How to validate date between Header and Detail Block..
Hi All,
I was trying to find a way where, suppose I enter 'from date' and 'to date' in the header block.then in detail block all 'from dates' and 'to dates' should be restricted between the dates entered in the header block.
Thank you
Or U Can Simply set in the child item lowest / highest Allowed Value
Invoke Property pallete for child date item and set the following
lowest Allowed Value :header.from_date (must be prefix with :)
Highest Allowed Value :header.to_date
siju.koiply
Similar Messages
-
How to sinck data between production and R12 instance
Hi,
I am working on Oracle Apps up-gradation project.
Now I have upgrade 11.5.7 to R12 (12.0.4) successfully. I started up-gradation task with 1 May of production data (backup) on new machine.
Client wants to live R12 from 1/August/2009.
Please suggest how to sinck data between production and R12 instance.
Thanks
AnupHi,
It is not possible to do what you propose (sync data from an 11.5.7 system to a 12.0.4 system). You will need to re-run the upgrade against the August 1 data, following your original upgrade procedures.
Regards,
John P.
http://only4left.jpiwowar.com -
How to place content between header and tabs?????
i have header part which has to be constant through out the portal but below that i have 3 links
like I AM employee,employer,broker..
which has to be shown only in home page above tabs..
how can i achieve this..
how to place content between header and tabs..:(kindly help..Hi Samiran
Try these approaches and see if that works.
1. In the Header Section, you header footer shell and add a Header Portlet. This Header Portlet associated JSP file will have all static content in the top section. In the bottom section, add these 3 links say to right hand corner. Show these links only based on some request property like isHome. Now for the main book having Home and other page associate a BackingFile. Within this backing file in the lifecycle methods like preRender or handlePostBack, get instance of BookManager and all the pages and see which page is Active. For that active page check its page definition label which will be always unique. IF the page def label is like home_page_def (this is page def label you give for home page), then set the key value in the request property like isHome=true. By only doubt is after Book backingfile is triggered, the header has to be reloaded, because only then it can pick up the request attributes.
2. Create a brand new portlet like HomePageLinks portlet. Make its Title Property Not Visible, and other user interface properties like NoBorder, NoTheme etc. The associated JSP will have the 3 links you mentioned right aligned. You can use css styles to make it right etc. Now drop this portlet in the Header Shell area. You already have HeaderPortlet in the top, below that you will have this HomePageLinks portlet. Now associate a backing file for this Portlet to show, only if the Books current active page is Home page by comparing the def label etc as mentioned above.
In both scenarios, only concern is when we click on different Pages, the entire portal has to be rendered right from the Top Header. Only then the backing file will set the key, and the HomePageLinks portlet can show or hide accordingly.
Try firing an Event when the Home page is clicked. This listener for this Event can be the HomePageLinks Portlet. I guess Event mechanism should work irrespective of where the portlet is placed. In the event listner, see if you can show/hide this portlet.
The only challenge is Header section needs to reloaded everytime you click on a Tab.
Start putting some backing files and System.out.printlns to see if the Header section gets reloaded on click on any Tabs.
These are just my thoughts over the top of my head. Other forum users can have better alternatives or a different version of above approaches.
Thanks
Ravi Jegga -
How to pass data between JDialog and its parent window ?
Hi,
I am new to swing. I want to know how pass data between a JDialog and its parent window.
If you have any information please reply with example code.
Thank Youhi Encephalopathic ,
I was looking for something like as it was given in the link provided by you.
Thank you for reply It really helped me. -
How To validate Date of Birth and Sysdate
Hi friends,
I want to compare day and month in date of birth and day and month in sysdate if both are equal i want to display some message like 'Happy Birthday' is there any possibility please let me know
Regards
AnushaHi,
Some thing like e.g.
IF TO_NUMBER( TO_CHAR( l_your_date, 'MMDD') ) = TO_NUMBER( TO_CHAR( SYSDATE, 'MMDD') ) THEN
END IF;
In future it is better post these pure SQL and PL/SQL question to SQL and PL/SQL space
Regards,
Jari -
How to exchanging data between SAP and P3?
could use BAPI directly between SAP and P3? And if we use XI as middleware, which protocols or methods should we use?
any answer should be appreciated.Hi,
U havent mentioned what exactly ur P3 system is.
Considering it to be Primavera P3 system, the integration could not be done directly using a BAPI since the structure of Projects (as well as the rules to define the projects) are different in SAP and Primavera P3.
Thats y XI is required. U have to use Idoc/RFC interfaces. Have a look about what Primavera wants to say about this integration
http://www.primavera.com/newsroom/primavera_sap_051007.asp
Regards,
Prateek -
How to validate non commited items in detail block.
Hi All,
I have a Detail block with 10 rows and 2 columns. the select of items is based on LOV. If i select One item in one row, then the user cannot select the same item again in other rows. either I need to not show the selected item in LOV or I need to raise form trigger failure and ask him to change values. This is to be done before commiting the items. Can anyone, please suggest me some way or triggers I can use.
Thank you.If the process is done by a key-commit trigger or a when button-pressed trigger then it is simple . But if there is no such trigger then you should create it because it is more convenient to make controls inside key-commit rather than in pre-update or pre-insert because these triggers do not accept restricted built-ins.
To validate your items just loop through the list of records and compare the values to the one you are on. Then if there are no match then you go to the next record to search for.
Something like this :
declare
v_current_value_to_compare varchar2(100);
v_record pls_integer;
begin
go_block('detail_block_name');
first_record;
while :system.last_record = 'FALSE' loop
loop
next_record;
v_current_value_to_compare := :detail_block_name.item_name;
v_record := :system.trigger_record;
if :detail_block_name.item_name = v_current_value_to_compare then
-- make your control here
end if;
exit when :system.last_record = 'TRUE';
end loop;
go_record(v_record);
end loop;
end; -
Need to skip page break between header and Detail sections
Hello,
I am combining two reports in one report (one in header section and another report in the body section). when this report is run, there's a page break between these two sections. Is it possible to eliminate it? Ideally I would like the detail section to start as soon as the header section of the report is completed in the same page instead of starting (detail section report) in a new page.
Any help is highly appreciated. Thanks,
SundarI'd put them into one section to control the breaks.
-
How to syncronize data between resource and IdM?
I created a form (assign to proxy administrator) for reconciliation, and it gets executed when I imported new user into IdM through full reconciliation. In this way I can assign email of user to waveset.email.
But later when the email gets updated in resource directly, how can I propagate the new value to IdM (without activeSync). By running a full reconciliation again doesn't seem to re-run the proxy administrator's form. I always thought full reconciliation would do the trick, but only now I realize it does not work at all !!?
What should I do then to synchronize the data?Recon was not really designed to automatically synchronize attributes. Typically, this is implemented via ActiveSync. With that said, there is an option in Recon to "Attribute-Level Reconciliation". This allows you to provide a list of resource attributes to watch and if there is a change, Recon calls a workflow, where you can execute any changes you would like.
I believe this workflow is called "Audit Native Change To Account Attributes". Look at wfrecon.xml located in /sample.
Edited by: R1100SLA on Dec 21, 2007 12:12 AM -
How to maintain space between table and header in ssrs
Hi Everyone,
I have created a report. In page header of this report, On First Page space between header and
body is good , but from next page, space is not maintain.
Please suggest me how to maintain space at every page of report.
Thanks.Can you post a screenshot?
This can be achieved if you are repeating column headers on each page. Just change row height of header and align text to bottom, and make sure there is no space between Page Header and Tablix.
- Vishal
SqlAndMe.com -
How to Reconcile Data Between SAP Source Systems and SAP NetWeaver BI
Hi,
I just read "How to Reconcile Data Between SAP Source Systems and SAP NetWeaver BI". While I'm waiting for more authorisation to r/3 to carry it out and test this functionality.
I'd like to ask a question to anyone who has implemented this type solution. On page 10 it talks about creating a view then setting up the datasource. The solution talks about runnig a query. I suspect when we run a query I would run it for only a period(using variable) to reconcile.
My question is this. Will the datasource extractor on /r3 only select the period in our variable or will it do a full selection of the data which would then be passed to BW for filtering?
RegardsDEar Mark,
There are several avenues where you can see and reconcile your data with source system, u can see data in by tcode RSA3 for a datasource, and compare the values with actual document posted into the R/3 system. Respective fuctional consultant canhelp you a lot to confirm the data.
On BW side u can see the data in PSA and then check tranformations which subsequent change/update/reject data records based on the selective conditions.
hope this helps.
Kindly assign the points if it works.
Revert back if u need futher help/information. -
Relatively new to Microsoft report services. I have created a report which takes a single parameter named 'SelectedDate'. This report runs fine (uses complex query of hours of the selected date and complex joins & aggregate calculations between SQL
database tables). I created a new report with two parameters, namely, StartDate and EndDate. Also created a sql stored procedure which gives all dates between StartDate and EndDate. Added subreport to this report which calls my first report and defined 'SelectedDate'
parameter to get the value as "=First(Fields!dt.Value, "DataSet1") - where dt is the resultset of procedure called in DataSet1. When I run this report, in the subreport, all I see is the report for 'StartDate' which is the passed
value of the first parameter. I can't find a way to pass entire array of dates as parameter, to which user can browse forwards and backwards. Any idea? Thanks in advance for your help!HI Visakh16..Never mind my comment..I tried it again. This time I went to the completion of previewing..and noticed that the table with DataSet1 does display dates and first report underneath but once I click any other date, it displays the subreport on
full page and navigation back arrow (with hint 'back to Parent Report) solution is not bad..so unless you a way to achieve my desired layout mentioned above - I am good for now! Thanks for your pointer in right direction!
One small observation for thread readers: When I published the report to the report server, the back button (back to Parent Report) which was available to me at design time, is not displayed at client's browser. Upon checking pertinent threads, concluded
that this is known issue for years and recommendation I concluded from various threads is: Use back button of browser and it should (& did) keep the parent report page, with table with selected dates intact. A few have noticed different behaviour
for older browser versions. -
Keeping heading and detail on the same page
Hi, I have a report with a group header section and a detail section. How can I keep the heading section and all the detail section on the same page without starting each group on a new page?
The detail section will have either 2 or 3 records with some of the objects set to grow if the data doesn't fit on one line. This results in several changes of group appearing on the same page which is what I want. However, what I don't want is the header section on one page with the detail section on the next, or the header and some of the detail records on one page with the rest of the detail records on the next. What I would like is the report to start a new page if the header and all the detail records don't fit on the same page but without starting a new page for every group change. How can I achieve this?you can put the group header and details into a sub report on the old group header section.
then hide the details section -
Hi,
I have an internal table with the value below. I need to populate to header data line (1 record only) and detail is an internal table
When there is a change of customer, i need to copy 123 to header and 2 records of material (abc & xed), sales (100 & 200) and qty (10 & 12) to detail internal table.
for customer 567, i need to copy to header and material aqs, sales 150 and qty 5 to detail internal table.
May I know how can I achieve this?
customer material sales qty
123 abc 100 10
123 xed 200 12
567 aqs 150 5
877 abc 140 8
Thanks
RgdsHello,
As per my understanding, your requirement is that you have an internal table which has a combined data and you want to split it into headr and detail internal tables, based on the change of the customer number which is the first field in the combined internal table. If so then assume that it_com is the combined internal table and it_head and it_det as the header and detail interbnal tables respectively.
First sor the combined internal table on customer number
sort it_com by kunnr.
Now loop across this table and on the event at new customer populate the header table and in the remaining loop populate the detail table.
loop at it_com into wa_com.
at new kunnr.
wa_head-kunnr = wa_com-kunnr.
append wa_head-kunnr to it_head-kunnr.
clear wa_head-kunnr.
endat.
append the records from the combined table into the item table, whatever fields required
endloop.
Regards,
Sachin -
I need to display data from both header and detail, details has to come from other table also
--CREATE TABLE
CREATE TABLE [dbo].[Table_Dept](
[DeptId] [int] NULL,
[DeptCode] [char](2) NULL,
[DeptName] [nvarchar](100) NULL
) ON [PRIMARY]
CREATE TABLE [dbo].[Table_Detail](
[Header_ID] [int] NOT NULL,
[Name] [nvarchar](50) NOT NULL,
[DescValue] [nvarchar](max) NULL
) ON [PRIMARY] TEXTIMAGE_ON [PRIMARY]
CREATE TABLE [dbo].[Table_Header](
[Header_Id] [int] NULL,
[UserName] [nvarchar](50) NULL
) ON [PRIMARY]
--INSERT DATA
INSERT INTO Table_Dept (DeptId, DeptCode, DeptName)
VALUES (1, 'HO', N'Head Office'),
(2, 'BO', N'Branch Office'),
(3, 'RO', N'Reginal Office'),
(4, 'SO', N'Sub Division Office')
INSERT INTO Table_Header
(Header_Id, UserName)
VALUES (1, N'Ravi'), (2, N'Gopal'), (3, N'Deepa')
INSERT INTO Table_Detail
(Header_ID, Name, DescValue)
VALUES (1, N'ListNumber', N'1005'),
(1, N'PhaseCode', N'AA'),
(1, N'DeptCode', 'BO,RO'),
(1, N'City', 'Bangalore'),
(2, N'ListNumber', N'1006'),
(2, N'PhaseCode', N'AB'),
(2, N'DeptCode', 'SO,RO'),
(2, N'City', 'Delhi'),
(3, N'ListNumber', N'1007'),
(3, N'PhaseCode', N'AA'),
(3, N'DeptCode', 'HO'),
(3, N'City', 'Mumbai')
--EXPECTED RESULT
HeaderId
ListNumber
PhaseCode
DeptName
City
User
1
1005
AA
Branch Office, Reginal Office
Bangalore
Ravi
2
1006
AB
Sub Division Office,Reginal Office
Delhi
Gopal
3
1007
AA
HO
Mumbai
Deepa
ShanmugaRajsee below code
SELECT *,
STUFF((SELECT ',' + DeptName
FROM Table_Dept
WHERE ',' + t.DeptCode + ',' LIKE '%,' + DeptCode + ',%'
FOR XML PATH('')),1,1,'') AS DeptName
FROM
SELECT h.Header_ID,
td.ListNumber,
td.PhaseCode,
td.DeptCode,
td.City
FROM Table_header h
INNER JOIN (SELECT Header_ID,
MAX(CASE WHEN Name = 'ListNumber' THEN DescValue END) AS ListNumber,
MAX(CASE WHEN Name = 'PhaseCode' THEN DescValue END) AS PhaseCode,
MAX(CASE WHEN Name = 'DeptCode' THEN DescValue END) AS DeptCode,
MAX(CASE WHEN Name = 'City' THEN DescValue END) AS City
FROM Table_Detail
GROUP BY Header_ID)td
ON td.Header_ID = h.Header_ID
)t
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs
In case of not having department table...consider the dept code, where the values are now comming from table and
need result if the data is not displayed from table and they are static..
use case when 'Bo' then 'Branch Office'
when 'Ro' then 'Reginal Office'
when 'So' then 'Sub Division Office'
when 'Ho' then 'Head Office'
kindly suggest how to replace my above query
ShanmugaRaj
Maybe you are looking for
-
I have formatted the My Passport drive as a MS-DOS (FAT) but the G4 which is running on Mac OS 10.2.8 can not see the drive on the desktop. The G5 (Mac OS 10.6.8) has no problem reading the drive. I have about 7 GB of data that I need to transfer fro
-
Satellite Pro P300: external resolution 1024x768 instead of 1680x1050
Hi, I run my Sat P300 on XP, and the screen on this laptop is just fine (1440x900 pixels on radeon HD 3650). Now I want to connect the laptop to an external flatscreen monitor, a Samsung, that asks for a optimal resolution of 1680x1050 pixels. The sa
-
Items available in CVC not in planning book
Hi Team, we are facing some error... we need to activate some new products in the forecasting process so the items are already transferred to SCM .Items are available in SCM data base and even in CVC but it not reflecting in the planning book. Pls he
-
Table only showing some borders
HI, I'm new to dreamweaver although have mucked around a bit with MX. I now have CS3 and I'm going crazy over this one problem. ( at the moment anyway) I have a table with 3 rows and 3 columns. A lovely double border shows around each cell in design
-
How do I get rid of norton safe search
I have inadvertedly accepted an update with ASK CONNECTED. i GOT RID OF aSK BUT IT REMAINS IN A nORTON TOOLBAR TAHT i CAN'T GET RID OF.