How to validate authenticity of my headphones?

Last week my headphones broke, and movistar say it's not covered by warranty since it hasn't the logo as says on warranty terms: "This Limited Warranty applies only to hardware products manufactured by or for Apple that can be identified by the
“Apple” trademark, trade name, orlogo affixed to them."
Would anybody tell me how could I identify or prove the headphones are original from Apple?
Under the title "EXCLUSIONS AND LIMITATIONS"
http://www.apple.com/legal/warranty/iphone.pdf
Thanks

Then they are taking you for a ride. I haven't seen any copycat Apple earbuds. It is plainly obvious just by looking at Apple's earbuds - even from a distant, they are Apple earbuds.
Is there a movistar retail store nearby that sells Apple earbuds separately? If so, you can hold your earbuds up side by side and ask the store where Apple's logo is located on the new earbuds they sell in their store.

Similar Messages

How to validate user name and password in webdynpro.

Dear All,
Actually i have created login name and password in view, webdynpro and want to validate the user name and password but i am not finding proper code to how to validate user name and password.
Pl do the needful help.
Regards.
Tazeer.
Moderator Message: There is a seperate forum for WebDynpro. Please ask your question there.
Edited by: kishan P on Oct 5, 2010 1:08 PM

Hello, I don´t get you question. User authentication is ready out of the box in webdypro...
Regards Otto

How to validate numbers in char field.

Hello all,
I have one database column with char data type. This field should allow insert only
numbers [ zero to nine] and plus symbol .. how to validate this?
Pls help me..
I.m using oracle 9i database. So it does not allow REG-EXP and WITH methods.. So give some
sql coding to do this

As this forum is for issues with the SQL Developer tool, you'll probably get more answers in the SQL And PL/SQL forum.
Regards,
K.

How to record my voice by headphone on mac mini

Hi all,
How to record my voice by headphone on mac mini. The headphone have a microphone. It can record on window 7, but on mac mini, it's not working.
I don't know why. Please help me.
Thanks.

Open Quicktime Player
File Menu: New Audio Recording....
However... if the headphone/microphone combination has two 3.5mm jack plugs (pink and green) then the microphone output (pink) is "mic.level" - which is TOO QUIET for the audio input on a Mac, which is expecting the much stronger "line.level" signal strength.
Solutions: get a microphone pre-amplifier between the mic and the Mac (not cheap); or a different microphone with a USB interface.

How do I add the external headphones to SystemSetup- Tone?

Inside Systemsetup->Tone I see only one option: integrated sound. I have no other options to select... How do I add the external headphones (supported by the MacBoock) to the selection list?

Hello,
In a Finder Window navigate to your Boot drive->Users->Your User Name, drag the house to the right side of the Dock by Trash.
This is from 10.5.87, but 10.6 should be similar enough...

How to validate the dates in the table control ?

How to validate the dates in the table control ?
Can I write like this ?
LOOP AT it_tab .
CHAIN.
FIELD : it_tab-strtdat,it_tab-enddat.
module date_validation.
ENDCHAIN.
ENDLOOP.
Module Date_validation.
ranges : vdat type sy-datum.
vdat-sign = 'I'.
VDAT-LOW = it_tab-STRTDAT.
VDAT-HIGH = it_tab-ENDDAT.
VDAT-OPTION = 'BT'.
APPEND VDAT.
WHAT CODE I have to write here to validate ?
and If I write like this How can we know which is the current row being add ?
It loops total internal table ..?
Bye,
Muttu.

Hi,
I think there is no need to put chain endchain.
To do validation you have to write module in PAI which does required validations.
Thanks
DARSHAN PATEL

How to fix authentic error in game centre of iPad mini?

How to fix authentic error in game centre of iPad mini?

Following further research, this keyboard lag issue appears to be related to the (botched) iOS 7.1 update. It's good to know I am not the only user who had his iPad mini rendered unusuable by the iOS 7.1 update, however that does not solve my problem.
Anyone out there who has further suggestions (except doing a factory reset via iTunes)?

How to validate material status in physical Inv Doc creation using MI01

Hi Experts,
I would like to know how to validate material status while creating physical inventory document using MI01 transaction.
I tried to figure out a suitable BADI and customer exits ,but it didnt work out well.
Kindly share your thoughts on how this can be achieved.
Regards,
Mohammed Aslam Rasheed

Do you really create your inventory documents with this MI01 transaction manually by entering material for material?
The real transaction for physical inventory is MI31. How do you want SAP to react if hundreds of materials are selected and inventory documents are created in a batch process?
SAP takes care about the material status in MI04 and MI07 transactions.
I am not aware of any exit for MI01 maintenance, you may consider Explicit and Implicit Enhancement Options

How to Validate a User on the click of a button in Oracle APEX

Hi,
How to Validate a User on the click of a button in Oracle APEX.
say for e.g: I want to allow only a specific user to go beyond after clicking on a button and restrict all the other Users. Any ideas please.
Thanks in Advance,
Af

Well , the actual idea was to hide the button for specific users and show the button only for some specific users... is this possible...?
@ AndyH: yeah, what you have suggested also fits well for my requirement... Could you please let me know how can i achieve it...
Regards,
Af

How to validate the file path when downloading.

Hi
How to validate the file path when downloading to Presentation or application Server.

hiii
you can validate file path by following way
REPORT zvalidate.
TYPE-POOLS: abap.
DATA: w_direc TYPE string.
DATA: w_bool TYPE abap_bool.
w_dir = 'c:\Myfolder\'.
CALL METHOD cl_gui_frontend_services=>directory_exist
EXPORTING
directory = w_direc
RECEIVING
result = w_bool
EXCEPTIONS
cntl_error = 1
error_no_gui = 2
wrong_parameter = 3
not_supported_by_gui = 4
OTHERS = 5.
IF NOT w_bool IS INITIAL.
WRITE:/ 'Directory exists.'.
ELSE.
WRITE:/ 'Directory does not exist.'.
ENDIF.
regards
twinkal

How to validate a date in message mapping

Hi experts,
how to validate a date in message mapping. For ex: if date comes as 2008/02/31, then file it shold not get processed.how to achieve this in message mapping. Please help .
Thanks&Regards,
Reyaz Hussain

Hi,
There are few simple ways for date validation as follow,
1.If you would like to handle it in XI only, then in message mapping you could verify about it with the help of generating smart exception.
For e.g in mapping there is one Date conversion API i.e. somthing DateTransformation It converts the incoming date format to required format. Here give the date format i.e expected from Sender File.
If in case the format miss-matched then it will create the exception.
You could handle this exception with the use of [Alert notification|http://help.sap.com/saphelp_nw04/helpdata/en/2c/abb2e7ff6311d194c000a0c93033f7/frameset.htm] and could be even able to notify to sender system about it.
2. The another solution is easy for SAP synchornous communication --If you are passing the file data to SAP, then you could use below function modules to verify date format in receiver RFC/BAPI or inbound IDOC program. If the sy-subrc is not 0 then don't process further.
CONVERT_DATE_FORMAT
ISU_DATE_FORMAT_CHECK
Thanks
Swarup

How to validate the FI-AR& AP& FI-GL   and CO-PA extractor in R3

Hi,
I would like to do the integration testing in R/3 and BW.
How to validate Standard FI-AR& AP& FI-GL and CO-PA extractor in R/3.
Snapshot result of RSA3 and the tables?
What are the tables and extractors need to be validate for FI-AR& AP& FI-GL   and CO-PA extractor in R3.
As per our integration testing for FI-AR& AP& FI-GL   and CO-PA extractor in R3.
How would i like to do the testing in BW QA system.
Please some one will help me in this and answer would be great appreciate.

Solved

How to validate Quantity field in TV - Inputfield ?

Hello All,
        I'm using a table view to show the output .
IN this table view I made 2 fields as Input fields.
Both the fields are Quantity fields.
Now when the user enters a value in this Quantity field I want to validate it with respect to it's units .
How can I do that ?
In my case if the user enters correct value it works but when he enters a wrong value my BSP is going for a dump.
I tried to debug the<b> LIPS table</b> to verify how SAP was handling this checking for the field <b>LFIMG</b>. But there there is a statement called chain --endchain.
SO there is no chance for debugging.
My code is as follows :-
        LOOP AT gt_final INTO wa_final.
          CLEAR: gv_row,lv_qty,lv_string,gv_len,gv_cell_id1.
          gv_row = sy-tabix.
          gv_len = STRLEN( gv_row ).
          gv_len = gv_len - 1.
* Modify the Third Column
          CONCATENATE 'INB01_TV_ID' '_' gv_row(gv_len) '_' '3' INTO gv_cell_id1 .
          lv_string = request->get_form_field( name = gv_cell_id1 ).
          WRITE lv_string TO lv_qty UNIT wa_final-units.
          CLEAR :wa_final-del_quantity.
          wa_final-del_quantity = lv_qty.
          MODIFY gt_final FROM wa_final TRANSPORTING del_quantity.
        ENDLOOP.
Can anyone tell me how to validate the entry for the Quantity filed ?
Regards,
Deepu.K
I have one more Question .
Whenever BSP goes for a dump in this case I want to handle this by a message .
Is it possible ?
Message was edited by:
        deepu k

Hello Raja,
       I want to validate the entry in the QUantity field with respect to the Unit of the Quantity.
I.e say for example I have a unit as PC (pieces) then the quantity must be only of thousands,lakks and so..on......but not in points i.e a piece quantity must be full either 200 ,2 lakhs or 2 pieces but not 2.5 pieces.
SO now if the user enters 2.5 it's a wrong value as the quantity for the Unit PIECES can't have half-piece. (2.5 = 2 + 0.5) .SO i want to validate this .
I hope I'm clear.
How should I do ?
Regards,
Deepu.k

How to validate a program in background

hello folks,
i need to validate my program, my program should run only in background
in case if it runs in foreground it should give error message. how to validate my
program.
can any one just tell the procedure how to do it.
any help will be greatly appreciated,
thanks in advance.
regards,
cnu

Hello CNU,
following snippet should do.
Regards
Klaus
if ( 'X' ne sy-Batch ).
message e000 with 'Only in Batch'(BTC).
endif.

How to validate a filed in a search help which is created in se11

hi
i got a requirement that validate a search help. i created a ztable with 3 fileds for that one i have to create a search help so help me to how to validate fields in a search help.
regards
krishna

Hello Krishna,
What do you mean by validating a field? Usually you use a search help to display possible values for a certain input field based on values in another table. You can restrict the values that are displayed by certain conditions if you need to.
If you want to allow only values based on complex conditions or authorizations of the user, you can always create a search help exit and in there you have complete control over what the user is allowed to see in the search help and what he is allowed to select.
Function Module F4IF_SHLP_EXIT_EXAMPLE gives you an idea what you can do in a search help exit.
Regards,
Michael

How to validate authenticity of my headphones?

Similar Messages

Maybe you are looking for