How to verify Solaris 9 Operating Environment 12/03  zip file downloaded?

Solaris 9 SPARC Platform
Required (These files must be downloaded for the product to work.)
Solaris 9 Installation CD, English (sol-9-u5-install-sparc.zip, 347.42 MB)
Solaris 9 Software 1 of 2 CD, English (sol-9-u5-sparc-v1.zip, 380.99 MB)
Solaris 9 Software 2 of 2 CD, English (sol-9-u5-sparc-v2.zip, 423.56 MB)
Optional (Download the following files to add more functionality or learn more about this product.)
Solaris 9 Languages CD, Multi-language (sol-9-u5-lang-sparc.zip, 437.04 MB)
Solaris 9 Documentation CD 1 of 2, English (sol-9-u5-doc-v1.zip, 273.16 MB)
Solaris 9 Documentation CD 2 of 2, English (sol-9-u5-doc-v2.zip, 270.74 MB)
How can I verify the downloaded zip files? Where to find the md5sum or somthing else ?
Thanks.

Hello,
if you just want to verify if the ZIP-files are not damaged, just use the test-option of the used program to extract the iso-files from the ZIP-archive. But if they are damaged it's impossible to extract them anyway.
If you are asking for a way to check if the contents has been tampered, sorry I'm not aware of any for this particular situation.
Michael

Similar Messages

  • How to open .zip files downloaded

    I've downloaded a number of zip files using Firefox Mobile, first clicking on the "Open" button after clicking on the link to the zip file (it didn't work) , and clicking "Save" and after downloading trying to click "Open" (it didn't work either).
    How do I open zip files downloaded with Firefox for Mobile? And where are they stored when saved?
    == Extensions installed: ==
    Weave Sync

    hi i m salim dhannani from india and i want to contack with you so plz contack with me , and i want shoes buckles if you have tahn plz send me

  • How can I install attachments for SAP notes with zip-files ???

    How can I install attachments for SAP notes with zip-files ???

    Can you elaborate on your question? How exactly is your question related to SAP NetWeaver Portal: Application Integration? If you are really asking how to install attachments contained in SAP notes, there is no automatic/general way and you should ask your question in the Software Support and Maintenance space to begin with. What SAP note(s) are you looking at installing?

  • How to make Solaris 10 Operating System 11/06 CD install onto a PC

    I have the Solaris 10 Operating System 11/06 CDs from Sun.
    I am now trying to install the O/S onto a new internal HDD.
    Powering up with the first CD (03-104927-01) in the drive, the monitor reports "DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER".
    Is not the CD a system disk?
    How do I install Solaris from the CDs?
    Additional information:
    BIOS Setup information:
    IDE Channel 0 Master - HDD
    IDE Channel 4 Slave - DVD
    Thanks for the help

    In your first post you discuss CDs (plural) as if you have the 4-disk or 5-disk set.
    You do mention that the optical drive is a DVD.
    Now you describe the optical media as being DVDs.
    In the future, you need to be precise with details if you hope for `remote` assistance, such as in an Internet discussion forum.
    I can only guess that your desktop computer's drive just has some occasional issues with various media.
    Perhaps it is old and has issues reading the specific position where DVD boot sectors might be.
    Booting from media has no relationship with what might already be installed.
    Your laptop is likely newer with a fully capable drive.
    That laptop optical drive might be better able to read DVD boot sectors.
    I see two alternatives left to you.
    Replace the drive, even if only temporarily with a borrowed drive...
    else...
    Download and burn the CD variety of Solaris.
    [http://www.sun.com/software/solaris/releases.jsp]

  • How can i stop sending my mail as a zip file

    new to macbook air, having problems as I seem to only send out my docs in a zip file and do not know how to send then as pages or word or text file???

    Buddy seems to have a workaround posted on his blog http://www.lawryk.com/_blog/My_Adobe_Blog/post/Workaround_for_Opening_ Your_Proto_Files_in_Dreamweaver/
    Plus adobe is working on a better solution

  • How does System.out.println(). Work inside src.zip file !

    Hello guyz,
    I was just wondering how System.out.println() worked so i opened up the src.zip file and checked the source code. But could not understand it. As written i remember
    "out is an object encapsulated in the System class."
    Thats ok. But i could not understand the code.
        public final static PrintStream out = nullPrintStream();
        private static PrintStream nullPrintStream() throws NullPointerException {
         if (currentTimeMillis() > 0) {
             return null;
         throw new NullPointerException();
        }Also when i ran the DJ Decompiler it decompiled it to this:
    public class One
         public static void main(String args[])
              System.out.println("hello world");
    import java.io.PrintStream;
    public class One
        public One()
        public static void main(String args[])
            System.out.println("hello world");
    }Also, why does it need to import PrintStream ?

    Peter__Lawrey wrote:
    I was just wondering how System.out.println() worked so i opened up the src.zip file and checked the source code.This value is a place holder. This value is changed as soon as enough of the JVM is initialised for printing to work.
    Also, why does it need to import PrintStream ? It doesn't, but it is used in the code so DJ is including it just in case.Sorry,
    But i don't understand at all.

  • Anybody knows how to verify USB link operation using Labview

    I am trying to verify the operation of a USB link on a system I am testing. Does Labview have USB drivers that provide data communication.

    hamid00 wrote:
    >
    > I am trying to verify the operation of a USB link on a system I am
    > testing. Does Labview have USB drivers that provide data
    > communication.
    No.
    Using LabVIEW, the best way might be to verify the operation of a device
    on the other end of the link ...
    Best, Mark

  • How to properly use ProgressEvent's bytesLoaded and bytesTotal for file download

    Hi All,
    I am using Flex 4, Actionscript 3.
    I am using FileReference's download method, which automatically opens  the "Save As" dialog window (ie. I don't have to explicitly call browse  like for an upload).
    I'd like the label of my ProgressBar component to display
    downloading <%> ...
    In my ProgressEvent handler, I tried
    Code:
         prgbr_fileDownload.label = "downloading %3%%...";
         prgbr_fileDownload.setProgress( event.bytesLoaded, event.bytesTotal );
    But this just displayed "downloading ...". I already set the mode of my ProgressBar component to "manual".
    I then tried
    Code:
    prgbr_fileDownload.label = "downloading " + Math.round( ( event.bytesLoaded/event.bytesTotal ) * 100 ) + "% ...";
    And I was shocked to see very large numbers.
    I then noticed my trace statements displaying the following:
    Code:
    progressHandler name = g2.zip bytesLoaded = 98304 bytesTotal = 98304
    progressHandler name = g2.zip bytesLoaded = 196608 bytesTotal = 98304
    progressHandler name = g2.zip bytesLoaded = 377421 bytesTotal = 98304
    etc.
    progressHandler name = g2.zip bytesLoaded = 17820389 bytesTotal = 98304
    progressHandler name = g2.zip bytesLoaded = 17829381 bytesTotal = 98304
    progressHandler name = g2.zip bytesLoaded = 17838373 bytesTotal = 98304
    etc.
    progressHandler name = g2.zip bytesLoaded = 29940557 bytesTotal = 98304
    progressHandler name = g2.zip bytesLoaded = 30012485 bytesTotal = 98304
    progressHandler name = g2.zip bytesLoaded = 30103874 bytesTotal = 98304
    Hence, obviously my last computation would not work.
    How can I get the percentage downloaded to be displayed correctly?
    Thanks,
    Bonnie

    Hello,
    You're already using it correctly on first try (assigning bytes loaded, bytes total to relevant progress bar instance should update correctly setup label to display percentage as ProgressBar *has* that kind of logic already built-into its code). Are you following that tutorial maybe?
    http://livedocs.adobe.com/flex/3/html/help.html?content=17_Networking_and_communications_9 .html
    It does its job as I quickly tested - and it shows how to setup ProgressBar label to *percentage* option - which is computed by component itself.
    To compute percentage you compare current value (which should be less or equal) to expected "total" bytes value:
    http://en.wikipedia.org/wiki/Percentage
    No magic here - the only issue that people could face is that sometimes "bytesTotal" is reported with wrong value (e.g. zeor) as server does not set correct "Content-Length" value (but I nearly 100% sure that is not in your case).
    If you have issue with your example url server just use established content for testeing, e.g. nasa.gov hosted image (it never tricked me):
    http://www.nasa.gov/images/content/566830main_201107060001HQ_full.jpg
    (I'm using nasa.gov imagery for download tests as they are providing hi-res content which is fun to look into as well),
    regards,
    Peter

  • How to update the codec on laptop 2 open my files downloaded from camcorder

    I recently purchased a Sony HDR-TG7VE Camcorder and have downloaded the software for this onto my laptop, however after downloading the movie clips onto my laptop I am unable to open the files.
    I contacted Sony and they said it is a problem with my laptop and I need to contact Toshiba to update the Codec.
    The message I am getting is "Windows cannot open this file. To open this file windows needs to know what program you want to use to open it. Windows can go online to look it up automatically or you can manually select from a list of programs installed on your computer.
    what do you want to do - use the web service to find the correct program
    - select a program from a list of installed programs"
    I am using windows vista business 32 bit operating system.
    The camcorder is an HD camcorder.

    It is really irresponsible to get such answer from cam manufacturer.
    They offer product and they must support you with this. it is logic that recorded files should be open on every PC desktop or notebook.
    Following their logic everyone who hast this cam and want to watch movies on PCs must contact PC manufacturers for support. It is really crazy.
    I don't know nothing about this cam but usually you should have some software dist with software that can help you to watch the movies or maybe to convert the files in other format and watch the movies with standard players like Windows media player or VLC player.

  • HT2731 How to verify apple ID

    How to verify APPLE ID from app store so I can download apps

    The verification email will have been sent to the email account that you put as the primary email address on the account - log into that email account as you usually do and you should have an email from Apple.

  • How to verify ?

    How to verify wether below software/packages are installaed on Sun Solaris SPARC
    1) Maitenance Utilities like - ar, ld, make
    2)Sun ONE Studio 8 (C and C++ 5.5)
    3)J2SE Solaris Recommended Patch Cluster

    1) Maitenance Utilities like - ar, ld, makeThese utilities exist under /usr/ccs/bin/ directory, use the which command to verify that "which ld", "which make", ..etc.
    2)Sun ONE Studio 8 (C and C++ 5.5)
    3)J2SE Solaris Recommended Patch ClusterTo determine whether an operating system patch is installed, enter a command similar to the following:
    # /usr/sbin/patchadd -p | grep <patch_number>Get the list of patches included in the "Sun ONE Studio 8" and "Recommended Patch Cluster" of your OS version from:
    Sun ONE Studio 8 Compiler Collection Patches
    http://developers.sun.com/sunstudio/downloads/patches/s1s8cc_patches.html
    SunSolve Patch Access
    http://sunsolve.sun.com/show.do?target=patch-access

  • HT1338 Purchased a used macbook pro with Mountain Lion. My old Mac runs Snow Leopard is backed up to Time machine. How do I register the operating system to me and how do I use Time Machine to move my files to the new used computer?

    Purchased a used macbook pro with Mountain Lion. My old Mac runs Snow Leopard is backed up to Time machine. How do I register the operating system to me and how do I use Time Machine to move my files to the new used computer?

    If you look at the User Tips tab, you will find a write up on just this subject:
    https://discussions.apple.com/docs/DOC-4053
    The subject of buying/selling a Mac is quite complicated.  Here is a guide to the steps involved. It is from the Seller's point of view, but easily read the other way too:
    SELLING A MAC A
    Internet Recovery, and Transferability of OS & iLife Apps
    Selling an Old Mac:
    • When selling an old Mac, the only OS that is legally transferable is the one that came preinstalled when the Mac was new. Selling a Mac with an upgraded OS isn't doing the new owner any favors. Attempting to do so will only result in headaches since the upgraded OS can't be registered by the new owner. If a clean install becomes necessary, they won't be able to do so and will be forced to install the original OS via Internet Recovery. Best to simply erase the drive and revert back to the original OS prior to selling any Mac.
    • Additionally, upgrading the OS on a Mac you intend to sell means that you are leaving personally identifiable information on the Mac since the only way to upgrade the OS involves using your own AppleID to download the upgrade from the App Store. So there will be traces of your info and user account left behind. Again, best to erase the drive and revert to the original OS via Internet Recovery.
    Internet Recovery:
    • In the event that the OS has been upgraded to a newer version (i.e. Lion to Mountain Lion), Internet Recovery will offer the version of the OS that originally came with the Mac. So while booting to the Recovery Disk will show Mountain Lion as available for reinstall since that is the current version running, Internet Recovery, on the other hand, will only show Lion available since that was the OS shipped with that particular Mac.
    • Though the Mac came with a particular version of Mac OS X, it appears that, when Internet Recovery is invoked, the most recent update of that version may be applied. (i.e. if the Mac originally came with 10.7.3, Internet Recovery may install a more recent update like 10.7.5)
    iLife Apps:
    • When the App Store is launched for the first time it will report that the iLife apps are available for the user to Accept under the Purchases section. The user will be required to enter their AppleID during the Acceptance process. From that point on the iLife apps will be tied to the AppleID used to Accept them. The user will be allowed to download the apps to other Macs they own if they wish using the same AppleID used to Accept them.
    • Once Accepted on the new Mac, the iLife apps can not be transferred to any future owner when the Mac is sold. Attempting to use an AppleID after the apps have already been accepted using a different AppleID will result in the App Store reporting "These apps were already assigned to another Apple ID".
    • It appears, however, that the iLife Apps do not automatically go to the first owner of the Mac. It's quite possible that the original owner, either by choice or neglect, never Accepted the iLife apps in the App Store. As a result, a future owner of the Mac may be able to successfully Accept the apps and retain them for themselves using their own AppleID. Bottom Line: Whoever Accepts the iLife apps first gets to keep them.
    SELLING A MAC B
    Follow these instructions step by step to prepare a Mac for sale:
    Step One - Back up your data:
    A. If you have any Virtual PCs shut them down. They cannot be in their "fast saved" state. They must be shut down from inside Windows.
    B. Clone to an external drive using using Carbon Copy Cloner.
    1. Open Carbon Copy Cloner.
    2. Select the Source volume from the Select a source drop down menu on the left side.
    3. Select the Destination volume from the Select a destination drop down menu on the right
    side.
    4. Click on the Clone button. If you are prompted about creating a clone of the Recovery HD be
    sure to opt for that.
    Destination means a freshly erased external backup drive. Source means the internal
    startup drive. 
    Step Two - Prepare the machine for the new buyer:
    1. De-authorize the computer in iTunes! De-authorize both iTunes and Audible accounts.
    2, Remove any Open Firmware passwords or Firmware passwords.
    3. Turn the brightness full up and volume nearly so.
    4. Turn off File Vault, if enabled.
    5. Disable iCloud, if enabled: See.What to do with iCloud before selling your computer
    Step Three - Install a fresh OS:
    A. Snow Leopard and earlier versions of OS X
    1. Insert the original OS X install CD/DVD that came with your computer.
    2. Restart the computer while holding down the C key to boot from the CD/DVD.
    3. Select Disk Utility from the Utilities menu; repartition and reformat the internal hard drive.
    Optionally, click on the Security button and set the Zero Data option to one-pass.
    4. Install OS X.
    5. Upon completion DO NOT restart the computer.
    6. Shutdown the computer.
    B. Lion and Mountain Lion (if pre-installed on the computer at purchase*)
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because
    it is three times faster than wireless.
    1. Restart the computer while holding down the COMMAND and R keys until the Mac OS X
    Utilities window appears.
    2. Select Disk Utility from the Mac OS X Utilities window and click on the Continue button. 
    3. After DU loads select your startup volume (usually Macintosh HD) from the left side list. Click
    on the Erase tab in the DU main window.
    4. Set the format type to Mac OS Extended (Journaled.) Optionally, click on the Security button
    and set the Zero Data option to one-pass.
    5. Click on the Erase button and wait until the process has completed.
    6. Quit DU and return to the Mac OS X Utilities window.
    7. Select Reinstall Lion/Mountain Lion and click on the Install button.
    8. Upon completion shutdown the computer.
    *If your computer came with Lion or Mountain Lion pre-installed then you are entitled to transfer your license once. If you purchased Lion or Mountain Lion from the App Store then you cannot transfer your license to another party. In the case of the latter you should install the original version of OS X that came with your computer. You need to repartition the hard drive as well as reformat it; this will assure that the Recovery HD partition is removed. See Step Three above. You may verify these requirements by reviewing your OS X Software License.

  • HOW TO VERIFY A DEFERRED TRANSACTION HAS BEEN PUSHED IN ORACLE8(MASTER REPL

    제품 : ORACLE SERVER
    작성날짜 : 2004-08-16
    HOW TO VERIFY A DEFERRED TRANSACTION HAS BEEN PUSHED IN ORACLE8
    (MASTER REPLICATION)
    ================================================================
    본 자료에서는 어느 시점에서, Deferred transaction이 PUSH 되었는지를
    확인하는 방법을 제시한다(In symmetric replication).
    단, Advanced Replication Feature는 8~10g Standard Edition에서는
    지원하지 않는다.
    개 념
    =====
    V7.x 에서는 deferred transaction 이 PUSH 됨과 동시에 삭제 되었으나, V8.x
    부터는 일정시간(interval) 이후에 PURGE 되는 절차를 따른다.
    임의의 transaction은 아래와 같은 조건을 만족할때 PUSH 된 것으로 확인될
    수 있다.
    즉, SCN-based integer 값을 기초로 transaction ordering 을 유지한다는
    기본개념을 적용한 것이다.
    - system.DEF$_DESTINATION.last_delivered > system.DEF$_AQCALL.cscn
    * DEF$_DESTINATION.last_delivered : the last transaction applied
    at the destination
    예 제
    =====
    이 예제는 REP1.ORACLE.COM site 에서 REP2.ORACLE.COM site 로 transaction 이 PUSH 되는 결과를 보여준다.
    SQL> insert into scott.dept values (80,'MARKETING','ORLANDO');
    1 row created.
    SQL> commit;
    Commit complete.
    SQL> select * from deftran;
    DEFERRED_TRAN_ID DELIVERY_ORDER
    4.49.495 479001
    3.0.494 478972
    OR
    SQL> select enq_tid, cscn from system.def$_aqcall;
    ENQ_TID CSCN
    4.49.495 479001
    3.0.494 478972
    DEF$_DESTINATION table을 통하여 마지막으로 propagation 된 정보를 확인할
    수 있다
    SQL> select dblink, last_delivered from system.def$_destination;
    DBLINK LAST_DELIVERED
    REP2.ORACLE.COM 478992
    REP1.ORACLE.COM 478878
    이 시점에서 DEFERRED_TRAN_ID or ENQ_TID 4.49.495 transaction 이 PUSH 되지
    않았음을 알 수 있는것이다. 이는 DELIVERY_ORDER or CSCN 479001 transaction이 REP2.ORACLE.COM 에 대해 마지막으로 전이된 478992 보다 큰 값을 가지고 있기
    때문이다.
    즉, DEF$_AQCALL.CSCN > DEF$_DESTINATION.LAST_DELIVERED 을 만족한다면 해당 transaction 은 아직 PUSH 되지 않았음을 뜻한다.
    그럼 PUSH scheduling 을 적용 함으로써, 이러한 값들이 어떻게 변하는지 알아
    보도록 하자.
    SQL> exec dbms_defer_sys.schedule_push('rep2.oracle.com',
    'sysdate+1/(60*24)', sysdate+1/(60*24));
    PL/SQL procedure successfully completed.
    SQL> select * from deftran;
    DEFERRED_TRAN_ID DELIVERY_ORDER
    4.49.495 479001
    3.0.494 478972
    SQL> select enq_tid, cscn from system.def$_aqcall;
    ENQ_TID CSCN
    4.49.495 479001
    3.0.494 478972
    위 값들은 전혀 변하지 않았으나, 이는 Deferred transaction mechanism 관점에서
    정상적인 정보를 나타내고 있다(아직 PURGE 되지 않았기 때문)
    SQL> Select dblink, last_delivered from system.def$_destination;
    DBLINK LAST_DELIVERED
    REP2.ORACLE.COM 479017
    REP1.ORACLE.COM 478878
    그러나, DEF$_DESTINATION table 의 LAST_DELIVERED column 값을 확인해 보면, REP2.ORACLE.COM site 에 대한 값이 증가했음을 볼 수 있다.
    그런 이유로 DEFTRAN 에 기록되었던 transaction 중 DEF$_AQCALL.CSCN < DEF$_DESTINATION.LAST_DELIVERED 을 만족하는 모든 transaction 은 PUSH
    되었음을 확인할 수 있는것이다.
    특정 SITE 에 대해 PUSH 된 transaction 수를 구하는 방법
    ====================================================
    SQL> connect system/manager
    Connected.
    SQL> select count(*)
    from def$_aqcall
    where cscn < (select last_delivered
    from def$_destination
    where dblink ='REP2.ORACLE.COM');
    COUNT(*)
    2
    Reference
    =========
    Multimaster replication
    How to rectify the replication environment
    Parallel propagation

    제품 : ORACLE SERVER
    작성날짜 : 2004-08-16
    HOW TO VERIFY A DEFERRED TRANSACTION HAS BEEN PUSHED IN ORACLE8
    (MASTER REPLICATION)
    ================================================================
    본 자료에서는 어느 시점에서, Deferred transaction이 PUSH 되었는지를
    확인하는 방법을 제시한다(In symmetric replication).
    단, Advanced Replication Feature는 8~10g Standard Edition에서는
    지원하지 않는다.
    개 념
    =====
    V7.x 에서는 deferred transaction 이 PUSH 됨과 동시에 삭제 되었으나, V8.x
    부터는 일정시간(interval) 이후에 PURGE 되는 절차를 따른다.
    임의의 transaction은 아래와 같은 조건을 만족할때 PUSH 된 것으로 확인될
    수 있다.
    즉, SCN-based integer 값을 기초로 transaction ordering 을 유지한다는
    기본개념을 적용한 것이다.
    - system.DEF$_DESTINATION.last_delivered > system.DEF$_AQCALL.cscn
    * DEF$_DESTINATION.last_delivered : the last transaction applied
    at the destination
    예 제
    =====
    이 예제는 REP1.ORACLE.COM site 에서 REP2.ORACLE.COM site 로 transaction 이 PUSH 되는 결과를 보여준다.
    SQL> insert into scott.dept values (80,'MARKETING','ORLANDO');
    1 row created.
    SQL> commit;
    Commit complete.
    SQL> select * from deftran;
    DEFERRED_TRAN_ID DELIVERY_ORDER
    4.49.495 479001
    3.0.494 478972
    OR
    SQL> select enq_tid, cscn from system.def$_aqcall;
    ENQ_TID CSCN
    4.49.495 479001
    3.0.494 478972
    DEF$_DESTINATION table을 통하여 마지막으로 propagation 된 정보를 확인할
    수 있다
    SQL> select dblink, last_delivered from system.def$_destination;
    DBLINK LAST_DELIVERED
    REP2.ORACLE.COM 478992
    REP1.ORACLE.COM 478878
    이 시점에서 DEFERRED_TRAN_ID or ENQ_TID 4.49.495 transaction 이 PUSH 되지
    않았음을 알 수 있는것이다. 이는 DELIVERY_ORDER or CSCN 479001 transaction이 REP2.ORACLE.COM 에 대해 마지막으로 전이된 478992 보다 큰 값을 가지고 있기
    때문이다.
    즉, DEF$_AQCALL.CSCN > DEF$_DESTINATION.LAST_DELIVERED 을 만족한다면 해당 transaction 은 아직 PUSH 되지 않았음을 뜻한다.
    그럼 PUSH scheduling 을 적용 함으로써, 이러한 값들이 어떻게 변하는지 알아
    보도록 하자.
    SQL> exec dbms_defer_sys.schedule_push('rep2.oracle.com',
    'sysdate+1/(60*24)', sysdate+1/(60*24));
    PL/SQL procedure successfully completed.
    SQL> select * from deftran;
    DEFERRED_TRAN_ID DELIVERY_ORDER
    4.49.495 479001
    3.0.494 478972
    SQL> select enq_tid, cscn from system.def$_aqcall;
    ENQ_TID CSCN
    4.49.495 479001
    3.0.494 478972
    위 값들은 전혀 변하지 않았으나, 이는 Deferred transaction mechanism 관점에서
    정상적인 정보를 나타내고 있다(아직 PURGE 되지 않았기 때문)
    SQL> Select dblink, last_delivered from system.def$_destination;
    DBLINK LAST_DELIVERED
    REP2.ORACLE.COM 479017
    REP1.ORACLE.COM 478878
    그러나, DEF$_DESTINATION table 의 LAST_DELIVERED column 값을 확인해 보면, REP2.ORACLE.COM site 에 대한 값이 증가했음을 볼 수 있다.
    그런 이유로 DEFTRAN 에 기록되었던 transaction 중 DEF$_AQCALL.CSCN < DEF$_DESTINATION.LAST_DELIVERED 을 만족하는 모든 transaction 은 PUSH
    되었음을 확인할 수 있는것이다.
    특정 SITE 에 대해 PUSH 된 transaction 수를 구하는 방법
    ====================================================
    SQL> connect system/manager
    Connected.
    SQL> select count(*)
    from def$_aqcall
    where cscn < (select last_delivered
    from def$_destination
    where dblink ='REP2.ORACLE.COM');
    COUNT(*)
    2
    Reference
    =========
    Multimaster replication
    How to rectify the replication environment
    Parallel propagation

  • How to Verify Db logs and backups

    1) How to check that Oracle Database logs are being archived or cleaned up on a regular basis in Solaris
    2) How to Verify backups are being performed in solaris

    844081 wrote:
    EdStevens wrote:
    844081 wrote:
    1) How to check that Oracle Database logs are being archived or cleaned up on a regular basis in Solaris
    2) How to Verify backups are being performed in solarisIf you are talking about oracle backups and logs, it is OS independent. Look at the various options of the LIST command in rman. In addition, have your rman backup jobs write a log that you can examine.Can you be clear about what you are saying.. just letme know about the steps to be followed... :)Step 1 - point your browser to tahiti.oracle.com. This is the portal to the complete oracle doc set
    Step 2 - drill down to your product and version. Here you will find the complete doc set for said product/version
    Step 3 - locate the backup and recovery reference
    Step 4 - Find the LIST command
    Step 5 - read what each option of LIST can show you.

  • Port 135 and 25913 and how to run Solaris Container Manager?

    What are these ports 135 and 25913 and how to I run Solaris Container Manager .
    thanks

    Hi Zeealee,
    zeealee wrote:
    What are these ports 135 and 25913 and how to I run Solaris Container Manager .I haven't heard of those ports being used with SunMC before, sorry (but maybe my memory is just bad). The features of Solaris Container Manager (SCM) have now almost been entirely superseded by [Oracle Enterprise Manager Ops Center|http://www.oracle.com/us/products/enterprise-manager/opscenter/index.html] (forum here), but if you're still looking to try SCM, the manual can be found here, and if you said "yes" to SCM when you installed your SunMC Server, then you should see it in your SunMC web interface:
    https://<sunmc_server>:6789 --> SunMC 4.0 --> Manage Solaris Container
    If you'd like a demo of how you perform Container/LDOM operations in Ops Center, let me know and I'll set it up.
    Regards,
    [email protected]

Maybe you are looking for