How to verify Data coming from R/3 to PSA

Hi mates,
I want to know MUST the 'No. of Records' returned from a RSA3 in R/3 be the same with the No of Records in PSA ? (if there are no manipulations ?)
Also, how to I check how many data records has been loaded in the PSA ?
Please advice

Hi John,
   Yes, the nuber of records transferred from R3 should the number of records in PSA.
   The number of records in RSA3 gives the number of records collected to be sent in R3.
   To know the number of records in PSA, -> RSMO-> CLICK THE  2ND ICON FROM RIGHT(LIKE A COLORED STACK)-> tHIS WILL POP A SCREEN THAT WILL GIVE YOU INFO ON THE NUMBER OF RECORDS. It actually gives total number of packets and number of records in each packet etc.
   Hope this helps you..
Thanks,
Raj

Similar Messages

  • How to insert data coming from 2 different file adapters in to one DB adapt

    Hi
    i want insert data in to database containing two diffferent tables, so i imported tables in to DB adapter by creating relation ships.But, data for two tables are in xml format & two are in different locations.So, i used 2 file adapters to get data from 2 different & i used BPEL(Define service later) Service. now in bpel i used receive activity to receive one file adapter data ( i checked create instance in receive) then used transform activiy for tranformation & finally invoke activity to invoke DB adapteer........similarly i repeated sequetially to 2 file adapter, by keeping 2nd receive(no need to check create instance) next to invoke.*Problem is after deployment finished only data coming from 1st receive is inserting to the table...& 2 nd receive not working it showing as Pending & showing as Asynchronus Call back inte console*
    I configured all the adapters perfectly..........Can any one can help me how to Commit 2 nd receive to insert data in the 2nd table
    Regards,
    jay

    Thank u both for ur replay.........
    I am doing this in 11g there is no problem regarding transform activity.
    My requirement is
    two different files from two different folders in a drive & we can't use one file adapter bcoz both have different columns(only few are common columns) so we use two different xsd's .So, i am using two file adapters to insert in database having two different tables with respect to two different files data coming from two file adapters. i am using one DB adapter to insert bcoz both tables are in same database with relationships & i used BPEL(define service later) .
    NOW PLEASE SUGGEST ME THE FLOW IN BPEL TO INSERT BOTH FILES IN THERE RESPECTIVE TABLES IN DATABASE.
    The flow i did 1st file adater--->receive--->transform---->invoke----->DB adapter.....Then again repeating this as keeping 2nd receive below 1st invoke
    2nd file adapter-------->2nd receive---->2nd invoke------>same DB adapter
    MY problem is only data coming from 1st process is inserting & 2nd one is not working as i discussed earlier........I USED READ FILE OPTION, UNCHECKED DELETE FILES OPTION & SET DIFFERENT POLLING FREQUENCY FOR BOTH FILE ADAPTERS.
    I tried to set correlation but it is not working & later tried i kept non-blocking invoke as TRUE in DB adapter also didn't work...........also i tried this transaction property in bpel component _<property name="bpel.config.transaction"_
    many="false" type="xs:string">required / requiresNew</property>...............BUT NO CHANGE...........
    Regards,
    jay
    Edited by: 910162 on Apr 5, 2012 12:38 AM

  • Verifying data coming from Cisco Unified CCX Historical Reports

    Good afternoon
    I (along with a number of other colleagues) are heavily involved in a project to take data from a wide variety of different sources and merge it all into one system so that we can report on it in a joined-up manner.
    The project comprises a number of different types of data source (such as Telephony or CRM). Within each data source type, we have various suppliers of those products. In the case of telephony data (which I'm looking into at the moment), the eventual aim is to make it possible to take data from any of the telephony platforms in use across our business (currently AVAYA, Alcatel and Cisco) and report on it in a uniform way, thus negating the need for an end-user to know what the Cisco definition of AHT is (for example).
    The switch I'm currently looking at is a managed switch, meaning that we don't have any sort of direct access to the back-end database(s). We could probably get it, but I suspect that the company that manages it for us would probably charge a small fortune for that. In view of this, I'm working with a number of the standard reports in the Cisco Unified CCX system. My plan (at the moment anyway) is to identify the reports that we can use that will best provide details of all calls into and out of our contact centres. I'd be looking to get the exact details of each individual call, which could then be rolled up into manageable intervals (such as 15-minute or 30-minute).
    Before I go much further, I'd like to be clear on something: I'm a database developer rather than a telecoms engineer so if I ask something that appears to be obvious then I apologise in advance. I've got quite a bit of experience of working with the CTI system that sits on top of our AVAYA platform, but it's proving to be a bit of a wrench effectively "un-learning" that system so that I can make room in my head for the Cisco solution.
    So, what I've learned (or have guessed) so far is this:
    When I run the Application Performance Analysis report, the Application Names that are returned are effectively the Call Routes that are set up in the system. Each Call Route can be fed by one or more Called Number (which I understand to essentially be a DDI);
    The Application Summary Analysis report shows the same Application Name information as is shown in the Application Performance Report. However this report also shows the Called Number, thus providing slightly more information about the individual DDI being answered;
    My next plan is to try and run an Agent-level report so that I can see exactly which calls each agent handled. This is where I've run into problems: I ran the CSQ - Agent Summary report for the whole of 17th October. I then ran the Agent Detail report for the same period, and ran it out to CSV so that I could "play" with the data. The CSQ - Agent Summary Report shows that a particular agent on a particular CSQ Name (ID) handled a total of 29 calls. However, if I filter the Agent Detail report for that agent and CSQ, I get a total of 30 calls and for the life of me am unable to identify where the missing call is coming from. Initially I'd thought it might be bacause the CSQ in question has two separate DDIs but as far as I can see, this is making no difference.
    I NEED to be 100% sure that when I'm importing the data from the Cisco reports into our system, I am then able to mimic the types of reports that are coming from Cisco, with the same figures. Therefore, if anyone can help me, I'll be extremely grateful.
    TIA
    Ian Henderson

    The "Cisco Unified CCX Historical Reports Scheduler" sits in my startup folder but seems like it doesn't "run" at startup. So I ran a "test":
    - Manually right-clicked the "Cisco Unified CCX Historical Reports Scheduler" icon in the startup folder and chose "Run as Administrator"
    I didn't log off or reboot PC and the reports are running again. I checked the "properties" of the icon and I did make sure it was already set to "Run this program as an Administrator" under the "Compatibility" tab.
    Not sure why it's not working...
    Thank you for any help you can provide....

  • How to send data coming from modem to a text file

    hi frnds
    I have a modem program in which i can receive sms and call details.What i want is i want to store those msgs to a text file.
    The String variable to which that data is going is in readData() method of some Receiver.java file.
    I tried like this
    FileOutputStream file = new FileOutputStream(new File("modem.txt"));
    Receiver rcvr = new Receiver(); // here i am getting error " the constructor Receiver() is undefined
    String data = rcvr.readData(str);// here error is str cannot be resolved.
    file.write(data); // here i am getting error "Syntax error on token "data", VariableDeclaratorId expected after this token"
    can anyone help me ???

    You need to go and read some Javadoc for all the methods you are trying to call. While you're there have a look in java.io for methods that can write a String.

  • How to store the data coming from network analyser into a text or excel file

    Hii everyone
    I'm using Agilent 8719ET network analyser and wish to store the data coming from netowrk analyser into a text file/ excel file.
    Presently I'm able to get the data on Labview graph using GPIB . Can anyone suggest how to go ahead after collect data sub vi. How can the data be stored into a file apart from showing on the graph?
    Attached is the vi for kind consideration...
    Looking for help
    Regards
    Rohit
    Attachments:
    Agilent 87XX Series Exceed Max Meas.vi ‏43 KB

    First let me say that your code really looks pretty good. The data handling could be made more efficient by calculating the number of datapoints that are going to be in the completed dataset and preallocating the entire array -- but depending upon your answer to my questions, the logic in the lower shift register may be going away - so we won't worry about that right now.
    The thing I need to know before addressing the data storage question is: Each time you call "Collect and Display Data.vi", how many element are in the array? Are you reading single data points, or a group of data? (BTW: if the answer to that question is obvious based on the way the other VIs are setup, I don't have the drivers so I can't tell what the setup values are.) Second, how fast does the loop iterate? Are we talking msec per loop?, seconds? fortnights?
    The issues here are two-fold: how much data? and how fast is it coming? The answer to these will tell you how to save the data.
    Mike...
    Certified Professional Instructor
    Certified LabVIEW Architect
    LabVIEW Champion
    "... after all, He's not a tame lion..."
    Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

  • How can i use an ao card (pci 6723) to output data and to trigger an ai o acquire the data coming from the ao card?card (pci 6254) t

    Hello
    I am trying to perform AO (pci 6723) and to trigger my AO card (pci
    6254) to read the data coming from the AO card. I am using LV7,1,
    win2000.
    Is an RTSI cable necessary or I can connect the trigger signals externally ?
    I am using the LV example " multi function - synch ai-ao.vi" but i can't for some reason configure the trigger lines.
    thank you in advance for your time.
    Yiannis

    Hello Yiannis,
    If I understand you correctly, you want to synchronize your analog input and analog output that are started by a trigger on the analog input board. If you don't want to use the RTSI lines, your best bet is to export the AI Sample Clock and then read it in to the AO board. There is an example on ni.com called DAQmx - Synchronized AIAO Shared Clock. It appears to be having techincal issues so I have attached the example below. To export ai/sampleclock, use DAQmx Export Signal.vi after Get Terminal Name with Device Prefix.vi. Export Sample Clock to PFI3 (There are only connections between the sample clock and PCI3/4/8/9). Connect PFI3 on your AI board to PFI0 on your AO board (with a wire). Then change the source for the AO Timing.vi to Devx/PFI0. If you want to do triggering, stick the DAQmx Trigger.vi between the Timing property node and the DAQmx Start.vi on the AI task. I have shown how to do this in the modified version below. Please take a look at it and let me know if you have any questions. If you still get an error please take a screenshot of it and post to the forum. Have a great day!
    Sincerely,
    Marni S.
    Attachments:
    Synchronized_AIAO_Shared_Clock[Modified].vi ‏140 KB

  • Reading data coming from a port

    How can I read the data coming from a webcam?

    Reading from a parallel port. But even if you do know how to read from a serial port that would be helpful

  • Fill a table with data coming from an RFC

    Hello everyone:
    I've followed the Weblog "How many lines of java code did i write for a simple Web Dynpro?"
    /people/durairaj.athavanraja/blog/2004/10/17/how-many-lines-of-java-code-did-i-write-for-a-simple-web-dynpro
    I've called an RFC and created a table with data coming from it (which is also a table). My question is, if in this table there's a field named "UserType" there are two possible values for this field:
    "userA"
    "userB"
    How can I get the table only show me the "userA" registers? The RFC does return all of the users, but when filling the table, can I put an if-else somewhere on my code?
    Thanks a lot
    Alejandro

    Hi Alejandro,
    Referring to the link provided "The logic of the filter process is not implemented in Web Dynpro. The application developer must implement the action to be executed."
    We would have to implement the action onFilter in the controller implementation. Ideally, we fill the data retrieved from backend into a List (java.util.List) (this could be done on init of view) and then subset the list after meeting the criteria in the action handler(say
    onActionFilterData(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent).
    Having done this, you may bind the output list back to the node (shown in table)
    Regards,
    Chaitanya

  • How to get Date Format from Local Object.

    Hi All,
    I am new to Web Channel.
    I need to know Date format From date of locale.
    suppose there is a date "01/25/2010" date in date field I want to get string "mm/dd/yyyy". Actually I have to pass date format to backend when I call RFC. 
    Is there any way to get Date format from "Locale" object. I should get date format for local object
    I get local object from "UserSessionData" object but how to get Date format from it.
    I am not looking for Date value. I am looking for current local date format ("mm/dd/yyyy or dd/mm/yyyy or mon/dd/yyyy) whatever local date format.  I could not find example which show how to get date format from "Locale" object.
    Any help will be appreciated with rewards.
    Regards.
    Web Channel

    Hi,
    You can get it from "User" or "Shop" business object.
    Try to get User or Shop Business Object as shown below.
    BusinessObjectManager bom = (BusinessObjectManager) userSessionData.getBOM(BusinessObjectManager.ISACORE_BOM);
    User user = bom.getUser();
    char decimalNotation = user.getDecimalPointFormat().getGroupingSeparator();
    If you are seeing "1,234.00" then above code will return "."
    I hope this information help you to resolve your issue.
    eCommerce Developer.

  • How to read data directly from clusters

    hi all,
    how to read data directly from clusters
    Thanx in advance,
    amruta.

    Using macro:
    RP-IMP-C2-B2.
    RP-IMP-C2-B1.
    RP-IMP-C2-ZL.
    ....etc.
    For TM cluster, U also can use BAPIs like HR_TIME_RESULTS_GET
    More details see SAP HR course 350(HR Programming)

  • How to crete data type from XSD

    Hi All,
    can anyone tell me ...how to create data type from agiven xsd.
    I need urgently....
    thanks in advance....

    import this XSD, load this in your mapping editor and then use this to crate the datatype manually.
    Or, use XML spy, load this XSD and then you should be able to see the Structure, or,
    Look into the XSD data and decipher things yourself
    Regards
    Bhavesh

  • In the NI Library VI: Extract Numbers, the string control is automatically loaded each time the VI is opened with "Counting to five: one 2 three 4.0 five. Where is this string data coming from?

    Even after deleting the string "Counting to five: one 2 three 4. five." from the string control and replacing it with another string the original string returns after the VI is saved then reopened. Where is this string data coming from? I've attached a copy of the library function. I've been able in my application to get around the problem by replacing the string control with a string constant. But I'm still curious as to what's going on.
    Thanks,
    Chuck
    Solved!
    Go to Solution.
    Attachments:
    Extract Numbers Test.vi ‏9 KB

    Chuck,
    String control has been set to default with the string you are seeing.  To change this, enter the new string, right click the control and select
    Data Operations>>Make Current Value Default
    Now save your vi.

  • How to make data flow from one application to other in BPEL.

    Hi All,
    I am designing work-flow of my application through BPEL(JDeveloper), I am making different BPEL projects for different functions, like sales manager got the order from sales person and sales manager either approve it or reject it, if he approve it it goes to Production manager and he ships the goods, now I want to keep sales person, sales manger,production manager in seperate BPEL files and want to get the output of sales person to sales manager and sales manager to production manager please help me in dong this.
    I was trying to make partner link in Sales manager of sales person and getting the input from there. I dont know this is right even or not, if it is right I dont know how to make data flow from one application to other.
    Experience people please guide.
    Sales Person -----> Sales Manager ----> Production Manager
    Thanks
    Yatan

    Yes you can do this.
    If you each integration point to be in different process, you have to create three BPEL process.
    1. Create a Async BPEL process 'A' which will be initiated when sales person creates the order.
    2. From BPEL process 'A' call a ASync BPEL process 'B' which has the approval flow. Depending on the input from process 'A' the sales manager will review the order in workflow and approve or reject and send the result back to process 'A'.
    3. Based on the result from workflow, invoke the Sync BPEL process 'C', where you can implement the shipping logic.
    -Ramana.

  • How to manage data aggrigation from multiple systems.

    Hi,
    How to manage data aggrigaion from multiple system which should support paging too.
    please suggest me , best possible soluntion.
    Thank You

    what is ment by aggrigation? what is the difference between Inheritance and aggrigation ? How can it implement as part of the programm

  • Data deleted in ODS, data coming from the data source : 2LIS_11_VASCL

    Friends,
    I have situation :
    Data deleted in ODS, data coming from the data source : 2LIS_11_VASCL.
    when for the above ods and the data source when trying to delete the request whole data got delted.
    All the data got deleted in the fore ground. no background job has been generated for this.
    I ma really worried abt this issues. can u please tell me what should be the possibilities for this issue.
    Many Thanks
    VSM

    Hi,
    I suppose you want to know the possibilitiy of getting the data.
    If the entire data is being deleted, you can reload the data from source system.
    Load the setup table for your application. Then carry out init request.
    Please note that you would have to take a transaction-free period for carrying out this activity so that no data is missed.
    Once this is done, delta queues will again start filling up.

Maybe you are looking for