How to use Z10 as Wifi USB Adapter (NOT internet tethering)

Hi,
I would like to know if there is a way to use my Z10 as a USB dongle to receive wifi signal from my router.
I tried to disable the Data Service first and hoping it will let me choose my home wifi, but it did not work. It always asks to turn on the Data Service then to do a normal Internet Tethering (through my 4G).
I know some Android phones can do this, but I couldn't find an app or how to do this on my Z10 yet.
Could anyone advise?
Thanks.

chuugokujin wrote:
No...as my title indicated it's not internet tethering through the mobile network (4G) but receiving signals from home router wifi. Think it as a wireless USB dongle/adapter...
If you have the WiFi turned ON on your Z10 and the z10 is connected to your laptop, then the laptop will have access to the internet via Z10 WiFi connection. Yes, the laptop will receive the signals from your WiFi router thru your Z10.
If you turn OFF WiFi on your Z10, then your laptop will have access to the internet via your data connection provided by your network.

Similar Messages

How do I get MacBook Pro to use Alpha Network wifi usb adapter?

Using OS X. Alpha Network usb wifi adapter using Ralink wireless utility. Network utility says it is connected as 802.11 n WLAN. But my browsers (Safari and Firefox) do not use the adapter to connect to the internet. How do I turn off the internal wifi card and get the OS to recognize the usb adapter?

you have to have the right drivers for your usb data stick.....check the website of the manufacturer for drivers.
to disable your wifi, click on the wifi icon and select, turn wifi off.
good luck..

How to use 45W MagSafe 2 Power Adapter with cable management MagSafe 2 power port macbook air 2013

How to use 45W MagSafe 2 Power Adapter with cable management MagSafe 2 power port macbook air 2013 there's two plugs do I use both for the safety to work or I just one ? Thanks sorry new macbook air 2013 was given to my daughter fir her 18th bday 2 days ago by my brother

No, the one is just an extension cord, just use the 45W charger with its attached thin cord and connect the magnetic magsafe to to the connector on the back left of the macbook Air for use and charging it

How to get an N wireless USB adapter to transfer data faster that 54 Mbps

How to get an N wireless USB adapter to transfer data faster that 54 Mbps? I am running FIOS 10/2 and connected to a ActionTec M1424WR router. Any help will be appreciated.

I have to ask the question, why are you in need of 802.11N speeds? Are you transferring lots of files between other PC's on your network or are you simply connecting to the Internet.
Remember if your Internet speed is 10/2 which means 10 meg down and 2 meg up having 300 meg capability WLAN connection will not be noticeable. Your bottleneck is your Internet connection of 10/2.

HT5457 How to use facetime without wifi, I use Iphone 4S

How to use facetime without wifi, I use Iphone 4S

Only if your iPhone is 4S and your carrier supports it.
Read this: http://support.apple.com/kb/TS4400

How to Use Nokia N81 Wifi Facility as a Wireless N...

Hai everybody,
Can anybody help me "How to Use Nokia N81 Wifi Facility as a Wireless Network Card for the PC using PC Suite"
Thanks
Solved!
Go to Solution.

Are you wanting to use the N81 to connect to a wireless router then to pass on it's internet connection to your PC?
If so that isn't possible.
You will need to buy a wi-fi adaptor for your PC and connect directly to the wireless router. They don't cost much now, less than £10.

I have no idea how to use Firefox. I used to have Internet Explorer 7 but am unable to connect to it anymore. How do I use Firefox? I know how to use a computer, somewhat, but am not as savy as I'd like to be. I will appreciate your help.

I have no idea how to use Firefox. I used to have Internet Explorer 7 but am unable to connect to it anymore. How do I use Firefox? I know how to use a computer, somewhat, but am not as good at it as I'd like to be. I will appreciate your help.

You can look at this post in this MozillaZine forum thread about inspecting a sessionstore file and possibly extract URLs.
*http://forums.mozillazine.org/viewtopic.php?f=38&p=12098147&start=60#p12098147
You can open the Browser Console (Firefox/Tools > Web Developer).
Paste the JavaScript code in the command line and press the Enter key to run the code.
*Toggle the devtools.chrome.enabled pref on the <b>about:config</b> page to true to enable the command line
*https://developer.mozilla.org/Tools/Browser_Console#Browser_Console_command_line

I don't know how to use the canlendars function and the notes are kind of messy code,anyone help me

i don't know how to use the canlendars function and the notes are kind of messy code,anyone help me

Step by step:
1. On your main vi Front Panel, create your boolean indicator.
2. On the block diagram, right click the new boolean indicator and select Create - Reference.
3. On sub-vi front panel, create boolean indicator (or use one that is already created).
4. On sub-vi front panel, create a reference (Controls Palette - Refnum - Control Refnum).
5. Right click on the newly created Refnum and select Select Vi Server Class - Generic - GObject - Control - Boolean. The refnum label changes to BoolRefnum.
6. On sub-vi block diagram, create Property Node (Functions - Application Control - Property Node). Find the BoolRefnum and move it close to the new Property Node.
7. Wire the BoolRefnum to the reference input of the property node.
8.
Right click on the property node and select Change to All Write.
9. Move mouse to point to Visible inside property node box, left click and select Value.
10. Wire the boolean indicator from step 3 to the Value input of the property node.
11. On sub-vi front panel, right click on icon and select Show Connector.
12. Click on empty connector spot then click on the new BoolRefnum. Save your sub-vi.
13. On main vi block diagram, connect refernece created in step 2 to the new connector terminal of sub-vi.
14. Save and run.
Here are the modified vi's.
- tbob
Inventor of the WORM Global
Attachments:
Pass_a_Reference.vi ‏20 KB
GL_Flicker_mod.vi ‏83 KB

How to use Labview drivers for USB-CAN Adapter

Hi,
I just recently started working with CAN and I have a PCAN-USB adapter. I'm trying to create a programme for monitoring a series of CAN based devices and I've found Labview drivers at the link below. However, I'm not really sure how to start. I have the specs for the device but I don't know how to proceed.
Should I create messages and channels and a data base in MAX first? If anyone has programmed with this dongle before please give me a guide how you went about it.
Labview drivers - http://www.labviewportal.eu/en/device-i-o/82-pcan-usb-driver.
Thanks

I have not used this specific CAN adapter, but I have used other CAN adapters from both NI and other companies. The CAN database in MAX is useful only if you are using an NI CAN device. For all other CAN devices you need to use the format that the library uses; most likely that will be raw CAN frames.
If you do want to use the NI-CAN interface on top of the PCAN library, you can use NI-CAN virtual channels 255 and 256. These are internally connected, so that anything you send on one is received on the other. This makes it possible to do translation between raw frames and channels defined in a database, by opening one interface for frames and the other for channels. You read raw frames from the real device and send them to CAN255, then read them on CAN256; for writing, you do the opposite. However, this still requires understanding how to read and write raw frames on the underlying device, so I'd start there.

Stops working when using it with wifi antenna adapter. Good with 3.6 but now that I have 5 I can't find how to change back.

I live on a boat so I use a wifi antenna adapter to get internet. I used mozilla 3.6 until 5 came out and I updated. After that my internet stops more so I called the manufacturer and he said it doesn't work well with Mozilla 5 and I should change back to 3.6. Its not that it stops so much as when it does stop, I need to access the program that can change the source of the internet connection and with 5.0, it won't open the program so I can't use it. I tried to download 3.6 again and can't find it to download. Now I have to use internet explorer which I don't like.

Hi Cynthia,
Welcome to Adobe forum.
In order to install your Photoshop CC you will have to install Creative Cloud app.
To install it please visit below given link and login with your ID:
www.creative.adobe.com
Once logged in on top left corner you will have an option 'Download Center', please click on that and Download an app named Creative Cloud.
Once its downloaded please install it and open it, once it is opened please go to 'Apps' tab and then you will see all the software's to install.
Please look for Photoshop CC and click on Install infront of it and it will install it.
Once installed please open it and use it.

How to use IXXAT CAN to USB in LabVIEW for CAN read, when I am having VCI V3 driver?

I am having VCI V3 driver for IXXAT CAN to USB.How to use that in LV for reading data from CAN device.

Did you check the settings to make sure that the Password Manager is enabled?
*Tools > Options > Security: Passwords: "Remember passwords for sites"
Make sure that you do not run Firefox in (permanent) Private Browsing mode.
*https://support.mozilla.org/kb/Private+Browsing
*Tools > Options > Privacy: Use custom settings for history
*Deselect: [ ] "Always use private browsing mode"
See also:
*http://kb.mozillazine.org/User_name_and_password_not_remembered
*http://kb.mozillazine.org/signon.autofillForms

How to use Terminal with KeySpan USB serial adaptor cable?

I own a KeySpan model USA-19HS to use with our MacBookPro when working on clients networking equipment that require serial communication. I have used ZTerm with excellent luck, but it costs, and is yet another application that I dont really want. I would like to know if any one out there has exacing instructions on how to use Terminal with this adaptor. If I could write a file that had, say, the couple most common settings (9600-8-n-1, 57600-8-n-1, et cetera) that I could simply click on, to open a new Terminal window with those settings, then simply close that, and open a new window (apple+n) in order to get back to a default settings terminal window. All feedback is most appreciated.
Thanks so much, Jason Sjobeck

Hi, Jason. Welcome to the Discussions.
You wrote: "All feedback is most appreciated."OK.
1. Have you considered discussing this with Keyspan Support?
2. Have you read the section "OSX has Terminal.app - why do I need ZTerm?" on the ZTerm Home Page? That seems to explain why one needs an app like ZTerm.
3. A quick search of Keyspan's FAQ for your product and terminal doesn't yield much more than how to find the serial ports using Terminal.
Likewise, this Google search also yields little, and variants of that search of such weren't particularly help either.
It appears your inquiry seems to be a somewhat esoteric topic.
4. Apparently, ZTerm X is a bit long in the tooth and there's no Universal Binary for it. It sounds, however, like you've tried it running on your MBP under Rosetta, yes?
5. In researching alternatives to ZTerm for you, I note the followng:• The comment from "Reverb" on this page suggests C-Kermit or Kermit as a free alternative.
• This tip on Mac OS X Hints cites Minicom as another option.6. You may want to try your question on the Unix Discussion.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X

How to use thunderbolt to gigabit ethernet adapter

hi mates. i just purchase the Thunderbolt to Gigabit Ethernet Adapter last week for my Mac Book Pro Retina. but i have no idea how it work. i tried just plug in the adapter and the LAN cable in but no luck...
Any idea how it works?

Plug in the Adapter and the cable to the adapter and the other end of the cable to a switch or router then Reboot the system. Then check the Network section in System Preferences to see if the Ethernet shows up. If it does your done. If not then you have a bad adapter, a bad cable, both bad adapter and cable or the Thunderbolt port is bad.
Or at the last a corrupted install of OS X.

How to use 3110 as a usb modem in Mac

I use 3110 as a usb modem in my Mac,but it can't work,the Mac can find two usb modem when I plug my 3110,each can't work,I see the log find my modem no responses for the AT command,so it can't work,my phone is good,beacuse I can use it in Windows as usb modem, and I also can use bluetooth modem in Mac,after modify isyn ,I can use isyn when i use bluetooth but can't work when i use usb cable,and I hope i can use usb modem ,is anybody use 3110 as usb modem?thank's your help!

Hi,
Listed below is the step by step intructions to configure the Nokia device as a modem to a mac.
Steps:
Connecting your Mac to the internet is convenient and easy with your a compatible Nokia S60 device. You'll need a Nokia S60 device that supports a 2G or 3G data connection (such as GPRS or HSDPA), a compatible Mac (with the latest OS X), a USB cable for your Nokia device or a Bluetooth-enabled Mac, and a network subscription with your mobile service provider.
To set up your device you'll need to know your operator's Access Point Name (APN) and have the packet data service enabled. For help with this please contact your operator.
In Settings select and open Connection >Select and open Packet data > Select and open Access point >Type in your operator's Access Point Name
Exit Settings. Your device is now ready to be used as a modem for your Mac!
Bluetooth Connection: Pairing between Mac and Device using bluetooth, follow the instruction from here: http://europe.nokia.com/get-support-and-software/download-software/device-as-a-modem/connect-to-your...
Note: Preferred mode is USB as it much faster than Bluetooth.
Connect the device and then go to System preferences- >Network- >Select Device (Nokia XXX)
Click on Advanced Tab > Modem tab
- Vendor : Nokia
-Model:GPRS (GSM/3G)
-Telephone Number: *99***1# (contact your operator to get this settings)
-APN: airtelgprs.com (contact your operator to get this settings)
CID: 1
Once connected it will be highlighted in green.
Hopefully this helps.
Cheers
Sandy
Message Edited by sandy2410 on 30-Mar-2009 04:52 AM
Helpful information, then dont forget to hit the kudos star :-) Or say it accepted solution and thanks

How to use : bind character in DB adapter Select Query SOA11g. Getting Error code :17003 .java.sql.SQLException: Invalid column index error

Hi All,
The Actual query to perform is below.
SELECT name,number from emp WHERE CASE WHEN :1='T' AND term_date IS Not NULL THEN 1 WHEN :1='A' AND term_date IS NULL THEN 1 WHEN :1='ALL' THEN 1 ELSE 1 END = 1;
I have tried in DB adapter like below as a parameter for :1 as #vInputParam
SELECT name,number from emp WHERE CASE WHEN #vInputParam='T' AND term_date IS Not NULL THEN 1 WHEN #vInputParam='A' AND term_date IS NULL THEN 1 WHEN #vInputParam='ALL' THEN 1 ELSE 1 END = 1;
Getting Error code :17003 .java.sql.SQLException: Invalid column index error.
Please suggest me on using ':' bind character in DB adapter Select Query SOA11g.
Can someone help me on this please?
Thanks,
Hari

Hi,
Could you please make sure your binding style(Oracle Positional,Oracle named..etc) of the Seeded VO and Custom Vo are same.
This is the option you will get when you are extending your vo. So make sure that both are same.
You can refer the below link too
VO extension leads to "Invalid column index" exception
Thanks
Bharat

How to use Z10 as Wifi USB Adapter (NOT internet tethering)

Similar Messages

Maybe you are looking for