How to Verify whether CAPolicy.inf Configuration was picked correctly or not ?
Hi ALL,
can you please suggest me a way to verify whether CAPolicy.inf Configuration was picked correctly or not during CA installation and if it was not picked up correctly where can I see the error messages what exactly went wrong ?.
Hi,
I do not know anything about a logfile but if it was picked up then you see the settings in the certificate (e.g. keylength) or the settings for AIA/CDP are visible in the CA MMC in the externsions tab.
A not uncommon issue is that the file itself is saved as capoily.inf.txt file from notepad and then the CA install wizard ignores the file. so check the filename from a Windows command prompt.
Hope that helps,
Lutz
Similar Messages
-
How to verify whether the persistence unit objects are persistent or not?
How to verify whether the persistence unit objects are persistent or not?
I have successfully configure and deploy the Employees object as a persistence unit in Oracle Coherence according to the guide of Chapter 6 of Tutorial for Oracle Coherence 3.5.
Using the RunEmployeeExample script, I have got the right results. I can see that after the cache object is updated, the database table (Employees) is also updated accordingly. The following is the output:
2009-11-05 11:09:55.043/53.467 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=1): Member(Id=2, Timestamp=2009-11-05 11:09:54.867, Add
ress=192.168.8.80:8089, MachineId=24656, Location=process:1684, Role=OracleRunEmployeeExample) joined Cluster with senior member 1
2009-11-05 11:09:55.604/54.028 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=1): Member 2 joined Service Management with senior memb
er 1
2009-11-05 11:09:56.885/55.309 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=1): TcpRing: connecting to member 2 using TcpSocket{Sta
te=STATE_OPEN, Socket=Socket[addr=/192.168.8.80,port=8089,localport=4084]}
2009-11-05 11:09:57.847/56.281 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=1): Member 2 joined Service JpaDistributedCache with se
nior member 1
2009-11-05 11:09:57.917/56.341 Oracle Coherence GE 3.5.2/463 <D5> (thread=DistributedCache:JpaDistributedCache, member=1): Service JpaDistributed
Cache: sending ServiceConfigSync containing 258 entries to Member 2
2009-11-05 11:10:04.086/62.510 Oracle Coherence GE 3.5.2/463 <D5> (thread=DistributedCache:JpaDistributedCache, member=1): Deferring the distribu
tion due to 1 pending configuration updates
[EL Info]: 2009-11-05 11:10:14.36--ServerSession(2883071)--EclipseLink, version: Eclipse Persistence Services - 1.1.1.v20090430-r4097
[EL Info]: 2009-11-05 11:10:22.312--ServerSession(2883071)--file:/C:/JDeveloper/mywork/AppJPA/JPA/classes/-JPA login successful
2009-11-05 11:10:24.305/82.729 Oracle Coherence GE 3.5.2/463 <D5> (thread=DistributedCache:JpaDistributedCache, member=1): 3> Transferring 128 ou
t of 257 primary partitions to member 2 requesting 128
2009-11-05 11:10:25.697/84.121 Oracle Coherence GE 3.5.2/463 <D4> (thread=DistributedCache:JpaDistributedCache, member=1): 1> Transferring 129 ou
t of 129 partitions to a node-safe backup 1 at member 2 (under 129)
2009-11-05 11:10:25.857/84.281 Oracle Coherence GE 3.5.2/463 <D5> (thread=DistributedCache:JpaDistributedCache, member=1): Transferring 0KB of ba
ckup[1] for PartitionSet{128, 129, 130, 131, 132, 133, 134, 135, 136, 137, 138, 139, 140, 141, 142, 143, 144, 145, 146, 147, 148, 149, 150, 151,
152, 153, 154, 155, 156, 157, 158, 159, 160, 161, 162, 163, 164, 165, 166, 167, 168, 169, 170, 171, 172, 173, 174, 175, 176, 177, 178, 179, 180,
181, 182, 183, 184, 185, 186, 187, 188, 189, 190, 191, 192, 193, 194, 195, 196, 197, 198, 199, 200, 201, 202, 203, 204, 205, 206, 207, 208, 209,
210, 211, 212, 213, 214, 215, 216, 217, 218, 219, 220, 221, 222, 223, 224, 225, 226, 227, 228, 229, 230, 231, 232, 233, 234, 235, 236, 237, 238,
239, 240, 241, 242, 243, 244, 245, 246, 247, 248, 249, 250, 251, 252, 253, 254, 255, 256} to member 2
2009-11-05 11:10:40.678/99.102 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=1): TcpRing: disconnected from member 2 due to a kill r
equest
2009-11-05 11:10:40.678/99.102 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=1): Member 2 left service Management with senior member
1
2009-11-05 11:10:40.678/99.102 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=1): Member 2 left service JpaDistributedCache with seni
or member 1
2009-11-05 11:10:40.708/99.132 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=1): Member(Id=2, Timestamp=2009-11-05 11:10:40.708, Add
ress=192.168.8.80:8089, MachineId=24656, Location=process:1684, Role=OracleRunEmployeeExample) left Cluster with senior member 1
2009-11-05 11:10:40.879/99.303 Oracle Coherence GE 3.5.2/463 <Info> (thread=DistributedCache:JpaDistributedCache, member=1): Restored from backup
128 partitions
2009-11-05 11:10:40.879/99.303 Oracle Coherence GE 3.5.2/463 <D4> (thread=DistributedCache:JpaDistributedCache, member=1): 0, 1, 2, 3, 4, 5, 6, 7
, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 4
4, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, 80
, 81, 82, 83, 84, 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99, 100, 101, 102, 103, 104, 105, 106, 107, 108, 109, 110, 111, 112, 11
3, 114, 115, 116, 117, 118, 119, 120, 121, 122, 123, 124, 125, 126, 127,
2009-11-05 11:28:39.800/1178.224 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=1): Member(Id=2, Timestamp=2009-11-05 11:28:39.635, A
ddress=192.168.8.80:8089, MachineId=24656, Location=site:metsys.metex.com,machine:mw12,process:1752, Role=CoherenceConsole) joined Cluster with s
enior member 1
2009-11-05 11:28:40.231/1178.655 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=1): Member 2 joined Service Management with senior me
mber 1
2009-11-05 11:28:41.633/1180.057 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=1): TcpRing: connecting to member 2 using TcpSocket{S
tate=STATE_OPEN, Socket=Socket[addr=/192.168.8.80,port=8089,localport=4143]}
2009-11-05 11:30:01.658/1260.082 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=1): Member 2 joined Service DistributedCache with sen
ior member 2But I cannot verify if the persistence unit is still persistent.
Edited by: jetq on Nov 5, 2009 11:49 AMI start a Coherence Console in another Windows Command Prompt as the following:
D:\coherence\bin> coherence.cmd
** Starting storage disabled console **
java version "1.6.0_11"
Oracle Coherence Version 3.5.2/463
Grid Edition: Development mode
Copyright (c) 2000, 2009, Oracle and/or its affiliates. All rights reserved.
2009-11-05 11:57:22.167/9.734 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=n/a): Service Cluster joined th
e cluster with senior service member n/a
2009-11-05 11:57:22.197/9.764 Oracle Coherence GE 3.5.2/463 <Info> (thread=Cluster, member=n/a): Failed to satisfy the v
ariance: allowed=16, actual=20
2009-11-05 11:57:22.197/9.764 Oracle Coherence GE 3.5.2/463 <Info> (thread=Cluster, member=n/a): Increasing allowable va
riance to 17
2009-11-05 11:57:22.677/10.244 Oracle Coherence GE 3.5.2/463 <Info> (thread=Cluster, member=n/a): This Member(Id=3, Time
stamp=2009-11-05 11:57:22.392, Address=192.168.8.80:8089, MachineId=24656, Location=process:460, Role=CoherenceConsole,
Edition=Grid Edition, Mode=Development, CpuCount=1, SocketCount=1) joined cluster "cluster:0xD3FB" with senior Member(Id
=1, Timestamp=2009-11-05 11:09:09.738, Address=192.168.8.80:8088, MachineId=24656, Location=process:1816, Role=Coherence
Server, Edition=Grid Edition, Mode=Development, CpuCount=1, SocketCount=1)
2009-11-05 11:57:22.737/10.304 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=n/a): Member 1 joined Service
Management with senior member 1
2009-11-05 11:57:22.737/10.304 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=n/a): Member 1 joined Service
JpaDistributedCache with senior member 1
2009-11-05 11:57:23.108/10.675 Oracle Coherence GE 3.5.2/463 <D5> (thread=Invocation:Management, member=3): Service Mana
gement joined the cluster with senior service member 1
2009-11-05 11:57:23.759/11.326 Oracle Coherence GE 3.5.2/463 <D5> (thread=TcpRingListener, member=3): TcpRing: connectin
g to member 1 using TcpSocket{State=STATE_OPEN, Socket=Socket[addr=/192.168.8.80,port=4168,localport=8089]}
SafeCluster: Name=cluster:0xD3FB
Group{Address=224.3.5.2, Port=35463, TTL=4}The previous output shows that this Coherence console (the client side) has already joined the JPA server.
But the following output shows us that this console cannot access the Employees cache and cannot get the object entry. Why?
Map (?): cache Employees
2009-11-05 12:11:41.653/869.220 Oracle Coherence GE 3.5.2/463 <Info> (thread=main, member=3): Loaded cache configuration
from "jar:file:/D:/coherence/lib/coherence.jar!/coherence-cache-config.xml"
2009-11-05 12:11:43.055/870.622 Oracle Coherence GE 3.5.2/463 <D5> (thread=DistributedCache, member=3): Service Distribu
tedCache joined the cluster with senior service member 3
<distributed-scheme>
<!--
To use POF serialization for this partitioned service,
uncomment the following section
<serializer>
<class-
name>com.tangosol.io.pof.ConfigurablePofContext</class-
name>
</serializer>
-->
<scheme-name>example-distributed</scheme-name>
<service-name>DistributedCache</service-name>
<backing-map-scheme>
<local-scheme>
<scheme-ref>example-binary-backing-map</scheme-ref>
</local-scheme>
</backing-map-scheme>
<autostart>true</autostart>
</distributed-scheme>
Map (Employees): list
2009-11-05 12:11:48.402/875.969 Oracle Coherence GE 3.5.2/463 <Error> (thread=main, member=3):
java.lang.RuntimeException: Storage is not configured
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$BinaryMap.onMissing
Storage(DistributedCache.CDB:9)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$BinaryMap.ensureReq
uestTarget(DistributedCache.CDB:33)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$BinaryMap.sendParti
tionedRequest(DistributedCache.CDB:31)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$BinaryMap.size(Dist
ributedCache.CDB:13)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$BinaryMap$EntrySet.
size(DistributedCache.CDB:1)
at com.tangosol.util.ConverterCollections$ConverterEntrySet.size(ConverterCollections.java:2720)
at com.tangosol.coherence.component.application.console.Coherence.doList(Coherence.CDB:74)
at com.tangosol.coherence.component.application.console.Coherence.processCommand(Coherence.CDB:442)
at com.tangosol.coherence.component.application.console.Coherence.run(Coherence.CDB:39)
at com.tangosol.coherence.component.application.console.Coherence.main(Coherence.CDB:3)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.tangosol.net.CacheFactory.main(CacheFactory.java:1400)Edited by: jetq on Nov 5, 2009 12:18 PM -
How to verify that standby and primary are working correctly or not
Hi,
Oracle Version : 10.2.0.1.0
OperatingSystem : WindowsXp
I have configured a stand by database on my local database.Here i would like to know weather by stand by is configured correctly and working fine are not.
Please help me.
Thank & Regards
Poorna Prasad.Hi,
When i issue these statements in my primary database the output is like this
SQL> SELECT SEQUENCE#, FIRST_TIME, NEXT_TIME FROM V$ARCHIVED_LOG ORDER BY SEQUENCE#;
SEQUENCE# FIRST_TIM NEXT_TIME
169 19-AUG-09 20-AUG-09
170 20-AUG-09 20-AUG-09
171 20-AUG-09 20-AUG-09
172 20-AUG-09 20-AUG-09
173 20-AUG-09 20-AUG-09
174 20-AUG-09 21-AUG-09
175 21-AUG-09 21-AUG-09
176 21-AUG-09 22-AUG-09
177 22-AUG-09 22-AUG-09
178 22-AUG-09 23-AUG-09
179 23-AUG-09 23-AUG-09
SEQUENCE# FIRST_TIM NEXT_TIME
180 23-AUG-09 24-AUG-09
180 23-AUG-09 24-AUG-09
181 24-AUG-09 24-AUG-09
181 24-AUG-09 24-AUG-09
182 24-AUG-09 24-AUG-09
182 24-AUG-09 24-AUG-09
183 24-AUG-09 24-AUG-09
183 24-AUG-09 24-AUG-09
184 24-AUG-09 24-AUG-09
184 24-AUG-09 24-AUG-09
185 24-AUG-09 24-AUG-09
SEQUENCE# FIRST_TIM NEXT_TIME
185 24-AUG-09 24-AUG-09
186 24-AUG-09 25-AUG-09
186 24-AUG-09 25-AUG-09
187 25-AUG-09 25-AUG-09
187 25-AUG-09 25-AUG-09
188 25-AUG-09 25-AUG-09
188 25-AUG-09 25-AUG-09
189 25-AUG-09 25-AUG-09
190 25-AUG-09 25-AUG-09
31 rows selected.
SQL> select * from v$dataguard_status;
FACILITY SEVERITY DEST_ID MESSAGE_NUM ERROR_CODE CAL TIMESTAMP MESSAGE
Log Transport Services Informational 0 1 0 NO 25-AUG-09 ARC0: Archival started
Log Transport Services Informational 0 2 0 NO 25-AUG-09 ARC1: Archival started
Log Transport Services Informational 0 3 0 NO 25-AUG-09 ARC2: Archival started
Log Transport Services Informational 0 4 0 NO 25-AUG-09 ARC3: Archival started
Log Transport Services Informational 0 5 0 NO 25-AUG-09 ARC4: Archival started
Log Transport Services Informational 0 6 0 NO 25-AUG-09 ARC5: Archival started
Log Transport Services Informational 0 7 0 NO 25-AUG-09 ARC6: Archival started
Log Transport Services Informational 0 8 0 NO 25-AUG-09 ARC7: Archival started
Log Transport Services Informational 0 9 0 NO 25-AUG-09 ARC8: Archival started
Log Transport Services Informational 0 10 0 NO 25-AUG-09 ARC9: Archival started
Log Transport Services Informational 0 11 0 NO 25-AUG-09 ARCa: Archival started
FACILITY SEVERITY DEST_ID MESSAGE_NUM ERROR_CODE CAL TIMESTAMP MESSAGE
Log Transport Services Informational 0 12 0 NO 25-AUG-09 ARCb: Archival started
Log Transport Services Informational 0 13 0 NO 25-AUG-09 ARCc: Archival started
Log Transport Services Informational 0 14 0 NO 25-AUG-09 ARCd: Archival started
Log Transport Services Informational 0 15 0 NO 25-AUG-09 ARCe: Archival started
Log Transport Services Informational 0 16 0 NO 25-AUG-09 ARCf: Archival started
Log Transport Services Informational 0 17 0 NO 25-AUG-09 ARCg: Archival started
Log Transport Services Informational 0 18 0 NO 25-AUG-09 ARCh: Archival started
Log Transport Services Informational 0 19 0 NO 25-AUG-09 ARCi: Archival started
Log Transport Services Informational 0 20 0 NO 25-AUG-09 ARCj: Archival started
Log Transport Services Informational 0 21 0 NO 25-AUG-09 ARCk: Archival started
Log Transport Services Informational 0 22 0 NO 25-AUG-09 ARCl: Archival started
FACILITY SEVERITY DEST_ID MESSAGE_NUM ERROR_CODE CAL TIMESTAMP MESSAGE
Log Transport Services Informational 0 23 0 NO 25-AUG-09 ARCm: Archival started
Log Transport Services Informational 0 24 0 NO 25-AUG-09 ARCn: Archival started
Log Transport Services Informational 0 25 0 NO 25-AUG-09 ARCo: Archival started
Log Transport Services Informational 0 26 0 NO 25-AUG-09 ARCp: Archival started
Log Transport Services Informational 0 27 0 NO 25-AUG-09 ARCq: Archival started
Log Transport Services Informational 0 28 0 NO 25-AUG-09 ARCr: Archival started
Log Transport Services Informational 0 29 0 NO 25-AUG-09 ARCs: Archival started
Log Transport Services Informational 0 30 0 NO 25-AUG-09 ARCt: Archival started
Log Transport Services Informational 0 31 0 NO 25-AUG-09 ARCi: Becoming the 'no FAL' ARCH
Log Transport Services Informational 0 32 0 NO 25-AUG-09 ARCi: Becoming the 'no SRL' ARCH
Log Transport Services Informational 0 33 0 NO 25-AUG-09 ARCl: Becoming the heartbeat ARCH
FACILITY SEVERITY DEST_ID MESSAGE_NUM ERROR_CODE CAL TIMESTAMP MESSAGE
Log Transport Services Error 0 34 1017 YES 25-AUG-09 Error 1017 received logging on to the standby
Fetch Archive Log Error 2 35 16191 YES 25-AUG-09 FAL[server, ARC0]: Error 16191 creating remote archivelog file 'stand'
Log Transport Services Error 0 36 1017 YES 25-AUG-09 Error 1017 received logging on to the standby
Log Transport Services Error 2 37 16191 YES 25-AUG-09 PING[ARCl]: Heartbeat failed to connect to standby 'stand'. Error is 16191.
Log Transport Services Error 0 38 1017 YES 25-AUG-09 Error 1017 received logging on to the standby
Log Transport Services Error 2 39 16191 YES 25-AUG-09 PING[ARCl]: Heartbeat failed to connect to standby 'stand'. Error is 16191.
Log Transport Services Error 0 40 1017 YES 25-AUG-09 Error 1017 received logging on to the standby
Log Transport Services Error 2 41 16191 YES 25-AUG-09 PING[ARCl]: Heartbeat failed to connect to standby 'stand'. Error is 16191.
Log Transport Services Error 0 42 12518 YES 25-AUG-09 Error 12518 received logging on to the standby
Log Transport Services Error 2 43 12518 YES 25-AUG-09 PING[ARCl]: Heartbeat failed to connect to standby 'stand'. Error is 12518.
Log Transport Services Error 0 44 1017 YES 25-AUG-09 Error 1017 received logging on to the standby
FACILITY SEVERITY DEST_ID MESSAGE_NUM ERROR_CODE CAL TIMESTAMP MESSAGE
Log Transport Services Error 2 45 16191 YES 25-AUG-09 PING[ARCl]: Heartbeat failed to connect to standby 'stand'. Error is 16191.
Log Transport Services Error 0 46 1017 YES 25-AUG-09 Error 1017 received logging on to the standby
Log Transport Services Error 2 47 16191 YES 25-AUG-09 PING[ARCl]: Heartbeat failed to connect to standby 'stand'. Error is 16191.
Log Transport Services Error 0 48 1017 YES 25-AUG-09 Error 1017 received logging on to the standby
Log Transport Services Error 2 49 16191 YES 25-AUG-09 PING[ARCl]: Heartbeat failed to connect to standby 'stand'. Error is 16191.
Log Transport Services Error 0 50 1017 YES 25-AUG-09 Error 1017 received logging on to the standby
Log Transport Services Error 2 51 16191 YES 25-AUG-09 PING[ARCl]: Heartbeat failed to connect to standby 'stand'. Error is 16191.
Log Transport Services Error 0 52 1017 YES 25-AUG-09 Error 1017 received logging on to the standby
Log Transport Services Error 2 53 16191 YES 25-AUG-09 PING[ARCl]: Heartbeat failed to connect to standby 'stand'. Error is 16191.
Log Transport Services Error 0 54 1017 YES 25-AUG-09 Error 1017 received logging on to the standby
Log Transport Services Error 2 55 16191 YES 25-AUG-09 PING[ARCl]: Heartbeat failed to connect to standby 'stand'. Error is 16191.
FACILITY SEVERITY DEST_ID MESSAGE_NUM ERROR_CODE CAL TIMESTAMP MESSAGE
Log Transport Services Error 0 56 1017 YES 25-AUG-09 Error 1017 received logging on to the standby
Log Transport Services Error 2 57 16191 YES 25-AUG-09 PING[ARCl]: Heartbeat failed to connect to standby 'stand'. Error is 16191.
Log Transport Services Error 0 58 1017 YES 25-AUG-09 Error 1017 received logging on to the standby
Log Transport Services Error 2 59 16191 YES 25-AUG-09 PING[ARCl]: Heartbeat failed to connect to standby 'stand'. Error is 16191.
Log Transport Services Error 0 60 1017 YES 25-AUG-09 Error 1017 received logging on to the standby
Log Transport Services Error 2 61 16191 YES 25-AUG-09 PING[ARCl]: Heartbeat failed to connect to standby 'stand'. Error is 16191.
Log Transport Services Error 0 62 1017 YES 25-AUG-09 Error 1017 received logging on to the standby
Log Transport Services Error 2 63 16191 YES 25-AUG-09 PING[ARCl]: Heartbeat failed to connect to standby 'stand'. Error is 16191.
Log Transport Services Error 0 64 1017 YES 25-AUG-09 Error 1017 received logging on to the standby
Log Transport Services Error 2 65 16191 YES 25-AUG-09 PING[ARCl]: Heartbeat failed to connect to standby 'stand'. Error is 16191.
Log Transport Services Error 0 66 1017 YES 25-AUG-09 Error 1017 received logging on to the standby
FACILITY SEVERITY DEST_ID MESSAGE_NUM ERROR_CODE CAL TIMESTAMP MESSAGE
Log Transport Services Error 2 67 16191 YES 25-AUG-09 PING[ARCl]: Heartbeat failed to connect to standby 'stand'. Error is 16191.and when i issue these statements in my stand by the output is.
SQL> select * from V$managed_standby;
PROCESS PID STATUS CLIENT_P CLIENT_PID CLIENT_DBID GROUP# RESETLOG_ID THREAD# SEQUENCE# BLOCK# BLOCKS DELAY_MINS KNOWN_AGENTS ACTIVE_AGENTS
ARCH 4504 CONNECTED ARCH 4504 1560521699 N/A 0 0 0 0 0 0 0 0
ARCH 3440 CONNECTED ARCH 3440 1560521699 N/A 0 0 0 0 0 0 0 0
ARCH 5504 CONNECTED ARCH 5504 1560521699 N/A 0 0 0 0 0 0 0 0
ARCH 5352 CONNECTED ARCH 5352 1560521699 N/A 0 0 0 0 0 0 0 0
ARCH 5344 CONNECTED ARCH 5344 1560521699 N/A 0 0 0 0 0 0 0 0
ARCH 1320 CONNECTED ARCH 1320 1560521699 N/A 0 0 0 0 0 0 0 0
ARCH 5088 CONNECTED ARCH 5088 1560521699 N/A 0 0 0 0 0 0 0 0
ARCH 3416 CONNECTED ARCH 3416 1560521699 N/A 0 0 0 0 0 0 0 0
ARCH 5916 CONNECTED ARCH 5916 1560521699 N/A 0 0 0 0 0 0 0 0
ARCH 5776 CONNECTED ARCH 5776 1560521699 N/A 0 0 0 0 0 0 0 0
ARCH 4744 CONNECTED ARCH 4744 1560521699 N/A 0 0 0 0 0 0 0 0
PROCESS PID STATUS CLIENT_P CLIENT_PID CLIENT_DBID GROUP# RESETLOG_ID THREAD# SEQUENCE# BLOCK# BLOCKS DELAY_MINS KNOWN_AGENTS ACTIVE_AGENTS
ARCH 1144 CONNECTED ARCH 1144 1560521699 N/A 0 0 0 0 0 0 0 0
ARCH 5900 CONNECTED ARCH 5900 1560521699 N/A 0 0 0 0 0 0 0 0
ARCH 4848 CONNECTED ARCH 4848 1560521699 N/A 0 0 0 0 0 0 0 0
ARCH 5560 CONNECTED ARCH 5560 1560521699 N/A 0 0 0 0 0 0 0 0
ARCH 4672 CONNECTED ARCH 4672 1560521699 N/A 0 0 0 0 0 0 0 0
ARCH 400 CONNECTED ARCH 400 1560521699 N/A 0 0 0 0 0 0 0 0
ARCH 4996 CONNECTED ARCH 4996 1560521699 N/A 0 0 0 0 0 0 0 0
ARCH 5356 CONNECTED ARCH 5356 1560521699 N/A 0 0 0 0 0 0 0 0
ARCH 5800 CONNECTED ARCH 5800 1560521699 N/A 0 0 0 0 0 0 0 0
ARCH 3104 CONNECTED ARCH 3104 1560521699 N/A 0 0 0 0 0 0 0 0
ARCH 6100 CONNECTED ARCH 6100 1560521699 N/A 0 0 0 0 0 0 0 0
PROCESS PID STATUS CLIENT_P CLIENT_PID CLIENT_DBID GROUP# RESETLOG_ID THREAD# SEQUENCE# BLOCK# BLOCKS DELAY_MINS KNOWN_AGENTS ACTIVE_AGENTS
ARCH 2400 CONNECTED ARCH 2400 1560521699 N/A 0 0 0 0 0 0 0 0
ARCH 3712 CONNECTED ARCH 3712 1560521699 N/A 0 0 0 0 0 0 0 0
ARCH 4248 CONNECTED ARCH 4248 1560521699 N/A 0 0 0 0 0 0 0 0
ARCH 5580 CONNECTED ARCH 5580 1560521699 N/A 0 0 0 0 0 0 0 0
ARCH 3160 CONNECTED ARCH 3160 1560521699 N/A 0 0 0 0 0 0 0 0
ARCH 4436 CONNECTED ARCH 4436 1560521699 N/A 0 0 0 0 0 0 0 0
ARCH 5116 CONNECTED ARCH 5116 1560521699 N/A 0 0 0 0 0 0 0 0
ARCH 1488 CONNECTED ARCH 1488 1560521699 N/A 0 0 0 0 0 0 0 0
MRP0 4464 WAIT_FOR_LOG N/A N/A N/A N/A 687453795 1 189 0 0 0 0 0
31 rows selected.Regards
Poorna -
Verify whether the dispatcher configured has registered with the l
Hi,
How to verify whether the dispatcher configured has registered with the listener after the database startup?
I think this task is possible with "lsnrctl services"
bt dnt knw how to figure out.....
plz let me know how to do this ..... how to verify whether the dispatcher configured...by looking at the below code segment. .....
LSNRCTL> services
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=linux-tkuk.site)(PORT=15 21)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Service "orcl" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:89 refused:0 state:ready
LOCAL SERVER
Service "orclXDB" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
Handler(s):
"D000" established:0 refused:0 current:0 max:972 state:ready
DISPATCHER <machine: linux-tkuk, pid: 7417>
(ADDRESS=(PROTOCOL=tcp)(HOST=linux-tkuk.site)(PORT=13729))
Service "orcl_XPT" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:89 refused:0 state:ready
LOCAL SERVER
The command completed successfully
LSNRCTL>"D000" established:0 refused:0 current:0 max:972 state:ready
DISPATCHER <machine: linux-tkuk, pid: 7417>You have a dispatcher D000 registered with listener listening on PORT=13729 -
How to verify whether the signature is updated?
How to verify whether the signature of anti-spam and anti-virus is updated??
If you are at the CLI and use antivirusstatus it also shows when the last update was done and when the last successfully was done. When it was successful the pattern are up to date.
Same it true for antispam (antispamstatus)
Best Regards,
Mark -
How do I recover a file what was written in the 'notes' app that I have accidentally deleted?
how do I recover a file what was written in the 'notes' app that I have accidentally deleted?
If you have an iTunes backup or iCloud backup containing that note you can restore from that backup.
If you have no backups the note is gone. -
How to check whether a Document in KM is classified or not using JAVA API
Hello Everyone,
Can anyone tell me, How to check whether a Document in KM is classified or not, using JAVA API's??
Thanks & Regards,
Adren D'SouzaHi,
The code is as follows:
IIndexService indexService = null;
try {
indexService = (IIndexService) ResourceFactory.getInstance().getServiceFactory().getService(IServiceTypesConst.INDEX_SERVICE);
} catch (ResourceException e) {
if (indexService == null) {
log.errorT("Error on instanciating the index service");
return this.renderMessage(this.getBundleString(RES_NO_INDEX_SERVICE), StatusType.ERROR);
// get index
IIndex index = null;
try {
index = indexService.getIndex("YourIndexID");
} catch (WcmException e1) {
log.errorT("Error when trying to get the index");
return this.renderMessage(this.getBundleString(RES_NO_INDEX), StatusType.ERROR);
// check if the index is a instance of AbstractClassificationIndex
AbstractClassificationIndex classiIndex = null;
if (index instanceof AbstractClassificationIndex) {
classiIndex = (AbstractClassificationIndex) index;
} else {
log.errorT("The index " + index.getIndexName() + " is no classification index");
return this.renderMessage(this.getBundleString(RES_NO_CLASSIFICATION_INDEX), StatusType.WARNING);
//give your KM Resource here for which you want to know if it is classified or not
boolean classified = classiIndex.isDocClassifiedInAnyTax(resource);
Regards,
Praveen Gudapati -
How do i finish a download that was already started and not finished because the library closed befo
how do i finish a download that was already started and not finished because the library closed before it done
What are you trying to download and how were you downloading it?
-
How can I recover a iMessage that was deleted and if not is there a way apple can send me email of all my iMessages in past month
Hi Toniann,
If you have a recent iCloud backup that was done when that message was on the devcie, you can restore from that backup.
No, Apple does not keep your messages, no do they have access to them. That would be a serious invasion of privacy, don't you think?
GB -
How to check whether my iphone 5 is factory unlocked or not??
how to check whether my iphone 5 is factory unlocked or not??
Did you buy it unlocked at full, non-subsidised price? If not, then it's not unlocked.
-
How to identify whether that particular process chain is active or not?
Hi all,
How to identify whether that particular process chain is active or not ?
thanxs
harithaIf see the process chain then it will not be greyed out if it is active. Or else check in these tables.
RSPCCHAIN
RSPCCHAINT
to check the logs
RSPCLOGS
RSPCPROCESSLOG
Give the chain name and check in the object version.
Khaja -
How to check whether a char string is in uppercase or not
Hi,
I know how to convert strings to change strings to uppercase or lowercase, but is there any function to check, beforehand, if the field is in uppercase, for instance ? The intention here is simply to spare processing in situations where the string is already in uppercase, and thus not needing any further processing (given I want to turn the string into uppercase.)
Thanks in advance,
AvrahamHi Avraham ,
To check whether the string is in upper case or not use CA keyward.
To check try the following code ---
DATA : W_STRING(5) TYPE C,
W_ABCDE(26) TYPE C VALUE 'abcdefghijklmnopqrstuvwxyz'.
w_string = 'abcd'.
IF W_STRING CA W_ABCDE.
TRANSLATE w_string TO UPPER CASE.
ELSE.
MESSAGE 'It is a uppercase string' TYPE 'S'.
ENDIF.
Try this link this will definitely help you -
https://wiki.sdn.sap.com/wiki/display/ABAP/Validationofastringintermsof+case
Regards
Pinaki -
How to check whether weblogic server is in DEBUG mode or not
Hi
I want to check in my OSB proxy whether weblogic server is in Debug mode or not?
IF abv thing is not possible ,
I have check whether server is in development mode or production mode from my OSB proxy service?
I m not able to find any doc on this??Please let me know how it can be done?
ThanksThere isnt any other way except for doing a Java Callout. In the callout method you can access the Domain/Server MBean for the information that you seek. Based on the callout result you can go ahead with the logic in your PS..
Here is a sample Java Code to get the Server Log Level and ascertain whether the server is in Production Mode or not.
package com.dell.mbean;
import java.io.IOException;
import java.net.MalformedURLException;
import java.util.Hashtable;
import javax.management.MBeanServerConnection;
import javax.management.MalformedObjectNameException;
import javax.management.ObjectName;
import javax.management.remote.JMXConnector;
import javax.management.remote.JMXConnectorFactory;
import javax.management.remote.JMXServerErrorException;
import javax.management.remote.JMXServiceURL;
import javax.naming.Context;
public class MyConnection {
private static MBeanServerConnection connection;
private static JMXConnector connector;
private static final ObjectName service;
static {
try {
service = new ObjectName("com.bea:Name=DomainRuntimeService,Type=weblogic.management.mbeanservers.domainruntime.DomainRuntimeServiceMBean");
catch (MalformedObjectNameException e) {
throw new AssertionError(e.getMessage());
* Initialize connection to the Domain Runtime MBean Server.
@SuppressWarnings("unchecked")
public static void initConnection(String hostname, String portString,
String username, String password) throws IOException,
MalformedURLException {
String protocol = "t3";
Integer portInteger = Integer.valueOf(portString);
int port = portInteger.intValue();
String jndiroot = "/jndi/";
String mserver = "weblogic.management.mbeanservers.domainruntime";
JMXServiceURL serviceURL = new JMXServiceURL(protocol, hostname, port,
jndiroot + mserver);
Hashtable h = new Hashtable();
h.put(Context.SECURITY_PRINCIPAL, username);
h.put(Context.SECURITY_CREDENTIALS, password);
h.put(JMXConnectorFactory.PROTOCOL_PROVIDER_PACKAGES,"weblogic.management.remote");
h.put("jmx.remote.x.request.waiting.timeout", new Long(10000));
try {
connector = JMXConnectorFactory.connect(serviceURL, h);
connection = connector.getMBeanServerConnection();
} catch(JMXServerErrorException jmxSE)
jmxSE.printStackTrace();
catch(Exception ex)
ex.printStackTrace();
public static String getLogSeverity(String hostName, String portName, String userName, String password) throws Exception {
initConnection(hostName, portName, userName,password);
connector.close();
ObjectName domainConfig = (ObjectName) connection.getAttribute(service,
"DomainConfiguration");
ObjectName logMbean =(ObjectName) connection.getAttribute(domainConfig, "Log");
String logFileFilter = (String) connection.getAttribute(logMbean, "LogFileSeverity");
System.out.println("Log File Filter= "+ logFileFilter.toString());
return logFileFilter;
public static boolean isProductionModeEnabled(String hostName, String portName, String userName, String password) throws Exception {
initConnection(hostName, portName, userName,password);
connector.close();
ObjectName domainConfig = (ObjectName) connection.getAttribute(service,
"DomainConfiguration");
boolean prodEnabled= (Boolean) connection.getAttribute(domainConfig, "ProductionModeEnabled");
System.out.println("Is Production Mode Enabled=" +prodEnabled);
return prodEnabled;
Make sure you have wlclient.jar and wljmxclient.jar as your dependent libraries. -
How to identify whether my query is been already transported or not?
Hi all,
How to identify whether any transport request are created for my query. And also how to identify whether the query in the production is been transported to the QA.
Thanxs
HarithaHi haritha,
Once the request is generated u can write the request number and chk in the other server STMS ...if u find the request thr ur transportation should be sucessful
chk this link...
http://help.sap.com/saphelp_nw04/helpdata/en/b5/1d733b73a8f706e10000000a11402f/content.htm
It is very simple ,
Goto RSA1> Trasport connections> drag & drop ur query to right side panel--> observe the coulmns ( pakage column ) --> If the pakage is $TMP u can sy that that perticular query is not transported ---> If it other than $TMP ( That query has Transported alreay).
Assign points if helpful
Cheers
Raj -
How to validate inserted xml data in oracle is correct or not
(i.e.how to validate xml syntax and tags are correct)
XML data has been inserted in Oracle database.Once inserted
I want to validate that data entered and tags inserted are correct
or not.
Pl helpSome small remarks after a life time of write that small notepad.
Don't use XMLIsValid() - Apperently it was once ment for use in table constraints only AND the most annoying part, it doesn't give you a proper error message.
More usable is schemaValidate() - it throws a useful error message... I never came around to update that post or write a proper one while using schemaValidate().
I would be against advising / using a Java wrapper to achieve this goal unless you are on a pre 9.2 database version. Registering, validation and such is optimized (in memory) in Oracle from the beginning in 9.2.0.3 and onwards to avoid for instance reparsing of the XML Schema itself. If a XML Schema is registered a lot is optimized including DOM, which will be avoided and "outsmarted" by using XOB objects (see the Oracle manuals only a few hits and those will point you directly to the optimizations at hand).
Maybe you are looking for
-
IPod Touch stuck on "syncing"...
i really don't know what started this issue, starting today when i try and sync my ipod touch it just sticks on "syncing ipod touch" (waited 15+ minutes), doesn't say what it's sending as it would before. i can cancel the sync on the ipod touch with
-
Question about using views in joins
I have a question that is related to views. When a view is joined with another table, how does Oracle internally handle it? Does it create a temporary table that contains the resultant rows of the view and join that temorary table to the other table
-
Hello, i hope someone can help me with this tricky situation. The plan is to move AD from 2003R2 name "DC" to a server 2012 "DC2" I have made all the adjustments and transferred all the role to the new 2012 server, and both are now GC servers. The pr
-
Conversion from 10.1.2 to 10.1.3 and persistence Exception
We are in the process of migrating from ocj 10.1.2 to 10.1.3. We are implementing database replication of HttpSession. During that process we get a stack trace like this. It complains about an object not being able to be serialized. Any suggestions a
-
Hello everyone! I am newbie to LabVIEW with some previous experience programming in different languages. My goal is to build the application that upon my selection needs to give specific values from previously filled and prepared file. For example, I