How to verify lockout treshold and duration set bij local GPO using script
Hi all,
I want to succeed in veryfying the account lockout treshold and duration by checking registry.
However this is impossible in server 2012 r2. previously these settings where visible in the registry but now it seems that they are hide in the SAM section which is not accessible.
WMI RSOP does not contain information as it is no group policy.
Any alternatives?
Kind rergards,
AL
Hi AL,
>>how to verify lockout treshold and duration set bij local GPO using script
What does this mean? Does this mean that we are using a standalone server and want to check the account lockout policy set via local GPO?
>>Just found that using net accounts the local gpo settings are shown not i have to find a way to strip that using powershell to be able to veriy the correct line and content
What do we want to achieve here? As you stated, we can run net accounts
command to check password policy and account lockout policy. Besides, we can also run command
gpreult/h report.html with admin privileges to collect group policy result report to check this.
Best regards,
Frank Shen
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]
Similar Messages
-
How to get the kerning value and set it to back use script?
hi,guys
I come back again.
I encountered a kerning problem.
how to get the kerning value and set it to back use script?
Thanks very much!For both cases, the filename can be found on the FILE.ReceivedFileName Context Property. You can access this Property in a Pipeline Component or Orchestration and take any action you want, such as apply to a database.
The value is accessed by: MyReceivedMessage(FILE.ReceivedFileName)
In the case of a duplicate EDI Interchange, you would use the Failed Message Routing feature to capture the error message with either an Orchestration or Send Port. -
How do I cut and paste sets of lines for use in various Math questions?
How do I cut and paste sets of lines for use in various Math questions?
Thank you for your reply. My problem is much simpler than you are thinking. As a teacher I prepare sheets with random number generators.
EG. 256 + 389= ______ or 467
- 384
469 + 753= ______
or 5)750
On a PC I was able to start a page of A4 with one set and then drag and drop down and across the page.
On my Macbook I can get the numbers in but the lines do not copy. I asked at one of my One to One sessions and it had my 'trainer' stumped. He said he would make enquiries but so far no news. I am using Numbers.
I hope I have explained my 'problem' satisfactorily. -
I have an iphone 4s that i got last week and i set it up just using the phone. today my dad restored it as my mothers iphone so i lost all of my data. I tried to restore it as my original phone i had but i exited out of itunes and now my phone wont showup in itunes or on my computer
Did you fail to import them to your computer before restoring?
Not good.
They are likely gone.
You can try restoring from backup. -
i have photoshop CC and lightroom on my computer for 9.99/mo ...i just purchased a new computer to replace my existing computer and need to know how to download photoshop CC and lightroom onto my new computer using my current account so i don't have to pay again
http://www.microsoft.com/mac/support
http://answers.microsoft.com/en-us/mac/forum/macword?auth=1
http://answers.microsoft.com/en-us/mac/forum/macoffice2011-macword/microsoft-wor d-for-mac-2011-will-not-open-error/ecc42616-6f49-40bb-b8f5-e21c711ea359 -
How to Verify Db logs and backups
1) How to check that Oracle Database logs are being archived or cleaned up on a regular basis in Solaris
2) How to Verify backups are being performed in solaris844081 wrote:
EdStevens wrote:
844081 wrote:
1) How to check that Oracle Database logs are being archived or cleaned up on a regular basis in Solaris
2) How to Verify backups are being performed in solarisIf you are talking about oracle backups and logs, it is OS independent. Look at the various options of the LIST command in rman. In addition, have your rman backup jobs write a log that you can examine.Can you be clear about what you are saying.. just letme know about the steps to be followed... :)Step 1 - point your browser to tahiti.oracle.com. This is the portal to the complete oracle doc set
Step 2 - drill down to your product and version. Here you will find the complete doc set for said product/version
Step 3 - locate the backup and recovery reference
Step 4 - Find the LIST command
Step 5 - read what each option of LIST can show you. -
HT1766 how do i "RESTORE PHONE" and choose "SET AS NEW"
Can anyone help me? I went to apple store today and was told that I need to restore my phone cos there was some applications that was draining my battery
How do I restore phone and then choose Set as New?Thanks so much, got that done.
Now another set of problem. Cannot seem to sync whatsapp into my Iphone
Another problem. I have to re install my company email to my Iphone. As per company policy, I need to set up an app first - Mobile Client App (IBM Endpoint Manager Mobile Client IBM Tivoli)
Tried to install that but it has the following mesage
" Account Not in the STore"
"Your account is not valid for use in the Australian Store. You must switch to the Malaysian Store before purchasing"
How do I switch? I have checked my account details and it has only Malaysian account details. -
How to assign new categories and category set to existing Items
Hello,
This is on r12.06
We have around 9000 items in MTL_SYSTEM_ITEMS_B and now we have created a new category and category sets in Oracle inventory categories windows.
Is there any standard/seeded API, concurrent program that assigns these new categories to items in item master?
Thanks
RYou can load records into the mtl_item_categories_interface and run the "Item Category Assignment Open Interface" concurrent program.
OR you can use the INV_ITEM_CATEGORY_PUB.Create_Category api.
See http://oracle.ittoolbox.com/groups/technical-functional/oracle-apps-l/script-to-load-item-category-through-api-using-inv_item_category_pubcreate_category-api-2209973 for some sample code.
Hope this helps
Sandeep Gandhi
Independent Techno-functional Consultant -
How can I change name and password of my local network
I have just changed to the new AirPort Time Capsule. In setting up teh network and have unsed new names and now some of the HW is not working correct. How can I change name and change the passwords
Use Airport Utility and change them in the same way you set them up in the first place.
-
How to force simple tags and null attributes to appear when using SQL/XML?
Hello everybody:
I'm developing a non-schema based XMLType view.
When the XML document is generated, i noticed two things I need to manage in order to achieve the desired result:
1. Oracle generates a <tag></tag> pair for each XMLELEMENT defined; in my case, some tags need to appear as <tag/>... how do I do? Is it possible when using schema based XMLType views? Is it possible while using a non-schema approach?
2. When using XMLATTRIBUTE('' AS "attribute") or XMLATTRIBUTE(NULL AS "attribute"), no one attribute with label "attribute" and null value appears at the output; how do I force to Oracle DB to render those attributes which are with no values (needed to render those attributes as another parsing code will await for all the items)?
3. Some tip about how to route the output to an XML text disk file will be appreciated.
Thanks in advance.
Edited by: Enyix on 26/02/2012 11:21 PM
Edited by: Enyix on 26/02/2012 11:22 PMHello odie_63, thanks for your reply:
Reasons why needed single tags are these two next: Needed to generate a single XML file from 50,000,000 rows, where the XML ouput matches not only row data but another default values for another elements and attributes (not from database but using strings and types with default values); by using start and end tag, the generated file is as much twice bigger than using single tags; second, needed a very precise presentation for all the document.
For generating that document, currently focus is based on using a batch process relying on Spring Batch with using a single JDBC query where a join happens between two tables. From my point of view, that approach uses: database resources, network resources, disk resources, and processing resources, including the price of making the join, sending to network, creating objects, validating, and making the file (Expending too much time generating that XML file). That processs currently is in development.
I think possibly another approach is delegating the complete generation of that file to the database using its XML capabilities. My current approach following your recomendations is to generate a clob where I will put all the XML and putting it into a table. It leads me to another issues: Considering limitations on memory, processing and disk space, needed to append a single row-as-xml into the clob as soon as possible, and putting the clob inside the field as soon as possible, or putting the clob inside the field, and appending into it as the data is generated; so How do I manage the process in order to achieve that goals?. Seen these issues aren't related to my original question, so I'll open a new post. Any help will be apreciated.
Thanks again in advance. -
How to delete a DAC block inside a sub-block by using script?
Hello,
how can I delete a DAC block that’s inside a sub-block diagram using a script?
The command
call SCHEMELOAD("xxx")
call BlDel("yyy")
only deletes blocks that are in the highest level of the actually loaded block diagram, not blocks that are in a sub-block diagram. (DIAdem 2012)
regards,
EricHi Walter,
I don't need to delete a sub-block, I'd only like to delete blocks which are placed inside a sub-block.
All other commands I tried work for blocks no matter where they are inside a block diagram. For exaple: You can put a math formula block inside a sub-block wich is inside a sub-block which is inside a sub block and it does change the formula by script command.
But when using the command Bldel it deletes all blocks but not the ones inside a sub-block.
regards, Eric -
How to prompt user to select multiple files in file dialog using scripts
Hi, is there a way to allow user to select multiple files inside the file dialog using scripts? So not just something like "*.ai" or "*.eps" but where the user can actually use their shift key to select a batch of files inside the file dialog and then the script would process each one.
Thanks!// Main Code [Execution of script begins here]
here's what I have so far. it would also be nice to not have illustrator stop at errors.. right now, it skips dialogs but on errors, it still stops.
// uncomment to suppress Illustrator warning dialogs
app.userInteractionLevel = UserInteractionLevel.DONTDISPLAYALERTS;
var destFolder, sourceFolder, files, fileType, sourceDoc, targetFile, pdfSaveOpts, folderName;
var fullPath = "";
var finalSlash;
// Select the source folder.
sourceFolder = Folder.selectDialog( 'Select the folder with Illustrator .ai files you want to convert to PDF');
f = find_files(sourceFolder);
function find_files (dir)
return find_files_sub (dir, []);
function find_files_sub (dir, array)
var f = Folder (dir).getFiles ("*.*");
for (var i = 0; i < f.length; i++)
if (f[i] instanceof Folder)
find_files_sub (f[i], array);
else
if (f[i].name.slice (-3).toLowerCase() == ".ai" || f[i].name.slice (-4).toLowerCase() == ".eps")
//convert the array-listing to a string so we can manipulate it
fullPath = String(f[i]);
//find the position of the last / to indicate where the filename starts
finalSlash = fullPath.lastIndexOf("/");
//get the foldername by "slicing" from start to where finalSlash is located
folderName = fullPath.slice(0, finalSlash).toLowerCase();
sourceDoc = app.open(f[i]); // returns the document object
// Call function getNewName to get the name and file to save the pdf
targetFile_PNG = getNewName(".png");
if(targetFile_PNG.exists) {
} else {
pngExportOpts = getPNGOptions();
sourceDoc.exportFile(targetFile_PNG, ExportType.PNG24, pngExportOpts );
targetFile_PDF = getNewName(".pdf");
pdfSaveOpts = getPDFOptions();
sourceDoc.saveAs(targetFile_PDF, pdfSaveOpts );
targetFile_SVG = getNewName(".svg");
svgSaveOpts = getSVGOptions();
sourceDoc.exportFile(targetFile_SVG, ExportType.SVG, svgSaveOpts );
sourceDoc.close();
array.push (f[i]);
getNewName: Function to get the new file name. The primary
name is the same as the source file.
function getNewName(ext)
var ext, docName, newName, saveInFile, docName, finalDot
var loop = 0;
docName = sourceDoc.name;
ext = ext; // new extension for pdf file
newName = "";
finalDot = sourceDoc.name.lastIndexOf(".");
while(loop < finalDot)
newName += docName[loop];
loop = loop + 1;
newName += ext; // full pdf name of the file
newName = newName.replace(" [Converted]","");
// Create a file object to save the pdf
saveInFile = new File( folderName + '/' + newName );
return saveInFile;
getPDFOptions: Function to set the PDF saving options of the
files using the PDFSaveOptions object.
function getPDFOptions()
// Create the PDFSaveOptions object to set the PDF options
var pdfSaveOpts = new PDFSaveOptions();
// Setting PDFSaveOptions properties. Please see the JavaScript Reference
// for a description of these properties.
// Add more properties here if you like
pdfSaveOpts.acrobatLayers = false;
pdfSaveOpts.colorBars = false;
pdfSaveOpts.colorCompression = CompressionQuality.AUTOMATICJPEGHIGH;
pdfSaveOpts.compressArt = true; //default
pdfSaveOpts.embedICCProfile = false;
pdfSaveOpts.enablePlainText = false;
pdfSaveOpts.generateThumbnails = false; // default
pdfSaveOpts.optimization = true;
pdfSaveOpts.pageInformation = false;
pdfSaveOpts.preserveEditability = true;
return pdfSaveOpts;
function getSVGOptions()
var svgSaveOpts = new ExportOptionsSVG();
//just using defaults aside from what's written below
//see http://cssdk.host.adobe.com/sdk/1.0/docs/WebHelp/references/csawlib/com/adobe/illustrator/ ExportOptionsSVG.html
svgSaveOpts.embedRasterImages = true;
svgSaveOpts.sVGTextOnPath = true;
return svgSaveOpts;
function getPNGOptions()
// Create the PDFSaveOptions object to set the PDF options
var pngExportOpts = new ExportOptionsPNG24();
// Setting PNGExportOptions properties. Please see the JavaScript Reference
// for a description of these properties.
// Add more properties here if you like
pngExportOpts.antiAliasing = true;
pngExportOpts.artBoardClipping = false;
pngExportOpts.horizontalScale = 100; // scaling to 350%
pngExportOpts.saveAsHTML = false;
pngExportOpts.transparency = true;
pngExportOpts.verticalScale = 100; // scaling to 350%
return pngExportOpts; -
How to change print size and DPI setting in Aperture
If I import a raw image from my camera (D2X) to Aperture and print the image at about 8"x10" through Aperture, it prints at about 300 DPI, if I change to size of the same image to 12"x18", in Aperture, it prints the image at about 166 DPI. I do not believe there is a way to change this in Aperture.
My question is, can I open the image at 8"x10" in PS, change the size and resolution to 12"x18" and 300 DPI then save it, open it again in Aperture and print it. If I do these things, will the image printed in Aperture still be 300 DPI and how can I check it to see if that is the case?
I have not been able to find the DPI setting anywhere in Aperture to confirm that it is what I want or need."You can make the pixels bigger by making the image larger but you can't add any more pixels without running some kind of interpolation filtration like GenuineFractals or a recomputation like bicubic."
Thank you for your explanation and that brings me exactly to the point of my question.
Can I interpolate my original NEF raw image after conversion by Aperture to a much larger image for print using something similar to what Photoshop does with it's bicubic smoother or as is done in genuine fractals or must I go out of Aperture and back if I want to print with Aperture. I am hoping you will tell me that Aperture is or will be capable of interpolating an image to a larger one with more than just the pixels supplied by the camera. I do not belive that these are not enough by themselves to print a quality image in a much larger size.
I may be wrong, but I believe that it is somewhat common practice to interpolate an image to get a greater resolution printed image at a size larger that what is possible with a resolution provided by the (D2x in my case) DSLR camera.
Or is this just a tempest in a teapot. In other words, will I be able to take the image out of the D2x (12.5 megapixels) and print a 13x 19" image with the same quality in Aperture (uninterpolated but enlarged) as an interpolated image in PS or Genuine Fractals and then in PS?
Thank you -
Problems with verifying email address and SMTP set...
I have recently moved over to BT Infinity Broadband and regularly work from home. Recently I have been unable to send work emails (provided by 123 Reg) and having searched the forums I found a solution by using ny btinternet login details and verifying my email address.
However I have been able to verify two of my work email addresses but not the main and most important one. Each time I try I get an "invalid email address" error message. This is not causing too many problems with Outlook 2010 as I can still send and receive emails at present, hopefully this will remain.
However I do also use a case management software which sends emails. It requires a SMTP server details and port number. I have replicated these with the ones from Outlook, mail.btinternet.com and port number 465 but I am unable to send any emails.
I would be grateful if anybody could help me to verify my email address and also suggest what settings I would need for my case management software.
Many Thanks,
WillI am a BT Premium Mail customer for my BT Talk21 e-mail account.
All was working fine on my PC and on my Mobile when I left the UK on 18t Sept.
In Greece, I was accessing e-mails, and responding to them, via the COSMOTE mobile network.
The problem started around 1st October, when I found that I could not reply to e-mails via my phone ("Sending Failed") - it would sometimes work if I switched my phone off an back on again, but I just couldn't send e-mails from my Android phone.
On my return to the UK, on 3rd Oct, I found that I couldn't send e-mails via my Outlook 2010 client on my Windows 7 Computer, directly connected to my router- getting error message 522 (account set up as POP3)
Test message returns:
"Send test e-mail message: Your outgoing (SMTP) e-mail server has reported an internal error. If you continue to receive this message, contact your server administrator or Internet service provider (ISP). The server responded: 522 Your message has not been sent as you are accessin"
So, 2 separate devices, connected differently, where experiencing the same problem - the commonality BT E-mail severs.
I spent 2 days of absolute hell with BT's Indian call centres who were worse than useless - refusing to accept that this was a BT sever-related issue.
VOL 012-*********** – 4th Oct
VOL 012-*********** – 4th Oct
On my Mobile, as a test, I deleted my (POP3) mobile account on my phone, the idea to re-instate it.
On trying to set it up again, the BT mails servers wouldn't allow me to set it up as POP3 (even though up until the point of the problem it was POP3).
However, it eventually allowed me to set it up as SMTP/IMAP - and I can now send and recieve e-mails on my Talk21 account on my mobile. Although, being IMAP/SMTP it now deletes mails off the server if I delete them on my phone - which I found out the hard way.
My Outlook client on my computer still cannot send e-mails - returning the error code 522.
I have also accessed my account via webmail (which seems to work both ways) and have changed and verified my passwords, but the problem still exists.
In addition, my daughter also has a Talk21 Premium Mail account, and accessing via a different computer Microsoft Mail on a Vista machine, and she is experiencing the same problem.
I find out today that BT is withdrawing from Yahoo and is changing/has changed it's e-mail systems.
The problems I and my daughter are experiencing appear to be general BT Mail Server problems that need to addressed centrally, and not a single-user level as the likelihood is that many are affected.
I would like BT to look into this as a matter of urgency. -
How to verify that ocr and votingdisk is normal??
Hi. all.
I am new to Oracle clusterware.
How to verfiy that oracle clusterware is running without problems??
I am reading RAC Administration Guide, but there are so many commands
about Oracle Clusterware.
I would like to hear your experience and advice.
Thanks in advance.
Best Regards.Dear Virag.
I recreated a database by using DBCA on a 2-node RAC database.
I got no errors from DBCA when I recreated the database.
Now, I am just testing whether or not everything is OK.
The operating system is windows2003.
The version of clusterware and oracle is 10.2.0.2.0.
I intentionally rebooted one node by turn.
After rebooting, 2-node RAC database is up automatically some times,
but some times, the instance of the rebooted node does not startup
automatically. "srvctl start instance" does work.
Is this problem related to the master node of cluster??
I am home now. I will give you the crsd log tomorrow.
Best Regards.
Maybe you are looking for
-
I have a standalone computer that can't be connected to the internet. How do I setup my itunes and connect my Ipad. I'm currently operating a Windows 7 OS (64bit) and an iPad device.
-
Extend vendors to a new company code
Hi, We are creating a new company code and I want to know whether there is any standard transcation code to mass create the vendors master from the existing company code to the new company code without any BDC or LSMW. Thanks, SS
-
Ok so I have a 2009 27" IMac. I already had a OEM copy of Win 7 partitioned and running perfectly fine for months. Recently I was sent a message from Apple about needed to bring comp in to get a possible faulty HD swaped out. I bought a Time Capsule
-
How can i translate a pdf document in japanese language to english language
how can i translate a pdf document in japanese language to english language
-
Have been successfully using RAW and DNG conversion with Canon 20D in CS3. New Canon 5D Mark II. No longer able to covert to DNG or open RAW files. Have downloaded updates RAW 4.6 and corresponding DNG converter that are supposed to work in CS3. Stil