How to user labview with rfid reader/writer

i am trying to connect labvie 2010 to my rfid reader/writer, here is the site for spec of the readers: http://www.gaorfid.com/index.php?main_page=product_info&cPath=97&products_id=615
Can anyone help with instructions on how to interact the two.
Any help would be appreciated

Duplicate post please refer to:
http://forums.ni.com/t5/Instrument-Control-GPIB-Serial/How-to-make-labview-to-receive-information-fr...
Thanks!
Chris T.
Applications Engineer
National Instruments

Similar Messages

Choice of RFID reader/writer compatible with a PDA and LabView

Hello All,
I need information on a RFID reader/writer that i can use with a PDA. The ones i have being coming across don't have a LabView driver except Phidget product. But Phidget uses USB. I need a RFID module with a compact flash. Pls reply.
Demmy

Hi Junaid,
In one of my AII presentations I found:
Tested readers:
Intermec, Alien, Matrics, Philipps, AWID, Tyco Sensematic
maybe you can call those companies and just ask or e-mail them?
also this may help you:
Simple SAP Device Controller with limited functionality is provided. It supports readers:
- Alien ALR-9780 (4-port reader)
- Intermec IntelliTag 500 API
- Philips SDK reader
But I'm not sure how occurate this presentation is because I got it in 2004 (december as far as I remember)
BTW
If they answer please post their suggestions here if you may:)
Regards,
michal

How a administrator user is different from read-write user in Aruba Central?

Q: How a administrator user is different from read-write user in Aruba Central?
A: Aruba Central allows administrator to create multiple user of different access levels to help manage the system. This access levels include:
read only
read/write
guest operator
NOTE: These access levels can be imposed on a specific "ap group" or a set of "ap groups" or all of them.
Therefore looking at the roles, many of the aruba central customers, had a question of how a administrator user is different from read-write user.
Administrator is the only user who can move access points between groups. Read/Write user Do Not Have Permission to execute this action.

Hi,
I've managed to get what I needed by using a shift register + event structure as suggested by Adnan. However, I face another problem after implementing SR+event. I've attached two files, first the original program and second the updated program using SR + event. (it's only the jpg file as I've forgotten to save the labview program, will upload the program by tomorrow.
In the original program, I have an elapsed time that is able to run continuously when I run the program. In the updated program, my elapsed time don't seem to run continuously when I run the program (as shown by elapsed time indicator). I need the elapsed time to run continuously as a input to calculate my motor profile.
I suppose this is caused by the introduction of the event structure, will adding a case structure to wrap the event structure solve the problem or is there another way to get pass this. Appreciate if someone could drop me a pointer or two.
Thanks
Attachments:
Mar 16 - continuous elapsed time.png ‏12 KB
Mar 16 - elapsed time not continuous after introducing shift register + event structure.png ‏17 KB

I have connect a seagate HDD formated on NTFS to my macbook pro with Mac OS 10.7 but my HDD is read only any idea how can i change it to read & write ?

i have connect a seagate HDD formated on NTFS to my macbook pro with Mac OS 10.7 but my HDD is read only
any idea how can i change it to read & write ?

i tried the trial version of tuxera and it gives me the possibility to read & write , Thanx fschweig.
@ Samberl : what is the benifts of keeping my drives on mac format and this SW mediafour i install on my PC to let it write the mac formated HDD ?
is it free ?
all the best
Adiab

How to run duplicate fields with different read/write capability

Hello,
I'm trying to figure out how to have 2 identical fields but with different read / write capabilities. For example:
I have a document that has a policy number in textfield1 in the application. I also have a page footer textfield2 that is identically named as textfield1. I want the customer to be able to enter their policy number in textfield1, but then i want textfield2 to show that same information but remain locked and read-only.
How can I best accomplish this?
Thanks,
Ryan.

Hi,
This doesn't seem to work.
My field names are policy_number and policy_number2.
I have entered this script into the field validation for policy_number2.
event.value = this.getField("policy_number").value;
It's showing blank in the policy_number2 field.
Ryan.

How do is get back to Read & Write permissions on HDs ?

Hi gang,
I was trying to set up one central folder for 4 iTune users (accounts) in our household.
One of the blogs said put in "Shared" folder and set permissions to "Read & Write". I tried but on "Everybody" is does not offer the "R&W" option, just "Read". They also said to be sure you clicked "Apply to Enclosed Items" in the drop down. Although I could not set "Everyone" to "R&W", I clicked on "Apply to Enclosed Items" and the hard drives clicked for at least 15 minutes.
Afterward I got a pop up that said...   System Extension "/System/Library/Extension/ACard6280ATA.kext" was installed improperly and can be used. Try reinstalling. and an OK button to click. I clicked OK and at least 100 more popup appeared, one after the other as I clicked OK.   They all had the same basic message except the info after /System/Library/Extension/, it kept changing slightly on each new popup.
The big problem is I now have three of my four internal hard drives locked to my access and all they say custom on the permissions Privilege window.   Only my main HD is working, thank God.
How do I get back to Read & Write on Privileges, and on all Hard Drives?
Thanks for any help, I just made the move to MAC but have good background with windows operating system.
Gary

Thanks for all the reply's, I really appreciate your time. I have Apple Care so I worked with Apple tech last night and today, but they had to pass problem on to their engineers. They did a great job trying to help and spent 2 hours helping me input in code through the Terminal screen. It helped a little, but we still can access drive 2, 3 and 4 due to the global permissions that were changed.   All in all, it looks like we have to reinstall the OS on a washed HD.
I found out that the Repair program (Disk Utilities) only repairs permissions that were created after the initial set up. It won't correct original setting and that's what happened when I clicked on "Apply to Enclosed Items" at the root level. Likewise Time machine does not clone the main operating system so a restore would probably not get all the pieces back in their proper places.
I was thinking of doing a reinstall of the whole Mac HD drive (boot drive) with an exact copy I made with Carbon Cloner a month back, but the techs seem to think they will have to work on of the 4 individual HD I have.
Thanks again for the quick responses, I will let you know what happens in a few days.
Gary

How to use labview with the handyboard

Hi,
how to use labview with the handyboard
Thx...

I'm assuming you're talking about this, since you didn't provide a link for those of us who don't know what you're talking about.
As the other poster said, you didn't say how you want to use LabVIEW with it. If you want to write LabVIEW programs than run on the microprocessor, then you're out of luck. If you want LabVIEW to interact with it, then you've got a couple of options, SPI probably being the best, but it also has DI and AI that you could use to communicate with it - the DI's could be used as a parallel interface.
Message Edited by Matthew Kelton on 12-17-2007 02:21 PM

How to use labview with gpib to connect with Agilent PNA E8362B ?

how to use labview with gpib to connect with Agilent PNA E8362B ?i am newbie ..just started to work on labview about a fortnite bck and +i am a novice in interfacing(networking... jst know tidbits) skill ..so plzzzzz explain me in a litle detail

Duplicate Post.

How do I erase a CD read/write disc on my macbook so I can add new data

help!
How do I erase a CD read/write disc on my macbook so I can add new data. If a disc is a RW, I shouldn't i be able to write to it after it already has some data on it?
I get a screen note saying I can't add anything because something is already on the disc... but it's only one little 3 meg file. But apple i info. shows no room on the cd.
How can I erase the cd and reuse it? I find no erase command and when I try to drag the file to the trash, i get another note saying i don't have permission... even tho I've check off the permission box.
sheesh.

Open Disk Utility, choose the CD on the left side and click "Erase" on the right.
Matt

How to use labview with gpib to connect with Agilent PNA E8362B ?i am newbie ..just started to work on labview about a fortnite bck and a novice in interfacing skill ..so plzzzzz explain me in a litle detail

how to use labview with gpib to connect with Agilent PNA E8362B ?i am newbie ..just started to work on labview about a fortnite bck and +i am a novice in interfacing(networking... jst know tidbits) skill ..so plzzzzz explain me in a litle detail

Sir
We were able to solve that problem...but now could you advice as to which DC power supply we should use (preferably avalable in India) so that it can be controlled by Labview (through a gpib/rs232/any other port) to give a square wave of desired frequency/other parameters.
Regards
Shivam

Finding exception with the read-write-backing-map-scheme configuration.

Finding exception with the <read-write-backing-map-scheme> configuration, that is setup against a simple database cache store implementation. The class SimpleCacheEventStoreImpl implements CacheStore interface.
Exception in thread "main" java.lang.UnsupportedOperationException: configureCache: read-write-backing-map-scheme
 at com.tangosol.net.DefaultConfigurableCacheFactory.configureCache(DefaultConfigurableCacheFactory.java:995)
 at com.tangosol.net.DefaultConfigurableCacheFactory.ensureCache(DefaultConfigurableCacheFactory.java:277)
 at com.tangosol.net.CacheFactory.getCache(CacheFactory.java:689)
 at com.tangosol.net.CacheFactory.getCache(CacheFactory.java:667)
 at Sample.SimpleEventStoreConsumer.main(SimpleEventStoreConsumer.java:10)
The cache store is interfaced to the program SimpleEventStoreConsumer(where I have a put and get operation) through the following cache configuration descriptor. On running the SimpleEventStoreConsumer, the exception happens on trying to get the Named cache from the cache factory
<cache-config>
 <caching-scheme-mapping>
 <cache-mapping>
 <cache-name>Evt*</cache-name>
 <scheme-name>SampleDatabaseScheme</scheme-name>
 </cache-mapping>
 </caching-scheme-mapping>
 <caching-schemes>
 <read-write-backing-map-scheme>
 <scheme-name>SampleDatabaseScheme</scheme-name>
 <internal-cache-scheme>
 <local-scheme>
 <scheme-ref>SampleMemoryScheme</scheme-ref>
 </local-scheme>
 </internal-cache-scheme>
 <cachestore-scheme>
 <class-scheme>
 <class-name>com.emc.srm.cachestore.SimpleCacheEventStoreImpl</class-name>
 <init-params>
 <init-param>
 <param-type>java.lang.String</param-type>
 <param-value>{cache-name}</param-value>
 </init-param>
 </init-params>
 </class-scheme>
 </cachestore-scheme>
 </read-write-backing-map-scheme>
 <local-scheme>
 <scheme-name>SampleMemoryScheme</scheme-name>
 </local-scheme>
 </caching-schemes>
</cache-config>

you are missing <backing-map-scheme>. Do like following:
<caching-schemes>
 <distributed-scheme>
 <scheme-name>distributed-scheme</scheme-name>
 <service-name>DistributedQueryCache</service-name>
 <backing-map-scheme>
 <read-write-backing-map-scheme>
 <scheme-ref>rw-bm</scheme-ref>
 </read-write-backing-map-scheme>
 </backing-map-scheme>
<autostart>true</autostart>
 </distributed-scheme>
 <read-write-backing-map-scheme>
 <scheme-name>rw-bm</scheme-name>
<internal-cache-scheme>
 <local-scheme>
 </local-scheme>
 </internal-cache-scheme>
 </read-write-backing-map-scheme>
</caching-schemes>

How come I (the Admiistrator) can Read & Write the majority of my Pages archives but not write on random paragraphs?

BLS' iMac 3.60GHz Intel Mac - OS X 10.6.7 - Pages 4.0.5…
How come I (the Admiistrator) can Read & Write the majority of my Pages archives but not write on random paragraphs?

So what happens when you try to edit this information?
For example:
You have a document...
klasdfl;kasdfl;kjasd;lfkja;slkfja;sldkfj;alskdjf;laksdjfl;kj
klasdfl;kasdfl;kjasd;lfkja;slkfja;sldkfj;alskdjf;laksdjfl;kj
klasdfl;kasdfl;kjasd;lfkja;slkfja;sldkfj;alskdjf;laksdjfl;kj
klasdfl;kasdfl;kjasd;lfkja;slkfja;sldkfj;alskdjf;laksdjfl;kj
jkjklioiouijo32904213904902349023904902390902390
jkjklioiouijo32904213904902349023904902390902390
jkjklioiouijo32904213904902349023904902390902390
jkjklioiouijo32904213904902349023904902390902390
Would you be able to highlight the second paragraph? (not in my post obviously)
If so, what happens?

How to highlight text with Adobe Reader XI?

email [email protected]

Thanks. The PDF file was made from a web site article and I guess this is the same as scanned as I cannot highlight. The cursor changes but cannot highlight what I want.
I was able to add text and I did this in Red and will ask the VA to read under the sections marked in Red.
Thanks,
Vernon Pobanz
From: ~graffiti <[email protected]>
To: vernon pobang <[email protected]>
Sent: Tuesday, October 7, 2014 11:57 AM
Subject: How to highlight text with Adobe Reader XI?
How to highlight text with Adobe Reader XI?
created by ~graffiti in Adobe Reader - View the full discussionUse the highlight tool under Comment>Annotations. This will only work if the pdf isn't a scanned image. If that is the case, there is no text to highlight. Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6800192#6800192 Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link. Start a new discussion in Adobe Reader by email or at Adobe Community For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

SCTL-NFC1 is a Near Field Communication(NFC)/Radio Frequency Identification(RFID) Reader and Payment Adaptor designed for iPhone/iPod Touch to provide NFC two-way communication,RFID read/write and contactless payment capabilities.

SCTL-NFC1 is a Near Field Communication(NFC)/Radio Frequency Identification(RFID) Reader and Payment Adaptor designed for iPhone/iPod Touch to provide NFC two-way communication,RFID read/write and contactless payment capabilities.
commercial applications such as asset tracking, document tracking, healthcare, security and access control.

We are the manufactuer of the reader

How can users who have Acrobat Reader only save scanned pdf files so that the text on them is searchable using ctrl-F? I just use the recognize text with ocr feature in the full version of Acrobat and this seem to do the trick. Reader doesn't work!

Our users have scanned pdf files they want to be able to search using ctrl-f. I got them to be searchable by doing a recognize text using ocr with Acrobat Professional vesion 8. They want to know if they can make the files searchable with Acrobat Reader only or if they need the full Acrobat Professional software to make the files searchable.
Thanks for the help!!
Ken K. - 2191

To clarify a bit they need to have Adobe Acrobat, not Adobe Reader. Reader has not been associated with the Acrobat name for 3 or more versions. The process you are asking about is a creation process - the purpose of Acrobat - and NOT a reading feature.

How to user labview with rfid reader/writer

Similar Messages

Maybe you are looking for