How to verify to use apps

I got my email on my computer but when I click on verify nothing happens and I can not open any apps on my i pad

Hello there, deborahafromtx.
The following Knowledge Base article offers a few steps to try when an application is not functioning as expected:
iOS: Understanding multitasking
http://support.apple.com/kb/ht4211
If an app doesn't respond to your input, or doesn't perform as expected, do the following, testing after each step:
Check for app updates.
Force the app to close.
Restart your device.
Update your iOS device.
Learn more about troubleshooting apps.
On Step 3, if the restart doesn't help resolve the issue, you may also want to try the Reset step in that article as well.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Similar Messages

HT1222 When i double click, May I know how to remove those use app below? Not like previous version I can clear it to stop those app keep on running

When i double click, May I know how to remove those use app below? Not like previous version I can clear it to stop those app keep on running

Swipe up on the thumbnail of the app and it will disappear.

How does it work using apps over wifi?

So ive seen several apps well preaty much all requering that you ahve a data plan. So say i have data active at my provider, will i be able to use live messenger and facebook over wifi or will they only use gprs/edge?
My problem is that my data is freaking expensive as soon as you use data they charge you 2 bucks but after that you can use as much as you want that day. For EDGE well we never did built a fully edge system in sweden cause 3G came almost the same and are superior to edge so all data have to go over GPRS which is slow.

Hi,
As I recall there were some issues with the first
generation shuffle and recorded books. As I recall,
if you stopped a book before the end, when you
started it again, it did not continue where you had
stopped, but rather at the beginning of the book
again. Maybe this was an isolated issue.
The question is, how are recorded books working with
the new shuffles?
Thank you for your help
That depends on whether the audiobook is an audible.com download or not. Audibooks ripped from CDs work fine on either generation Shuffle.

Lost my i phone a few minutes ago- how do i find using app

cansomeone help ? i just lost my i phone while doing errands in nearby town. had successfully downloaded find iphone app yesterday. verified how it worked. i don't remember how to go about finding the present location of my phone. what do i do? dan

i dont think its a network problem............jus followed these 2 steps:
"1) Go to Settings > General > Date and Time. Switch off “Set Automatically” and manually select your hometown (the default is Cupertino). If you dont change it, you will not be able to make outgoing calls. But the wierd part is, you will still be able to receive incoming calls. Once done, manually set the date and time, and restart your iPhone. If you want, you can reset the 2 settings to “Set Automatically” again.
2) Next, go to Settings > Phone > Show My Caller ID > Switch this to “ON”. Usually with these steps, things should be okay already. If not, you have to turn off “Call Forwarding” and “Call Waiting” as well."
now its working:)

How to verify RTSJ use linux real time kernel?

Hi,
I'm complete newbie into this area and I'm trying out the RTSJ 2.1 beta Linux. I'm using this on Ubuntu with the linux real time kernel. Is there anyway to find out whether the real time kernel is being actually used or in other words is there a way to find out whether RTSJ works fine with the real time kernel on Ubuntu? I see that the programs get compiled and run irrespective of whether I use the real time kernel or the generic kernel.
Thanks,
Vidura

Hi,
I would assume, like other distributions, that you either boot the real-time kernel or you don't. uname should show you what you are running, but you'd have to ask the Ubuntu folk what you should see for the RT kernel.
To see if you are benefiting from real-time, you need to run a RTSJ app that tracks deadline misses or measures latency/jitter. Try it on the non-real-time kernel and the real-time one and see what you get. Some of the examples in the "Getting Started" guide should be usable for these purposes.
David Holmes

How to verify OC4J uses Oracle Toplink 10.x and not Toplink Essentials

Hi,
We dont want to use the default JPA provider "Toplink *Essentials*" that comes with OC4J. Rather we want to use Oracle Toplink 10.x
I downloaded [Oracle Toplink 10.x|http://www.oracle.com/technology/software/products/ias/htdocs/1013topsoft.html] and followed the installation instructions:- http://www.oracle.com/technology/products/ias/toplink/doc/10131/install/install.html#CHDBBIFB
When i deploy my EJB 3.0 appliation and invoke a JPA Entity, i can see the server log:- NOTIFICATION TopLink, version: Oracle TopLink Essentials - 2.0.1 (Build b09d-fcs (12/06/2007))
Do i have to do any other configuration/setting to ensure that i use Oracle Toplink and not Toplink Essentials in OC4J?
Thanks in Advance,
Prashant Tejura
Edited by: user1186295 on May 26, 2009 10:33 AM

rashant,
Hi, there are currently the following providers to choose from - you may want to consult your rep for any details on moving from 10.1.3.4 to 10.1.3.5.
1) TopLink or EclipseLink using EclipseLink JPA - the RI for JPA for WebLogic, OC4J and GlassFish
- EclipseLink JPA is focus of all current JPA development as part of EclipseLink and TopLink
2) Another open-source JPA implementation like OpenJPA or Hibernate
Deprecated:
3) TopLink using TopLink JPA - replaced by (1) TopLink using EclipseLink JPA
4) TopLink using TopLink Essentials JPA - replaced by (1) TopLink using EclipseLink JPA
Changes to server.xml as follows:
http://wiki.eclipse.org/EclipseLink/Examples/JPA/OC4J_Web_Tutorial#Modify_server.xml
<shared-library name="oracle.persistence" version="1.0" library-compatible="true">
          <code-source path="../../../eclipselink/eclipselink.jar"/>
          <code-source path="../../../eclipselink/javax.persistence_*.jar"/>
          <import-shared-library name="oracle.jdbc"/>
     </shared-library>
Changes to persistence.xml as follows: (container-managed JTA datasource)
http://wiki.eclipse.org/EclipseLink/Examples/JPA/OC4J_Web_Tutorial#Persistence.xml
<persistence version="1.0" xmlns="http://java.sun.com/xml/ns/persistence" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/persistence http://java.sun.com/xml/ns/persistence/persistence_1_0.xsd">
<persistence-unit name="example" transaction-type="JTA">
<provider>org.eclipse.persistence.jpa.PersistenceProvider</provider>
<jta-data-source>jdbc/OracleDS</jta-data-source>
<class>org.eclipse.persistence.example.jpa.server.business.Cell</class>
<properties>
<property name="eclipselink.target-server" value="OC4J"/>
<property name="eclipselink.logging.level" value="FINEST"/>
</properties>
</persistence-unit>
</persistence>
You should see output similar to the following in your server log:
http://wiki.eclipse.org/EclipseLink/Examples/JPA/OC4J_Web_Tutorial#Console_Output
[EL Finest]: 2009-02-26 14:04:34.464--ServerSession(8634980)--Thread(Thread[HTTPThreadGroup-4,5,HTTPThreadGroup])--Begin deploying Persistence Unit example; state Predeployed; factoryCount 1
[EL Info]: 2009-02-26 14:04:34.542--ServerSession(8634980)--Thread(Thread[HTTPThreadGroup-4,5,HTTPThreadGroup])--EclipseLink, version: Eclipse Persistence Services - ***
[EL Fine]: 2009-02-26 14:04:35.213--Thread(Thread[HTTPThreadGroup-4,5,HTTPThreadGroup])--Detected Vendor platform: org.eclipse.persistence.platform.database.oracle.Oracle10Platform
[EL Config]: 2009-02-26 14:04:35.26--ServerSession(8634980)--Connection(5230779)--Thread(Thread[HTTPThreadGroup-4,5,HTTPThreadGroup])--Connected: jdbc:oracle:thin:@//1y.yyy.yy.yy:1521/ORCL
     User: SCOTT
     Database: Oracle Version: Oracle Database 11g Release 11.1.0.0.0 - Production
     Driver: Oracle JDBC driver Version: 10.1.0.5.0
[EL Finest]: 2009-02-26 14:04:35.385--UnitOfWork(5746770)--Thread(Thread[HTTPThreadGroup-4,5,HTTPThreadGroup])--PERSIST operation called on: org.eclipse.persistence.example.jpa.server.business.Cell@9107088( id: null state: null left: null right: null parent: null references: null).
[EL Fine]: 2009-02-26 14:04:35.807--ClientSession(5748500)--Connection(6653899)--Thread(Thread[HTTPThreadGroup-4,5,HTTPThreadGroup])--INSERT INTO EL_CELL (ID, STATE, TSEQ, RIGHT_ID) VALUES (?, ?, ?, ?)
     bind => [551, null, null, null]
thank you
/michael
www.eclipselink.org

How to verify model using serial number

So, a replacement nano is on it's way (after Service Requested November 12th, "Issue identified Dec 12 2011" -- and shipped Dec 23 2011). How do I tell before it arrives which nano it will be? I cannot find where on Apple website I can enter my new Serial Number.

https://selfsolve.apple.com/GetWarranty.do

How to verify my app store account without having to use a credit card ?

How to verify my app store account without having to use a credit card ?

- Whenn Yhuu First Gett A Iphonee &&'d Wanna Set Uhpp A App Storee Account Will Thee Credit Card Stuff Bhee Ohnn There ?'. &&"d Do Yhuu Havee oo2 Confirm Thee Apple Account From Yahoo .com ?'.
Some Plz Help Lbvs I'vee Madee Likee 5 Alreadyy Ihmm Neww Do Ihtt '.

How can I get the apps that I paid for on iTunes and the app store I don't have a computer I paid for them using my ipad and everytime I try to redownload them it asks for my card number and when I put the number in it tells me that the number is not a wo

Ok can anyone tell how I can get the apps that I paid for on iTunes and the app store using my I pad because I don't have a computer and when I try to redownload the apps it keeps asking me for my card number and when I give it my card info it says that it's an invalid number when I know that it's not

If you are getting an 'invalid security code' message then is the address on your iTunes account exactly the same (format and spacing etc) as on your credit card bill : http://support.apple.com/kb/TS1646 ? If it is then you could try what it says at the bottom of that page :
If the issue persists, contact your credit card company and verify that they and any company they use to process credit card authorizations have the correct information on file.
And/or try contacting iTunes support : http://www.apple.com/support/itunes/contact/ - click on Express Lane, then iTunes > iTunes Store

How to restore an app to recently used app bar after deleting it from bar?

I frequently have to kill an app (GPS Drive) in order to get it to work properly alongside another app (HiDef Radio). Reason being: When I use the two apps at the same time, the HiDef Radio frequently renders the live voice guidance on GPS Drive inoperable. A customer support representative for GPS Drive advised me to kill GPS Drive, using the recently used apps bar, and re-open it when this happens. (The representative also said that they just submitted a new version of GPS Drive to Apple, which should hopefully fix this problem, but in the meantime, I'm stuck not being able to listen to the radio and use live voice guidance at the same time.)
To kill GPS Drive, I followed the instructions in the iPhone 4.1 manual:
"Remove an app from the recents list: Touch and hold the app icon until it begins to jiggle, then tap [the red minus]."
The manual then states, "The app is added to recent apps again the next time you open it."
Problem is, contrary to what the manual says, GPS Drive is not added to recent apps again the next time I open it. And since it's not added back to the recent apps bar, I can't kill it next time I have this conflict with HiDef Radio. So the problem remains.
Is this—the fact that the app is not added to recent apps again the next time I open it—some sort of bug? (And, if so, is the bug Apple's, or GPS Drive's?) Or am I missing something? (And, if so, how do I make the app re-appear in the recently used apps bar after removing it from said bar?)
If anyone is wondering how I know that removing an app from the recently used apps bar kills it, see this, from http://support.apple.com/kb/HT4211 :
"If you experience issues with applications that use multitasking, try these steps to troubleshoot:
"1. Check the App Store to verify the application supports multitasking. You can also check the developer's webpage.
"2. Close the application and reopen it:
" 1. Double-click the Home button to load recently used apps:
" 2. Select the application by tapping and holding on the application until the red minus appears:
" 3. Tap the red minus to quit the application. This also removes an application from recently used apps."
Thanks in advance for your help.

I just discovered the answer to my question. Apparently, when you're in an app, that app does not appear in the recently used apps bar. This is logical in one sense: You can't switch to an app that you're already in. However, in another sense, it is illogical: In most operating systems, when you want to kill an app, you can kill the app without exiting the app (which is necessary in cases in which a freeze prevents you from exiting the app) by using a keystroke or directly entering a task manager. Given that the recently used apps bar serves two purposes—fast app switching and killing problematic apps—what makes sense for one purpose doesn't make sense for the other purpose. Anyway, the moral of the story is this: If you want to kill an app using iOS 4, you have to exit it first. Problem solved.

How do I fix the App Store cannot verify a secure connection with the App Store. in mountain lion tried safari reset, changing the MTU nothing works

Hi all,
how do I fix the App Store cannot verify a secure connection with the App Store. in mountain lion tried safari reset, changing the MTU nothing works at this time. I am using a IMac ML 10.8.2
Would like some help please.
Gee

Hi all,
how do I fix the App Store cannot verify a secure connection with the App Store. in mountain lion tried safari reset, changing the MTU nothing works at this time. I am using a IMac ML 10.8.2
Would like some help please.
Gee

Ok, I have two itunes library account one for the PC and one for my Mac, I have my first iphone on my PC, but i just upgrade and I would like to use my new iphone on my Mac but all of my apps and other stuff is in the first library.. How do I put my apps

ok, I have two itunes librarys account, one for my PC and one for my Mac, I use the PC for my iphone, but I upgrade my iphone and all my apps and
stuff is on the first itunes library. How do I put the apps from one iphone to the otherusing two dirffernt itunes library? please help..

Drrhythm2 wrote:
What's the best solution for this? I
Copy the entire /Music/iTunes/ folder from her old compouter to /Music/ in her account on this new computer.

How do I transfer an app from itunes my pc to my iphone 4s? I cant use wifi as my chip fried at the last update

How can I transfer an App purchased on iTunes on my pc to my iPhone 4s. I have tried synching but this does not make the app appear on my iPhone. I cant use wifi as my chip was fried on the latest update.

When you tried syncing, did you connect the phone, then click on the phone icon near the top left of iTunes, then click on Apps under Settings in the sidebar, then find the app in question and click the Install button beside it before clicking Sync at the bottom right?

How do i update my apps on my iphone using itunes 11.0.0.163

How do i update my apps on my iphone using itunes 11.0.0.163

I click update on the app or try to purchase an app and it asks for my password. I enter my password, the icon spins and then just goes back to saying update or purchase. I have tried resetting my settings and shutting my phone off and nothing has seemed to work.

How do I resolve the App Store using another apple id within my family

First time post - please forgive any errors.
I've upgraded to an iPhone 6 from a 4S. I used iTunes on my home computer to perform the backup and restore. It worked great. I can purchase new apps and the correct apple id is shown. The problem is when updating existing apps. The app store requests that I enter my password but the apple id displayed is from my wife's device. I've shut the phone off/on. I've signed out of my apple id and signed back in. Her apple id continues to display. I don't know how to make it use mine - which shows up settings->iTunes and App store.
Thanks in advance for your help.

Colts Fan 317 wrote:
First time post - please forgive an errors.
I've upgraded to an iPhone 6 from a 4S. I used iTunes on my home computer to perform the backup and restore. It worked great. I can purchase new apps and the correct apple id is shown. The problem is when updating existing apps. The app store requests that I enter my password but the apple id displayed is from my wife's device. I've shut the phone off/on. I've signed out of my apple id and signed back in. Her apple id continues to display. I don't know how to make it use mine - which shows up settings->iTunes and App store.
Thanks in advance for your help.
There is no changing apple id for said app, as you downloaded an app with your wife's apple id, or sync an app that your wife downloaded.
You will need her credentials to update the app, or delete and reinstall with your apple id.

How to verify to use apps

Similar Messages

Maybe you are looking for