracle can't see the value In the customer_name field.
any help is highly thanked.
im using Oracle form 9.0.4 and Oracle 10g Db.
Regards,
IKQ

Hi,
does this work ?
set_block_property( 'customer_settlement' , default_where ,
' fk_cust_code in ( select customer_code from customers where customer_name like '''%' || :customer_settlement.customer_name ||'%''' )' );
Frank

How to canel where clause equal effect

hi all
in JPAQL
i wanna cancel the where clause effect in order to use the following example query
select u from user u where u.name= :name
the question is what to put for the value of the parameter:name to make the query get all the objects ,ie. make it match against any name,i know that this can be achieved with omiting the where clause alltogether but my real world query is much complex and i cannot guarentee that each time i run the query all the parameters will be assigned so i want to neutralize the effect of effect of the unassigned parameters by making a default that get all objects, i cannot use dynamically generated sql or jpaql as my db perform much much better with precompiled queries
please help me and tell me if ur solution is portable among JPA providers(in the spec )or just available in KODO
thanx alot

hi all
in JPAQL
i wanna cancel the where clause effect in order to use the following example query
select u from user u where u.name= :name
the question is what to put for the value of the parameter:name to make the query get all the objects ,ie. make it match against any name,i know that this can be achieved with omiting the where clause alltogether but my real world query is much complex and i cannot guarentee that each time i run the query all the parameters will be assigned so i want to neutralize the effect of effect of the unassigned parameters by making a default that get all objects, i cannot use dynamically generated sql or jpaql as my db perform much much better with precompiled queries
please help me and tell me if ur solution is portable among JPA providers(in the spec )or just available in KODO
thanx alot

How to use where clause

Similar Messages

Maybe you are looking for