How to verify that rented movie works
I rent movies on iTunes to watch on my iPad during air travel but the last time I did this, they would not play. When I got home, I found out that they had not been downloaded despite showing up on my iPad. I'm going to travel again in a few weeks so I downloaded some movies today. How can I make sure they are there and will work without starting the 24 hr time period that rented movies have to be viewed within once they are started?
Patti
You can't.
Can you provide more detail regarding what happened? What did you see when you attempted to view the movies? What makes you think that the download did not take place? When the download is in process, the iPad shows you a decrementing timer. Did you see that?
You might want to try a system Reset as it cures many ills, is harmless, and takes only a minute or so:
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears.
A Reset does NOT delete apps, photos, movies, music or any other data.
Also, you might wish to download the 4.2 User Guide. Pay special attention to page 170.
http://support.apple.com/manuals/#ipad
Similar Messages
-
Newbie q: How to verify that encryption is working
Hello,
In a sharepoint environment, we have installed a certificate and force encryption=on, according to :
http://social.technet.microsoft.com/Forums/en-US/bde679d9-ff83-4fa7-b402-42e336a97106/force-encryption-on-sql-server-not-working?forum=sqlsecurity
How can I verify that the encryption is actually working? I saw wireshark but I don't know to use it.
Thank you
ChristosBasically if you encrypt all of DataBases of SharePoint, you can open one DataBase and use Select statement to verify if your can read the Data.
Connection encryption is something quite different than database encryption.
The most ideal way to verify connection encryption is to use a packet sniffer such as Wireshark. Since that's no something you know how to use and are resistant to learning, I'd run the following on my SQL Server and look for connections which have
an encrypt_option of false:
select * from sys.dm_exec_connections
Connections which are encrypted should have an encrypt_option of TRUE. -
How to Check source systems in RSA1 and verify that connections are working
How to Check source systems in RSA1 and verify that connections are working ok and how to Check Planning Area have green status.................
Hi,
In rsa1, go to 'Tools' and option 'Manage Source System' - the screens are self explanatory there after. To check the planning areas, go to transaction /SAPAPO/MSDP_ADMIN anc check the status of the relevant planning areas.
Regards
Vinod -
My transparency does not work on my iPhone and I was wondering how I fix that? It worked when I first downloaded ios7 but not now.
Hello wilsontot_too,
Thank you for the details of the issue you are experiencing on your iPhone. It sounds like you are not noticing transparency on your iPhone. It may be that you have "Increase Contrast" turned on in your iPhone settings.
I recommend verifying that Increase Contrast is turned off in Settings>General>Accessibility.
iPhone User Guide - Large, bold, and high-contrast text
http://help.apple.com/iphone/7/#/iph73b89c6
Thank you for using Apple Support Communities.
Best,
Sheila M. -
How to verify that the variable "does not contain" a value?
Hi
I am using CP 7.0.1.237.
We want to use Text Area widget for a custom quiz and verify an answer. While we figured out how to verify the existence of certain keywords, we are not able to figure out how to verify that the content should NOT contain certain keywords. For example, we want to ensure that the text entered in this widget should not contain "Transformation" and "Non-compliant".
Is this possible at all?
Thanks
SreekanthHere's what the solution might look like in JavaScript. This would be for SWF output and aimed at Cp 7. For Cp 8, this would still work for SWF output, but you'd probably want to take advantage of the new unified JS API that gets and sets Cp variables for both SWF and HTML5 output. You can read more about that here: Common JS interface
//Get the text area value from Captivate (SWF output Only)
var cpTextAreaValue = document.Captivate.cpEIGetValue('m_VarHandle.v_TextArea);
//convert the value to lower case to properly compare
cpTextAreaValue = cpTextAreaValue.toLowerCase();
//Check if text area value contains the words "transformation" or "non-compliant"
if(cpTextAreaValue.indexof('organizational') > -1 && cpTextAreaValue.indexof('behavioral ') > -1 && cpTextAreaValue.indexof('managerial') > -1 && cpTextAreaValue.indexof('transformation') < 0 && cpTextAreaValue.indexof('non-compliant') < 0){
//the text area has the correct answer so increment varScore
//get the current score from Captivate
var score = document.Captivate.cpEIGetValue('m_VarHandle.varScore');
//increment score by 1
score++;
//set score in Captivate
document.Captivate.cpEISetValue('m_VarHandle.varScore', score);
} else {
//the text area does not have the correct answer so show message to user inside of Captivate
document.Captivate.cpEISetValue('m_VarHandle.v_message', 'Answer is not correct');
This JS has not been tested. Note that the "does not contain" operator is done using the "indexof" operator in JS.
Jim Leichliter -
How to restore a rented movie on my Mac? I have rented 2 movies and they disappeared!
how to restore a rented movie on my Mac? I have rented 2 movies and they disappeared!
There is a time limit on how long they stay available.
-
What is Veritas HA, and How to verify that Veritas HA system is "lights on"
Hi, Friends:
I have two questions,
1.What is Veritas HA?
2.How to verify that Veritas HA system is "lights on"?
thank you very much,
JerryVeritas HA = Veritas High Availability.
http://www.google.com/search?q=veritas+HA&ie=utf-8&oe=utf-8&aq=t&rls=org.mozilla:en-US:official&client=firefox-a -
How to test that my JDBC work?
I'm migrating an application from Weblogic 5.1 to 6.1 and already it's
driving
nuts with all the huge changes.
Essentially, in the past, we had our own directory structure and
script files where they referenced the necessary Weblogic jars... and
weblogic looked through your PATH environment variable to find any
weblogic.properties file. NOW, Weblogic forces you to create a
config/domain directory where the config file is and forces you to use
a DefaultWebApp as well... or so it seems.
Anyway, I'm trying to take this migration one step at a time and deal
with things like the EJB changes further down the road.
Right now, I'm just trying to get the server to come up and recognize
my database connection, however... either, the stuff I have IS working
and 6.1 is just not verbose in its messages or I am doing something
wrong... cause essentially, I get the following after I run the
server:
Starting WebLogic Server ....
<Dec 6, 2001 7:27:20 PM EST> <Notice> <Management> <Loading
configuration file G
:\Working\main\echo\config\echo\config.xml ...>
<Dec 6, 2001 7:27:31 PM EST> <Notice> <WebLogicServer> <Starting
WebLogic Admin
Server "myserver" for domain "echo">
<Dec 6, 2001 7:27:58 PM EST> <Notice> <Management> <Application Poller
started f
or development server.>
<Dec 6, 2001 7:27:59 PM EST> <Notice> <WebLogicServer> <ListenThread
listening o
n port 7001>
<Dec 6, 2001 7:27:59 PM EST> <Notice> <WebLogicServer>
<SSLListenThread listenin
g on port 4002>
<Dec 6, 2001 7:28:00 PM EST> <Notice> <WebLogicServer> <Started
WebLogic Admin S
erver "myserver" for domain "echo" running in Development Mode>
Now, I DO have a JDBC connection declared in my config.xml file... as
follows:
<JDBCConnectionPool CapacityIncrement="2"
DriverName="oracle.jdbc.driver.OracleDriver"
InitialCapacity="2"
LoginDelaySeconds="1" MaxCapacity="10" Name="oraclePool"
Properties="user=scott;password=tiger;dll=ocijdbc9;protocol=thin"
ShrinkPeriodMinutes="15" ShrinkingEnabled="true"
Targets="myserver" TestConnectionsOnRelease="true"
TestConnectionsOnReserve="true" TestTableName="dual"
URL="jdbc:oracle:thin:@domain:1521:ORDdev"/>
Now, shouldn't weblogic at least parse this and try to connect to my
database and tell me YES or NO as to whether it was successful????
I've run the 'dbping' outside of Weblogic and that was successful. Is
there anyway to verify that this is working?
And also, I don't have a JDBCDataSource... I didn't need one with
5.1... we use Toplink which kind of hides a lot of the database
access... and when we did need a database connection, a
javax.sql.DataSource object was created by doing a context look up for
"weblogic.jdbc.jts.oraclePool". So, I'm not quite sure, what I would
put in a JDBCDataSource element.
Any help would be great!
Thanks!Hi Michael,
When the server comes up open the console in the browser, select the
connection pool and select monitoring you will see some information about
the connections.
Most of the messages to the sever window are suppressed unless you enable
info messages in the server, you can do that from the console or by editing
the config.xml file. By default you will see Errors if any. so in your case,
if you didnt see any error your connection pool must have comeup properly.
you can check it in the monitoring tab.
regarding the JDBCDataSource , you dont need one unless your application is
looking for one. your current application should work with minimal or no
programming changes to it.
Its always recommended to use the DataSource for getting a connection from
the pool. DataSource helps you use the same code to access a connection from
the server side as well as the client side so you dont have to code the
server side and client side components differently.
hth
sree
"Michael J. Hudson" <[email protected]> wrote in message
news:[email protected]...
I'm migrating an application from Weblogic 5.1 to 6.1 and already it's
driving
nuts with all the huge changes.
Essentially, in the past, we had our own directory structure and
script files where they referenced the necessary Weblogic jars... and
weblogic looked through your PATH environment variable to find any
weblogic.properties file. NOW, Weblogic forces you to create a
config/domain directory where the config file is and forces you to use
a DefaultWebApp as well... or so it seems.
Anyway, I'm trying to take this migration one step at a time and deal
with things like the EJB changes further down the road.
Right now, I'm just trying to get the server to come up and recognize
my database connection, however... either, the stuff I have IS working
and 6.1 is just not verbose in its messages or I am doing something
wrong... cause essentially, I get the following after I run the
server:
Starting WebLogic Server ....
<Dec 6, 2001 7:27:20 PM EST> <Notice> <Management> <Loading
configuration file G
:\Working\main\echo\config\echo\config.xml ...>
<Dec 6, 2001 7:27:31 PM EST> <Notice> <WebLogicServer> <Starting
WebLogic Admin
Server "myserver" for domain "echo">
<Dec 6, 2001 7:27:58 PM EST> <Notice> <Management> <Application Poller
started f
or development server.>
<Dec 6, 2001 7:27:59 PM EST> <Notice> <WebLogicServer> <ListenThread
listening o
n port 7001>
<Dec 6, 2001 7:27:59 PM EST> <Notice> <WebLogicServer>
<SSLListenThread listenin
g on port 4002>
<Dec 6, 2001 7:28:00 PM EST> <Notice> <WebLogicServer> <Started
WebLogic Admin S
erver "myserver" for domain "echo" running in Development Mode>
Now, I DO have a JDBC connection declared in my config.xml file... as
follows:
<JDBCConnectionPool CapacityIncrement="2"
DriverName="oracle.jdbc.driver.OracleDriver"
InitialCapacity="2"
LoginDelaySeconds="1" MaxCapacity="10" Name="oraclePool"
Properties="user=scott;password=tiger;dll=ocijdbc9;protocol=thin"
ShrinkPeriodMinutes="15" ShrinkingEnabled="true"
Targets="myserver" TestConnectionsOnRelease="true"
TestConnectionsOnReserve="true" TestTableName="dual"
URL="jdbc:oracle:thin:@domain:1521:ORDdev"/>
Now, shouldn't weblogic at least parse this and try to connect to my
database and tell me YES or NO as to whether it was successful????
I've run the 'dbping' outside of Weblogic and that was successful. Is
there anyway to verify that this is working?
And also, I don't have a JDBCDataSource... I didn't need one with
5.1... we use Toplink which kind of hides a lot of the database
access... and when we did need a database connection, a
javax.sql.DataSource object was created by doing a context look up for
"weblogic.jdbc.jts.oraclePool". So, I'm not quite sure, what I would
put in a JDBCDataSource element.
Any help would be great!
Thanks! -
how long does a rented movie last?
when i rent the movie in my pc, can i put it into my ipad and then back to my pc?Yu can copy it to your iPad from your computer, but if you rent it directly on the iPad then you can't copy it off - from here :
If you download a rented movie on your computer: You can transfer it to a device such as your Apple TV (1st generation), iPhone, iPad, or iPod if it’s a standard-definition film (movies in HD can only be watched on your computer, iPad, iPhone 4 or later, iPod touch (4th generation or later), or Apple TV). Once you move the movie from your computer to a device, the movie will disappear from your computer's iTunes library. You can move the movie between devices as many times as you wish during the rental period, but the movie can only exist on one device at a time.
If you download a rented movie on your iPhone 4 or later, iPad, iPod touch (4th generation or later), or Apple TV: It is not transferable to any other device or computer.
From when you rent a movie you have 30 days in which to watch it, but once you start watching it you have 48 hours to finish watching it (24 hours in the US) - you can watch it as many times as like within those 48 (or 24) hours. -
How to verify that oracle service is up
How to verify that Oracle server is up?
how to verify that Oracle db is up (or online??)
thxHi,
This Sun ksh command will show the Oracle processes for your instance:
ps -ef|grep $ORACLE_SID|grep -v grep
Here the Sun script that I use to check if your database is running:
check_stat=`ps -ef|grep ${ORACLE_SID}|grep pmon|wc -l`;
oracle_num=`expr $check_stat`
if [ $oracle_num -lt 1 ]
then
exit 0
fi
# Test to see if Oracle is accepting connections
$ORACLE_HOME/bin/sqlplus -s /<<! > /tmp/check_$ORACLE_SID.ora
select * from v\$database;
exit
# If not, exit and e-mail . . .
check_stat=`cat /tmp/check_$ORACLE_SID.ora|grep -i error|wc -l`;
oracle_num=`expr $check_stat`
if [ $oracle_num -ne 0 ]
then
mailx -s "$ORACLE_SID is down!" [email protected]
exit 16
fi
If you are not familiar with UNIX scripting, there are many script collections that you can use:
http://www.google.com/search?&q=oracle+script+collection
To learn UNIX scripting, Jon Emmons (Life after Coffee blog) has a book of Oracle Linux/UNIX scripts:
http://www.rampant-books.com/book_2005_1_linux_commands.htm -
How to verify that your connected to wifi
How to verify that your connected to wifi
3 ways:
1. The symbol at the top of the iPad on the left hand side. Will tell you if you are connected, and how strong the signal is:
2. Going into Settings->Wifi will tell you what Wifi network you are connected to at the time if any,
3. If the network has internet access, you should be able to open a website in Safari. -
How to verify that embedded OC4J is loading Custom LoginModule?
I've written a custom login module to authenticate against a custom datastore. I've added a system property
java.security.auth.login.config=C:\javadev\...\jaas.configas recommended by Yvonne here: Re: Custom LoginModule used by BC4J
I still get the following when I load a UIX page out of this module:
msg=JBO-33021: Failed authenticate user nullThere are many debug System.out(...) statements in the code (including in the initialize() function) but none are showing up in the OC4J console. Does anyone know how to verify that the LoginModule is indeed getting loaded? Is it normal for these System.out() statements not to show in the OC4J console?
I get the impression that the LoginModule is not being loaded but I'm not sure if those traces are enough...
Thanks,
/sflThanks much for the prompt reply and debugging tips Steve and Avi!
I used both switches (-DApplicationServerDebug and -verbose:class) and still no sign of the class being loaded; none of the traces (I did trace in the construct, though I failed to mention in my original post) nor do any of the app server or jvm debug messages show any sign of the LoginModule being loaded. So now I'm fairly certain I'm going about the wrong way to get this module loaded. Should I also be posting this to the JDeveloper forum?
My application module configuration is as follows:
jbo.security.config=<blank> (is this right?)
jbo.security.context=oracle.security.jazn
jbo.security.enforce=Must
jbo.security.loginmodule=customModuleThe command line to the JVM contains:
-Djava.security.auth.login.config=C:\javadev\jdev9052\j2ee\home\config\jaas.config[yes Avi, I was unfortunately imposed an M$ env. by the powers that be : ( ]
And, well I've been trying a lot of different things w/ the jaas.config file:
customModule{
myPack.controller.MyLoginModule required;
myApp{
myPack.controller.MyLoginModule required;
myPack.LookupModuleLocal{
myPack.controller.MyLoginModule required;
myPack.LookupModule{
myPack.controller.MyLoginModule required;
Ws-MyProg-webapp{
myPack.controller.MyLoginModule required;
default{
myPack.controller.MyLoginModule required;
current-workspace-app{
myPack.controller.MyLoginModule required;
};Any idea where I'm going wrong? Do I need to do anything else to get this module loaded? At first I thought I needed to modify the jazn-data.xml file but I saw a note in another thread Custom LoginModule used by BC4J which says that it's not necessary to modify it when using a custom LoginModule. Is this right, or should I be modifying that file?
Thanks,
java.lang.Object - jobject ;- ) -
I have a rented HD movie that is taking up space and will not play I got from iTunes.
iTunes store agreed to credit me "as a one time exception" for the movie they sent me that will not play. I suppose that means the default is that we pay for movies that don't work when we get them.
But my angst is that it is taking up space (I know I have 64GB but...) and I would like to get rid of the movie.
Any thoughts?Never thought of holding and clicking on the X. Thanks, I was restoring the iPad and getting it done that way. Your way, much simpler
Ralph -
Why would a rented movie work on the ground but not in the air?
This is the craziest thing. I rented a movie from my MacBook Pro and then transferred it to my iPad 2 for a flight. However once I got on the plane each time I tried to open it I received a message that the movie could not be opened. OK. I figured I made a mistake in the transfer. Once I got home I tried to open the movie again (in Airplane mode, just to be sure) and it loaded right up. I didn't press play since I was leaving on another flight in two days. Got on the flight and had the exact same problem. Once I landed I tried it again and it loaded right up, but I didn't hit play because I have another flight on Friday. What are the odds it will occur three times in a row? I have 20 days left on the rental and about six more flights. This could be fun.
To lend a little irony to the situation the movie is "Up In The Air". Anyone have any clue what the heck is going on? The only variable among the two instances is that in the air I had headphones plugged in, but on the ground I didn't.Hi Dominique:
First-if your mac can control the camera but not see the video,
*Open Garageband
*Play a note or two
*Close Garageband
*Open iMovie
The camera will work now-REALLY!!
If not, look here:
http://docs.info.apple.com/article.html?artnum=43000
Sue -
How to verify that the request has been moved to Quality System
Hi friends,
I a new abaper and i need ur help in solving this issue.
I have developed an object and released( as per the suggestions given already in this forum). Its working well and i can see the request in released status in se09.
No what i really want is , How can i verify that the request has been moved to Quality System by the basis people, assuming that i have only access to dev system.Yes, once u release the request, if it is successfullly released will make the request avaialble under released requests
As an ABAP'er this is enof
<b>wht abt me Sravanan :-(</b>
Regards
- Gopi
Message was edited by: Gopi Narendra
Maybe you are looking for
-
Help!!:Where is my 25-character production key
My new T500 nees a 25-character production key to start word2007?where it is?
-
Dual 1.8 is running like a snail :(
I was running panther and then installed tiger over top of it and a couple months later it was running really slow so I reformated it totally and it's still running really slow. I check the disk image at it said it was fine and I've run onyx and I ha
-
Speeding up spaces: How to disable the transition animation?
Is there some way the disable the Spaces transition animation? I would like to change between the different virtual desktop as fast as possible. There are some times when it gets quite annoying: when you move to other spaces the screen flickers if th
-
i just had my iphone turned back on today because i damaged the phone i had. So i connected my phone to my computer and it said my phone had to do a restore, and it did, but it whipped everthing from my phone, my pictures and everything. It tells me
-
PhotoShop Elements Editor has stopped working
PhotoShop Elements 12 Editor has stopped working. I have Windows 7