How to use wild card with variable in powershell

HI
i am trying to use wild card with variable but getting an error message, "You cannot call a method on a null-valued expression."
$src = 'C:\Temp'
$TabletzipPath = $src + "tab*.zip"
i would like to copy the tablet zip file which is placed in in $src to be copied in $TabletzipPath.
i am using tab* because this file name changes continuously. so if i give a fix name for example tablet1.zip than it works fine.

Not sure if the wildcard will work without seeing how you're using the variable.
That said, I can say that it looks like you're missing the backslash between the $src path and the wildcard filename. As-is the above code assigns a value to $TabletzipPath of "C:\temptab*.zip" instead of what you are likely expecting ("C:\temp\tab*.zip")
Jason Warren
@jaspnwarren
jasonwarren.ca
habaneroconsulting.com/Insights

Similar Messages

Using wild card with Captivate 5 ( fill in the blank)

I am training software package that requires many fill in the blanks besides the login screeen. If I were to recording the actions using Captivate 5 record, I think, I can only use a demonstration recording as oppsed to having my students interact with the product by filling in the blank. For example, my product asks for a login. When I login to demonstrate how it should be done, the product reponds correctly. By my student is limited to watching as opposed to interacting. While login is not such a big deal, there are several other areas where the same concept applies. Ideally, I wish to use wild cards in fill in the blank so that any name or information can be used to interact with Captivate and move the slide along. Is this possible, and if so, how?

I think Lilybiri may be misinterpreting your use of the term "wildcards" to mean using them in the programming sense.
Perhaps you are referring to the characters that appear in a typical Password field to hide what the user is actually typing?
If so, the text field object in Captivate has an option to use these password characters so that the user's typing characters are hidden. The characters used are asterisks, which are what some people refer to as wildcard characters.

How to use wild card character in input field

Hi
I'm creating model in which the Purchase Order information need to be entered in Input Field.
My requirement is search using wild char char as '*'
Let say in input field i gave PO order as 20* then it'll search for all the PO's which starts from 20.
Could you please share some documents/guidelines, for this issue
Thanks and Regards
Puneet

Hi,
You can use the wild card char in the input box.please try below steps.
1.Check whether the input string has ' * ' char using "CONTAINS(text,pattern)" operation.
2.If yes, Replace the ' * ' with space by "REPLACE(text,pattern,repstr)" operation.->consider this result as input2
3.Now , Have a Filter from ur webservice(which gives your Purchase Order information )
and filter it by the condition " BEGINS(WSField,input2)"
the Final expression in the filter will be "_=IF(CONTAINS(input,""),BEGINS(HelpWSField,REPLACE(input,"\","")),true)_"
Hope it helps.
Regards,
Priya
Edited by: priya on May 20, 2009 12:49 PM

How to use 9264 card with daq

Hi friends,
I m using labview 8.6 version. I hve interfaced labview with cdaq 9172.
I have used 9201, 9203 ,9219 card.Now i want to use 9264 card i.e analog output card.I am not getting how to use it .wheather I hve 2 use on function plate express--> input-->daq assistant or something else.please help me. i want to control valve through 9264.i am sending some screen shot how i m trying 2 use.
Attachments:
1.jpg ‏4373 KB
2.JPG ‏103 KB
4.JPG ‏168 KB

Hi Ajju
You can use the DAQ Assistant express VI, but since the 9264 is an output module you will need to choose "Generate Signal" instead of "Acquire Signal" in the dialog. Then you will specify what you want to output, from which channels, how fast etc. in the same maner as you do when acquiring a signal.
Hope that clears up teh confusion
Best Regards
David
NISW

How to use in clause with variable elements with a prepared statement?

Is there any way to use a prepared statement for a query which incorporates an in clause with unknown number of elements in the list?
null

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Iraj ():
Is there any way to use a prepared statement for a query which incorporates an in clause with unknown number of elements in the list?<HR></BLOCKQUOTE>
Sorry, can't be done. The PreparedStatement is precomplied, so you can't have variable number of params or unknown number of elements in a list.

Open file using wild cards

does anyone know how to open a file using wild cards in the name.
For example, a certain folder will contain a number of files, with the name constructed as follows:
CALDB_ then a 6 digit serial number, and then 14 characters which could be ANYTHING. so it might look like this
CALDB_123456_33KA1234567890.txt
or
CALDB_123457_33KA1234567890.txt
The key part of the file name is the 6 digit serial number which is unique, and the CALDB_ which is always the same.
I would like to use a file open command with the file name something like CALDB_123456_*.txt, but it doesn't appear to work.
Can anyone help?
Thanks
Solved!
Go to Solution.

Hi Dylan,
I have been searching along our forum, and found a similar question for using wildcards in selecting files. An active user (unclebump) replied on this request with a VI, with which you can select a folder on your computer which is scanned for certain files. I've adjusted this VI for selecting the CALDB_* files. Enclosed you will find this file (zipped) including my test folder.
Maybe this will be helpfull for your application.
Best regards,
Peter Schutte
Message Edited by Peter S on 10-14-2008 03:22 AM
Attachments:
File selecting.zip ‏12 KB

Wild Carding with Record Search - Auto Suggest Behavior

I have a property by name searchTerm which is enabled for wild card record search. When I am doing a wild card search passing bbay* to ERecSearch , it is not auto correcting to baby and returning no results, whereas when I send bbay to Endeca, it is automatically auto correcting to baby.
Please let me know why is this different behavior noted. Do we not expect them to auto correct even when we use wild carding. Please throw some light on this and how can this be achieved

As Pradeep said, auto-correction is one of the linguistic features that isn't supported for wildcard searching (along with stemming, thesaurus, snippeting and phrasing). One approach is to do a "cascading search", so execute a search without wildcarding first (and getting spell-correction, did-you-mean, stemming etc.), and if you don't get any matches then re-submit as a wildcarded search. This is also useful as part of a larger part number matching strategy.
Michael

How to run execute immdiate with variables

Hi friends,
How to run execute immdiate with variables in v_stmt below?
I dont know how to declare the value of i here.
Set serveroutput on;
DECLARE
   i        VARCHAR (20);
   v_stmt   VARCHAR2 (100);
   CURSOR c
   IS
      SELECT sqlid FROM temp1;
BEGIN
   OPEN c;
   LOOP
      FETCH c INTO i;
      EXIT WHEN c%NOTFOUND;
      DBMS_OUTPUT.put_line (i);
      v_stmt := 'select * from table(dbms_xplan.display_cursor('&i',null))'
      execute immediate v_stmt;
   END LOOP;
   CLOSE c;
END;
/Regds,
Kunwar.

You first need to use a bind variable (named ':v' in SQL statement in my example):
set serveroutput on;
DECLARE
   i        VARCHAR (20);
   v_stmt   VARCHAR2 (100);
   CURSOR c
   IS
       -- modified for a quick test
      SELECT sql_id FROM v$sql where child_number > 2;
BEGIN
   OPEN c;
   LOOP
      FETCH c INTO i;
      EXIT WHEN c%NOTFOUND;
      DBMS_OUTPUT.put_line (i);
      v_stmt := 'select * from table(dbms_xplan.display_cursor(:v,null))';
      execute immediate v_stmt using i;
   END LOOP;
   CLOSE c;
END;
/However because your SELECT statement returns several rows you need to adapt your code to process all rows returned (as already suggested in first reply to your message).
Instead of using PL/SQL, I recommend to generate a SQL file using only SQL and then to run the generated SQL file.
For example:
spool edx.sql
set serveroutput on
declare
v_stmt varchar2(100);
v_q char(1):='''';
begin
dbms_output.put_line('spool edx.log');
for s in (select sql_id from v$sql where child_number >2)
loop
dbms_output.put_line('select * from table(dbms_xplan.display_cursor(' || v_q || s.sql_id || v_q || ',null));');
end loop;
dbms_output.put_line('exit');
end;
spool ofThis generates a SQL file similar to :
spool edx.log
select * from table(dbms_xplan.display_cursor('5rygsj4dbw6jt',null));
select * from table(dbms_xplan.display_cursor('5rygsj4dbw6jt',null));
select * from table(dbms_xplan.display_cursor('5rygsj4dbw6jt',null));
select * from table(dbms_xplan.display_cursor('fsbqktj5vw6n9',null));
select * from table(dbms_xplan.display_cursor('6q42j0018w7t8',null));
select * from table(dbms_xplan.display_cursor('a5mmhrrnpwjsc',null));
select * from table(dbms_xplan.display_cursor('3c1kubcdjnppq',null));
select * from table(dbms_xplan.display_cursor('3c1kubcdjnppq',null));
select * from table(dbms_xplan.display_cursor('9gkq7rruycsjp',null));
select * from table(dbms_xplan.display_cursor('f0wj261bm8snd',null));
select * from table(dbms_xplan.display_cursor('ab3swhv5g138y',null));
select * from table(dbms_xplan.display_cursor('6vgvyh4xw9c5g',null));
select * from table(dbms_xplan.display_cursor('ak5crjygnpk60',null));
select * from table(dbms_xplan.display_cursor('9p6bq1v54k13j',null));
select * from table(dbms_xplan.display_cursor('19x1189chq3xd',null));
select * from table(dbms_xplan.display_cursor('7sx5p1ug5ag12',null));
select * from table(dbms_xplan.display_cursor('730vdzhng6m6g',null));
select * from table(dbms_xplan.display_cursor('730vdzhng6m6g',null));
select * from table(dbms_xplan.display_cursor('0v3dvmc22qnam',null));
select * from table(dbms_xplan.display_cursor('0v3dvmc22qnam',null));
select * from table(dbms_xplan.display_cursor('a1zv6wju3ftgv',null));
select * from table(dbms_xplan.display_cursor('7ng34ruy5awxq',null));
select * from table(dbms_xplan.display_cursor('7ng34ruy5awxq',null));
select * from table(dbms_xplan.display_cursor('b2gnxm5z6r51n',null));
select * from table(dbms_xplan.display_cursor('b2gnxm5z6r51n',null));
select * from table(dbms_xplan.display_cursor('g4gp07gt2z920',null));
select * from table(dbms_xplan.display_cursor('1gu8t96d0bdmu',null));
select * from table(dbms_xplan.display_cursor('g00cj285jmgsw',null));
select * from table(dbms_xplan.display_cursor('g00cj285jmgsw',null));
select * from table(dbms_xplan.display_cursor('g00cj285jmgsw',null));
select * from table(dbms_xplan.display_cursor('bn4b3vjw2mj3u',null));
select * from table(dbms_xplan.display_cursor('38243c4tqrkxm',null));
select * from table(dbms_xplan.display_cursor('2abjfnvy5rkyg',null));
select * from table(dbms_xplan.display_cursor('350f5yrnnmshs',null));
select * from table(dbms_xplan.display_cursor('350f5yrnnmshs',null));
select * from table(dbms_xplan.display_cursor('3s1yukp05bzg6',null));
select * from table(dbms_xplan.display_cursor('3s1yukp05bzg6',null));
select * from table(dbms_xplan.display_cursor('1tgukkrqj3zhw',null));
exit
PL/SQL procedure successfully completed.Edited by: P. Forstmann on 20 mars 2013 19:06
Edited by: P. Forstmann on 20 mars 2013 19:33

How to use Oracle partitioning with JPA @OneToOne reference?

Hi!
A little bit late in the project we have realized that we need to use Oracle partitioning both for performance and admin of the data. (Partitioning by range (month) and after a year we will move the oldest month of data to an archive db)
We have an object model with an main/root entity "Trans" with @OneToMany and @OneToOne relationships.
How do we use Oracle partitioning on the @OneToOne relationships?
(We'd rather not change the model as we already have millions of rows in the db.)
On the main entity "Trans" we use: partition by range (month) on a date column.
And on all @OneToMany we use: partition by reference (as they have a primary-foreign key relationship).
But for the @OneToOne key for the referenced object, the key is placed in the main/source object as the example below:
@Entity
public class Employee {
@Id
@Column(name="EMP_ID")
private long id;
@OneToOne(fetch=FetchType.LAZY)
@JoinColumn(name="ADDRESS_ID")
private Address address;
EMPLOYEE (table)
EMP_ID FIRSTNAME LASTNAME SALARY ADDRESS_ID
1 Bob Way 50000 6
2 Sarah Smith 60000 7
ADDRESS (table)
ADDRESS_ID STREET CITY PROVINCE COUNTRY P_CODE
6 17 Bank St Ottawa ON Canada K2H7Z5
7 22 Main St Toronto ON Canada L5H2D5
From the Oracle documentation: "Reference partitioning allows the partitioning of two tables related to one another by referential constraints. The partitioning key is resolved through an existing parent-child relationship, enforced by enabled and active primary key and foreign key constraints."
How can we use "partition by reference" on @OneToOne relationsships or are there other solutions?
Thanks for any advice.
/Mats

Crospost! How to use Oracle partitioning with JPA @OneToOne reference?

How to use my itunes with a new pc

how to use my itunes with a new pc?

These are two possible approaches that will normally work to move an existing library to a new computer.
Method 1
Backup the library with this User Tip.
Deauthorize the old computer if you no longer want to access protected content on it.
Restore the backup to your new computer using the same tool used to back it up.
Keep your backup up-to-date in future.
Method 2
Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
Both methods should give the new computer a working clone of the library that was on the old one. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase and reload.
I'd recommend method 1 since it establishes an ongoing backup for your library.
If you have an iOS device that syncs with contact & calendar data on your computer you should migrate this information too. If that isn't possible create a dummy entry of each type in your new profile and iTunes should offer to merge the existing data from the device into the computer, otherwise the danger is that it will wipe the information from the device.
If your media folder has been split out from the main iTunes folder you may need to do some preparatory work to make it easier to move. See make a split library portable.
Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device for advice on how to set up your devices with a new library with the maximum preservation of data. If you don't have any Apple devices then see HT2519 - Downloading past purchases from the App Store, iBookstore, and iTunes Store.
tt2

How to use the namespace with a parser?

I want to use the namespace in my project. For this reason, I use a sample
from
http://java.sun.com/xml/jaxp/dist/1.1/docs/tutorial/sax/7b_pe.html
http://java.sun.com/xml/jaxp/dist/1.1/docs/tutorial/dom/5_ns.html
to test my understanding.
The slideshow2.dtd refer to the definition in 'xhtml.dtd'. Because in these
two files, they all use the 'title' as the element names. To solve these
conflicts, The namespace is used to qualified the one in slideshow2.dtd.
But the parser still complain that the 'title' in slideshow2.dtd is declared
more than once.
I use apache's Xerces.
I want to know if Xereces realy support namespace spec. now, or how to use
the namespace with a parser. Can anyone kindly tell me where to find some
material that demo the use of namespace in Java program.
Thanks for any help!!!
#############FILE: slideshow2.dtd ###############
<?xml version='1.0' encoding='us-ascii'?>
<!ELEMENT slideshow (slide+)>
<!ELEMENT slide (title?, item*)>
<!ENTITY % xhtml SYSTEM "xhtml.dtd">
%xhtml;
<!ELEMENT title (#PCDATA)*>
<!ATTLIST title
xmlns CDATA #FIXED "http://www.example.com/slideshow"
>
<!ELEMENT item (#PCDATA)>
##############FILE: xhtml.dtd #########################
<?xml version='1.0' encoding='us-ascii'?>
<!ELEMENT html (head)>
<!ATTLIST html
xmlns CDATA #FIXED "http://www.example.com/xhtml"
>
<!ELEMENT head (title,style*)>
<!ELEMENT title (#PCDATA)>
<!ELEMENT style (#PCDATA)>
#############FILE: slideshow.xml ####################
<?xml version='1.0' encoding='utf-8'?>
<!DOCTYPE slideshow SYSTEM "slideshow2.dtd">
<slideshow>
<slide>
<title xmlns="http://www.example.com/slideshow">Wake up to
products!</title>
</slide>
</slideshow>

I want to use the namespace in my project. For this reason, I use a sample
from
http://java.sun.com/xml/jaxp/dist/1.1/docs/tutorial/sax/7b_pe.html
http://java.sun.com/xml/jaxp/dist/1.1/docs/tutorial/dom/5_ns.html
to test my understanding.
The slideshow2.dtd refer to the definition in 'xhtml.dtd'. Because in these
two files, they all use the 'title' as the element names. To solve these
conflicts, The namespace is used to qualified the one in slideshow2.dtd.
But the parser still complain that the 'title' in slideshow2.dtd is declared
more than once.
I use apache's Xerces.
I want to know if Xereces realy support namespace spec. now, or how to use
the namespace with a parser. Can anyone kindly tell me where to find some
material that demo the use of namespace in Java program.
Thanks for any help!!!
#############FILE: slideshow2.dtd ###############
<?xml version='1.0' encoding='us-ascii'?>
<!ELEMENT slideshow (slide+)>
<!ELEMENT slide (title?, item*)>
<!ENTITY % xhtml SYSTEM "xhtml.dtd">
%xhtml;
<!ELEMENT title (#PCDATA)*>
<!ATTLIST title
xmlns CDATA #FIXED "http://www.example.com/slideshow"
>
<!ELEMENT item (#PCDATA)>
##############FILE: xhtml.dtd #########################
<?xml version='1.0' encoding='us-ascii'?>
<!ELEMENT html (head)>
<!ATTLIST html
xmlns CDATA #FIXED "http://www.example.com/xhtml"
>
<!ELEMENT head (title,style*)>
<!ELEMENT title (#PCDATA)>
<!ELEMENT style (#PCDATA)>
#############FILE: slideshow.xml ####################
<?xml version='1.0' encoding='utf-8'?>
<!DOCTYPE slideshow SYSTEM "slideshow2.dtd">
<slideshow>
<slide>
<title xmlns="http://www.example.com/slideshow">Wake up to
products!</title>
</slide>
</slideshow>

How to use union statement with declare & set function?

Hi Experts,
i have small query about how to use union statement with declare & set function?
Example as below :
DECLARE @name AS date
Declare @name2 AS date
/* SELECT FROM [2013].[dbo].[OINV] T0 */
/* WHERE */
SET @name = /* T0.DocDate */ '[%1]'
SET @name2 = /* T0.DocDate */ '[%2]'
select '2013',t5.U_salmannm,t1.CardName,t2.sumapplied as CollectionAmount,t2.DcntSum ,t3.DocTotal as InvoiceTotal,
datediff(dd,t3.DocDate,t1.Docdate) as Days
from 2013.dbo.orct t1
inner join 2013.dbo.RCT2 t2 on t1.DocNum = t2.DocNum
left join 2013.dbo.oinv t3 on
t3.docentry = t2.baseAbs
inner join 2013.dbo.ocrd t4 on t1.Cardcode = t4.CardCode
inner join [2013].[dbo].[@CQ_RTSM] t5 on t4.U_BeatCode = t5.U_RoutCode
where t2.DcntSum <> 0.000000 and t3.DocDate between [%1] and [%2]
Union
/* SELECT FROM [2014].[dbo].[OINV] T0 */
/* WHERE */
SET @name = /* T0.DocDate */ '[%1]'
SET @name2 = /* T0.DocDate */ '[%2]'
select '2014',t5.U_salmannm,t1.CardName,t2.sumapplied as CollectionAmount,t2.DcntSum ,t3.DocTotal as InvoiceTotal,
datediff(dd,t3.DocDate,t1.Docdate) as Days
from 2014.dbo.orct t1
inner join 2014.dbo.RCT2 t2 on t1.DocNum = t2.DocNum
left join 2014.dbo.oinv t3 on
t3.docentry = t2.baseAbs
inner join 2014.dbo.ocrd t4 on t1.Cardcode = t4.CardCode
inner join [2014].[dbo].[@CQ_RTSM] t5 on t4.U_BeatCode = t5.U_RoutCode
where t2.DcntSum <> 0.000000 and t3.DocDate between [%1] and [%2]

You have to create stored procedure in SQL only .
Like u must have create for Crystal .
You can execute procedure in query manager but you have to enter parameter manually..
example
Exec @Test '20140101' '20140501'
Every time user has to enter it manually in yyyymmdd format in case of date parameters.
Example
Create Proc [@Test]
as begin
DECLARE @name AS date
Declare @name2 AS date
/* SELECT FROM [2013].[dbo].[OINV] T0 */
/* WHERE */
select '2013',t5.U_salmannm,t1.CardName,t2.sumapplied as CollectionAmount,t2.DcntSum ,t3.DocTotal as InvoiceTotal,
datediff(dd,t3.DocDate,t1.Docdate) as Days
from 2013.dbo.orct t1
inner join 2013.dbo.RCT2 t2 on t1.DocNum = t2.DocNum
left join 2013.dbo.oinv t3 on
t3.docentry = t2.baseAbs
inner join 2013.dbo.ocrd t4 on t1.Cardcode = t4.CardCode
inner join [2013].[dbo].[@CQ_RTSM] t5 on t4.U_BeatCode = t5.U_RoutCode
where t2.DcntSum <> 0.000000 and t3.DocDate between @Name and @Name2
Union
/* SELECT FROM [2014].[dbo].[OINV] T0 */
/* WHERE */
select '2014',t5.U_salmannm,t1.CardName,t2.sumapplied as CollectionAmount,t2.DcntSum ,t3.DocTotal as InvoiceTotal,
datediff(dd,t3.DocDate,t1.Docdate) as Days
from 2014.dbo.orct t1
inner join 2014.dbo.RCT2 t2 on t1.DocNum = t2.DocNum
left join 2014.dbo.oinv t3 on
t3.docentry = t2.baseAbs
inner join 2014.dbo.ocrd t4 on t1.Cardcode = t4.CardCode
inner join [2014].[dbo].[@CQ_RTSM] t5 on t4.U_BeatCode = t5.U_RoutCode
where t2.DcntSum <> 0.000000 and t3.DocDate between
between @Name and @Name2
end

How to use Stylesheet (XSL) with JSPX ?

Hi!
How to use XSL stylesheets with JSPX pages?
I want use an xsl transformations with jspx pages, I tried using the following syntax, but it didn't work....
<?xml version='1.0' stylesheet type="text/xsl" href="mathml.xsl" encoding='UTF-8'?>
<tr:html xmlns="http://www.w3.org/1999/xhtml">
what is the best way to use xslt with jspx pages?
Thanking you in advance,
Samba

Thanks Ric,
But My problem is not solved..
I'm getting the transformation working in plain HTML
The file given below :
<?xml-stylesheet type="text/xsl" href="mathml.xsl"?>

<html xmlns="http://www.w3.org/1999/xhtml"
>
<head>
<title>Content MathML Examples</title>
</head>
<body>
<div style="border-style:solid; border-width:1px; margin: 1em 1em 1em 1em; padding: 1em 1em 1em 1em;color:gold;background:grey;">
<pre><![CDATA[<math xmlns="http://www.w3.org/1998/Math/MathML">
<apply>
<eq/>
<apply>
<abs/>
<ci> x </ci>
</apply>
<piecewise>
<piece>
      <apply><minus/><ci> x </ci></apply>
      <apply><lt/><ci> x </ci> <cn> 0 </cn></apply>
</piece>
<piece>
      <cn> 0 </cn>
      <apply><eq/><ci> x </ci> <cn> 0 </cn></apply>
</piece>
<piece>
      <ci> x </ci>
      <apply><gt/><ci> x </ci> <cn> 0 </cn></apply>
</piece>
</piecewise>
</apply>
</math>]]>
</pre>
<math xmlns="http://www.w3.org/1998/Math/MathML">
<apply>
<eq/>
<apply>
<abs/>
<ci> x </ci>
</apply>
<piecewise>
<piece>
      <apply><minus/><ci> x </ci></apply>
      <apply><lt/><ci> x </ci> <cn> 0 </cn></apply>
</piece>
<piece>
      <cn> 0 </cn>
      <apply><eq/><ci> x </ci> <cn> 0 </cn></apply>
</piece>
<piece>
      <ci> x </ci>
      <apply><gt/><ci> x </ci> <cn> 0 </cn></apply>
</piece>
</piecewise>
</apply>
</math>
</div>
</body>
</html>But the same thing is not working when put in jspx page..
And I tried to use JSTL as you have suggested :
But the content is not getting transformed.
Here is the jspx page :
<?xml version='1.0' encoding='UTF-8'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.0"
          xmlns:h="http://java.sun.com/jsf/html"
          xmlns:f="http://java.sun.com/jsf/core"
          xmlns:af="http://xmlns.oracle.com/adf/faces/rich"
          xmlns:c="http://java.sun.com/jsp/jstl/core"
          xmlns:x="http://java.sun.com/jsp/jstl/xml"
          xmlns:m="http://www.w3.org/1998/Math/MathML"
          xmlns:xh="http://www.w3.org/1999/xhtml">
<jsp:directive.page contentType="text/html;charset=UTF-8"/>
<f:view>
    <af:document binding="#{backing_xsltTest.document1}" id="document1">
<div style="border-style:solid; border-width:1px; margin: 1em 1em 1em 1em; padding: 1em 1em 1em 1em;color:gold;background:grey;">
<f:verbatim>
<pre><![CDATA[<math xmlns="http://www.w3.org/1998/Math/MathML">
<apply>
<eq/>
<apply>
<abs/>
<ci> x </ci>
</apply>
<piecewise>
<piece>
      <apply><minus/><ci> x </ci></apply>
      <apply><lt/><ci> x </ci> <cn> 0 </cn></apply>
</piece>
<piece>
      <cn> 0 </cn>
      <apply><eq/><ci> x </ci> <cn> 0 </cn></apply>
</piece>
<piece>
      <ci> x </ci>
      <apply><gt/><ci> x </ci> <cn> 0 </cn></apply>
</piece>
</piecewise>
</apply>
</math>]]>
</pre>
</f:verbatim>
<c:import var ="mathml" url="/mathml.xsl"/>
<x:transform xslt="${mathml}">
<math xmlns="http://www.w3.org/1998/Math/MathML">
<apply>
<eq/>
<apply>
<abs/>
<ci> x </ci>
</apply>
<piecewise>
<piece>
      <apply><minus/><ci> x </ci></apply>
      <apply><lt/><ci> x </ci> <cn> 0 </cn></apply>
</piece>
<piece>
      <cn> 0 </cn>
      <apply><eq/><ci> x </ci> <cn> 0 </cn></apply>
</piece>
<piece>
      <ci> x </ci>
      <apply><gt/><ci> x </ci> <cn> 0 </cn></apply>
</piece>
</piecewise>
</apply>
</math>
</x:transform>
</div>
      <af:form binding="#{backing_xsltTest.form1}" id="form1">
      </af:form>
    </af:document>
</f:view>

</jsp:root>Can you please suggest where I'm doing wrong?
Thanking you in advance,
Samba

How to use File Adapter with hierarchial Structure?

Hi,
How to use File Adapter with hierarchial Structure like..
Data:
--Header Details:
Line Item Details:
Data
Bcoz I am getting a Flatfile in a hierarchial way as shown below.
Header Details :1
Line Item a
Line Item b
Header Details :2
Line Item c
Line Item d
Kishore

Hey Kishore,
In order to create a structure you need to use the file with convertion mode on the sending communication channel of the file adapter.
check the link for the needed configuration paramters.
If the structure is more complexed you can use the Contetnt master(CM) from itemfield which allows to ceate XML file from complex flat files and more.
<a href="http://help.sap.com/saphelp_erp2005/helpdata/en/0d/5ab43b274a960de10000000a114084/frameset.htm">File sender adapter</a>
If you have any question i'll be more than happy to assist.
Nimrod Gisis

Does anyone know step by step how to use a PC with an AppleTV?

Does anyone know how to use a PC with an AppleTV and can this be done and if so, how?

Welcome to the Apple Community.
How far have you got into the set up process please.

How to use wild card with variable in powershell

Similar Messages

Maybe you are looking for