How to use wireless adapter in Satellite C660D?

Hi everyone!
Got crazy searching for the wireless adapter in Satellite C660D-164..does it have one inbuilt? or do I have to buy an external one? Can't figure out how to set up wi-fi and bluetooth. The manual is non descriptive.
Installed all the drivers form site.
Pleas help asap.

Hi
In the device manager you can find the list of all available devices.
Under Network Adapters you should find the available Wlan card.
In order to use the Wlan, you have to enable this firstly.
Use Fn + F8 in order to switch ON the Wlan.
Then you should see a small icon in the task bar (right bottom corner). Right click on this and check if you Wlan Home Network is visible.
Then insert the encryption password and usually the notebook should connect to the home Wlan.

Similar Messages

How to use File Adapter with hierarchial Structure?

Hi,
How to use File Adapter with hierarchial Structure like..
Data:
--Header Details:
Line Item Details:
Data
Bcoz I am getting a Flatfile in a hierarchial way as shown below.
Header Details :1
Line Item a
Line Item b
Header Details :2
Line Item c
Line Item d
Kishore

Hey Kishore,
In order to create a structure you need to use the file with convertion mode on the sending communication channel of the file adapter.
check the link for the needed configuration paramters.
If the structure is more complexed you can use the Contetnt master(CM) from itemfield which allows to ceate XML file from complex flat files and more.
<a href="http://help.sap.com/saphelp_erp2005/helpdata/en/0d/5ab43b274a960de10000000a114084/frameset.htm">File sender adapter</a>
If you have any question i'll be more than happy to assist.
Nimrod Gisis

How to use File Adapter in BPEL

Hi,
How to use File Adapter in BPEL. I am using Oracle SOA 10g. Any sample or best example in blog or elsewhere ?

Hi,
Please check the below links for samples on how to use file adapter in BPEL (in 10g/11g usage is same) and let me know any further queries.
11g - http://blogs.oracle.com/theshortenspot/entry/soa_suite_integration_part_3_l
10g - http://erpschools.com/articles/bpel-file-adapter-tutorial

How to use the adapter framework sample_ra.

hi..
I have deployed the sample_ra adapter framework code through NWDS. Now how to use the adapter framework into my scenario.Please answer elaborately .How to call this adapter framework while configuring the communication channel.

hi
Follow these links I think it will helps you
http://www.sap-hefte.de/download/dateien/1241/140_leseprobe.pdf
NWDS and generate java proxy
http://help.sap.com/saphelp_nw2004s/helpdata/en/32/43d84072378031e10000000a1550b0/content.htm
http://msdn2.microsoft.com/en-us/library/ms944509.aspx
thanks and regards
santosh

Boot from LAN using Wireless Adapter

I have one Cisco Wireless PCI Adapter. Does it have a feature like PXE BootROM in NIC, so I can boot from LAN using wireless adapter?

I'm pretty sure it doesn't. At issue would be the necessary setup for things like SSID.
Maybe in the future; many motherboards & chipsets are including Wireless NICs, they would need to provide some setup in the BIOS to configure the basic communication parameters necessary to establish the Layer one / Layer two link.
Good Luck
Scott

How to use Database adapter as inbound adapter without having polling strategies?

Hi All,
I have a requirement wherein I have to use Database adapter to retrieve the data for every half an hour from one(X app) database and update that data into another application(Y app) .That database adapter will be along with BPEL process.My Flow would be like this:
Database Adapter( In 'exposed services' section) ----->   BPEL (in 'Components') -----> Y app service( in 'External References' section)
My questions for each step are below
     1) I have to retrieve the data from database(x app database) for every half an hour.So I have to schedule my whole process such that it should execute for every half an hour.
Means I have to get whatever the data is updated in the last half an hour in that database.
      The database adapter should be inbound in SOA composite editor(in 'Exposed services' section).
But in order to have inbound adapter,we have select the 'Poll for New or Changed Records in a Table' option in turn we have to select one of polling operations below:
         Delete the Row(s) that were Read
Update a Field in the [Table_Name] Table (Logical Delete)
Update a Sequencing Table
Update an External Sequencing Table on a Different Database
Control Table Strategy
But the problem is I don't have any control on the database(X app database) ,So (I can't update any data on that table,because that table may not have a field or table to update the processed rows)I can't choose any of the above operations.
How can I achieve what I want that is to retrieve the data and schedule the process?
Thanks in advance.

Hi Heckler,
Thank you very much for your answer that I can proceed further somehow.
I still need to have some clarifications.
In order to have a process which retrieves the data (Inbound operation) and updates the data into other application, the data(from X app) should be the request(through DB adapter) of the BPEL process.
X app does not do anything to send.We have(the BPEL process) to receive the data (or) no event is triggered.
The flow :
Database Adapter( In 'exposed services' section to retrieve data) ----->   BPEL (in 'Components') -----> Y app service( in 'External References' section)
How can we ensure the data will be request to BPEL process(means it will be in 'exposed services' section in SOA composite editor) for every half an hour if we use pick activity and database adapter as first activity?
When we use ''Poll for New or Changed Records in a Table' ,then only adapter becomes inbound and comes into the 'exposed services' section.I can't use it as I don't have any control on the source table.
I have this confusion before starting the process.Please help me to clear out the doubts.
And this whole process should be executed automaticallly for every half an hour(means it creates instance for every half an hour) Once we build the BPEL process.
How to schedule it?
And where do I need to create control table ?You mean I have to use some different database where in I have to create the table?

How to use Database Adapter in BPEL

I want to use Database Adapter in BPEL to transfer data from one table to other table and the data is still hold in the read table?
I can find a example from http://download.oracle.com/docs/cd/B31017_01/integrate.1013/b28994/adptr_db.htm#BDCIGDCB.
And the general design of my BPEL is as following:
1. Add a "status" column to the read table. And alter the value of status column of all data in read table to "unreaded".
2. Then create a empty BPEL (BPELAdapter) Project.
3. Add a Database Adapter:
(1) In step 1 of Adapter Configuration Wizard, configure the Service Name to datain.
(2) In step 2, configure the database connection.
(3) In step 3, choose "Poll for New or Changed Records in a Table".
(4) Then click Import Tables button, and choose the read table.
(5) In step 5, choose a column.
(6) Don’t do anything in step 6 and 7.
(7) In step 8, choose "Update a Field in the [Datain] Table (Logical Delete)".
(8) In step 9, configure Logical Delete Field to STATUS, configure Read Value to readed and configure Unread Value to unreaded.
(9) Don’t do anything in step 10 and 11.
4. Add a receive activity to connect to above database adapter.
5. Add another Database Adapter. Then configure this database adapter service WSDL:
(1) In step 1 of Adapter Configuration Wizard, configure the Service Name to dataout.
(2) In step 2, configure the database connection.
(3) In step 3, choose Perform an Operation on a Table (and all items under it).
(4) Then click Import Tables button, and choose the write table.
(5) In step 5, choose a column.
(6) Don’t do anything in step 6, 7 and 8.
6. Add a invoke activity to connect to above database adapter.
7. Add a assign activity between the receive activity and invoke activity. And configure the assign copy operation.
But after I deploy this BPEL project to the BPEL server and invoke this project, I get following error. Meanwhile, this BPEL don't take effect.
The following exception occured while processing this request:
Can't find partnerLinkType 2.
in
"file:/D:/soft/SOASuite/product/10.1.3.1/OracleAS_1/bpel/domains/default/tmp/.bpel_BPELAdapter_1.0_e82210b05e4d3e997eed581d0d220293.tmp/_BPELAdapter.wsdl" WSDL to find PartnerLinkType "{http://xmlns.oracle.com/pcbpel/adapter/db/datain/datain_plt"。
How to resolve?
Thanks,
Melody

Now, I can insert data into the table through Database Adapter.
But still can't select data from the table through Database Adapter.
Above error still happen when invoke the read database table with Database Adapter project:
Can't find partnerLinkType 2.
in
"file:/D:/soft/SOASuite/product/10.1.3.1/OracleAS_1/bpel/domains/default/tmp/.bpel_BPELAdapter_1.0_e82210b05e4d3e997eed581d0d220293.tmp/_BPELAdapter.wsdl" WSDL to find PartnerLinkType "{http://xmlns.oracle.com/pcbpel/adapter/db/datain/datain_plt"。

How to use File Adapter Receiver to write attachments

Hi,
i have a scenario, in which our own XInotes adapter sends an XIMessage from an IBM Lotus Notes database into XI. This XIMessage contains an XML document as application main document and several PDF files as additional attachments
On the receiver side, i must use a File Adapter to write both the XML documents and the PDF attachments into a directory.
The problem is i don't know how to use the file adapter receiver to write the attachments. In the Channel Monitoring, i can see that all PDF files are transferred to the file receiver. But the file adapter writes only the XML document into the directory.
I've also tried the AF_Modules/PayloadSwapBean, but it can only swap one PDF file into the application payload. And the file name must be hard coded in the module configuration as swap.KeyName.
Could anyone give me any ideas?
thanks a lot in advance
Xiang

hi,
receiver file adapters do not supprt attachments.
Only File Sender adapter is capable of handling attachments not the receiver.
http://help.sap.com/saphelp_nw2004s/helpdata/en/4b/a20c4cfea96b498b1e1af3f32f0670/frameset.htm
Configuring the sender FILE adapter
The sender file adapter is configured to pick the normal payload (file1.xml), which is specified in the File
access parameters, and the additional image file (file1.jpg) that is to be sent as an attachment is configured
under the Additional File(s) as shown in the screenshot below. The file type would still remain binary.
Since, by default, XI sends payload and attachments in XML format, we need to call two beans, namely the
MessageTransformBean and the PayloadSwapBean to help us is transforming the content to jpeg format
and also change the file extension.
The PayloadSwapBean module is used to replace the application payload of the XI message that holds the
data with another payload which is appended to the message as an attachment. In our case, the payload
would be file1.xml whereas the attachment would be file1.jpg
The swap module is denoted in our scenario with the module key swap. It has two parameters from the
MIME header.
regards,
pradeep.

How to Use JCA adapter

Hello.
I have a JCA compliant adapter that i like to use to integrate a legacy application but i have seen no information on how to use a JCA adapter from Oracle Integration.
Any help is appreciated.

Hi Gerardo
Oracle Interconnect 10g enables third party adapter integration through a proprietary SDK, which is not JCA compliant.
Oracle ProcessConnect relies on JCA (plus more) for communicating with standard and third party adapters. Since ProcessConnect 10g is based on JCA 1.0 (due to spec availability), Oracle had to extend the JCA 'contract' with certain Design Time and Runtime inbound API's which an adapter also must implement in order to seamlessly interoperate with ProcessConnect. Oracle can provide you with the necessary ADK (Adapter Development Kit) if you join the Early Access program.
Please indicate here if you would like to join this program and I will provide you with pertinent contact information so you can initiate this.

Manage how to use wireless internet to phone E71

Sorry, but I have a wireless D-link machine at home.I actually want to know how to use internet on my phone .
Thank you

Hi aladdin22
Have a look at this post:/discussions/board/message?board.id=smartphones&message.id=83014#M83014
Don't use CD version of PC Suite but latest from here:http://europe.nokia.com/pcsuite
Lastly make sure that your E71 is in "PC Suite" mode NOT "Data Transfer" mode, go to Menu > Connectivity > USB > USB connection mode.
Happy to have helped forum in a small way with a Support Ratio = 37.0

How to use File Adapter to transport files

Hi,
Can i use File Adapter Additional Files settings to Transfer files from one system to other without conversion?
File Adapter's Additional Files documentation says "additional attachments require a receiver that can process them". In my case receiver is also
File Adapter.
Please let me know if there is any other way to achive this.
Thanks in Advance
Jayant

Hi Jayant -
Here is the link to the documentation related to this:
http://help.sap.com/saphelp_nw04/helpdata/en/3c/b4a6490a08cd41a8c91759c3d2f401/content.htm
Notice in "Rules for Additional Files":
"Messages with additional attachments require a receiver that can process them."
Currently, the receiver file adapter does not support the processing of attachments.
Regards,
Jin

Re: Hi friends How to use sseeburger adapter in SAP PI

I am newly in sap pi.
can any one explain Seeburger adapter briefly

Hi Ranga,
Welcome to SCN.
As you are new around here, i suggest you to please search the forum before posting your question.
To answer to your question, Seeburger is the name of the company which provides its set of adapters for SAP PI.
I assume that you are talking about the Seerburger AS2 adapter, as it is the mostly used seeburger adapter.
The Seeburger AS2 adapter is capable of translating an EDIFACT/ ANSIX12 message/file into a format that is understood by PI and vice versa.
It is also capable of handling the AS2 transport protocol (EDI Over internet).
Best Regards,
Ravi

How to use AQ Adapter for Enqueue and Dequeue in BPEL process

Can anyone help me how to use Enqueue and Dequeue in BPEL process ? Any good sample or material /tutorial??
Thanks

You shoul create a while loop, that loops through XML payload for each row. Than you can process each individual row. See also example:
C:\orabpel\samples\tutorials\112.Arrays\ArraySample.bpel

How to install wireless on a Satellite 5200-903?

Due to a very bad virus I recovered Windows on a Satellite 5200-903 of a friendly businessman. But back home he saw: no wireless LAN could be used... It seems, that cause the WLAN-switch was "off" no WLAN-driver was installed/recovered...
Now he wants to come to me again tomorrow or the day after tomorrow - and I MUST know, how to install everything until then... he also will bring me his router, so I can configure everything for him on the notebook AND router (WPA, if possible).
But I found TWO drivers: one was a direct download of a small file of "Agere" - wlesslan-xp-7620390.zip
The other is from "Atheros", and the download is a links to another website "Toshiba EMEA - Wireless LAN Driver Portal" http://aps2.toshiba-tro.de/wlan/?page=downloads , where I have to identify the WLAN adapter... But: on the first download-site (I mean BEFORE redirected to "Toshiba EMEA") there is at the list "Model" NOT any Satellite 5200.
Which driver is correct? Are there different WLAN-adapters in the 5200-903 series? Is it possible to find out the adapter model BEFORE he gives me the Notebook?
And in the list of drvers for the 5200-903 there was a download "WLAN hotkey" wlkey-xp-2003.zip ? Do I need that too? Do I need any other things?
And does such an "older" WLAN-Access work in another way than the integrated WLAN of a centrino e.g. ? I just know how to log into a WLAN with newer notebooks: button "wireless networks" on the right buttom oft windows, then chose the WLAN name to connect and type in the key, if needed.
Please help me, he lives 100 miles away from me and has not much time, he comes again to me just for that matter, and of course he was not amused when he returned home and couldn't connect to the internet... and he's an ABSOLUTE noob in technical things, so I cannot tell him how to do it on his own and need your help quickly.
Thanks a lot!

Hello Herb
I just want to make the whole story short and simply. After installing OS install drivers for hardware components. According the notebook specification for Satellite 5200-903 it is WLAN ready model and I do not know which WLAN card is inside. You friend should have info about that.
If there is Atheros WLAN card the right driver you can find HERE
After driver installation install all Toshiba designed tools and utilities starting with COMMON MODULES. It must be installed at first. WLAN-hotkey utility is important because using FN+F8 key combination you can enable/disable WLAN card.
WLAN software (Atheros WLAN client utility) is not necessary because for WLAN you can use WXP WLAN settings. You can use it if the WLAN card is activated properly.
So I hope you will set WLAN properly and if you need more assistance please write again.
Bye and good luck!

How to install WLAN adapter in Satellite Pro A10

I am trying to set up a wireless connection with my Satellite Pro A10. I thought it was wireless enabled, but when I toggle the wireless switch, no light comes on and there is no wireless card listed under Network adaptors (so I guess not).
How easy is it to install a wireless adaptor (i.e. can I do it myself or do I need to have it done by a professional)? Can anyone recommend which card I should by (or any I should avoid)?
Thanks.

Hi
According the notebook specification your Satellite Pro A10 is WLAN ready. In notebook specification there are listed two compatible WLAN cards:
PA3212U-4MPC (Agere 802.11b) and PA3273U-2MPC (802.11a/b).
I really do not know if you can use some faster WLAN cards with standard g. Maybe you will be lucky and someone will post here WLAN card upgrade results.
I am not 100% sure where the WLAN slot is placed but check please under the cover placed nears the battery.

How to use wireless adapter in Satellite C660D?

Similar Messages

Maybe you are looking for