How to validate data in editable ALV report after making changes

Hi Folks,
My requirement is to display data in ALV format with quantity field is editable. Once we get the data in display mode only quantity field is enabled right. I am going to make changes to that quantity field and updating that modifed value to the database table. Before updating databse table i want to validate the data for perticluar field which I edidted(Quantity).
Can you guide me on this.
Currently I am using FM: GET_GLOBALS_FROM_SLVC_FULLSCR and calling the method CHECK_CHANGED_DATA.
I want to validate the quantity data.
If I entered negative value like -100 instead of 100. It should validate and show some popup screen or message.
Pls guide me on this or give some code to do that.
Thanks&Regards,
Surendra

Hey Surendra,
Check if this helps: Link:[Click here|Edit Field in Oops Alv;
There are many posts available for this requirement. Please look SDN/web for same.
Regards,
Santosh

Similar Messages

How to Transfer Data from editable ALV grid control to internal table?

Hi,
Can anyone give me a simple example by which I can transfer data from editable alv grid control back to the internal table. The ALV has been created by OO approach.
I would appreciate if the solution is provided without handling any events.
Regards,
Auro

Hello Auro
You simply need to call method go_grid->check_changed_data at PAI of the dynpro displaying the ALV grid. If data have been changed on the editable ALV grid then this method will raise event DATA_CHANGED. If you do not want or need to handle this event (e.g. for validating the edited values) then you do not define any event handler method.
Regards
Uwe

Validation of data in editable ALV report output for particular field

Hi Experts,
I have one input enabled field in ALV output. How to validate the data once user enters in that field and press enter? Is it possible to capture the value, hit the enter after user enters the data?
Thanks,
Surya Prakash

Halo Prakash,
1 First you should registeer the ENTER Event.
call method g_grid->register_edit_event
               exporting
                  i_event_id = cl_gui_alv_grid=>mc_evt_enter.
2 Declare event handler method for Event data_changed of cl_gui_alv_grid.
handle_data_changed
         for event data_changed of cl_gui_alv_grid
             importing er_data_changed.
3 Inside the Event handler method , you get the event parameter er_data_changed type ref to CL_ALV_CHANGED_DATA_PROTOCOL.
loop at er_data_changed->mt_good_cells into ls_good.
      case ls_good-fieldname.
        when 'FIELD1'.
          call method check_FIELD1.
        when 'FIELD2 '.
          call method check_FIELD2
      endcase.
    endloop.
4 Inside the Method check_FIELD1 and check_FIELD2 you can do the validation check .
call method er_data_changed->get_cell_value( Passing the row no and field name).
if the check fails you can use add_protocol_entry to write the error.
5 Finally call
er_data_changed->display_protocol.
Regards
Arshad

How to save a PDF in Acrobat XI after making changes without changing the document name

Whenever I work in Adobe Acrobat XI, I am forced to 'save as' when trying to save the changes I have just made. I am unable to save the document under the same name I have been working on it under (the way you can do in every other program). This happens every time I create form fields, merge or extract pages, add text, etc. This is extremely annoying because then I have to go into my documents, delete the old version, and then rename the document I was working on. HELP! I work in Acrobat every day creating and editing documents and there HAS to be a better way!

CTRL+F brings up the search bar within the document. When I go to File --> Save (or CTRL+S) I receive an error message that states "The document could not be saved. The file may be read-only, or another user may have it open. Pelase save the document with a different name or in a different folder". This message pops up for EVERY document I have modified that I try to save.

How can we find out data in an editable ALV grid has been changed or not?

Hi Experts,
How can we find out whether a data in an editable ALV grid has been changed or not.
I am using the
FM -> REUSE_ALV_GRID_DISPLAY_LVC
for ALV display.
I have to chekc whther data has been changed or not befor saving. if changed then only i want to
SAVE
. I cannot use the internal table comparison method for this purpose also i am not using OOP ALV.
So kindly sugest me an alternative.
Thanks and Regards,
Shahana

Hi,
Thanks for your answer. I already saw this post.
See this method.
CALL METHOD reuse_alv_grid->check_changed_data
IMPORTING
e_valid = lv_check.
This will update the internal table with the edited values. Then we can go for internal table comparison.
But my scenario will not allow me for itab comparisons.I just want to know the ALV data has been changed or not.
Regards,
Shahana

How can we edit alv report output.

hi all,
how can we edit alv report output

\[removed by moderator as it was just a copy and paste answer of someone else's work without giving a source\]
Edited by: Jan Stallkamp on Aug 25, 2008 4:35 PM

How to create check box in ALV Reports?

how to create check box in ALV Reports?

Hi
check the report BCALV_TEST_GRID_EDITABLE
or
check this report
REPORT ZRFC346_TST.
TABLES:SFLIGHT,RL034.
TYPE-POOLS:SLIS.
INCLUDE:<ICON>,<SYMBOL>.
DATA: G_REPID LIKE SY-REPID,
 G_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
 G_IT_SORT TYPE SLIS_T_SORTINFO_ALV,
 G_LAYOUT TYPE SLIS_LAYOUT_ALV,
 G_TABNAME_HEADER TYPE SLIS_TABNAME,
 G_TABNAME_ITEM TYPE SLIS_TABNAME,
 G_KEYINFO TYPE SLIS_KEYINFO_ALV,
 G_VARIANT LIKE DISVARIANT,
 G_EXTAB TYPE SLIS_T_EXTAB,
 I_SLIS_EXIT_BY_USER TYPE SLIS_EXIT_BY_USER.
DATA: XEVENT TYPE SLIS_T_EVENT,
 AEVENT TYPE SLIS_ALV_EVENT,
 VARIANT LIKE DISVARIANT,
 LAYOUT TYPE SLIS_LAYOUT_ALV,
 ASP_GROUP TYPE SLIS_SP_GROUP_ALV,
 GT_SP_GROUP TYPE SLIS_T_SP_GROUP_ALV,
 EXTAB TYPE SLIS_T_EXTAB WITH HEADER LINE,
 XFIELD TYPE SLIS_T_FIELDCAT_ALV,
 AFIELD TYPE SLIS_FIELDCAT_ALV,
 G_SUCOMM LIKE SY-UCOMM,
 G_SELFLD TYPE SLIS_SELFIELD.
DATA: SAV_SY_REPID LIKE SY-REPID.
CONSTANTS: CON_SFLIGHT TYPE LVC_FNAME VALUE 'SFLIGHT',
 CON_DISPLAY_FULL TYPE I VALUE 3.
Data to be displayed
DATA: BEGIN OF GT_SFLIGHT OCCURS 0.
 INCLUDE STRUCTURE SFLIGHT.
DATA:ACTIVATE(1).
DATA: END OF GT_SFLIGHT.
INITIALIZATION.
*........Initialisierung...............................................
PERFORM INITIALIZATION_RL034.
*........Field cata....................................................
PERFORM FIELD_CAT.
*........SPECIAL GROUP.................................................
PERFORM E07_SP_GROUP_BUILD USING GT_SP_GROUP[].
START-OF-SELECTION.
Selection
SELECT * FROM SFLIGHT INTO TABLE GT_SFLIGHT.
*........ALV CALL.......................................................
PERFORM ALV_CALL.
PERFORM USER_COMMAND_LOCAL USING G_SUCOMM G_SELFLD.
 FORM USER_COMMAND_LOCAL *
--> G_UCOMM *
--> G_SELFIELD *
FORM USER_COMMAND_LOCAL USING G_UCOMM LIKE SY-UCOMM
 G_SELFIELD TYPE SLIS_SELFIELD.
CASE G_UCOMM.
 WHEN 'ACT'.
ENDCASE.
ENDFORM.
 FORM ALV_CALL *
FORM ALV_CALL.
Call ABAP List Viewer (ALV)
G_LAYOUT-BOX_FIELDNAME = 'ACTIVATE'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
 I_BACKGROUND_ID = 'ALV_BACKGROUND'
 I_BYPASSING_BUFFER = SPACE
 I_BUFFER_ACTIVE = SPACE
 I_CALLBACK_PROGRAM = SAV_SY_REPID
 I_CALLBACK_PF_STATUS_SET = 'STATUS'
 I_CALLBACK_USER_COMMAND = 'USER_COMMAND_LOCAL'
 I_CALLBACK_TOP_OF_PAGE = ' '
 I_CALLBACK_HTML_TOP_OF_PAGE = ' '
 I_CALLBACK_HTML_END_OF_LIST = ' '
 I_STRUCTURE_NAME = 'SFLIGHT'
 I_BACKGROUND_ID = ' '
 I_GRID_TITLE =
 I_GRID_SETTINGS =
 IS_LAYOUT = G_LAYOUT
 IT_FIELDCAT = XFIELD[]
 IT_EXCLUDING =
 IT_SPECIAL_GROUPS = GT_SP_GROUP[]
 IT_SORT =
 IT_FILTER =
 IS_SEL_HIDE = 'X'
 I_DEFAULT = 'X'
 I_SAVE = 'A'
 IS_VARIANT =
 IT_EVENTS = XEVENT
 IT_EVENT_EXIT =
 IS_PRINT =
 IS_REPREP_ID =
 I_SCREEN_START_COLUMN = 0
 I_SCREEN_START_LINE = 0
 I_SCREEN_END_COLUMN = 0
 I_SCREEN_END_LINE = 0
 IT_ALV_GRAPHICS =
 IT_ADD_FIELDCAT =
 IT_HYPERLINK =
 I_HTML_HEIGHT_TOP =
 I_HTML_HEIGHT_END =
 IT_EXCEPT_QINFO =
 IMPORTING
 E_EXIT_CAUSED_BY_CALLER =
 ES_EXIT_CAUSED_BY_USER =
 TABLES
 T_OUTTAB = GT_SFLIGHT
 EXCEPTIONS
 PROGRAM_ERROR = 1
 OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.
 FORM status *
--> EXTAB *
FORM STATUS USING EXTAB TYPE SLIS_T_EXTAB.
SET PF-STATUS 'STAT' EXCLUDING EXTAB.
ENDFORM. " STATUS
*& Form INITIALIZATION_RL034
 text
--> p1 text
<-- p2 text
FORM INITIALIZATION_RL034.
SAV_SY_REPID = SY-REPID.
ENDFORM. " INITIALIZATION_RL034
*& Form DEFINE_EVENTS_RL034
 text
--> p1 text
<-- p2 text
FORM DEFINE_EVENTS_RL034.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
 EXPORTING
 I_LIST_TYPE = 0
 IMPORTING
 ET_EVENTS = XEVENT.
 exceptions
 list_type_wrong = 1
 others = 2.
ENDFORM. " DEFINE_EVENTS_RL034
*& Form FIELD_CAT
 text
--> p1 text
<-- p2 text
FORM FIELD_CAT.
DATA: LS_FCAT TYPE SLIS_FIELDCAT_ALV,
 L_LIN TYPE I.
REFRESH XFIELD.
 1. per Default eingeblendete Felder *
*........Ikone/Symbol..................................................
CLEAR AFIELD.
DATA: LS1_FCAT TYPE SLIS_FIELDCAT_ALV,
 L_LIN1 TYPE I.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
 EXPORTING
 I_STRUCTURE_NAME = CON_SFLIGHT
 I_BYPASSING_BUFFER = SPACE
 I_BUFFER_ACTIVE = SPACE
 CHANGING
 CT_FIELDCAT = XFIELD
 EXCEPTIONS
 INCONSISTENT_INTERFACE = 1
 PROGRAM_ERROR = 2
 OTHERS = 3.
DESCRIBE TABLE XFIELD LINES L_LIN1.
ADD 1 TO L_LIN1.
CLEAR LS_FCAT.
LS1_FCAT-FIELDNAME = 'ACTIVATE'.
LS1_FCAT-CHECKBOX = 'X'.
LS1_FCAT-KEY = 'X'.
LS1_FCAT-INPUT = 'X'.
LS1_FCAT-EDIT = 'X'.
LS1_FCAT-INTTYPE = 'C'.
LS1_FCAT-DATATYPE = 'CHAR'.
LS1_FCAT-INTLEN = 1.
LS1_FCAT-COL_POS = L_LIN1.
LS1_FCAT-SELTEXT_S = LS1_FCAT-FIELDNAME.
LS1_FCAT-SELTEXT_M = LS1_FCAT-FIELDNAME.
LS1_FCAT-SELTEXT_L = LS1_FCAT-FIELDNAME.
LS1_FCAT-SP_GROUP = 'A'.
APPEND LS1_FCAT TO XFIELD.
ADD 1 TO L_LIN.
ENDFORM. " FIELD_CAT
FORM E07_SP_GROUP_BUILD USING E07_LT_SP_GROUP TYPE SLIS_T_SP_GROUP_ALV.
DATA: LS_SP_GROUP TYPE SLIS_SP_GROUP_ALV.
CLEAR LS_SP_GROUP.
LS_SP_GROUP-SP_GROUP = 'A'.
LS_SP_GROUP-TEXT = 'SPECIAL'.
APPEND LS_SP_GROUP TO E07_LT_SP_GROUP.
ENDFORM.
Regards
Shiva

Can anyone tell me how to use GUI status in ALV report.

Can anyone tell me how to use GUI status in ALV report. I want to use buttons in ALV report.

Juheb,
see the link
http://help.sap.com/saphelp_nw2004s/helpdata/en/5e/88d440e14f8431e10000000a1550b0/frameset.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVALV/BCSRVALV.pdf
Adding a button on the ALV grid using OOPs
check these sites.
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/snippets/webDynproABAP-ALVControllingStandard+Buttons&
chk this.
alv-pfstatus:
http://www.sapdevelopment.co.uk/reporting/alv/alvgrid_pfstatus.htm
then how to capture that button click.
http://www.sapdevelopment.co.uk/reporting/alv/alvgrid_ucomm.htm
REPORT ZTESTALV.
TYPE-POOLS: SLIS.
*- Fieldcatalog
DATA: IT_FIELDCAT TYPE LVC_T_FCAT,
 IT_FIELDCAT1 TYPE SLIS_T_FIELDCAT_ALV..
*- For Events
DATA:IT_EVENTS TYPE SLIS_T_EVENT.
DATA: X_FIELDCAT TYPE LVC_S_FCAT,
 X_FIELDCAT1 TYPE SLIS_FIELDCAT_ALV.
DATA:X_LAYOUT TYPE LVC_S_LAYO.
"{ FOR DISABLE
DATA: LS_EDIT TYPE LVC_S_STYL,
 LT_EDIT TYPE LVC_T_STYL.
"} FOR DISABLE
DATA: BEGIN OF IT_VBAP OCCURS 0,
 VBELN LIKE VBAP-VBELN,
 POSNR LIKE VBAP-POSNR,
 HANDLE_STYLE TYPE LVC_T_STYL, "FOR DISABLE
 BUTTON(10),
 END OF IT_VBAP.
DATA: LS_OUTTAB LIKE LINE OF IT_VBAP.
SELECT VBELN
 POSNR
 UP TO 10 ROWS
 INTO CORRESPONDING FIELDS OF TABLE IT_VBAP
 FROM VBAP.
DATA:L_POS TYPE I VALUE 1.
CLEAR: L_POS.
L_POS = L_POS + 1.
X_FIELDCAT-SELTEXT = 'Button'.
x_fieldcat-fieldname = 'BUTTON'.
X_FIELDCAT-TABNAME = 'ITAB'.
X_FIELDCAT-COL_POS = L_POS.
X_FIELDCAT-OUTPUTLEN = '10'.
X_FIELDCAT-style = X_FIELDCAT-style bit-xor
 cl_gui_alv_grid=>MC_STYLE_BUTTON bit-xor
 cl_gui_alv_grid=>MC_STYLE_ENABLEd.
APPEND X_FIELDCAT TO IT_FIELDCAT.
CLEAR X_FIELDCAT.
L_POS = L_POS + 1.
X_FIELDCAT-SELTEXT = 'VBELN'.
X_FIELDCAT-FIELDNAME = 'VBELN'.
X_FIELDCAT-TABNAME = 'ITAB'.
X_FIELDCAT-COL_POS = L_POS.
X_FIELDCAT-EDIT = 'X'.
X_FIELDCAT-OUTPUTLEN = '10'.
x_fieldcat-ref_field = 'VBELN'.
x_fieldcat-ref_table = 'VBAK'.
APPEND X_FIELDCAT TO IT_FIELDCAT.
CLEAR X_FIELDCAT.
L_POS = L_POS + 1.
X_FIELDCAT-SELTEXT = 'POSNR'.
X_FIELDCAT-FIELDNAME = 'POSNR'.
X_FIELDCAT-TABNAME = 'ITAB'.
X_FIELDCAT-COL_POS = L_POS.
X_FIELDCAT-EDIT = 'X'.
X_FIELDCAT-OUTPUTLEN = '5'.
APPEND X_FIELDCAT TO IT_FIELDCAT.
CLEAR X_FIELDCAT.
L_POS = L_POS + 1.
"{FOR DISABLE HERE 6ROW IS DISABLED
SY-TABIX = 6.
LS_EDIT-FIELDNAME = 'VBELN'.
LS_EDIT-STYLE = CL_GUI_ALV_GRID=>MC_STYLE_DISABLED.
LS_EDIT-STYLE2 = SPACE.
LS_EDIT-STYLE3 = SPACE.
LS_EDIT-STYLE4 = SPACE.
LS_EDIT-MAXLEN = 10.
INSERT LS_EDIT INTO TABLE LT_EDIT.
*LS_EDIT-FIELDNAME = 'POSNR'.
*LS_EDIT-STYLE = CL_GUI_ALV_GRID=>MC_STYLE_DISABLED.
*LS_EDIT-STYLE2 = SPACE.
*LS_EDIT-STYLE3 = SPACE.
*LS_EDIT-STYLE4 = SPACE.
*LS_EDIT-MAXLEN = 6.
*INSERT LS_EDIT INTO TABLE LT_EDIT.
INSERT LINES OF LT_EDIT INTO TABLE LS_OUTTAB-HANDLE_STYLE.
MODIFY IT_VBAP INDEX SY-TABIX FROM LS_OUTTAB TRANSPORTING
 HANDLE_STYLE .
X_LAYOUT-STYLEFNAME = 'HANDLE_STYLE'.
"} UP TO HERE
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY_LVC'
EXPORTING
 I_CALLBACK_PROGRAM = SY-REPID
 IS_LAYOUT_LVC = X_LAYOUT
 IT_FIELDCAT_LVC = IT_FIELDCAT
TABLES
 T_OUTTAB = IT_VBAP[]
EXCEPTIONS
 PROGRAM_ERROR = 1
 OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Don't forget to reward if useful....

Editable ALV reports

hi,
do we have an option of creating Editable ALV reports in SAP.If yes can u plz explain me how to ? wht function modules should be used?

use -> wa_fieldcat-edit = 'X'. "sets whole column to be editable
here is a code i did for editable ALV,
*& Report ZDEMO_ALVGRID_EDIT *
*& Example of a simple ALV Grid Report *
*& The basic ALV grid, Enhanced to display specific fields as *
*& editable depending on field value *
REPORT ZDEMO_ALVGRID_EDIT .
TABLES: ekko.
TYPE-POOLS: slis. "ALV Declarations
*Data Declaration
TYPES: BEGIN OF t_ekko,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
statu TYPE ekpo-statu,
aedat TYPE ekpo-aedat,
matnr TYPE ekpo-matnr,
menge TYPE ekpo-menge,
meins TYPE ekpo-meins,
netpr TYPE ekpo-netpr,
peinh TYPE ekpo-peinh,
field_style TYPE lvc_t_styl, "FOR DISABLE
END OF t_ekko.
DATA: it_ekko TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
wa_ekko TYPE t_ekko.
*ALV data declarations
DATA: fieldcatalog TYPE slis_t_fieldcat_alv WITH HEADER LINE.
DATA: it_fieldcat TYPE lvc_t_fcat, "slis_t_fieldcat_alv WITH HEADER LINE,
wa_fieldcat TYPE lvc_s_fcat,
gd_tab_group TYPE slis_t_sp_group_alv,
gd_layout TYPE lvc_s_layo, "slis_layout_alv,
gd_repid LIKE sy-repid.
*Start-of-selection.
START-OF-SELECTION.
PERFORM data_retrieval.
PERFORM set_specific_field_attributes.
PERFORM build_fieldcatalog.
PERFORM build_layout.
PERFORM display_alv_report.
*& Form BUILD_FIELDCATALOG
Build Fieldcatalog for ALV Report
FORM build_fieldcatalog.
wa_fieldcat-fieldname = 'EBELN'.
wa_fieldcat-scrtext_m = 'Purchase Order'.
wa_fieldcat-col_pos = 0.
wa_fieldcat-outputlen = 10.
wa_fieldcat-emphasize = 'X'.
wa_fieldcat-key = 'X'.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'EBELP'.
wa_fieldcat-scrtext_m = 'PO Item'.
wa_fieldcat-col_pos = 1.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'STATU'.
wa_fieldcat-scrtext_m = 'Status'.
wa_fieldcat-col_pos = 2.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'AEDAT'.
wa_fieldcat-scrtext_m = 'Item change date'.
wa_fieldcat-col_pos = 3.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'MATNR'.
wa_fieldcat-scrtext_m = 'Material Number'.
wa_fieldcat-col_pos = 4.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'MENGE'.
wa_fieldcat-scrtext_m = 'PO quantity'.
wa_fieldcat-col_pos = 5.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'MEINS'.
wa_fieldcat-scrtext_m = 'Order Unit'.
wa_fieldcat-col_pos = 6.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'NETPR'.
wa_fieldcat-scrtext_m = 'Net Price'.
wa_fieldcat-edit = 'X'. "sets whole column to be editable
wa_fieldcat-col_pos = 7.
wa_fieldcat-outputlen = 15.
wa_fieldcat-datatype = 'CURR'.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'PEINH'.
wa_fieldcat-scrtext_m = 'Price Unit'.
wa_fieldcat-col_pos = 8.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
ENDFORM. " BUILD_FIELDCATALOG
*& Form BUILD_LAYOUT
Build layout for ALV grid report
FORM build_layout.
Set layout field for field attributes(i.e. input/output)
gd_layout-stylefname = 'FIELD_STYLE'.
gd_layout-zebra = 'X'.
ENDFORM. " BUILD_LAYOUT
*& Form DISPLAY_ALV_REPORT
Display report using ALV grid
FORM display_alv_report.
gd_repid = sy-repid.
call function 'REUSE_ALV_GRID_DISPLAY'
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY_LVC'
EXPORTING
i_callback_program = gd_repid
i_callback_user_command = 'USER_COMMAND'
is_layout_lvc = gd_layout
it_fieldcat_lvc = it_fieldcat
i_save = 'X'
TABLES
t_outtab = it_ekko
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " DISPLAY_ALV_REPORT
*& Form DATA_RETRIEVAL
Retrieve data form EKPO table and populate itab it_ekko
FORM data_retrieval.
SELECT ebeln ebelp statu aedat matnr menge meins netpr peinh
UP TO 10 ROWS
FROM ekpo
INTO CORRESPONDING FIELDS OF TABLE it_ekko.
ENDFORM. " DATA_RETRIEVAL
*& Form set_specific_field_attributes
populate FIELD_STYLE table with specific field attributes
form set_specific_field_attributes .
DATA ls_stylerow TYPE lvc_s_styl .
DATA lt_styletab TYPE lvc_t_styl .
Populate style variable (FIELD_STYLE) with style properties
The NETPR field/column has been set to editable in the fieldcatalog...
The following code sets it to be disabled(display only) if 'NETPR'
is gt than 10.
LOOP AT it_ekko INTO wa_ekko.
IF wa_ekko-netpr GT 10.
ls_stylerow-fieldname = 'NETPR' .
ls_stylerow-style = cl_gui_alv_grid=>mc_style_disabled.
"set field to disabled
APPEND ls_stylerow TO wa_ekko-field_style.
MODIFY it_ekko FROM wa_ekko.
ENDIF.
ENDLOOP.
endform. " set_specific_field_attributes
Thanks
Seshu

How to show data vertical in ALV

How to show data vertical in ALV?
such as :
[http://img402.imageshack.us/img402/9978/20101230215621.png|http://img402.imageshack.us/img402/9978/20101230215621.png]
Moderator Message: Search for available information. Keywords - Dynamic Internal Table
Edited by: kishan P on Dec 30, 2010 7:35 PM

Transpose the contents of your internal table.
Original:
A 1 1 1
B 2 2 2
Transposed:
A B
1 2
1 2
1 2

How to handle interactive list in alv reports

hi experts.
how to handle interactive list in alv reports.
regards.
subhasis

HI Subhasis,
below is the sample code for handling an interactive ALV report, hope this helps you ..
REPORT ZTEST_ALV123.
TYPE-POOLS:SLIS.
DATA :   IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
          IT_FIELDCAT1 TYPE SLIS_T_FIELDCAT_ALV.
DATA: BEGIN OF ITAB OCCURS 0,
       VBELN LIKE VBAK-VBELN,
       POSNR LIKE VBAP-POSNR,
       END OF ITAB.
DATA: BEGIN OF ITAB1 OCCURS 0,
       VBELN LIKE LIKP-VBELN,
       POSNR LIKE LIPS-POSNR,
       VGBEL LIKE LIPS-VGBEL,
       VGPOS LIKE LIPS-VGPOS,
       END OF ITAB1.
DATA: IT_LIPS LIKE ITAB1 OCCURS 0 WITH HEADER LINE.
SELECT VBELN
        POSNR
        FROM VBAP
        INTO TABLE ITAB.
IF SY-SUBRC = 0.
SORT ITAB BY VBELN .
SELECT VBELN
   POSNR
   VGBEL
   VGPOS
   INTO TABLE ITAB1
   FROM LIPS
   FOR ALL ENTRIES IN ITAB
   WHERE VGBEL = ITAB-VBELN
     AND    VGPOS = ITAB-POSNR.
ENDIF.
DATA: X_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
X_FIELDCAT-FIELDNAME = 'VBELN'.
X_FIELDCAT-TABNAME = 'ITAB'.
X_FIELDCAT-COL_POS = 1.
APPEND X_FIELDCAT TO IT_FIELDCAT.
CLEAR X_FIELDCAT.
X_FIELDCAT-FIELDNAME = 'POSNR'.
X_FIELDCAT-TABNAME = 'ITAB'.
X_FIELDCAT-COL_POS = 1.
APPEND X_FIELDCAT TO IT_FIELDCAT.
CLEAR X_FIELDCAT.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
    I_CALLBACK_PROGRAM       = SY-REPID
    I_CALLBACK_PF_STATUS_SET = 'PFSTATUS'
    I_CALLBACK_USER_COMMAND = 'HANDLE_USER_COMMAND'
    IT_FIELDCAT              = IT_FIELDCAT
TABLES
    T_OUTTAB                 = ITAB
EXCEPTIONS
    PROGRAM_ERROR            = 1
    OTHERS                   = 2.
IF SY-SUBRC = 0.
ENDIF.
*&      Form POPUP
      text
     -->P_EXTAB    text
FORM POPUP USING P_EXTAB TYPE SLIS_T_EXTAB.
"here double click on PFSTATUS and create the status, "activate, before that set PICK for choose(F2).
*- Pf status
SET PF-STATUS 'PFSTATUS'.
ENDFORM.                 " POPUP
*&      Form HANDLE_USER_COMMAND
      text
     -->R_UCOMM      text
     -->RS_SELFIELD text
FORM HANDLE_USER_COMMAND USING R_UCOMM     LIKE SY-UCOMM
                               RS_SELFIELD TYPE SLIS_SELFIELD.
CASE R_UCOMM.
    WHEN '&IC1'.
      IF RS_SELFIELD-FIELDNAME = 'VBELN'.
        READ TABLE ITAB INDEX RS_SELFIELD-TABINDEX.
        LOOP AT ITAB1 WHERE VGBEL = ITAB-VBELN
                          AND VGPOS = ITAB-POSNR.
          MOVE-CORRESPONDING ITAB1 TO IT_LIPS.
          APPEND IT_LIPS.
        ENDLOOP.
        PERFORM INTERACTIVE_REPORT.
      ENDIF.
ENDCASE.
ENDFORM.                    "HANDLE_USER_COMMAND
*&      Form interactive_report
      text
FORM INTERACTIVE_REPORT .
X_FIELDCAT-FIELDNAME = 'VBELN'.
X_FIELDCAT-SELTEXT_L = 'VBELN'.
X_FIELDCAT-TABNAME = 'IT_LIPS'.
X_FIELDCAT-COL_POS = 1.
APPEND X_FIELDCAT TO IT_FIELDCAT1.
CLEAR X_FIELDCAT.
X_FIELDCAT-FIELDNAME = 'POSNR'.
X_FIELDCAT-SELTEXT_L = 'ITEM'.
X_FIELDCAT-TABNAME = 'IT_LIPS'.
X_FIELDCAT-COL_POS = 2.
APPEND X_FIELDCAT TO IT_FIELDCAT1.
CLEAR X_FIELDCAT.
X_FIELDCAT-FIELDNAME = 'VGBEL'.
X_FIELDCAT-SELTEXT_M = 'SO #'.
X_FIELDCAT-TABNAME = 'IT_LIPS'.
X_FIELDCAT-COL_POS = 3.
APPEND X_FIELDCAT TO IT_FIELDCAT1.
CLEAR X_FIELDCAT.
X_FIELDCAT-FIELDNAME = 'VGPOS'.
X_FIELDCAT-SELTEXT_M = 'SO ITEM'.
X_FIELDCAT-TABNAME = 'IT_LIPS'.
X_FIELDCAT-COL_POS = 4.
APPEND X_FIELDCAT TO IT_FIELDCAT1.
CLEAR X_FIELDCAT.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      I_CALLBACK_PROGRAM = SY-REPID
      IT_FIELDCAT        = IT_FIELDCAT1
    TABLES
      T_OUTTAB           = IT_LIPS
    EXCEPTIONS
      PROGRAM_ERROR      = 1
      OTHERS             = 2.
IF SY-SUBRC = 0.
ENDIF.
ENDFORM.                    " interactive_report
Regards,
Ranjita
null

How to use intractive list in Alv REPORT

how to use intractive list in Alv REPORT with example.
thangs
venki.......

Hi
using the USER_COMMAND we can move to the Secondary(interactive) list in the ALV
see the sample code
report yh645_secndry_alv.
type-pools: slis.
data: fieldcat type slis_t_fieldcat_alv,
fieldcat_ln like line of fieldcat,
fs_layout type slis_layout_alv,
t_layoout like standard table
of fs_layout.
data: begin of fs_spfli,
carrid type spfli-carrid,
connid type spfli-connid,
countryfr type spfli-countryfr,
cityfrom type spfli-cityfrom,
airpfrom type spfli-airpfrom,
countryto type spfli-countryto,
cityto type spfli-cityto,
airpto type spfli-airpto,
fltime type spfli-fltime,
deptime type spfli-deptime,
arrtime type spfli-arrtime,
distance type spfli-distance,
distid type spfli-distid,
fltype type spfli-fltype,
period type spfli-period,
checkbox,
color(3),
end of fs_spfli.
data:
begin of fs_table,
carrid type spfli-carrid,
connid type spfli-connid,
end of fs_table.
data: begin of fs_sflight,
check,
color(3).
include type sflight.
data:end of fs_sflight.
data:
begin of fs_table1,
carrid type sflight-carrid,
connid type sflight-connid,
fldate type sflight-fldate,
end of fs_table1.
data:
t_spfli like standard table
of fs_spfli.
data:
t_table like standard table
of fs_table.
data:
t_table1 like standard table
of fs_table1.
data:
t_sflight like standard table
of fs_sflight.
data:
t_sbook like standard table
of sbook.
data t_layout type slis_layout_alv.
select *
into corresponding fields of table t_spfli
from spfli.
perform start_list_viewer.
perform get_spfli_details.
*& Form SUB1
text
-->RT_EXTAB text
form sub1 using rt_extab type slis_t_extab.
data: flight type slis_extab.
flight-fcode = 'SFLIGHT'.
append flight to rt_extab.
set pf-status 'SFLIGHT'. " EXCLUDING RT_EXTAB.
endform. "SUB1
*& Form START_LIST_VIEWER
text
--> p1 text
<-- p2 text
form start_list_viewer .
data: pgm like sy-repid.
pgm = sy-repid.
fs_layout-box_fieldname = 'CHECKBOX'.
fs_layout-info_fieldname = 'COLOR'.
call function 'REUSE_ALV_LIST_DISPLAY'
exporting
i_callback_program = pgm
i_callback_pf_status_set = 'SUB1'
i_callback_user_command = 'USER_COMMAND'
i_structure_name = 'SPFLI'
is_layout = fs_layout
tables
t_outtab = t_spfli
exceptions
program_error = 1
others = 2.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform. " START_LIST_VIEWER
*******Process Call Back Events (Begin)**************************
form user_command using ucomm like sy-ucomm
selfield type slis_selfield.
case ucomm.
when 'SFLIGHT'.
selfield-refresh = 'X'.
perform get_spfli_details.
select *
from sflight
into corresponding fields of table t_sflight
for all entries in t_table
where carrid eq t_table-carrid
and connid eq t_table-connid.
perform display_sflight.
when 'SBOOK'.
selfield-refresh = 'X'.
perform get_sflight_details.
select *
from sbook
into corresponding fields of table t_sbook
for all entries in t_table1
where carrid eq t_table1-carrid
and connid eq t_table1-connid
and fldate eq t_table1-fldate.
perform display_sbook.
endcase.
endform. "USER_COMMAND
*& Form SUB2
text
-->RT_EXTAB text
form sub2 using rt_extab type slis_t_extab.
data: flight type slis_extab.
flight-fcode = 'SBOOK'.
append flight to rt_extab.
set pf-status 'SBOOK'. " EXCLUDING RT_EXTAB.
endform. "SUB2
*& Form DISPLAY_SFLIGHT
text
--> p1 text
<-- p2 text
form display_sflight .
data: pgm like sy-repid.
pgm = sy-repid.
clear t_layout.
fs_layout-box_fieldname = 'CHECK'.
fs_layout-info_fieldname = 'COLOR'.
call function 'REUSE_ALV_LIST_DISPLAY'
exporting
i_callback_program = pgm
i_callback_pf_status_set = 'SUB2'
i_callback_user_command = 'USER_COMMAND'
i_structure_name = 'SFLIGHT'
is_layout = fs_layout
tables
t_outtab = t_sflight
exceptions
program_error = 1
others = 2.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform. " DISPLAY_SFLIGHT
*& Form GET_SPFLI_DETAILS
text
--> p1 text
<-- p2 text
form get_spfli_details .
loop at t_spfli into fs_spfli.
if fs_spfli-checkbox = 'X'.
fs_spfli-color = 'C51'.
fs_spfli-checkbox = '1'.
fs_table-carrid = fs_spfli-carrid.
fs_table-connid = fs_spfli-connid.
append fs_table to t_table.
modify t_spfli from fs_spfli.
endif.
endloop.
endform. " GET_SFLIGHT_DETAILS
*& Form GET_SFLIGHT_DETAILS
text
--> p1 text
<-- p2 text
form get_sflight_details .
loop at t_sflight into fs_sflight.
if fs_sflight-check = 'X'.
fs_sflight-color = 'C71'.
fs_sflight-check = '1'.
fs_table1-carrid = fs_sflight-carrid.
fs_table1-connid = fs_sflight-connid.
fs_table1-fldate = fs_sflight-fldate.
append fs_table1 to t_table1.
modify t_sflight from fs_sflight.
endif.
endloop.
endform. " GET_SFLIGHT_DETAILS
*& Form DISPLAY_SBOOK
text
--> p1 text
<-- p2 text
form display_sbook .
data: pgm like sy-repid.
pgm = sy-repid.
call function 'REUSE_ALV_LIST_DISPLAY'
exporting
i_callback_program = pgm
i_structure_name = 'SBOOK'
tables
t_outtab = t_sbook
exceptions
program_error = 1
others = 2.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform. " DISPLAY_SBOOK
Reward points for useful Answers
Regards
Anji

How to insert horizontal lines in alv report?

hi,
    i have to insert horizontal lines in alv report.( RM07MLBB )
        actually my requirement is:
                           basis list = RM07MLBB.
first secondary list = another report is called here ( RM07DOCS )
                  i want to insert horizontal lines in the first secondary list, when i execute individually RM07DOCS , i can get horizontal lines, but when i dounle click in the basic list --> in the first secondary list , i am not getting the horizontal lnes.
functional modules used are REUSE_ALV_HIERSEQ_LIST_DISPLAY & REUSE_ALV_GRID_DISPLAY.
    here in this program,
                    is_layout = alv_layout.
hence i tried to give
              alv_layout-no_hline = ' '.
but not effecting.
          can some one please tell me , how to insert lines in the alv report.
thanks in advance,
Dastagir.

hello,
     so i cannot insert horizontal lines in the first secondary list according to my sorting condition, i.e., in a single block there should be :
       if same delivery challan number is repeating they should come in the same block,
for the corresponding delivery challen number, if have po number, is repeating , they also should come in the same block.
                   in this way i have to seperate the blocks containing EXNUM , EBELN CONDITIONED.

How to select multiple row in ALV report

Hi friends,
1. How to select multiple row in ALV report
               ( How to set tab in ALV report and want to select multiple line.)
Thanking you.
Subash

Hi Sahoo,
If you are using the class CL_GUI_ALV_GRID. In methods SET_TABLE_FOR_FIRST_DISPLAY.
in layout structure you will find field SEL_MODE
pass :
LS_LAYOUT-SEL_MODE = 'A'.
In PAI.
CALL METHOD GRID->GET_SELECTED_ROWS
    IMPORTING
      ET_INDEX_ROWS = T_ROWS
      ET_ROW_NO     = T_ROWID.
Hope these will solve your problem.
Regards,
Kumar M.

How to validate Date

Hi,
We have a date field in the form. I am validating date format as YYYY-MM-DD, validation works fine. But If user enters invalid date, how to validate date? For examples:
2006-02-31 It is an invalid date. How can i validate it.
If anybody have sample code, it will help me a lot.
thanks
Neopal.

Hi Neopal,
You can use something like the following to test the date is valid, use the validation event on the <Field> which you want to validate to call a Rule something like this (not complete)..
<Rule name='isDateValid'>
 <RuleArgument name='date'/>
 <block>
 <script>
 var dateToTest = env.get('date');
 var formatter = new java.text.SimpleDateFormat('YYYY-MM-DD');
 Date validDate = formatter.parse(dateToTest);

How to validate data in editable ALV report after making changes

Similar Messages

Maybe you are looking for