How to validate long text in me31k( contract creation)

Hi,
I want to validate the long text in creation of contract(T_code - ME31k). In creation it self i want to get the long text for validation. How to get the long text value. For eg. "Release order text' i am giving the value as '10'. While saving the document in ME31k i need to get the long text. Please do the needful.
Thanks
Jag
Moderator Messag: Do not expect the forums to do your work for you.
Edited by: kishan P on Jan 19, 2011 4:33 PM

Use Read_text function module.
you need to pass
ID
LANGUAGE
NAME
OBJECT to the function moduel
To find the Text id name language and object these are the following steps. Example: FB02
1. goto FB02, Enter Document number
2. from menuselect Goto>Header-->header Text..... New window will be displayed
3. select the Header Text. here you can see all the text.
4. click on the TEXT (which you want to know the Text id) , then press log ICON (you can find in bottom right of the text window) it looks like a rolled paper.
5. in the Next window you will find Text Name. Text ID, Language. etc...
Regards,
Lalit Mohan Gupta.

Similar Messages

Tcode FV50: How to find long text in FI Document line item Before Saving.

Hi,
How to find long text in FI Document line item.
During Parking of the FI document through Tcode FV50 i m giving the some text in the long text not in the text field.
I would like to validate the Long Text Before Saving in user exit "U300" under the "Sunstitution" .
Please anybody can be help me out where exactly this long text is going to be stored or in which internal table or memory id.
Please give me the answer as soon as possible .
Note:- Read_Text function module is not useful. Because Read_text useful after saving document.

Hi Amit,
In application area FINANCIAL ACCOUNTING , go for node LINE ITEM. Here create a step & maintain the prerequisite as per your requirement & in the check you can mention the code or you can direct it to a custom program like ZFI_RGGBR000.
Here while maintaining the check you will get structures BKPF & BSEG in which you will get the desired field you are looking for.
Just try to explore in your system how the other validations are maintained.
After you are done with all your code, you have to run the regeneration program RGUGBR00.
Here utmost care should be taken while running regeneration program, you should select all the checkboxes in the selection screen except GENERATE SETS, GEN SUBSTN ROUTNS IN ALL CLNTS & TRACE PROG. GENERATE CALLS .
Hope this make your doubt clear.
Regards
Abhii

How to print long text in scripts

plzzzzzzzzz answer this qestion
how to print long text in scripts

Hi Kranthi,
You can create Text Id and include that in your script.
For example:
/E TEXT
/: INCLUDE ZTEXT OBJECT TEXT ID ST
Hope this helps.
Please reward if useful.
Thanks,
Srinivasa

How to create Long Text in Module Pool Program

Hi all,
I want to develop a new module pool program and I want to use Long text screen in this program and also want this text will store in table.I never develop such type of module pool before.This long text will like sales order long text.Please let me know the steps how I can develop such type of program and how I save long text huge data in table.
Thanks & Regards
Nirmal

Hai ,
here you have to use custom control, for this
DATA: line(256) TYPE c,
      text_tab LIKE STANDARD TABLE OF line,
      field LIKE line.
1) Create custom control in your screen
2)   CREATE OBJECT: container EXPORTING container_name = 'TEXTEDIT',   "--> (this is custom control name in screen)
                   editor    EXPORTING parent = container.
3) CALL METHOD editor->get_text_as_stream "This method reads data from custom control , inserts into itab 'text_tab'
         IMPORTING
          text = text_tab.                                       "
      READ TABLE text_tab INTO line INDEX 1. read the text into wa 'line'
if you want more clarity , see 'ABAPDOCU' >ABAP USER DIALOGS>    COMPLEXSCREEN ELEMENTS--> DEMO CUSTOM_CONTROL

How to read long text in Document line item

Hi,
How to read long text in FI Document line item.

Use Read_text function module.
you need to pass
ID
LANGUAGE
NAME
OBJECT to the function moduel
To find the Text id name language and object these are the following steps. Example: FB02
1. goto FB02, Enter Document number
2. from menuselect Goto>Header-->header Text..... New window will be displayed
3. select the Header Text. here you can see all the text.
4. click on the TEXT (which you want to know the Text id) , then press log ICON (you can find in bottom right of the text window) it looks like a rolled paper.
5. in the Next window you will find Text Name. Text ID, Language. etc...
Regards,
Lalit Mohan Gupta.

How to validate an text field item using javascript for numbers only.

hi,
how to validate an text field item using javascript for numbers only.please help me on this urgent
please mail me solun if posible on [email protected]

Hi,
Page HTML header
<script>
function onlyNum(evt) {
// Usage: onKeyPress="return onlyNum(event)"
evt = (evt) ? evt : window.event;
var charCode = (evt.which) ? evt.which : evt.keyCode;
if (charCode > 31 && (charCode < 48 || charCode > 57)) {
    var status = 'This field accepts numbers only!';
    alert(status);
    return false;
var status = '';
return true;
</script>Item HTML Form Element Attributes
onKeyPress="return onlyNum(event)"Br,Jari

How to use long texts in explanation tool tip?

Hi ,
Can anyone tell me how to add long text in Explanation tool tip?
I am able to use short OTR texts in explanation tool tip but not able to use long OTR texts.
Thanks and regards,
Vivek Shetty.

For long text
method1
Create TEXT node- general attributes change text type to include text
then you can input text name/text object/text id/language
method2
create PROGRAM LINE node - use FM READ_TEXT to read it to a internal table
then use LOOP or TABLE node to display it
For TEXT module(For foreign language)
Tr-code:smartforms -- choose Text module(not choose form)--create a text module object
then enter smartform Create TEXT node- general attributes change text type to text module
input the text module name which created by above
btw SO10 is just for Scriptform, in smartforms we use text module to replace SO10

How to read header text in MM contract (ME31K/ME32K) before saving record?

Hi All,
In ME31K / ME32K (Contracts), before saving the contract I would like to check if the user has entered header text in the contract or not.
I am using customer exit MM06E005.
Can anybody help me with this?
Thanks in advance.

Try creating dummy text id which will be part of text determination procedure @ Customers sales text & document header text.
else, maintain the SO10-text against this text ID. whenver user createds quotation this text will be defaulted irrespective of the cusotmer.
then based on if user want to modify the text they have to enter manually in this text id. print this text in header.
Regards,
Reazuddin MD

How to print long text in ALV

i want to print a description in text mode which is 5-6 lines some times it have a blank line also so
how to print in ALV .i m using READ_TEXT function but sumtime it not works when text exceed 4-5 lines
what i sud do.

hi,
there is another way u can use yours internal table field like long text field. that is.
parameters: salno type vbak-vbeln.
data: begin of itab occurs 0,
vbeln type vbak-vbeln,
matnr type vbap-matnr,
longtext type thead occurs 0,
end of itab.
data: itabstxl type standard table of stxl with header line.
select single vbakvbeln vbapmatnr into (itab-vbeln, itab-matnr)
                                 from vbak inner join vbap
                                   on vbakvbeln = vbapvbeln
                                    where vbak~vbeln = salno.
    select single tdobject tdname tdid tdspras from stxl
                                                 into (itabstxl-tdobject,itabstxl-tdname,itabstxl-tdid,itabstxl-tdspras)
                                                       where relid = 'TX'
                                                        and tdobject = 'VBBK'
                                                        and tdname = salno    "YOUR OWN TDNAME e,g
                                                        and tdid = 'Z003'
                                                        and tdspras = 'EN'.
call function 'READ_TEXT'
exporting
CLIENT                        = SY-MANDT
    id                            = itabstxl-tdid
    language                      = itabstxl-tdspras
    name                          = itabstxl-tdname
    object                        = itabstxl-tdobject
ARCHIVE_HANDLE                = 0
LOCAL_CAT                     = ' '
IMPORTING
HEADER                        =
tables
    lines                         = itab-longtext
EXCEPTIONS
ID                            = 1
LANGUAGE                      = 2
NAME                          = 3
NOT_FOUND                     = 4
OBJECT                        = 5
REFERENCE_CHECK               = 6
WRONG_ACCESS_TO_ARCHIVE       = 7
OTHERS                        = 8
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
break abaper.
I HOPE THIS WILL SOLVE THIS WILL SOLVE THE PROBLEM OF THE OTHERS AS WELL.

How to display long text in smartforms

Hi experts,
Iam trying to display long text into smartforms.I got the long text into ITAB frm database
in the abap program.In the form interface how to define the variable?In the long text i have 6 lines.
points guaranteed
cheers
kaki

Kaki,
Delcare a table and getting the LONG TEXT is not the right way of doing this.
You create a TEXT object and change the TYPE to INCLUDE TEXT. Once that is done all you have to do specify the parameters of your long text - TEXT ID, TEXT OBJECT and TEXT NAME. These are the same parameters that you use for READ_TEXT funciton. You don't have to fetch the text manually, it happens automatically.
Make sure this is a part of the main window as this might run into multiple pages.
Regards,
Ravi
Note : Please reward the posts that help you.

How to update long text in symptoms/problems ?

Hi All,
Can anybody help me regarding how to update the long text of a symptom/problem?
Please help.
Regards,
Jeetu

Hi Jeetu,
Can you Please elaborate your query.
Are you talking about Problem/solutions created using Tcode: IS01( used in service scenario)
Or
The Text Management i.e. Text Types
Regards.
Shalini Chauhan

How to display Long text in a JLabel with multiline??

Hi,
Suppose I have a label that displays a long text....
""This is an example label that displays long text, how to break the line????.........""
how to display it like below with one label?
""This is an example label
that displays long text, how
to break the line????.........""
Thanks

so basically do this
JLabel myLabel = new JLabel();
String theText = "<html>This is an example label<br>
that displays long text, how<br>
to break the line????.........</html>";
myLabel.setText(theText);Obivously, u dont have to use a separate string, u could just call setText or pass it into the JLabel constructor, i just separated it to make it easier to see what your supposed to do.
GOod Luck

How to display Long text in alv output

Hi,
I have developed an ALV report.It is displaying the output.
There is another requirment for alv output text field as below
From the long text fields show only the first 20 characters and afterwards the long text icon. If the icon is clicked open the long text display screen.
Please give your suggestion how to work on this requirement.
Thanks in advance

Hi,
Create a hotspot for the long text column of ALV.
When user clicks on the hotspot, handle the event to display long text screen.
You may refer sample program of hotspot ALV :
Goto SE38
Type BCALV*
Click F4
search for HOTSPOT or EVENTS & you will get a sample program.
Best regards,
Prashant

How to UPLOAD Long Text in QS21

Dear All,
I have written BDC to upload Master Inspection Characterstics,
The Problem is I need to upload the long Text, (which is of some 250 chars).
How to do this.
Help is appriciated.
Thanks in advance
Arun

Hi,
I think there is an ICON to enter the long text.
U can start filling the LONG text here using
RSTXT-TXLINE(03) - this takes around 70 chars the next
chars in RSTXT-TXLINE(04) and so on. U can get this
in SHDB recording.
Regards,
GSR.

How to keep long text in bdc using create_text function module

hi,
ihave bdc in that i having field like long text i have to upload the long text using create_text function module how to use and where to use in bdc. wat parameters i have to pass exactly.
i need some other information like how can i pass this to BDC i got like this .
can u plz check it.
its a length of 255 chaters
perform bdc_field using 'RSTXT-TXLINE(02)'
'zzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz'
& 'zzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz'.
perform bdc_field using 'RSTXT-TXLINE(03)'
'xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx'
& 'xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx'.
perform bdc_field using 'RSTXT-TXLINE(04)'
'yyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy'
& 'yyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy'.
perform bdc_field using 'RSTXT-TXLINE(05)'
'hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh'
& 'hhhhhhhhhhhhhhhhhhhhhh'.

Hi,
Use this coding where do u want,
data: begin of textline occurs 10.
        include structure tline.
data: end of textline.
start-of-selection.
textline-tdformat = '*'.
textline-tdline = 'TESTING FOR CREATION OF TEXT'.
append textline.
clear textline.
    call function 'CREATE_TEXT'
         exporting
              fid       = '0013'
              flanguage = sy-langu
              fname     = '0095000501'
              fobject   = 'VBBK'
         tables
              flines    = textline
         exceptions
              no_init   = 01
              no_save   = 02.
end-of-selection.

How to validate long text in me31k( contract creation)

Similar Messages

Maybe you are looking for