How to use your Global ready phone in Mexico.

PREVIEW
Traveling Abroad in Mexico with a Verizon Phone
How to Use a Verizon Global Ready Phone Abroad
 So your planning a trip to Cancun Mexico and want internet/cell service with out paying Roaming fees to your U.S service provider here is what you need to know to have access to Facebook, Vonage, Google maps, email and other apps while abroad.
I will cover two bases one for your Global ready/Unlocked phone and the other for a personal Hotspot in your room or wherever your laptop will be this is only If you plain to purchase or have semi-free WiFi service from the Hotel.First I will cover your smartphone:
The phone I used and test this with was mostly on my Razr Maxx from Motorola from the Verizon network. This can also worked with a Iphone 4S (You need to call Verizon First before traveling) please check out this thread to use your iPhone Unlocking Iphone for International Travel
Note: you only have to do this once per-iPhone after that it is global ready as long as you own it.
For a Android phone they are Global ready phones no need to call Verizon it is already ready. Popular Android phones that are Global ready ie. Razr, Razr Maxx,plus both HD versions also, The Samsung GS3 and GS4 are Global ready.
For those who don't know, All Verizon 4G phones carry a sim card inside. They can be replace with a non-U.S carrier sim.(Make sure you insert the sim in the right way or it will not work.) If you try to use a none Verizon sim in the U.S it will be blocked by The Verizon network.
Verizon runs off of both GSM and Cdma networks but while aboard you have a option to change these features.
By pressing the menu button click System Setting> More / Wireless & Networks>Mobile Networks>Network Mode.
Step 1.
Most important leave your phone in airplane mode once you reach your destination you can still use WiFi while your phone is in this mode. While in Mexico or any country aboard you will need a local sim from any carrier that is GSM. A prepaid sim works great, some/most company's will make you pay a fee for the sim and they will not provide any help with setting your phone up to there services.
Here are a two reasons why. #1 You did not buy it from them. #2 They really don't know your Verizon, AT&T and T-mobile phone setup, Yes it is different then the same phones they sell on their own network. So buying a prepaid sim card is your best option then paying roaming fees to your U.S carrier.
After you have you sim you purchase the Data amount you think you will need you I got 1GB which was way more then enough for 5 days. I was consistently using my phone checking in on Foursquare etc.. you will also receive a local phone number too. I used a telcel sim card In Cancun The Telcel company is located in the Hotel Zone # 2 Blvd Kukulcan Km 12.5 77500 Cancún, Quintana Roo, Mexico.
Telcel is the best for 4g and internet service.
Mexico cellphone company's
http://www.telcel.com/portal/home.doTelcel: Excellent coverage, You'll have to present your passport. It took no time set up the data service. (You need to know their APN settings for data service I will cover this below. I used The Vonage app to Talk to friends and family in the U.S for free they were able to call and text me while using the Vonage app on their smart phone and toll free numbers work with Vonage but not with the Mexico number.(I will cover how to set up Vonage before your travel below). There are other cheaper company's but none with the same coverage as Telcel. It worked everywhere compared to the company below.
http://www.movistar.com.mx/Movistar: The underdog. Cheaper per-month. It is what The other phone used.I wanted to test both networks. The rate to call the USA from Mexico was only 2 pesos per minute (15 cents) but there are other options to call the U.S for free as stated above. Coverage is not great at all, but it wasn't to terrible either. It was really spotty while on the beach unlike Telcel. Traveling out of Cancun on a excursions there was next to none cellular service at all. A lot of the small towns didn't have Movistar coverage. You will end up roaming on a different network it will roam on the Telcel network instead yeah that's right I said Telcel.
Prices
Everyone wants to use their Android phone or iPhone for checking emails, translating Spanish and occasionally consulting Google Maps while lost. It is easy to setup data on your phone once you have a SIM card and money on the account. If you don't explicitly buy data you can still use data on your device, but it will be taken out of your account balance at a very expensive rate. The best thing to do is to sign up for a package deal. Movistar is $200 pesos ($15) for 1GB which expires in 1 month. If your stay is not long Telcel offers the same 1GB data service for 10 days.
To sign up for one of these packages after you have added money to your Movistar account you send a text message to a special number and money is automatically taken from your account balance to pay for your data package. For example, to sign up for 1GB over 30 days, a $200 peso plan, you send a text message to 100 that says "30 dias". $200 pesos will be removed from your Movistar account and you'll have a gig of data to use.
Telcel works in a different way but you don't not need to text any special number( if your purchase from their main Store) after you add money to your account. it is automatically applied only when you use any OXXO convenience store to refill your mobile service then you will need to text a special number which will be provided . I prefer going to Telcel company just in case of a language barrier.
Note: That all Telcel prepaid plans are currently referred to as "Amigo". Click Here for Telcel Rate Rates are in pesos not dollars
Your sim card good and can be reused up too 1 year after money runs out or time expires.
Current Exchange rate $1 USD = 13.2408 pesos.
Step 2
Lets get your internet service running :
After you have your sim and paid for data you need add the APN setting to your phone. I did have to add the APN to my Razr Maxx for 4G/3G coverage, As Same for the iPhone 4S to acquire the 3G data service. Insert your Telcel sim go to the one of the link below, click your phone software link. its free no need to pay a company which will take you minutes to do. If your phone is running any Android you click the android manual setup for Iphone the Iphone manual setup. Here is Telcel APN setting for Cancun, Mexico . Here is Movistar APN settings
Note: If you have a fully unlocked smartphone that is not locked to any specific carrier in the United States, Canada or any other country you may not have to enter the APN setting manually.
How to Call and Text to the U.S and Receive Calls and Text from the U.S while abroad at no Charge.
I have used Vonage for a while to me its the best. I have used on trips to Europe and it has always work without any problems.
When setting up Vonage you must do it before your trip abroad because it will asked for your current U.S number for authorization and activation this number will not change once you use a foreign sim since your account is linked to your U.S number not your carrier.
You can add money to your Vonage account if you are planing on calling land lines or a smartphone with out the Vonage app attached to that smartphone number. (I notice a few times I used Vonage from Mexico to call a mobile phone that did not have Vonage, I was able to call them for free, which was a bonus). You can Call, send SMS and MMS threw Vonage at no additional charge to any smartphone with the Vonage app.
There are other apps out there that do work the same way as Vonage. Viber, Call and Text any Viber user for free. Whatsapp a texting app only no calling is available (yet).
These apps will use the data service you have purchase while abroad or if you have WiFi enable on your phone if WiFi is available they will use the WiFi Data instead of Cellular Data. Almost every Hotel in Cancun makes you pay for WiFi. If you are at a hotel that offers free WiFi you are in luck but the service may be spotty in some areas in your hotel.
Note to reader: The Hotspot for Verizon Wireless did not work it will look for Verizon servers. I will update this article when I find a Hotspot for Telcel. I also know The Foxfi app did not work either even the paid version.
Thanks for reading !!
Enjoy your trip.

How to turn your computer into a Virtual (Personal)Router.
Our hotel the Grand Oasis Cancun provided internet for only 36 hours and you could only use it on one device which comes to my next option as using your Laptop as a Personal Router to broadcast WiFi to any devices near your computer. Our room was on the Second level of the Pyramid at Grand Oasis and I was able to access it while at the VIP lounge below our room. Before our supposedly free internet service ended.
I attempted using the hotel next door since I was getting a good signal from the Omni Hotel. They offered complimentary 24hr internet access using your browser as a way to track your use. Once you find the signal of the Omni it will open your browser I used Google Chrome, after it opens you go threw a few simple steps and your ready.
I learned that after the 24 hours are up all you have to do is disconnect from their network, just run Ccleaner(free program) then find the Signal of the hotel and you will be given another 24 hours. What Ccleaner(<--download there) does is clears anything attached to your browser ie cookies temp files etc. it cleans your browser history giving you a way of not paying for the hotel fee of internet and giving you free WiFi. this is only if you are next to the Omni hotel :).
What you need to download to turn your computer into a hotspot need to say is this little easy to use program Virtual Router. Once it has download test at your home to make sure it works with you devices. This will work with Tablets, Phones and other computers that cant find the Omni WiFi signal. Your welcome. To use it, is simple. Open program>make a password>select WiFi and start VR.

Similar Messages

  • Is Droid Mini a global ready phone?

    I'm planning a trip to Canada. I'm receiving conflicting information from Verizon on whether my Droid Mini is global ready or not. The International Trip Planner tells me You can use the DROID Mini 4G LTE Black to voice, text and data in all selected countries. Wireless Coverage in Canada and Mexico will be improved using a Global-Ready device. If you're upgrading, we recommend 4G LTE Global-Ready device. When I log in to My Verizon and navigate to My Global Device & Services, I am not able to select any global service for my Droid Mini, and I see the message This phone is designed to run on the network technology available in the US and more than 25 other countries (primarily in North America, the Carribean and some Asian countries). It's not designed to roam in the majority of international countries. The paperwork and manuals that I received with my Droid Mini indicate that the Droid Mini is a global ready phone that can be used in more than 200 countries.
    So, is the Droid Mini a global ready phone, and will I be able to roam on GSM networks in Canada with 3G data service, rather than 2G?

        mrmike123,
    A trip to Canada sounds very fun! No worries with your phone - Canada uses the same technology we use here in the USA, which is called CDMA, and your phone absolutely supports it. In addition to that, many other countries support a technology called GSM, and your phone is able to connect to that as well. If you refer to the specs listed for your phone you will see both CDMA and GSM band frequencies listed under the Network section. Canada has started utilizing some GSM technology, and that may be where the confusion is coming in to play, but either way your phone will be able to be used while traveling.
    Your line may need to have a free feature called International Dialing added to it before your trip so you can use your phone outside of the country. Please give us a call at 1-800-922-0204 and we'll make sure you've got it!
    SarahO_VZW
    Follow us on Twitter @VZWSupport

  • How To Use Your Own Router with Out Loosing Verizon's FIOS Services

    How to use your own router with Verizon’s FIOS Service
    First, you need a basic understanding of how FIOS works but unfortunately there are two types of FIOS systems out there. All of the systems utilize a fiber optic cable to bring TV, phone and internet to your location over one optic cable. In addition these systems provide interactivity including widgets, remote DVR, movies on demand and so forth via an IP (Internet Protocol) signal.  Your STB (Set Tip Box) requires both a video and IP signal. The IP signal is necessary for all of the aforementioned interactivity.  The fiber cable terminates at the Optical Network Terminal or ONT for short.  The ONT converts the optics into a digital signal that can be utilized by ones equipment.  From the ONT your video, phone and internet are provided to the location.  This is where things can differ as the internet signal can be provided via a coaxial (MoCA or Multimedia over Coax Alliance) or RJ45 Cat5 (Ethernet) cable.  It is important to identify and understand the differences of these two setups.  In my case I have my internet entering via Ethernet cable, which in my humble opinion makes things a heck of a lot easier.
    How does one tell the difference? In most cases it’s rather simple; just look at the Verizon’s router WAN (Wide Area Network) Port.  Does it have a RJ45 (Ethernet) or Coax (TV cable Cord) going to it? If the router’s WAN port doesn’t have a coaxial connector then one will need to convert the MoCA signal into a usable Ethernet signal that routers understand. The easiest way is to use Verizon’s router as a bridge. In this method the Verizon’s router simply converts the signal and passes it along to your own router. The challenge is to try to maintain the interactivity that FIOS TV provides. Because of this one needs to supply the IP routed signal back to the FIOS router.  There are multiple methods for doing this and I would recommend investigates which one make the most sense.   
    In my particular case the IP signal was provided by Ethernet.  Again there are various ways of installing one’s own router. The hardest is to utilize Verizon’s router as a bridge.  This setup requires configuring Verizon’s router as a bridge and also creating a VLAN (Virtual Local Area Networks). In addition one needs to set up their own router so it will work with the various routing tables and networks. For me this is too complex for the average person and it can be difficult to trouble shoot if something goes wrong. Please consider that Verizon will not support utilizing third party routers.   
    The easier method is to request an Ethernet signal (if you don’t already have one) from their ONT.  I would highly recommend getting your hands on a NIM or Network Interface Module. This device is used to convert Ethernet to Coaxial so it can be fed back to your STBs.  These can be purchased online and Verizon technicians can be a valuable resource with these sorts of acquisition.  At the very least they can point you to the right direction.  Once you have a NIM the rest is rather simple.
    Log into the current Verizon Router.
    Located the router’s MAC address and copy it down.
    Go to the port forwarding section and copy down the Applied Rules. 
    Example:  
    Network Computer/Device: 192.168.1.100:63145
    Application & Ports Forward:  Application UDP Any -> 6347  
    Note: There may be up to three entries for each one of your Set Top Boxes.
    Look at your current device list, typically found on the home screen. Copy down your STB MAC and IP address.
    Example:
    IP-STB1
    Connection Type: Ethernet
    * IP Address: 192.168.1.100
    IP Address Allocation: DHCP
    *MAC Address:                07:73:fFe:ad:8b:3f
    * Things you will need to write down
    Go to the network section and look for the main Ethernet connection.  Select this and then select more setting, typically found at the bottom. Release the current lease.
    Remove the Verizon router
    Install your router
    Connect the NIM by plugging in an Ethernet from one of the routers LAN (Local Area Network) ports to your NIM. Then connect the coax cable, the same cable that was used by Verizon router.
    Set you DHCP routing IP pool to accommodate Verizon’s STB IP’s  (note their IP’s start at 192.168.1.100)
    Go to DHCP section and reserve the STB IP’s by inserting the IP’s and MAC addresses. This shall ensure that nothing else utilizes the same IPs as the STBs thereby preventing IP address conflict.  
    Add the port forwards from Step 5 above.
    Clone Verizon’s Mac Address utilizing the info from step 2
    Finish setting up the router in typical fashion.
    Unplug and re-plugin your STB’s and test functionality.  It’s best to try using a widget or Movie on demand function.
    Note: if the new router can net get an internet signal contact Verizon’s support and have them release the IP and reset the ONT.  
    EVERYTHING should be working at this point.

     3 Go to the port forwarding section and copy down the Applied Rules. 
    Example:  
    Network Computer/Device: 192.168.1.100:63145
    Application & Ports Forward:  Application UDP Any -> 6347  
    Note: There may be up to three entries for each one of your Set Top Boxes.G
    Your display obviously is not like mine as mine does not dosplay the port associated with the ip address
    whatever, the STB's start at 192.168.1.100 and icement by 1 for each
    the port addr's will be 63145 alo incrementing by 1
    there is 1 entry for each in my pf list
    however each ip addr also has a port entry starting at 35000 also incrementing by 1 for each ip addr
    For some unknow reason these are duplicated e.g I appear to have 11 entries exaactly the same for each stb and as the fios services rules have no action switc there is nowhere to delete the extraneous garbage.
    Why do you clone the mac addr??

  • Manage how to use wireless internet to phone E71

    Sorry, but I have a wireless D-link machine at home.I actually want to know how to use internet on my phone .
    Thank you

    Hi aladdin22
    Have a look at this post:/discussions/board/message?board.id=smartphones&message.id=83014#M83014
    Don't use CD version of PC Suite but latest from here:http://europe.nokia.com/pcsuite
    Lastly make sure that your E71 is in "PC Suite" mode NOT "Data Transfer" mode, go to Menu > Connectivity > USB > USB connection mode. 
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • I am a high school teacher.  My district purchased the entire CC Suite.  Where can I find a tutorial in book form to learn how to use your products?  Do you all provide free book samples to teachers?

    I am a high school teacher.  My district purchased the entire CC Suite.  Where can I find a tutorial in book form to learn how to use your products?  Do you all provide free book samples to teachers?

    Good day!
    This is a user to user Forum, so you are not really addressing Adobe here, even though some Adobe employees thankfully have been dropping by. (edit: Actually they are more likely to frequent the regular Photoshop Forum.)
    Regards,
    Pfaffenbichler

  • Anyone know how to get your landline home phone to ring when your cell phone rings...I have no cell service in my house!

    Anyone know how to get your landline home phone to ring when your cell phone rings...I have no cell service in my house!

    When you are on your way home, you can forward your calls to your home phone. Cancel forwarding when you get to an area with service.
    *72-xxx-xxx-xxxx with the x's being your home phone #.
    *73 to cancel.
    You can also do this with Google Voice.

  • You can configure Speed Dial using your Cisco IP Phone

    You can configure Speed Dial using your Cisco IP Phone
    Please check the video: http://youtu.be/ue7gyRj8n9w
    For more information please mail to [email protected]

    I think that eventually these darn things just break - at least that's my experience. Does anyone know of a cool quick fix for a stand that won't stand.  
    Thanks!
    This topic first appeared in the Spiceworks Community

  • How to use a global variable for reading a query resultset in JDBC lookup?

    Hi Friends,
    Using JDBC lookup, I am trying to read from a table Emp1 using a user defined function. In PI 7.0, this function returns values of a single column only even if you fire a " Select * " query. I am planning to use a global variable(array) that stores individual column values of the records returned by a "select *" query. Need pointers on as to how a global variable can be declared and used to acheive the above scenario. Kindly explain with an example. Any help would be appreciated.
    Thanks,
    Amit.

    Hi Amit,
    Sounds like a good idea but then you would need an external db and update the table in a thread safe way !.
    Regarding your question as to how to work with global variable please refer https://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/1352. [original link is broken] [original link is broken] [original link is broken]
    Rgds
    joel

  • How i use catalyst to make phone app

    can any one know how i use flash catalyst to make cell phone application like black berry ???

    Are you thinking of targeting the BlackBerry Playbook? You can use Flash Catalyst to prototype up your application for mobile, but the skins that it creates are not optimized for mobile nor are they usable in the Flex Hero mobile components. So Flash Catalyst's output will not be very useful by Flash Builder.
    I would not recommend using Flash Catalyst as part of a production workflow for mobile at this time. You can still use it for prototyping you concept, but you not have any touch/gesture support in any of the components, making the interactions with the prototype a bit limited. Flash Catalyst only targets the desktop version of the Flex framework, so although you can compile the FXP in Flash Builder for a mobile device, you will be running the full desktop version of the Flex Framework and not the mobile-optimized version.
    Hope this answers your question,
    Chris

  • Anybody know how to change your MSDN account phone number?

    The phone number used when my MSDN account was established is no long a valid (non-working) number.  I want to start using the MSDN Azure benefit but to activate it requires it to send you a text or get a call at the phone number on you account.  I've
    search all over my profile and can change my email address, time zone, country, language, yada, yada, yada, but nowhere have I found a way to change the phone number.
    Does anyone know where to go or how to change the MSDN account phone number?
    Eternally grateful,
    Frustrated in Phoenix
     

    Pretty sure what you're looking for F-I-Ph is at https://account.microsoft.com.  I see a "phones" tab on my version of that page. 
    Thanks,
    Mike
    MSDN and TechNet Subscriptions Support
    Did Microsoft call you out of the blue about your computer?
    No, they didn't.

  • How to use your credit to buy music

    Hello Everyone,
    this is more than the answer to a question I had and unsuccessfully finding answers that did not resolve my problem. I made a couple of comments one some of those answers basically complaining as how poor Apple Support was by leaving customers fend by themselves after they charge so much for their products.
    Anyway, this note is to provide with the answer to the problem I had. I don't know if it will solve anyone else's but here you go...
    I had a $100 gift card that I had redeemed sometimeback and never used. Today, it occurred to me that I wanted to buy some music for the 2014 year end festivities, so I searched for the music library and lo and behold, I found an album I wanted to purchase. At first, and forgive me if this sounds ridiculously uncomplicated to the Apple literate, I am really not an Apple person (iPhone, iMAC, and the sort included) but I have fair knowledge of computing systems so I thought I could figure the purchase process myself without much hassle. My account showed that I had $100 so that's when I thought I still had that money available. I picked the album and the problem came at the time for payment. I selected none but for funny reason, I didn't realize that I had to select twice for some sort of message to show up just below that I would redeem points. I didn't want to mess with that as I wanted to start the download now but if you want to use your credit instead of a credit card or any other payment there, just click None and I guess you have to make sure the notice appears just below that showing that you will in fact use your points. I just made sure my information was there and proceeded to redeem. It worked.
    This would've been a lot less painful if someone, via a Live chat support could've helped me and saved me precious time I wasted.
    Anyway, bottom line is, if you have credit to redeem, you do not need to enter credit card information
    Thanks and happy iTuning, LOL

    Some tips here:
    http://portablevideo.blogspot.com/2008/05/home-media-upnp-and-dnla.html
    640K Should be enough for everybody
    El_Loco Nokia Video Blog

  • I managed to transfer the music from 1 pc to 1 other pc (to be played by iTunes). Bit didn't fixe the transfer of the meta data (for example the rating). Does anyone know how to use your old playlists, etc..(= meta data) on the other PC? So, please help!

    I managed to transfer the music from 1 pc to 1 other pc (it is played perfectly on the other PC (Windows 7- pc) by the newly downloaded and installed iTunes, version 10.6.1.7). But I didn’t fix the transfer of the meta data (for example the rating). Does anyone know how to use (or import) your old playlists, etc..(= meta data) on the other PC? So, short: how to migrate the meta data from one pc to an other pc?
    It's a pity that it seems not to be possible to import on the new pc e.g. the ratings!!!
    I don't want to start again with rating my (beautiful classical) music!
    Thanks, from Amsterdam, NL

    Did you do the move via Home Sharing, astro?
    If so, perhaps try the instructions from the following post:
    Re: i transfered itunes to my pc playlists did not go

  • Here's how to use your own custom Webclip icons for the sites you visit.

    This method is pretty much 95% taken from this URL: http://allinthehead.com/retro/319/how-to-set-an-apple-touch-icon-for-any-site , so credit where credit is due. The instructions are a bit hard to understand though, so I'll try to make it easier for everyone.
    Fortunately, this works for both Macs and PCs.
    INSTRUCTIONS:
    Requirements:
    - iPhone on 1.1.3 and any version of iTunes that can sync to iPhone
    - Adobe Photoshop or any other image editing program that can crop, alter image size, and save .png image files. (Recommended 24-bit .pngs as they are higher quality)
    - Apple Safari ( http://www.apple.com/safari/, and yes, you need it.)
    - A website or ftp where you can upload images and directly link to them, like Google Pages.
    Warning:
    - This requires you to sync your Safari bookmarks to your iPhone. You will probably lose all of your iPhone's bookmarks if you don't already sync your Safari bookmarks with your iPhone. Only proceed if you do not mind losing your iPhone's current bookmarks and do not mind re-entering them after the bookmark sync. NOTE: The bookmark sync DOES NOT get rid of your current Webclips though, so don't worry about those.
    Easy Steps:
    1) First, make sure that you are following these instructions in the Apple Safari web browser.
    2) Find an image you wish to make into a Webclip icon. (ex: I prefer to use movies.yahoo.com to look at movie showtimes, so I found an image of a movie reel from Google Image Search and decided to use that.)
    3) Open the image with your preferred image editor and crop your desired image into a perfect square. Resize that picture down to 57x57 pixels. Save as a 24-bit .png file. Upload the icon to your webpage or ftp. (ex: I ended up with this icon of a movie reel: http://ctolpin.googlepages.com/appleicon01.png )
    4) Select and copy the javascript code in this .txt file: http://ctolpin.googlepages.com/webclipcode.txt
    5) Go to Bookmarks and select "Add Bookmark..."
    6) Type in "Webclip Icon URL"
    7) Go to Bookmarks again and select "Show all Bookmarks."
    8) Right-click your new "Webclip Icon URL" bookmark and select "Edit Address"
    9) Paste your clipboard's contents into the field.
    10) Plug your iPhone into the computer if it's not connected already.
    11) In iTunes, select your iPhone from the right column. Select the Info tab. Scroll down to "Web Browser" and check "Sync bookmarks with: Safari" (obviously, make sure Safari is selected from the dropdown menu).
    12) Once your iPhone is synced, use your iPhone to navigate to your intended website target to make into a Webclip. Remember that Webclips save where you zoom in as well! (ex: For me, it was movies.yahoo.com and then entering in my zip code.)
    13) Once you've loaded your target website, open up the bookmarks in iPhone's Safari, select Bookmarks Bar, then select Webclip Icon URL.
    14) Type in the address of your uploaded icon. (ex: In my case, it is http://ctolpin.googlepages.com/appleicon01.png)
    15) iPhone's Safari will seem like it didn't do anything. However, add that webpage now to your home screen as a Webclip. Magic.
    Additional note:
    It is easiest to make a bunch of icons at first and to upload them. However, once that "Webclip Icon URL" bookmark is in your iPhone, there is no need to go back and do any of the computer Safari steps again
    My front page icons in order (Sorry Stocks, it's the second page for you!):
    Google, Wikipedia, Definr, Showtimes
    http://ctolpin.googlepages.com/iphonecampics007.jpg
    Message was edited by: LumpOfCole

     3 Go to the port forwarding section and copy down the Applied Rules. 
    Example:  
    Network Computer/Device: 192.168.1.100:63145
    Application & Ports Forward:  Application UDP Any -> 6347  
    Note: There may be up to three entries for each one of your Set Top Boxes.G
    Your display obviously is not like mine as mine does not dosplay the port associated with the ip address
    whatever, the STB's start at 192.168.1.100 and icement by 1 for each
    the port addr's will be 63145 alo incrementing by 1
    there is 1 entry for each in my pf list
    however each ip addr also has a port entry starting at 35000 also incrementing by 1 for each ip addr
    For some unknow reason these are duplicated e.g I appear to have 11 entries exaactly the same for each stb and as the fios services rules have no action switc there is nowhere to delete the extraneous garbage.
    Why do you clone the mac addr??

  • How to use functional global with a large amount of variables?

    Hi all,
    I'm currently developping a LV program which control and acquired data from a device. Up to now I used global variables ( very conveniente to use for experimental parameters). But now my program is become to be too large and I have too much "global" variables to continue to use a global.vi.
    I'm wondering if functional global can help me. If someone has an exemple of how use functional global with a large amount of variables...
    thanks

    I agree with Ben.
    Using queues is better than a number of Globals or Action Engines (Functional Globals).  If you need to pass data to a sub-vi, you can simply wire the queue out to a queue control of a sub-vi, or a reference.  See attached example of passing data to a sub-vi using a queue.  The example is an extremely simple, undocumented tid-bit of code that sends the loop count to the consumer VI.
    Run the main program called QueueProducer.vi.
    R
    Attachments:
    QueueProducer.vi ‏18 KB
    QueueConsumer.vi ‏14 KB

  • How to use messages to android phones

    how to use messages to other android phones

    To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
    How to Send SMS from iPad
    http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
     Cheers, Tom

Maybe you are looking for