How to verify that your connected to wifi

3 ways:
1. The symbol at the top of the iPad on the left hand side. Will tell you if you are connected, and how strong the signal is:
2. Going into Settings->Wifi will tell you what Wifi network you are connected to at the time if any,
3. If the network has internet access, you should be able to open a website in Safari.

Similar Messages

How to verify that oracle service is up

How to verify that Oracle server is up?
how to verify that Oracle db is up (or online??)
thx

Hi,
This Sun ksh command will show the Oracle processes for your instance:
ps -ef|grep $ORACLE_SID|grep -v grep
Here the Sun script that I use to check if your database is running:
check_stat=`ps -ef|grep ${ORACLE_SID}|grep pmon|wc -l`;
oracle_num=`expr $check_stat`
if [ $oracle_num -lt 1 ]
then
exit 0
fi
# Test to see if Oracle is accepting connections
$ORACLE_HOME/bin/sqlplus -s /<<! > /tmp/check_$ORACLE_SID.ora
select * from v\$database;
exit
# If not, exit and e-mail . . .
check_stat=`cat /tmp/check_$ORACLE_SID.ora|grep -i error|wc -l`;
oracle_num=`expr $check_stat`
if [ $oracle_num -ne 0 ]
then
mailx -s "$ORACLE_SID is down!" [email protected]
exit 16
fi
If you are not familiar with UNIX scripting, there are many script collections that you can use:
http://www.google.com/search?&q=oracle+script+collection
To learn UNIX scripting, Jon Emmons (Life after Coffee blog) has a book of Oracle Linux/UNIX scripts:
http://www.rampant-books.com/book_2005_1_linux_commands.htm

I have an ipod touch with ios 5.1.1 that wont connect to wifi. what can i do?

have an ipod touch with ios 5.1.1 that wont connect to wifi. what can i do? Ive done a restore, recovery, and still wont connect.

Does the iOS device connect to other networks?
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. Not clear if you did this type of restore
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Excel, PowerView error in SharePoint 2013: "An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source."

I've installed SQL Server 2012 SP1 + SP server 2012 + SSRS and PowerPivot add-in.
I also configured excel services correctly. Everything works fine but the powerview doesn't work!
While I open an excel workbook consist of a PowerView report an error occurs: "An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions
to access the data source."
error detail:
<detail><ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsCannotRetrieveModel</ErrorCode><HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message xmlns="http://www.microsoft.com/sql/reportingservices">An
error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source.</Message><HelpLink xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0</HelpLink><ProductName
xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName><ProductVersion xmlns="http://www.microsoft.com/sql/reportingservices">11.0.3128.0</ProductVersion><ProductLocaleId
xmlns="http://www.microsoft.com/sql/reportingservices">127</ProductLocaleId><OperatingSystem xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem><CountryLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId><MoreInformation
xmlns="http://www.microsoft.com/sql/reportingservices"><Source>ReportingServicesLibrary</Source><Message msrs:ErrorCode="rsCannotRetrieveModel" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the
data source.</Message><MoreInformation><Source>Microsoft.ReportingServices.ProcessingCore</Source><Message msrs:ErrorCode="rsErrorOpeningConnection" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsErrorOpeningConnection&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">Cannot create a connection to data source 'EntityDataSource'.</Message><MoreInformation><Source></Source><Message>For more information about this error navigate
to the report server on the local server machine, or enable remote errors</Message></MoreInformation></MoreInformation></MoreInformation><Warnings xmlns="http://www.microsoft.com/sql/reportingservices" /></detail>
Please help me to solve this issue. I don't know if uploading the excel workbook is enough or maybe It needed to connect to another data source.
I Appreciate in advance.

Hi Ali.y,
Based on the current error message, the error can be related to the
Claims to Windows Token Service (C2WTS) and is an expected error under certain conditions. To verify the issue, please check the aspects below:
     1. The C2WTS Windows service and C2WTS SharePoint service are both running.
     2. Check the SQL Server Browser service is running on the machine that has the PowerPivot instance of SSAS.
     3. Check the domain. You're signing into SharePoint with a user account in some domain (call it Domain A). When Domain A is equal to Domain B which SharePoint server itself is located (they're the same domain), or Domain
A trusts Domain B.
In addition, the error may be caused by Kerberos authentication issue due to missing SPN. In order to make the Kerberos authentication work, you need to configure the Analysis Services to run under a domain account, and register the SPNs for the Analysis
Services server.
To create the SPN for the Analysis Services server that is running under a domain account, run the following commands at a command prompt:
• Setspn.exe -S MSOLAPSvc.3/Fully_Qualified_domainName OLAP_Service_Startup_Account
Note: Fully_Qualified_domainName is a placeholder for the FQDN.
• Setspn.exe -S MSOLAPSvc.3/serverHostName OLAP_Service_Startup_Account
For more information, please see:
How to configure SQL Reporting Services 2012 in SharePoint Server 2010 / 2013 for Kerberos authentication
Regards,
Heidi Duan
Heidi Duan
TechNet Community Support

HT201317 I had my photo stream on and my icloud all set up, i just had the screen replaced and they somehow lost all the photos off my phone, but why wont the photo's reload back on to my iphone now that im connected to wifi again, where are all my photos

I had my photo stream on and my icloud all set up, i just had the screen replaced and they somehow lost all the photos off my phone, but why wont the photo's reload back on to my iphone now that im connected to wifi again, where are all my photos???

When photos are added to the photo stream album on a device (either due to a new photo having been taken or having been synced from another device using the stream) they remain in the album. However, the syncing process involves copying the photos to the photo stream server where they are kept for a maximum of 30 days, up to 1000 photos. If a device is reset or the stream is turned off or turned back on again (or in your case, the device was repaired), the photos that were on the device's photo stream album are gone and the only ones to appear are those that are currently on the servers (recall the 30 day limit).
If some of your photos are older than 30 days, then they are no longer stored on the cloud and hence are not synced down to the iphone.
Recall, photo stream is just a syncing service, it is not designed as a storage service for photos. Always sync photos to a computer for archiving.

How disabled ipad could not connect to wifi

I have more than 1000 IPAd for students in school and i am using MDM to clear passcode for student devices who had forgettin the passcode , when the device is disabled and netwrok sign still appear the clear passcode is working fine , once this device has lost the connection to wifi or rebooted the netwrok sign is disappeared and MDM could not see the device.
can any one help me in how we can iPAD reboot with defuaolt netwrok defined ??
I tried to define wifi profile with defualt password but it doesnt work
what is the way to make disabled iPAD booting with default netwroking defiend.
Thanks for helpfull support

THank you for your infomration , it is just intoruction about passcode but our issue is once the iPAD is disabled and the device is rebooted (restart) , wifi netwrok signal is not appeared and device will stay disconnected on netwrk .
once the remmeber the passcode and you login to device the wifi signal appears
the question is how we can keep device connected to wifi even if it is disabled ???

The Cluster Service function call 'ClusterResourceControl' failed with error code '1008(An attempt was made to reference a token that does not exist.)' while verifying the file path. Verify that your failover cluster is configured properly.

I am experiencing this error with one of our cluster environment. Can anyone help me in this issue.
The Cluster Service function call 'ClusterResourceControl' failed with error code '1008(An attempt was made to reference a token that does not exist.)' while verifying the file path. Verify that your failover cluster is configured properly.
Thanks,
Venu S.
Venugopal S ----------------------------------------------------------- Please click the Mark as Answer button if a post solves your problem!

Hi Venu S,
Based on my research, you might encounter a known issue, please try the hotfix in this KB:
http://support.microsoft.com/kb/928385
Meanwhile since there is less information about this issue, before further investigation, please provide us the following information:
The version of Windows Server you are using
The result of SELECT @@VERSION
The scenario when you get this error
If anything is unclear, please let me know.
Regards,
Tom Li

What is Veritas HA, and How to verify that Veritas HA system is "lights on"

Hi, Friends:
I have two questions,
1.What is Veritas HA?
2.How to verify that Veritas HA system is "lights on"?
thank you very much,
Jerry

Veritas HA = Veritas High Availability.
http://www.google.com/search?q=veritas+HA&ie=utf-8&oe=utf-8&aq=t&rls=org.mozilla:en-US:official&client=firefox-a

I upgraded to iOS7 without incident and has been functioning fine. However, today, I'm unable to access anything that requires connection. WiFi strong, working fine on other devices - any suggestions?

I upgraded to iOS7 without incident and all has been functioning fine. However, today I am unable to access anything that requires connection. Wifi is strong, and working fine on other devices. Any suggestions?

Hi there,
You mentioned that you have tried a few troubleshooting steps already, but you may want to take a look at the article below, specifically the section titled "If you are unable to access the Internet while connected to a Wi-Fi network"
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Hope that helps,
Griff W.

I have several iPod touches and there is always one that cannot connect to wifi. after several weeks it usually rights itself. what is going on?

I have several iPod touches and there is always one that cannot connect to wifi. after several weeks it usually rights itself. what is going on?

Matthew...
Try here > iOS: Troubleshooting Wi-Fi networks and connections

How to verify that the variable "does not contain" a value?

Hi
I am using CP 7.0.1.237.
We want to use Text Area widget for a custom quiz and verify an answer. While we figured out how to verify the existence of certain keywords, we are not able to figure out how to verify that the content should NOT contain certain keywords. For example, we want to ensure that the text entered in this widget should not contain "Transformation" and "Non-compliant".
Is this possible at all?
Thanks
Sreekanth

Here's what the solution might look like in JavaScript. This would be for SWF output and aimed at Cp 7. For Cp 8, this would still work for SWF output, but you'd probably want to take advantage of the new unified JS API that gets and sets Cp variables for both SWF and HTML5 output. You can read more about that here: Common JS interface
//Get the text area value from Captivate (SWF output Only)
var cpTextAreaValue = document.Captivate.cpEIGetValue('m_VarHandle.v_TextArea);
//convert the value to lower case to properly compare
cpTextAreaValue = cpTextAreaValue.toLowerCase();
//Check if text area value contains the words "transformation" or "non-compliant"
if(cpTextAreaValue.indexof('organizational') > -1 && cpTextAreaValue.indexof('behavioral ') > -1 && cpTextAreaValue.indexof('managerial') > -1 && cpTextAreaValue.indexof('transformation') < 0 && cpTextAreaValue.indexof('non-compliant') < 0){
//the text area has the correct answer so increment varScore
//get the current score from Captivate
var score = document.Captivate.cpEIGetValue('m_VarHandle.varScore');
//increment score by 1
score++;
//set score in Captivate
document.Captivate.cpEISetValue('m_VarHandle.varScore', score);
} else {
//the text area does not have the correct answer so show message to user inside of Captivate
document.Captivate.cpEISetValue('m_VarHandle.v_message', 'Answer is not correct');
This JS has not been tested. Note that the "does not contain" operator is done using the "indexof" operator in JS.
Jim Leichliter

How to verify that embedded OC4J is loading Custom LoginModule?

I've written a custom login module to authenticate against a custom datastore. I've added a system property
java.security.auth.login.config=C:\javadev\...\jaas.configas recommended by Yvonne here: Re: Custom LoginModule used by BC4J
I still get the following when I load a UIX page out of this module:
msg=JBO-33021: Failed authenticate user nullThere are many debug System.out(...) statements in the code (including in the initialize() function) but none are showing up in the OC4J console. Does anyone know how to verify that the LoginModule is indeed getting loaded? Is it normal for these System.out() statements not to show in the OC4J console?
I get the impression that the LoginModule is not being loaded but I'm not sure if those traces are enough...
Thanks,
/sfl

Thanks much for the prompt reply and debugging tips Steve and Avi!
I used both switches (-DApplicationServerDebug and -verbose:class) and still no sign of the class being loaded; none of the traces (I did trace in the construct, though I failed to mention in my original post) nor do any of the app server or jvm debug messages show any sign of the LoginModule being loaded. So now I'm fairly certain I'm going about the wrong way to get this module loaded. Should I also be posting this to the JDeveloper forum?
My application module configuration is as follows:
jbo.security.config=<blank> (is this right?)
jbo.security.context=oracle.security.jazn
jbo.security.enforce=Must
jbo.security.loginmodule=customModuleThe command line to the JVM contains:
-Djava.security.auth.login.config=C:\javadev\jdev9052\j2ee\home\config\jaas.config[yes Avi, I was unfortunately imposed an M$ env. by the powers that be : ( ]
And, well I've been trying a lot of different things w/ the jaas.config file:
customModule{
myPack.controller.MyLoginModule required;
myApp{
myPack.controller.MyLoginModule required;
myPack.LookupModuleLocal{
myPack.controller.MyLoginModule required;
myPack.LookupModule{
myPack.controller.MyLoginModule required;
Ws-MyProg-webapp{
myPack.controller.MyLoginModule required;
default{
myPack.controller.MyLoginModule required;
current-workspace-app{
myPack.controller.MyLoginModule required;
};Any idea where I'm going wrong? Do I need to do anything else to get this module loaded? At first I thought I needed to modify the jazn-data.xml file but I saw a note in another thread Custom LoginModule used by BC4J which says that it's not necessary to modify it when using a custom LoginModule. Is this right, or should I be modifying that file?
Thanks,
java.lang.Object - jobject ;- )

How to verify that my info is backedup?

I need to reset my phone to factory setting. How do I verify that all the info on the phone is actually backed up in the iCloud?

Go to Settings>iCloud>Storage & Backup, scroll to the bottom and see the time/date at the very bottom (under Back Up Now). Then as a precaution, make a second backup on your computer using iTunes by connecting your phone to your computer, opening iTunes and going to File>Devices>Back Up. Then go to File>Devices>Transfer Purchased. Then you'll have a second backup should anything go wrong with one of them.

How to verify that a host is having/running Exadata?

Hi,
How can I verify that a machine(unix/linux) has Exadata?
Please help.
Thanks

It's the storage that's important. You can run a database on an Exadata DB servers that doesn't access Exadata storage, in which case Smart Scans etc... will be disabled. So you may want to check your asm diskgroups. They have an attribute that tells whether they reside on Exadata storage or not. You can use something like this query to show you that information.
<pre>
column exadata_storage for a20
with b as (select group_number, value from v$asm_attribute where name = 'cell.smart_scan_capable')
select a.name diskgroup, state, b.value Exadata_storage
from v$asm_diskgroup a, b
where a.group_number = b.group_number(+)
and a.name like nvl('&diskgroup',a.name)
order by 1
SYS@SANDBOX> @exadata_diskgroups.sql
Enter value for diskgroup:
DISKGROUP STATE EXADATA_STORAGE
DATA CONNECTED TRUE
RECO CONNECTED TRUE
SCRATCH MOUNTED TRUE
SMITHERS DISMOUNTED
STAGE MOUNTED TRUE
SWING MOUNTED TRUE
SYSTEM MOUNTED TRUE
7 rows selected.
</pre>

Newbie q: How to verify that encryption is working

Hello,
In a sharepoint environment, we have installed a certificate and force encryption=on, according to :
http://social.technet.microsoft.com/Forums/en-US/bde679d9-ff83-4fa7-b402-42e336a97106/force-encryption-on-sql-server-not-working?forum=sqlsecurity
How can I verify that the encryption is actually working? I saw wireshark but I don't know to use it.
Thank you
Christos

Basically if you encrypt all of DataBases of SharePoint, you can open one DataBase and use Select statement to verify if your can read the Data.
Connection encryption is something quite different than database encryption.
The most ideal way to verify connection encryption is to use a packet sniffer such as Wireshark. Since that's no something you know how to use and are resistant to learning, I'd run the following on my SQL Server and look for connections which have
an encrypt_option of false:
select * from sys.dm_exec_connections
Connections which are encrypted should have an encrypt_option of TRUE.

How to verify that your connected to wifi

Similar Messages

Maybe you are looking for