How to verify Security Update (QuickTime 7.1.6) is installed

Hi,
I manually installed Security Update (QuickTime 7.1.6) for Windows but I am not sure how to verify whether the update successfully installed or not. Is there any way we can check that the update is installed? Maybe file version? Hopefully someone can help.
Thanks,
ren47774
Windows 2000
Windows 2000

If you install QT 7.1.6, it says 7.1.6 in the help screen. If you install the newly released security update, nothing changes to show the security update has been applied. It still says 7.1.6 in the help screen. Even running the patch manually, it gives no indication it has successfully installed.
I am required to install this patch on about 200 clasroom machines but have no way to verify which ones get the patch and which don't. Apparently I can't even go around to each of them and manually verify.

Similar Messages

Security Update (QuickTime 7.1.6) has an invalid signature. Not installed.

I installed QuickTime 7.1.6 on XP Pro SP2. I chose the option to make it available to All Users. I am now logging in on the same account that I used to perform the installation. That account is an Administrator account.
When Apple Update runs on my new QuickTime installation, it says a Security Update is available, plus iTunes. I uncheck iTunes and proceed with the security update. It gives me this error message:
Security Update (QuickTime 7.1.6) has an invalid signature. It will not be installed.
I tried Tools > Download Only and it fails with this message:
Security Update (QuickTime 7.1.6) has an invalid signature. The download has been removed.
I tried manually downloading the security update directly from the Apple site. I get the full download no problem. When I run the msi package, I get this message:
The system administrator has set policies to prevent this isntallation.
Reading posts on this forum, I looked at registry keys and permissions. The HKLM\SOFTWARE\Classes\QuickTime.QuickTime key owner was Administrators. The owner of the QuickTime keys under HKLM\SOFTWARE\Apple Computer, Inc.\QuickTime is Kevin (me, also an Administrator). I modified QuickTime.QuickTime so Kevin is the owner, made sure it trickled down to all subkeys, and the problem persists. No change in behavior.
What do I do now?

What was this "other" update that installed sucessfully? I noticed that you are still using OS10.4.7.
Did you repair permissions prior & after the installation? If not, suggest that you do so & try to install QT again. Make sure you repair permissions after the installation.

OS X cannot verify Security Update 2007-009, refuses to install

I keep trying to install the latest Security Update. It tells me to restart, so I do. The computer restarts and it begins to install, then I get a message that reads:
"The update 'Security Update 2007-009' can't be installed. The installer could not validate the contents of the SecUpt2007-009 package. Contact the software manufacturer for assistance."
This has happened about 5 times now. Any ideas?

+The computer restarts and it begins to install+
The restart happens after the install is complete, not before ... it sounds like you might have a corrupt disc image so I'd just download a fresh copy from here (link below) then mount the .dmg file, then double-click on the installer package.
http://wsidecar.apple.com/cgi-bin/nph-reg3rdpty2.pl/product=16527&cat=57&platfor m=osx&method=sa/SecUpd2007-009.dmg

How do I verify the security update for 7.1.6 is installed?

I have over 200 classroom PCs I need to install the security patch linked below on. How can I verify it's correctly installed since there is no visible change to the software, not even on the Help-About screen.
http://docs.info.apple.com/article.html?artnum=305531
(This is for Quick time for Windows)
Windows Windows XP Pro

If you install QT 7.1.6, it says 7.1.6 in the help screen. If you install the newly released security update, nothing changes to show the security update has been applied. It still says 7.1.6 in the help screen. Even running the patch manually, it gives no indication it has successfully installed.
I am required to install this patch on about 200 clasroom machines but have no way to verify which ones get the patch and which don't. Apparently I can't even go around to each of them and manually verify.

Is there a consensus on how to solve security update issues?

hi,
i'm writing to you from a PPC G4 (AGP graphics) that will self-destruct by the time i switch off and (attempt) to re-start tomorrow. i will then need to do a re-install, just to see if i have gotten any replies (grinds teeth to the root). it will probably be my 8 th re-install in the past month. i just can'st takes no mores, Cap'n
<exasperation>deep breath... each time i have done a clean install, zero-ed all data when erasing (7 times over, on this occasion), repaired permissions before and after each software update, and followed every advice i could find via google to pre-empt another "Error: underlying task reported failure on exit" and the inevitable hanging grey screen; i have earned nothing but another Disk Utility report of the same problem. my HD seems to be OK - Disk Utility and Disk Warrior both say it's "verified" by SMART (although i've read this could be no assurance...). it's 40 GB, nothing else installed but NetBarrier; nothing saved on it (just 3GB of OS).
i've searched this forum over the last weekend and come across a diverse range of methods in resolving software update issues. i have tried downloading the security update and safari 3.2 directly from the site and bypassing Software Update- to no avail (but noticed that they are quite larger in MB than via Software Update??).
the one suggestion the intrigued me was installing the update via Terminal. why would this be any different? the worst thing about this is that there is no universal way that'll work for all, just individual solutions for different macs??? could my problem be exacerbated by using the double layer (double the permissions to fix?) of a Panther OS with Tiger Upgrade disk?
when i last tried to resolve the "error" with safe mode, fsck and DU Repair Disk/Permissions, which initially failed, i resorted to Disk Warrior, which re-built the directory, and "fixed" the HD. when i re-tried fsck it said the HD was "ok", but i still had the "error: underlying task..." on DU?
is there an issue with the Security Update oo8 because it's PRIMARILY for 10.5 and not Tiger? why have some encountered this problem and others escaped any seeming conflicts ? is this problem also caused by JAVA updates (there are, after all, 4 updates!)
more importantly, WHAT CAN I DOOOOOOOO?
thank you

looking at your suggestion to check /Library/Startup items in the concurrent thread ("Help needed after installing Security Update 2008-008"), i recalled that the only thing i have in this file system is 3 folders concerning Intego, NetBarrier and Virus Barrier. one of these contains the NetBarrier x4 daemon which has no image, just the apple "pencil, ruler, pen on paper" "A" image. i don't think it correctly downloaded, but this the case in every instance.
i'm running netbarrier x4 10.4.5 updated and downloaded on installation. intego Support says that there should be nothing in my "Startup/Login items". i thought they meant Login items (users>login items) because when i take the folders out of my "/Library/Startup items", NetBarrier fails to "initialize".
intego is now on newtbarrier x5, but they say x4 is fully compatible with Tiger???
my baby maybe getting on, but it's strong enough, i just need to know what's bugging it!

Replaced crashed computer with new one. How do I secure a serial number for my re-installed CS3 program obtained while as a student at Dixie State University with a coupon code of HL1A-003B-L2A0? Trial expires in 7 days.

My old computer, which had CS3 installed, crashed and I had to replace the computer. We re-installed the CS3 program on the new computer, and the prompt calls for a serial number, which we do not have. I obtained the original CS3 while registered as a student at Dixie State University. The Coupon Code is: HL1A-003B-L2AO. There are only 7 days remaining on the new trial period. I e-mailed Adobe requesting a serial number several days ago, but have not received a response. How do I secure the serial number? Rollo B.

Hi.\
Welcome to the Photoshop user to user forums. Since we are not Adobe employees, we can't fix serial number and activation problems. Only Customer Care can do this.
Contact Customer Care
Gene

Security Update 2007-002 Won't Stay Installed

Hello All-
I've been trying to download/install Security Update 2007-002 without success. I have tried about 4 different times to no avail. Every time I do download the update, install it and then restart my computer, it's still shows up in my Software Updates that need to be downloaded. Any ideas as to what's going on? TIA!!

Many thanks, Bill!
Your hint did work for me! I tryed before to follow the tip at VersionTracker (use Pacifist to extract iChat from the 10.4.8-Combo-updater to replace the language-stripped iChat I had), but that failed. The resulting version of iChat after running 2007-002 reported to be 3.1.7, but crashed at start. Probably because the iChat in the 10.4.8-Combo-updater is Version 3.1.5, and this version also crashes without the update.
In my case, iChat 3.1.6 had only the German and English language files. I use Macaroni to strip unused languages.
The question that remains is: Can I strip the languages from iChat 3.1.7, or will that result in a crash?
G5-2x1.8, 2 GB RAM, additional internal 250 HD Mac OS X (10.4.8) MBP 2GHz Intel Core Duo

HT201366 Security Update 2013-003 keeps failing to install - 'Unexpected Error occurred' - and now my MacBook Pro is running extremely slowly?

I have repeatedly tried to update the software 'Security Update 2013-003' on my MacBook Pro OS X Version 10.7.5 but it keeps failing to install, stating that 'an Unexpected Error Occurred'.
Since the update failed the first time, my MacBook Pro has been running extremely slowly and failing to open basic apps like Mail and Safari at times.
All other updates have been successful apart from this one. I have made sure that my MacBook isn't full (emptied Trash etc) but it still runs really slowly at times so I think it's linked with the Security Update failure.
Please help!
*I have tried installing the update from Support Downloads but it says there isn't space on Macintosh to install it. There is 190 GB of free space on that disk so I don't understand that at all.
LION system.

I have tried and it downloads successfully but when I install it, it comes up with this:

Security update 2015-003 1.0 not installing.

security update 2015-003 1.0 won't install.

Hi ;
I have the same worries, it freezes during installation ?
Look on my post: ==> Update 2015-003 1.0 does not install..

How do you secure updates to Robohelp packages?

Hello all,
I'm building a knowledgebase type application for our technical group to take out to the field where there is sometimes little to no mobile data signal. Robohelp seemed to fit the bill with it's AIR packaging ability, and I have commenting and auto online update notifications and installation working.
The issue I'm running into is this:
If a person who has left the company still has the program, or made a copy of the original .AIR installation file, they will forevermore get online updates.
I have thought about putting the online update .xml and .air file in a password protected area, but that would mean the automatic update check would obviously fail since it's being asked for login credentials. I don't see any options for password protecting the AIR application either.
What are my options? Any ideas on how I might accomplish this?
We do have a secured company website area that employees with proper credentials can access. I do have webspace that can support basic unencrypted or encrypted authentication. I do not want to go a VPN route because the VPN access is terribly slow, and the knowledgebase application is 200+MB.
Is there a way I can make the user log in to a website through the AIR help application, and then trigger the AIR app to check for an update?
Thanks in advance,
--Hans

Fix the VPN connection.
Sorry but what you need is a feature change and pending that, there's nothing else I can think of.
Please follow this link to submit a feature request.
http://www.Adobe.com/cfusion/mmform/index.cfm?name=wishform&product=38
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

How to verify software update?

I recently purchased a MacBook Pro, and did a successful fire wire brain transfer from my Powerbook. In the course of setting up my MacBook, I tried Software Update several times, and each time got a message that it couldn't find the update server. My network connection is working fine. This has now been going on for several days, and I doubt that the update server has been down that whole time. I'm experiencing the same thing with my Powerbook, which I've successfully updated numerous times with Software Update. I'm wondering if a configuration file got corrupted on the Powerbook, and then was transferred in corrupted state to the MacBook. What sort of sanity checks can I do at this point? Thanks!

My question doesn't concern so much the process of updating one computer from another as how to diagnose the problem when Software Update perpetually reports a network problem. Does anyone have any insights on how I might diagnose this, given that it's been five days now, my network seems fine, and I have no firewalls? The added information that I can give is that I have not yet succesfully done any software update from my new MacBook, after five days. Thanks!

How to verify "security authentication failure rate" command

i type "security authentication failure rate 2 log" in global configuration mode,then login authentication failed many times but no the 15-second delay.
why?Thanks.

Steven,
This command did NOT come in play till 12.3.1
Command History
Release
Modification
12.3(1)
This command was introduced.
12.2(27)SBC
This command was integrated into Cisco IOS Release 12.2(27)SBC.
12.3(7)T
The range of the threshold-rate value was changed from 1 through 1024 to 2 through 1024.
Usage Guidelines
The security authentication failure rate command provides enhanced security access to the router by generating syslog messages after the number of unsuccessful login attempts exceeds the configured threshold rate. This command ensures that there are not any continuous failures to access the router.
Regards,
Alex.
Please rate useful posts.

How can I get security updates without dealing with Firefox 4 update reminders?

I tried Firefox 4 for awhile, hated it and reloaded 3.6. I keep getting reminders to update to 4 which are bothersome. I have disabled reminders, but how can I continue to get security updates without upgrading to 4?

Install Secunia's free Personal Software Inspector: http://secunia.com/vulnerability_scanning/personal
You also need to update Flash a.s.a.p. The version you're running right now is a security risk. See http://www.adobe.com/support/security/advisories/apsa11-02.html
Update via http://get.adobe.com/flashplayer/
Also, update Firefox to 3.6.17 because there was a security breach at Comodo which is an SSL certificate provider recently whereby a number of fraudulent certificates were inadvertently issued. These allow a hacker to impersonate any site including online banking and the Firefox version you're running at the moment will not warn you that the site is a fake. The fraudulent certificates were blacklisted in v3.6.17 and beyond.
See http://blogs.comodo.com/it-security/data-security/the-recent-ra-compromise/

Cannot install Security Update 2007-009 "could not verify contents ..."

My system:
Mac Pro dual Quad-Core 3Ghz 7GB Ram
Boot ROM Version: MP21.007F.B06
SMC Version: 1.15f3
When running software update, I get this notice:
The update "Security Update 2007-009" can't be installed.
The Installer could not validate the contents of the "SecUpd2007-009" package. Contact the software manufacturer for assistance.
I have no phone support for this mac, so "contacting software manufacturer" leave me few options. Google search returns nothing, search on this forum returns nothing, so hopefully my issue reaches someone who can advise me on how to solve this problem. Reinstalling the system software, IMO, is not a resolution.
Thanks for your time

Welcome to Discussions!
I would suggest downloading the Security Update file separately and try installing it that way. You can get the Leopard-compatible version HERE. Once installed, Software Update will stop trying to install it and generating the error message.
-Douggo

Updated Quicktime...now Mail won't open

I updated quicktime yesterday and immedately afterwards Mail would not open anymore. It just bounces (usually just once) and then nothing. Anyone know how to fix this or how to revert to the previous version of quicktime?

Actually, I have it on very good authority (Apple
person) that you can install the combo 10.4.6 update
and it will not step on SecUpd 2006-003 components
I cannot believe this. The Mac OS X 10.4.6 Combo Update would certainly overwrite files installed by the Security Update 2006-003 (e.g. Safari). Could this be a misunderstanding? The Security Update 2006-003 does not touch anything in the Mail.app bundle, could this be what that person really meant? I'm pretty sure reinstalling the Security Update 2006-003 is necessary if the Mac OS X 10.4.6 Combo Update is reinstalled on a system where the Security Update 2006-003 had already been installed.
Also, I don't think that the Combo will alter the QT status.
EDITED: I agree with you on this, but I'm not sure, so I thought it would be appropriate to be on the safe side and take that possibility into consideration.
I suspect it is the Mail program that got damaged
I don't think so. According to the Console error messages, Mail crashes right upon start up because there is something amiss in /System/Library/Frameworks/.
Not sure QT re-install is needed.
It could very well be that properly reinstalling the QuickTime update fixes whatever went awry in /System/Library/Frameworks/ during the first attempt. If not, then reinstalling the Combo Update will be necessary, indeed.
I'll try installing the QuickTime update myself tomorrow (today here :-)) to see what happens.
Regards.

How to verify Security Update (QuickTime 7.1.6) is installed

Similar Messages

Maybe you are looking for