How to use Win 2012 r2 Server Hyper-V?
How to use Win 2012 r2 Server Hyper-V? Can we install Virtual OS in new machines(which doen't have any OS)? OR it required any OS in client machine to access Virtual OS of Hyper-V?
Regards
Meer Akbar Ali
Hi Meer,
In addition , here is a video link about installing OS in VM (it is 2008 but it is similar to 2012R2 ):
http://technet.microsoft.com/en-us/video/hh859745.aspx
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.
Similar Messages
-
Slow applications start from win 2012 file server using win 7 workstations
I hope someone can help me with why applications are slow to load i have replaced a 8 year old server running win 2003 and replaced it with dell t620 running win 2012 r2 it is like 20 times faster but it is slower than the old server. the office has
7 win 7 x64 machines all our applications are running from win 2012 file server. The server is set up as following the server runs with two hyper-v machines one machine runs ad, file server, dhcp, dns and printer server and the other is domino server and remote
desktop.
the machine is more than capable but it is not so i started reading after i run out of ideas. i looked every where but the issue is with the server after trying everything else i did a simple test If i go to the application folder and click on it apps load
instantly if i then type a unc path it takes from instant load to 3 and a bit seconds the same as the workstations. The same speed if I use ip address.
network cards are intel
i would really appreciate if somebody has suggestions that i could try
thank youHi,
Do you mean that applications in the application folder start slowly when you access the application folder on the Windows 2012 R2 file server from Windows 7 workstations using UNC path or IP address. Do all the files in the application folder have the same
issue? Please create a shared folder on the file server, then access the shared folder from Windows 7 workstations to check if the issue still exists.
You could disable SMBv3 on server 2012 to check if the issue related to SMB protocol.
How to enable and disable SMBv1, SMBv2, and SMBv3 in Windows Vista, Windows Server 2008, Windows 7, Windows Server 2008 R2, Windows 8, and Windows Server 2012
http://support.microsoft.com/kb/2696547/en-us
Warning: We do not recommend that you disable SMBv2 or SMBv3. Disable SMBv2 or SMBv3 only as a temporary troubleshooting measure. Do not leave SMBv2 or SMBv3 disabled.
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
How to use the same OC4j server with different port number
How to use the same OC4j server with different port numbers..?
I have to OC4J installed on my machine on different hard disk drives....
I want to be able to run both the server simultaneously..?
is it possible ..it yes then how..?
for that i have changed the port number of one server...
but when i am trying to start the other server with different port number..it says that JVM -Bind already...
Is there any clues...?
Nilesh GIn the config directory:
default-web-site.xml: Change the port the HTTP listener listens on
jms.xml: Change the port the JMS service listens on
rmi.xml: Change the port the ORMI listener listens on.
Or, you can add another web-site.xml file, and deploy your applications to 1 server, and bind the web applications to the different web sites. This way you only have to deploy your applications to 1 place.
Rob
Oracle -
How to use mysql in J2EE server?
Hi all,
I have been learning J2EE and playing around with Pointbase as my database and the IDE that I'm using is Forte For JAVA 4 EE.
Now, I wanna use mysql in J2EE, EJB. But I do not know how to use mysql in j2ee server. I have try to altered the resources.property file by adding a few lines to called the MYSQL datasource and driver. But, it give me errors when i am doing the deployment process. Can any1 of u help me?
Thanks in advance..Hi,
I guess there must be some problem with your App Server Configuration settings:
Kindly Check if you are using the following ones:
Driver Name: com.mysql.jdbc.Driver
Url: jdbc:mysql://[hostname][,failoverhost...][:port]/[dbname][?param1=value1][¶m2=value2].....
Thanks & regards,
Paritosh
Software Engineer
L&T Infotech Ltd -
How to use SCOM 2012 R2 Monitoring the standalone Windows Server
Greetings,
I want to use SCOM 2012 R2 to monitoring the standalone Windows Server that does not joined the domain. would you please guide me how to configure it.
Thanks
Frank@Hiweb 冯立超@瀚博资讯I found the answer, as following:
http://pkjayan.wordpress.com/2010/05/17/agent-managed-non-trusted-servers-without-gateway/
and
http://blogs.technet.com/b/stefan_stranger/archive/2012/04/17/monitoring-non-domain-members-with-om-2012.aspx
Frank@Hiweb 冯立超@瀚博资讯 -
How to use itunes for windows server 2003
how to install itunes for windows server 2003
Purchased music from the iTUnes store is in a "AAC protected" format. It can only be used in iTUnes. Any music you buy online these days will have some protection on it where you can only use it in there program.
The way around this is to burn the purchased songs to a CD in iTUnes. Then goto edit>preferences>advanced tab>Import sub tab and set your import settings to something like MP3.
Now put the burned CD back in the PC and "Re"import it into iTunes so its imported in a MP3 format so you can use it in any program. Before importing it tho you need to manually add the name of the song, artist album ect ect -
How to use Fibre Chanel matrifx for Hyper-V Cluster
Hi
I created Hyper-V Cluster (2012 R2) and have Fibre Chanel matrix (4 TB). Is it better co create one big lun for hiper-v storage or create two small luns (2 x 2 TB). Where will be better I/O? All disk used in matrix are the same.
Thank you for help
Kind Regards TomaszHi Yukio,
I agree with Tim , the best way is to contact with hardware vendor for the disk construction of FC storage .
Based on my understanding , if these "basic disks" are same and controlled by same controller , I think it will not create any I/O when you divide it , the total amount of I/O is equal .
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
How to use XML on another server?
I need help figuring out how to consume XML from another
domain. It's a domain that is providing search functionality for a
website. The domain indexes my site, and I can "post" searches to
an URL with my search terms URL-escaped. It returns an XML
document. I want to use Spry to consume that XML.
I'm pretty experienced consuming XML and using it in Spry
pages, but to date have not done anything that crosses domains. I
will have access to Perl on the production box that hosts my site,
with a remote chance that I could get PHP enabled. This is a public
web server for a very very large financial company, so my choices
of what can go on a production server outside our firewall are
limited by corporate policy.
What are the basic steps that need to happen? Can someone
bullet-point how this might work from one end to the other? I have
the basic theory down of what needs to happen, but not much else at
this point.
Here is what I understand:
1 - user fills in search form and hits enter
2 - form posts to a Perl script on my box
3 - Perl takes the form variables and appends them to a URL
request to the 3rd party search domain
4 - 3rd party search company returns an xml file
5 - not sure what Perl needs to do here with the xml so that
my HTML page with Spry can read it....it does something, let's just
say
6 - Perl writes out a page, based on a template in my site
that then consumes the XML that is somehow available on my domain
now...
This raises so many questions...like if I save the results
XML on my server, how do I get rid of them after they are consumed
and also how do I prevent other sessions from accessing that "saved
copy" of XML...I know I'm thinking wrong here. That can't be how
it's done...Hence...my question about all this.
Where do I start?
Thanks,
Douguser12004297 wrote:
thank you so much - however on the source database I dropped tables and users- then I did an "alter system switch logfile;" - copied the archivelogs to the / test DRP and loaded the archivelogs and the users and tables were not dropped like i did in source
RMAN> tartup mount
Oracle instance started
database mounted
Total System Global Area 1119043584 bytes
Fixed Size 2227624 bytes
Variable Size 620757592 bytes
Database Buffers 469762048 bytes
Redo Buffers 26296320 bytes
RMAN> CATALOG START WITH '/oradb1/backup';
using target database control file instead of recovery catalog
searching for all files that match the pattern /oradb1/backup
List of Files Unknown to the Database
=====================================
File Name: /oradb1/backup/1_345_819727387.dbf
Do you really want to catalog the above files (enter YES or NO)? YES
cataloging files...
cataloging done
List of Cataloged Files
=======================
File Name: /oradb1/backup/1_345_819727387.dbf
RMAN> recover database;
Starting recover at 20-NOV-13
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=249 device type=DISK
starting media recovery
media recovery complete, elapsed time: 00:00:02
Finished recover at 20-NOV-13
RMAN> alter database open;
database opened
RMAN
Simply making the database aware of the archivlogs does NOT mean rman will determine they need to be used for a specific recovery operation. What all had you done to/with this database prior to this? Keep firmly in mind the effect of any OPEN RESETLOGS. -
How to use the integrated ITS server in WAS6.40 for WEBGUI
Hi,
I am testing the Portal 6.0SP6 on WAS6.40SP7.
Using User Mapping, I am able to connect and call some transaction to R/3 System (4.6c) and the ITS servers for the R/3 system. If I am going to use webgui to call a transaction, do I need the ITS server at all? The reason I asked because I thought WAS6.40 came with an embedded ITS server.
If I can make use of the integrated ITS server, how do I configure the system connection?
Thanks,
Edmond wongI have read the past posts, but I am still not clear... We are implementing mySAP ERP 2004. This will include ECC 5.0 and EP 6.2.
We currently have R/3 4.6C and EP5.5. From EP 5.5 I have users executing R/3 transactions directly from EP using the standard Master iView. This traffic goes via the ITS virtual instance for the R/3 system.
I am trying to decide if I need to setup a separate ITS to continue to do what we do now OR if the direct call of a transaction from EP6.2 using the SAP supplied Master iView can be accomplished using the Internal ITS on ECC 5.0. We do not have the DEV systems set up so I cannot test.
Any comments?
Thanks,
Rich -
How to use 1 profile on server for multiple PCs
Is it possible to move an existing profile (at all!) to a home server and configure it as the default - if not only - profile on other installations on other PCs, thus avoiding sync-related plug-ins?
A [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] can only be used by one person (Firefox instance) at the same time.
http://kb.mozillazine.org/Profile_in_use<br />
http://kb.mozillazine.org/Roaming_profiles<br /> -
How to use mathscript node in server side with the parameter from the client side
I tried to develop a server/client system with some algorithms written in matlab. So I included a mathscript node on the server side. The client will send the parameter to the server. According to these parameters, the sever will call the matlab functions to do some computings and then send the results back to the client. The server has to wait for all parameters received before the computings. How do I know this since I only connect the parameter variables to the inputs of mathscript node on the server. The sever cannot know whethere these parameters are the new ones or old ones since the client may send parameters multiple times?
It seems to me you have two perfectly good options to start with. You could send all possible parameters in a single packet from the client to the server. This could be in the form of a cluster or an array of values. If by server/client you mean you are sending data over the network, then you could flatten this data to string before sending and unflatten it on the other side. Since all parameters come in one packet, you know all the data is valid every time you send data.
The other option is to send the parameters individually, but include some extra information such as a timestamp or iteration count. The server keeps reading and storing parameter values until a packet arrives with the next timestamp. Alternatively, you could include some information such as an end-of-parameter-list boolean that is sent with every parameter. It would be false until the last parameter packet.
Give it a thought. There are lots of solutions.
Jarrod S.
National Instruments -
How to use Apache as Web Server
Hi,
Who can help me? Thanks a lots.
I've installed Apache + Apache JServer + Oracle JSP in my NT server. Who can tell me how to set iFS in order to make it run with Apache and Apache JServer
nulli do not know for certain about the jsps you're talking about, but i would guess they should run just fine under jrun, and you wouldn't have to make jrun and jserv coexist.
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by One:
Hi ilya:
Thank you for your quick reply.
I will try that way but I wonder if the thing like "how about the *.jsp developed by the JDeveloper and BC4J run under JRun; could and is it necessary to make the Apache+JServ and Apache+JRun co-exist ... "<HR></BLOCKQUOTE>
null -
How can using 'jMaki' in weblogic server 10?
i tried 'jmaki' in wls10.
but fail
jmaki added follow
WEB-INF/lib/ajax-wrapper-comp-1.8.0.jar
org.json-0.0.2.jar
jsfcompounds-core-0.0.6.jar
when i deployed, rising the exception...
<2008. 10. 30 오전 2시 14분 59초 GMT> <Error> <Deployer> <BEA-149265> <Failure occurred in the execution of deployment request with ID '1225332882375' for task '25'. Error is: 'java.lang.NoClassDefFoundError: com/sun/jmaki/AjaxWrapperTag : javax/faces/webapp/UIComponentBodyTag'
java.lang.NoClassDefFoundError: com/sun/jmaki/AjaxWrapperTag : javax/faces/webapp/UIComponentBodyTag
at java.lang.ClassLoader.defineClass1(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:620)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)
at weblogic.utils.classloaders.GenericClassLoader.defineClass(GenericClassLoader.java:338)
at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:291)
Truncated. see log file for complete stacktrace
java.lang.NoClassDefFoundError: com/sun/jmaki/AjaxWrapperTag : javax/faces/webapp/UIComponentBodyTag
at java.lang.ClassLoader.defineClass1(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:620)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)
at weblogic.utils.classloaders.GenericClassLoader.defineClass(GenericClassLoader.java:338)
at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:291)
Truncated. see log file for complete stacktrace
how can fix this problem?which cache are you talking about? Coherence cache?
Or maybe you are talking about code cache, as explained here http://wlatricksntips.blogspot.com/2010/07/clearing-cache-for-weblogic-instance.html ? -
How to use impersonation in project server 2013 using csom object model
Hi sir ,
I have try to see only my projects.Means with project server permission with help of impersonation .
vijayIn addition to Lars' good advice, please find this
blog from Paul about risks and issues reporting with OData.
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS | -
How to use win media player in streaming
Hi all
I want to do an application that is streaming live video on network and playable from windows media player on client side. Is this possible with JMF? Or how can I do this with another way?wpafbuser1 wrote:
Is this possible with JMF? Yes.but how ?
Maybe you are looking for
-
Dispatcher dies after afew seconds
The dispatcher on my CI dies after afew seconds. In SAPMMC the SID becomes green then the message server closes the connection to the dispatcher forcing all WP's to die. The error on the message server: ERROR => MsSClientHandle: no server provides se
-
I am trying to download free apps and it is asking me to sign in and give billing info ie credit card, how do. Fix this I have downloaded free apps in the past without having to provide this info. Can anyone help?
-
I am having trouble installing lightroom 5 with this error message: Payload: AdobeLightroom5CCMPkg-mul 5.2.0.0 {4b06fc24-6249-4c57-9830-6008a3ce9a80} ----------- ERROR: DW006: Apple Package failed to install successfully. ERROR: Third party payload i
-
Hi, i buyed two WRT54GC Ver 2.0 Manufactured 07/2007, i can't access to configuration web interface, i try with the default login leaving in blank and password password "admin", so i try make a hard reset but the problem persist, how i can do? thanks
-
Hi, i m using DWR to populate the combo box based on the selection of value of the first combo box. When i submit , i come to same page...so i want the previous values to be there. So the 2nd combo (whch is populated by DWR) should also have the prev