How to using a bluetooth

How to using a bluetooth i have to iPhone and i want switch music

Apple does nto support transfer of music, photos and other stuff via bluetooth....
You can find apps on the app store for transfer of files via bluetooth.

Similar Messages

How to use a bluetooth cellphone for audio input and output

Hello, I was wondering how to set-up my Mac Book so that I can use my bluetooth cellphone for audio in and audio out. Ideally, I would like to use my handset for talking on iChat and Skype. Has anyone had any luck doing this? When I bond my cellphone these optiosn do not appear. I know that this is easy to do on a Windows machine but I am not sure about how to do it on my Mac Book.
Thanks!

Yes it should do what you want.
Go to "Audio Midi Setup", and go to the Audio menu and click "Open Aggregate Device Editor". The interface is pretty simple but if you do get stuck, just use the help function in Audio Midi Setup, as it has a step by step guide.
Then when you return to logic, go to the Preferences>Audio>Drivers section and select Aggregate Device as the new driver rather than either the built in sound or the tascam. Then the inputs and outputs will apply to BOTH devices.

How to use the Bluetooth module natively in Parallels Desktop

link to the instructions on how to enable bluetooth natively in parallels:
http://www.mattiouz.com/blog/2007/04/13/how-to-use-the-built-in-mac-bluetooth-in -windows-under-parallels/
link to the .exe that installs the apple driver for the bluetooth module needed in parallels: http://www.mattiouz.com/download/AppleBluetoothInstaller.exe
now my bluetooth is accessible under parallels 3.0.5158. i scanned with a bluetooth netowrk scanner and i had no problems connecting to my treo 650.
i took my some time to find the info but @ last i found it;-)
Message was edited by: smokeonit

Hi,
You canr use text modules in script. You have to use standard texts .
Standard text are maintained in SO10 transaction.
you can create translation text for other languages also . So based on logon language it will print translation text.
go to SO10
give textname it say Ztextname id as ST and language as EN
say create, then you will get editor there maintain your text and save it . then come back . Now change language (say for german DE) say create and eneter translation text and save it.
so now you have created a text called ztextname which you can use in your script.
Inorder to insert the texts in your script do as below
go to any window editor and select path
Insert->texts->symbols->standard symbols
then you will get popup in which you have to mention all the parameters that you have created earlier.
after inserting just change language EN to sy-langu
Reward points if useful
About text elements Sravan already given some informatiomn
Regards,
Nageswar

How to use a bluetooth dongle instead of built-in BT?

Just got an "Ultra Long Range Industrial" bluetooth dongle (BTD Bluetooth Dongle BT-6610). I want to use it instead of the built-in bluetooth because it has a much longer range.
How do I disable the built in bluetooth and enable the BT-6610?
The dongle shows up:
USB Bus:
Host Controller Location:          Built-in USB
Host Controller Driver:          AppleUSBOHCI
PCI Device ID:          0x0aa7
PCI Revision ID:          0x00b1
PCI Vendor ID:          0x10de
Bus Number:          0x06
Bolutek BTD-6610:
Product ID:          0x0001
Vendor ID:          0x0a12 (Cambridge Silicon Radio Ltd.)
Version:          59.41
Speed:          Up to 12 Mb/sec
Manufacturer:          Bolutek Technology Co.,Ltd.
Location ID:          0x06200000
Current Available (mA):          500
Current Required (mA):          200
BRCM2046 Hub:
Product ID:          0x4500
Vendor ID:          0x0a5c (Broadcom Corp.)
Version:           1.00
Speed:          Up to 12 Mb/sec
Manufacturer:          Apple Inc.
Location ID:          0x06100000
Current Available (mA):          500
Current Required (mA):          0
Bluetooth USB Host Controller:
Product ID:          0x8217
Vendor ID:          0x05ac (Apple Inc.)
Version:           1.80
Serial Number:          xxxxxxxxx
Speed:          Up to 12 Mb/sec
Manufacturer:          Apple Inc.
Location ID:          0x06110000
Current Available (mA):          500
Current Required (mA):          0
Here are my bluetooth setting:
Apple Bluetooth Software Version:          2.4.0f1
Hardware Settings:
Address:          xx-xx-xx-xx-xx-xx
Manufacturer:          Cambridge Silicon Radio
Name:          billbarnes
Firmware Version:          5941
Bluetooth Power:          On
Discoverable:          No
Vendor ID:          0
Product ID:          0x1
HCI Version:          4 (0x4)
HCI Revision:          5941 (0x1735)
LMP Version:          4 (0x4)
LMP Subversion:          5941 (0x1735)
Device Type (Major):          Computer
Device Type (Complete):          Macintosh Portable
Composite Class Of Device:          3670284 (0x38010c)
Device Class (Major):          1 (0x1)
Device Class (Minor):          3 (0x3)
Service Class:          448 (0x1c0)
Requires Authentication:          No
Services:
Bluetooth File Transfer:
Folder other devices can browse:          ~/Public
Requires Authentication:          Yes
State:          Enabled
Bluetooth File Exchange:
Folder for accepted items:          ~/Downloads
Requires Authentication:          Yes
When other items are accepted:          Ask
When PIM items are accepted:          Ask
When receiving items:          Prompt for each file
State:          Enabled
Devices (Paired, Favorites, etc)
Manufacturer:          Cambridge Silicon Radio (0x3, 0x10db)
Incoming Serial Ports:
Serial Port 1:
Name:          Bluetooth-PDA-Sync
RFCOMM Channel:          3
Requires Authentication:          No
Outgoing Serial Ports:
Serial Port 1:
Address:
Name:          Bluetooth-Modem
RFCOMM Channel:          0
Requires Authentication:          No

Hi X42:
Your last paragraph intrigued me as I had the same impression:
I thought unlicensed BT devices were legally limited by the FCC to about 30 feet (3 meters)
Actually, 30 feet is 10 meters.
Anyway, I researched and found this as part of a Wikipedia item:
Bluetooth is a standard wire-replacement communications protocol primarily designed for low power consumption, with a short range (power-class-dependent, but effective ranges vary in practice; see table below) based on low-cost transceiver microchips in each device.[7] Because the devices use a radio (broadcast) communications system, they do not have to be in visual line of sight of each other, however a quasi optical wireless path must be viable.[2]
Class
Maximum Permitted Power
Range
(approximate)
mW
dBm
Class 1
100
20
~100 meters
Class 2
2.5
4
~10 meters
Class 3
1
0
~5 meter
The effective range varies due to propagation conditions, material coverage, production sample variations, antenna configurations and battery conditions. In most cases the effective range of class 2 devices is extended if they connect to a class 1 transceiver, compared to a pure class 2 network. This is accomplished by the higher sensitivity and transmission power of Class 1 devices.[8]
Apparently there are BT devices that will transmit about 300 feet. I did look at the FCC site, but quickly became confused in the technbabble.
Barry

How to use Toshiba Bluetooth USB adapter?

I bought a new Toshiba Bluetooth for my laptop but Windows Vista doesn't recognise and is saying that is not compatible. How do I sort this out?
Thank you

Hi
Can you please tell me which USB adapter you try to use? Please send the PAXXXX number.

HT204387 How to use iPad Bluetooth with Samsung devices?

Please advice, why my iPad mini 4g new device dose not appear Bluetooth devices from Samsung? How can I transfer some of my old files from samsung note to my new iPad wirelessly ?

Bluetooth can only be used on iOS devices to connect to speakers, headphones, keyboards and a few other items. It cannot be used to transfer files between different devices. There are other ways to do this. Please describe exactly what you want to accomplish and someone here will be able to help you get it done.

How to use Toshiba Bluetooth stack longer than 30 days on 3rd party computer

Sorry if this is back to basics.
I have a Dell Latitude 610 with Bluetooth built in and driver versions 3.03.
When I try to connect my Nokia via PC Suite it says the drivers are old version and should be 7.0plus.
How do I get updated drivers that last longer than 30 days?

Hi
You should check this Toshiba BT portal and the HowTO section:
http://aps2.toshiba-tro.de/bluetooth/?page=howto
There you can find this document:
http://aps2.toshiba-tro.de/kb0/FAQ81021V0000R01.htm
It says that you have to use the BT stack/driver from your notebook manufacturer!
Cheers

How to use a bluetooth connected speaker for iTunes only

Greetings. I have connected the bluetooth speaker to my mac, and can play itunes on it, but I also hear the computer's beeps and notices through this speaker. This detracts from the musical experience, to say the least. Please help.

Hi X42:
Your last paragraph intrigued me as I had the same impression:
I thought unlicensed BT devices were legally limited by the FCC to about 30 feet (3 meters)
Actually, 30 feet is 10 meters.
Anyway, I researched and found this as part of a Wikipedia item:
Bluetooth is a standard wire-replacement communications protocol primarily designed for low power consumption, with a short range (power-class-dependent, but effective ranges vary in practice; see table below) based on low-cost transceiver microchips in each device.[7] Because the devices use a radio (broadcast) communications system, they do not have to be in visual line of sight of each other, however a quasi optical wireless path must be viable.[2]
Class
Maximum Permitted Power
Range
(approximate)
mW
dBm
Class 1
100
20
~100 meters
Class 2
2.5
4
~10 meters
Class 3
1
0
~5 meter
The effective range varies due to propagation conditions, material coverage, production sample variations, antenna configurations and battery conditions. In most cases the effective range of class 2 devices is extended if they connect to a class 1 transceiver, compared to a pure class 2 network. This is accomplished by the higher sensitivity and transmission power of Class 1 devices.[8]
Apparently there are BT devices that will transmit about 300 feet. I did look at the FCC site, but quickly became confused in the technbabble.
Barry

Activesync doesn't work - How to use Windows bluetooth driver?

Well, I have nearly given up on trying to get the Toshiba Bluetooth stack to work with my QTek PDA Phone. The reason for this is that the stack does not correctly enumerate all the functions of the device and therefore I can't configure the activesync program to use the correct com port.
Frankly, I'm disappointed that Toshiba chose to ship their own ad-hoc bluetooth implementation for Windows when Windows has their own.
So the question I have is, is there a "Correct way" to completely remove the Toshiba provided bluetooth stack (without using the Ghost image I made before installing it) and get a proper Windows bluetooth driver?
As for bluetooth security, the only added security I've seen using the Toshiba stack is that you can't actually make it work with anything so you aren't at risk.
P.S. I've tested with other Windows CE bluetooth devices as well, same problem.

Well I don't like it because it doesn't actually enumerate the serial port devices of my telephone and therefore I can't configure Microsoft ActiveSync to work with it since there is only one com port configured instead of 2.
I need the Microsoft Bluetooth stack so that I can have a standard configuration.
So it's more than just removing the Toshiba stack, it's also about installing the Microsoft stack, or getting the Microsoft stack to recognize the hardware.
Thanks for the info so far, but do you know if it's possible to enable the Microsoft stack?

How To Use External Bluetooth Adapter?

My desk is about 15' from my Mac Mini (running 10.8.2). I'm using an Apple Bluetooth Keyboard and Magic Mouse. The keyboard works pretty well but the mouse is awful. It frequently drops the connection and is erratic most of the time when it is connected. Signal strength is low, varrying between -75 and -84 dBm according to the Connection RSSI graph in System Preferences. In hopes of improving the situation I got a USB extension cable and a USB Bluetooth dongle with the thought that I could find a location for the dongle that would give me better signal strength.
So far, I'm not seeing much – if any – improvement and I'm wondering if I'm actually using the external adapter. Does anybody know of a way to tell which adapter is being used? Of if this strategy will even work?

Hi
Can you please tell me which USB adapter you try to use? Please send the PAXXXX number.

How to use stero bluetooth for ipod in iphone?

I have a Dodge vehicle with Uconnect. Before the 3.0 update my phone was paired with the Uconnect system and anytime I was in the vehicle calls would work bluetooth through the car stero. This still works fine, but I can't figure out how to get the ipod to play through the stero system. If the Uconnect is bluethooth and the phone feature works why not the ipod. Is there something you have to do to have the ipod output go bluetooth? Please help!

some people have reported that connecting and disconnecting a few times might lead it to work. other then that, i don't know. sorry.

How do I use a bluetooth headset with garageband?

How do I use a bluetooth headset with garageband? I can't get it to work after many tries.

I can pair the headphones with the computer but the sound from GB is distorted and muffled. I can barely hear it. The set works with iTunes, but not with GarageBand.

How do you use the bluetooth VIs with a Microsoft Bluetooth Driver?

How do you use the LabVIEW Bluetooth VIs with the Microsoft Bluetooth driver? I have been trying with no such luck.
   I want to use 2 computers to talk to each other using the bluetooth VIs.  Eventually, I think we would like a PDA/phone to talk to a custom built electronics board with Bluetooth. But for now, I would just like 2 computers to talk and then eventually talk to our own device.
One is a desktop w/ the Belkin F8T012 USB adapter. It installs fine with the Belkin driver (but I know I need to use the Microsoft Driver in order to use the LabVIEW VIs, but I have tried to get Windows to install its own but it says it is a BCM92045DG-Flash. It says it cannot install it because it cannot find the necessary hardware. I thought this USB adapter was on the approved Bluetooth devices list? What else should I try? Another Bluetooth USB adapter?
The other computer is a Dell Latitude 820. It has a built in Bluetooth module which I believe is the Dell 350 Bluetooth Module. On this machine I have been able to setup a COM port with a bluetooth device (blood glucose meter). It came with a serial port interface which we modifed to go through a bluetooth interface. It comes up as COM40. We have been able to communicate to it using their program originally designed to talk through a serial port. But we would like to use the Bluetooth VIs in LabVIEW. I can't even use the Discover VI.  Perhaps it is not using the Microsoft Driver as well. Do I just uninstall the driver and then try to have Windows install its own driver? Do you have any other recommendations?
Thanks,
Javi

Hi Javi,
This sounds like an issue with Windows and your specific Bluetooth devices. As you mentioned, the LV Bluetooth VI's do require that the devices use the Windows drivers. Take a look at this link for specific requirements for using Bluetooth with LabVIEW. Also, you can take a look at our Developer Zone tutorial on designing Bluetooth applications a found here. Regarding your device drivers, sometimes it is as easy as uninstalling the driver and then letting Windows discover the device and fine its own driver. You could check out the Microsoft Knowledgebase for more information. Thanks and have a great day!
Stephen S.
National Instruments
1 Test is worth 1000 expert opinions

HT5278 How do I download the operating system ios 5 to my iphone 4s? The ios 6 will not let me use my bluetooth in my car.

How do I download the operating system ios 5 to my iphone 4s. The ios 6 will not let me use my bluetooth in my car.

The only iOS currently available is iOS 6.0.1 (6.0.2 for iPhone 5). Once you upgrade you cannot downgrade. Contact your car maker for help.

How can I use my bluetooth (cell phone earpiece) as a Mic?

I have read in theory it should work? I have a plantronics bluetooth earpiece for my cell phone. How can I set it up as a Mic on the MacMini? in preferences? I want to be able to use it in iMovie.
I was doing a search under Microphones, someone posted : besides isite and imic, one should be able to use a bluetooth set as a Mic.
MacMini core duo Mac OS X (10.4.6) Dell running xp

thanks. Shawk. I figured it out last night when I got home. Works great. Actually like it better than microphone (no wires) and sound is good.

How to using a bluetooth

Similar Messages

Maybe you are looking for